Download or read book Modeling and Optimization of Parallel and Distributed Embedded Systems written by Arslan Munir and published by John Wiley & Sons. This book was released on 2016-02-08 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the state-of-the-art in research in parallel and distributed embedded systems, which have been enabled by developments in silicon technology, micro-electro-mechanical systems (MEMS), wireless communications, computer networking, and digital electronics. These systems have diverse applications in domains including military and defense, medical, automotive, and unmanned autonomous vehicles. The emphasis of the book is on the modeling and optimization of emerging parallel and distributed embedded systems in relation to the three key design metrics of performance, power and dependability. Key features: Includes an embedded wireless sensor networks case study to help illustrate the modeling and optimization of distributed embedded systems. Provides an analysis of multi-core/many-core based embedded systems to explain the modeling and optimization of parallel embedded systems. Features an application metrics estimation model; Markov modeling for fault tolerance and analysis; and queueing theoretic modeling for performance evaluation. Discusses optimization approaches for distributed wireless sensor networks; high-performance and energy-efficient techniques at the architecture, middleware and software levels for parallel multicore-based embedded systems; and dynamic optimization methodologies. Highlights research challenges and future research directions. The book is primarily aimed at researchers in embedded systems; however, it will also serve as an invaluable reference to senior undergraduate and graduate students with an interest in embedded systems research.
Download or read book Computer Science CACIC 2020 written by Patricia Pesado and published by Springer Nature. This book was released on 2021-05-04 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes revised selected papers from the 26th Argentine Congress on Computer Science, CACIC 2020, held in San Justo, Buenos Aires, Argentina in October 2020. Due to the COVID-19 pandemic the conference was held in a virtual mode. The 21 full papers and 3 short papers presented in this volume were carefully reviewed and selected from a total of 118 submissions. They were organized in topical sections named: intelligent agents and systems; distributed and parallel processing; computer technology applied to education; graphic computation, images and visualization; software engineering; databases and data mining; hardware architectures, networks, and operating systems; innovation in software systems; signal processing and real-time systems; innovation in computer science education; computer security; and digital governance and smart cities.
Download or read book Mobility of Visually Impaired People written by Edwige Pissaloux and published by Springer. This book was released on 2017-08-20 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the design of the new mobility assistive information and communication technologies (ICT) devices for the visually impaired. The book begins with a definition of the space concept, followed by the concept of interaction with a space during mobility and this interaction characteristics. The contributors will then examine the neuro-cognitive basis of space perception for mobility and different theories of space perception. The text presents the existing technologies for space perception (sense recovery with stem and iPS cells, implants, brain plasticity, sensory substitution devices, multi modal technologies, etc.), the newest technologies for mobility assistance design, the way the feedback on environment is conveyed to the end-user. Methods for formative and summative evaluations of the mobility devices will also be discussed. The book concludes with a look to the future trends in research and technology development for mobility assistive information and communication technologies.
Download or read book Model Based Design for Embedded Systems written by Gabriela Nicolescu and published by CRC Press. This book was released on 2018-09-03 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demands of increasingly complex embedded systems and associated performance computations have resulted in the development of heterogeneous computing architectures that often integrate several types of processors, analog and digital electronic components, and mechanical and optical components—all on a single chip. As a result, now the most prominent challenge for the design automation community is to efficiently plan for such heterogeneity and to fully exploit its capabilities. A compilation of work from internationally renowned authors, Model-Based Design for Embedded Systems elaborates on related practices and addresses the main facets of heterogeneous model-based design for embedded systems, including the current state of the art, important challenges, and the latest trends. Focusing on computational models as the core design artifact, this book presents the cutting-edge results that have helped establish model-based design and continue to expand its parameters. The book is organized into three sections: Real-Time and Performance Analysis in Heterogeneous Embedded Systems, Design Tools and Methodology for Multiprocessor System-on-Chip, and Design Tools and Methodology for Multidomain Embedded Systems. The respective contributors share their considerable expertise on the automation of design refinement and how to relate properties throughout this refinement while enabling analytic and synthetic qualities. They focus on multi-core methodological issues, real-time analysis, and modeling and validation, taking into account how optical, electronic, and mechanical components often interface. Model-based design is emerging as a solution to bridge the gap between the availability of computational capabilities and our inability to make full use of them yet. This approach enables teams to start the design process using a high-level model that is gradually refined through abstraction levels to ultimately yield a prototype. When executed well, model-based design encourages enhanced performance and quicker time to market for a product. Illustrating a broad and diverse spectrum of applications such as in the automotive aerospace, health care, consumer electronics, this volume provides designers with practical, readily adaptable modeling solutions for their own practice.
