Download or read book Modeling and Optimization of Materials and Structures written by Moussa Karama and published by Trans Tech Publications Ltd. This book was released on 2015-04-20 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objectives of this special issue (consisting mainly of a selection of extended papers presented at 5th International Symposium on AirCraft Materials ACMA 2014) are to push the current limits in modeling and computation in response to industrial and society challenges. It is also to control the calculations and models in a framework that takes into account the major sources of uncertainty to optimize materials and structures. Particular attention is given to the modeling and validation of composite materials and structures.
Download or read book Topology Optimization Design of Heterogeneous Materials and Structures written by Daicong Da and published by John Wiley & Sons. This book was released on 2020-02-26 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book pursues optimal design from the perspective of mechanical properties and resistance to failure caused by cracks and fatigue. The book abandons the scale separation hypothesis and takes up phase-field modeling, which is at the cutting edge of research and is of high industrial and practical relevance. Part 1 starts by testing the limits of the homogenization-based approach when the size of the representative volume element is non-negligible compared to the structure. The book then introduces a non-local homogenization scheme to take into account the strain gradient effects. Using a phase field method, Part 2 offers three significant contributions concerning optimal placement of the inclusion phases. Respectively, these contributions take into account fractures in quasi-brittle materials, interface cracks and periodic composites. The topology optimization proposed has significantly increased the fracture resistance of the composites studied.
Download or read book Multiscale Modelling and Optimisation of Materials and Structures written by Tadeusz Burczynski and published by John Wiley & Sons. This book was released on 2022-05-19 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses the very topical, crucial and original subject of parameter identification and optimization within multiscale modeling methods Multiscale Modelling and Optimization of Materials and Structures presents an important and challenging area of research that enables the design of new materials and structures with better quality, strength and performance parameters as well as the creation of reliable models that take into account structural, material and topological properties at different scales. The authors’ approach is four-fold; 1) the basic principles of micro and nano scale modeling techniques; 2) the connection of micro and/or nano scale models with macro simulation software; 3) optimization development in the framework of multiscale engineering and the solution of identification problems; 4) the computer science techniques used in this model and advice for scientists interested in developing their own models and software for multiscale analysis and optimization. The authors present several approaches such as the bridging and homogenization methods, as well as the general formulation of complex optimization and identification problems in multiscale modelling. They apply global optimization algorithms based on robust bioinspired algorithms, proposing parallel and multi-subpopulation approaches in order to speed-up computations, and discuss several numerical examples of multiscale modeling, optimization and identification of composite and functionally graded engineering materials and bone tissues. Multiscale Modelling and Optimization of Materials and Structures is thereby a valuable source of information for young scientists and students looking to develop their own models, write their own computer programs and implement them into simulation systems. Describes micro and nano scale models developed by the authors along with case studies of analysis and optimization Discusses the problems of computing costs, efficiency of information transfer, effective use of the computer memory and several other aspects of development of multiscale models Includes real physical, chemical and experimental studies with modern experimental techniques Provides a valuable source of information for young scientists and students looking to develop their own models, write their own computer programs, and implement them into simulation systems.
Download or read book Optimization of Structural Topology Shape and Material written by Martin P. Bendsoe and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past, the possibilities of structural optimization were restricted to an optimal choice of profiles and shape. Further improvement can be obtained by selecting appropriate advanced materials and by optimizing the topology, i.e. finding the best position and arrangement of structural elements within a construction. The optimization of structural topology permits the use of optimization algorithms at a very early stage of the design process. The method presented in this book has been developed by Martin Bendsoe in cooperation with other researchers and can be considered as one of the most effective approaches to the optimization of layout and material design.
Download or read book Optimization of Structures and Components written by Pablo Andrés Muñoz-Rojas and published by Springer Science & Business Media. This book was released on 2013-09-03 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an international group of active researchers in the field, this volume presents innovative formulations and applied procedures for sensitivity analysis and structural design optimization. Eight chapters discuss subjects ranging from recent developments in the determination and application of topological gradients, to the use of evolutionary algorithms and meta-models to solve practical engineering problems. With such a comprehensive set of contributions, the book is a valuable source of information for graduate students and researchers entering or working in the matter.