Download or read book Embedded System Design written by Daniel D. Gajski and published by Springer Science & Business Media. This book was released on 2009-08-14 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded System Design: Modeling, Synthesis and Verification introduces a model-based approach to system level design. It presents modeling techniques for both computation and communication at different levels of abstraction, such as specification, transaction level and cycle-accurate level. It discusses synthesis methods for system level architectures, embedded software and hardware components. Using these methods, designers can develop applications with high level models, which are automatically translatable to low level implementations. This book, furthermore, describes simulation-based and formal verification methods that are essential for achieving design confidence. The book concludes with an overview of existing tools along with a design case study outlining the practice of embedded system design. Specifically, this book addresses the following topics in detail: . System modeling at different abstraction levels . Model-based system design . Hardware/Software codesign . Software and Hardware component synthesis . System verification This book is for groups within the embedded system community: students in courses on embedded systems, embedded application developers, system designers and managers, CAD tool developers, design automation, and system engineering.
Download or read book Model Driven Engineering and Software Development written by Philippe Desfray and published by Springer. This book was released on 2016-01-04 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes thoroughly revised and selected papers from the Third International Conference on Model-Driven Engineering and Software Development, MODELSWARD 2015, held in Angers, France, in February 2015. The 25 thoroughly revised and extended papers presented in this volume were carefully reviewed and selected from 94 submissions. They are organized in topical sections named: invited papers; modeling languages, tools and architectures; methodologies, processes and platforms; applications and software development.
Download or read book Proceedings of Fifth International Conference on Soft Computing for Problem Solving written by Millie Pant and published by Springer. This book was released on 2016-04-20 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of SocProS 2015 will serve as an academic bonanza for scientists and researchers working in the field of Soft Computing. This book contains theoretical as well as practical aspects using fuzzy logic, neural networks, evolutionary algorithms, swarm intelligence algorithms, etc., with many applications under the umbrella of ‘Soft Computing’. The book will be beneficial for young as well as experienced researchers dealing across complex and intricate real world problems for which finding a solution by traditional methods is a difficult task. The different application areas covered in the proceedings are: Image Processing, Cryptanalysis, Industrial Optimization, Supply Chain Management, Newly Proposed Nature Inspired Algorithms, Signal Processing, Problems related to Medical and Health Care, Networking Optimization Problems, etc.
Download or read book Large scale Kernel Machines written by Léon Bottou and published by MIT Press. This book was released on 2007 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solutions for learning from large scale datasets, including kernel learning algorithms that scale linearly with the volume of the data and experiments carried out on realistically large datasets. Pervasive and networked computers have dramatically reduced the cost of collecting and distributing large datasets. In this context, machine learning algorithms that scale poorly could simply become irrelevant. We need learning algorithms that scale linearly with the volume of the data while maintaining enough statistical efficiency to outperform algorithms that simply process a random subset of the data. This volume offers researchers and engineers practical solutions for learning from large scale datasets, with detailed descriptions of algorithms and experiments carried out on realistically large datasets. At the same time it offers researchers information that can address the relative lack of theoretical grounding for many useful algorithms. After a detailed description of state-of-the-art support vector machine technology, an introduction of the essential concepts discussed in the volume, and a comparison of primal and dual optimization techniques, the book progresses from well-understood techniques to more novel and controversial approaches. Many contributors have made their code and data available online for further experimentation. Topics covered include fast implementations of known algorithms, approximations that are amenable to theoretical guarantees, and algorithms that perform well in practice but are difficult to analyze theoretically. Contributors Léon Bottou, Yoshua Bengio, Stéphane Canu, Eric Cosatto, Olivier Chapelle, Ronan Collobert, Dennis DeCoste, Ramani Duraiswami, Igor Durdanovic, Hans-Peter Graf, Arthur Gretton, Patrick Haffner, Stefanie Jegelka, Stephan Kanthak, S. Sathiya Keerthi, Yann LeCun, Chih-Jen Lin, Gaëlle Loosli, Joaquin Quiñonero-Candela, Carl Edward Rasmussen, Gunnar Rätsch, Vikas Chandrakant Raykar, Konrad Rieck, Vikas Sindhwani, Fabian Sinz, Sören Sonnenburg, Jason Weston, Christopher K. I. Williams, Elad Yom-Tov
Download or read book Parallel and Distributed Computation Numerical Methods written by Dimitri Bertsekas and published by Athena Scientific. This book was released on 2015-03-01 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly acclaimed work, first published by Prentice Hall in 1989, is a comprehensive and theoretically sound treatment of parallel and distributed numerical methods. It focuses on algorithms that are naturally suited for massive parallelization, and it explores the fundamental convergence, rate of convergence, communication, and synchronization issues associated with such algorithms. This is an extensive book, which aside from its focus on parallel and distributed algorithms, contains a wealth of material on a broad variety of computation and optimization topics. It is an excellent supplement to several of our other books, including Convex Optimization Algorithms (Athena Scientific, 2015), Nonlinear Programming (Athena Scientific, 1999), Dynamic Programming and Optimal Control (Athena Scientific, 2012), Neuro-Dynamic Programming (Athena Scientific, 1996), and Network Optimization (Athena Scientific, 1998). The on-line edition of the book contains a 95-page solutions manual.
Download or read book Handbook of Research on Distributed Medical Informatics and E Health written by Lazakidou, Athina A. and published by IGI Global. This book was released on 2008-08-31 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides coverage of specific topics and issues in healthcare, highlighting recent trends and describing the latest advances in the field.
Download or read book Organic Computing written by Rolf P. Würtz and published by Springer Science & Business Media. This book was released on 2008-10-21 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the major ideas behind Organic Computing are delineated, together with a sparse sample of computational projects undertaken in this new field. Biological metaphors include evolution, neural networks, gene-regulatory networks, networks of brain modules, hormone system, insect swarms, and ant colonies. Applications are as diverse as system design, optimization, artificial growth, task allocation, clustering, routing, face recognition, and sign language understanding.
Download or read book Handbook on Data Centers written by Samee U. Khan and published by Springer. This book was released on 2015-03-16 with total page 1309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook offers a comprehensive review of the state-of-the-art research achievements in the field of data centers. Contributions from international, leading researchers and scholars offer topics in cloud computing, virtualization in data centers, energy efficient data centers, and next generation data center architecture. It also comprises current research trends in emerging areas, such as data security, data protection management, and network resource management in data centers. Specific attention is devoted to industry needs associated with the challenges faced by data centers, such as various power, cooling, floor space, and associated environmental health and safety issues, while still working to support growth without disrupting quality of service. The contributions cut across various IT data technology domains as a single source to discuss the interdependencies that need to be supported to enable a virtualized, next-generation, energy efficient, economical, and environmentally friendly data center. This book appeals to a broad spectrum of readers, including server, storage, networking, database, and applications analysts, administrators, and architects. It is intended for those seeking to gain a stronger grasp on data center networks: the fundamental protocol used by the applications and the network, the typical network technologies, and their design aspects. The Handbook of Data Centers is a leading reference on design and implementation for planning, implementing, and operating data center networks.
Download or read book Vector Models for Data parallel Computing written by Guy E. Blelloch and published by MIT Press (MA). This book was released on 1990 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematics of Computing -- Parallelism.
Download or read book Formal Modeling Actors Open Systems Biological Systems written by Gul Agha and published by Springer. This book was released on 2011-10-30 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Festschrift volume, published in honor of Carolyn Talcott on the occasion of her 70th birthday, contains a collection of papers presented at a symposium held in Menlo Park, California, USA, in November 2011. Carolyn Talcott is a leading researcher and mentor of international renown among computer scientists. She has made key contributions to a number of areas of computer science including: semantics and verification of progamming languages; foundations of actor-based systems; middleware, meta-architectures, and systems; Maude and rewriting logic; and computational biology. The 21 papers presented are organized in topical sections named: Essays on Carolyn Talcott; actors and programming languages; cyberphysical systems; middleware and meta-architectures; formal methods and reasoning tools; and computational biology.
Download or read book Intelligent Computing written by Kohei Arai and published by Springer Nature. This book was released on 2021-07-12 with total page 1184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive collection of chapters focusing on the core areas of computing and their further applications in the real world. Each chapter is a paper presented at the Computing Conference 2021 held on 15-16 July 2021. Computing 2021 attracted a total of 638 submissions which underwent a double-blind peer review process. Of those 638 submissions, 235 submissions have been selected to be included in this book. The goal of this conference is to give a platform to researchers with fundamental contributions and to be a premier venue for academic and industry practitioners to share new ideas and development experiences. We hope that readers find this volume interesting and valuable as it provides the state-of-the-art intelligent methods and techniques for solving real-world problems. We also expect that the conference and its publications is a trigger for further related research and technology improvements in this important subject.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Modelling and Fairness for Efficient Mobile Communication written by Ekhiotz Jon Vergara Alonso and published by Linköping University Electronic Press. This book was released on 2016-03-01 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy consumption and its management have been clearly identified as a challenge in computing and communication system design, where energy economy is obviously of paramount importance for battery powered devices. This thesis addresses the energy efficiency of mobile communication at the user end in the context of cellular networks. We argue that energy efficiency starts by energy awareness and propose EnergyBox, a parametrised tool that enables accurate and repeatable energy quantification at the user end using real data traffic traces as input. EnergyBox offers an abstraction of the underlying states for operation of the wireless interfaces and allows to estimate the energy consumption for different operator settings and device characteristics. The tool is used throughout the thesis to quantify and reveal inefficient data communication patterns of widely used mobile applications. We consider two different perspectives in the search of energy-efficient solutions. From the application perspective, we show that systematically quantifying the energy consumption of design choices (e.g., communication patterns, protocols, and data formats) contributes to a significantly smaller energy footprint. From the system perspective, we devise a cross-layer solution that schedules packet transmissions based on the knowledge of the network parameters that impact the energy consumption of the handset. These attempts show that application level decisions require a better understanding of possible energy apportionment policies at system level. Finally, we study the generic problem of determining the contribution of an entity (e.g., application) to the total energy consumption of a given system (e.g., mobile device). We compare the state-of-the-art policies in terms of fairness leveraging cooperative game theory and analyse their required information and computational complexity. We show that providing incentives to reduce the total energy consumption of the system (as part of fairness) is tightly coupled to the policy selection. Our study provides guidelines to select an appropriate policy depending on the characteristics of the system.