Download or read book Computational Modeling Optimization and Manufacturing Simulation of Advanced Engineering Materials written by Pablo Andrés Muñoz-Rojas and published by Springer. This book was released on 2016-06-20 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents recent research work focused in the development of adequate theoretical and numerical formulations to describe the behavior of advanced engineering materials. Particular emphasis is devoted to applications in the fields of biological tissues, phase changing and porous materials, polymers and to micro/nano scale modeling. Sensitivity analysis, gradient and non-gradient based optimization procedures are involved in many of the chapters, aiming at the solution of constitutive inverse problems and parameter identification. All these relevant topics are exposed by experienced international and inter institutional research teams resulting in a high level compilation. The book is a valuable research reference for scientists, senior undergraduate and graduate students, as well as for engineers acting in the area of computational material modeling.
Download or read book Multiscale Structural Topology Optimization written by Liang Xia and published by Elsevier. This book was released on 2016-04-27 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiscale Structural Topology Optimization discusses the development of a multiscale design framework for topology optimization of multiscale nonlinear structures. With the intention to alleviate the heavy computational burden of the design framework, the authors present a POD-based adaptive surrogate model for the RVE solutions at the microscopic scale and make a step further towards the design of multiscale elastoviscoplastic structures. Various optimization methods for structural size, shape, and topology designs have been developed and widely employed in engineering applications. Topology optimization has been recognized as one of the most effective tools for least weight and performance design, especially in aeronautics and aerospace engineering. This book focuses on the simultaneous design of both macroscopic structure and microscopic materials. In this model, the material microstructures are optimized in response to the macroscopic solution, which results in the nonlinearity of the equilibrium problem of the interface of the two scales. The authors include a reduce database model from a set of numerical experiments in the space of effective strain. Presents the first attempts towards topology optimization design of nonlinear highly heterogeneous structures Helps with simultaneous design of the topologies of both macroscopic structure and microscopic materials Helps with development of computer codes for the designs of nonlinear structures and of materials with extreme constitutive properties Focuses on the simultaneous design of both macroscopic structure and microscopic materials Includes a reduce database model from a set of numerical experiments in the space of effective strain
Download or read book The Feature Driven Method for Structural Optimization written by Weihong Zhang and published by Elsevier. This book was released on 2020-11-05 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Feature-Driven Method for Structural Optimization details a novel structural optimization method within a CAD framework, integrating structural optimization and feature-based design. The book presents cutting-edge research on advanced structures and introduces the feature-driven structural optimization method by regarding engineering features as basic design primitives. Consequently, it presents a method that allows structural optimization and feature design to be done simultaneously so that feature attributes are preserved throughout the design process. The book illustrates and supports the effectiveness of the method described, showing potential applications through numerical modeling techniques and programming. This volume presents a high-performance optimization method adapted to engineering structures—a novel perspective that will help engineers in the computation, modeling and design of advanced structures. - Integrates two independent methods - structural optimization and feature-based design—into one framework - Adapts the high performance optimization method to the practice of designing engineering structures - Provides numerical evidence for the effectiveness and potential of the methods described - Works within a computer-aided design framework to develop a novel structural optimization methodology - Presents engineering features as the basic design primitives in structural optimization
Download or read book PGD Based Modeling of Materials Structures and Processes written by Francisco Chinesta and published by Springer Science & Business. This book was released on 2014-04-23 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the development of a new simulation paradigm allowing for the solution of models that up to now have never been resolved and which result in spectacular CPU time savings (in the order of millions) that, combined with supercomputing, could revolutionize future ICT (information and communication technologies) at the heart of science and technology. The authors have recently proposed a new paradigm for simulation-based engineering sciences called Proper Generalized Decomposition, PGD, which has proved a tremendous potential in many aspects of forming process simulation. In this book a review of the basics of the technique is made, together with different examples of application.
Download or read book Multiscale Modeling and Simulation of Composite Materials and Structures written by Young Kwon and published by Springer Science & Business Media. This book was released on 2007-12-04 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in multiscale modeling and simulation techniques for composite materials and structures. It focuses on the structural and functional properties of engineering composites and the sustainable high performance of components and structures. The multiscale techniques can be also applied to nanocomposites which are important application areas in nanotechnology. There are few books available on this topic.
Download or read book Multiscale Optimization And Materials Design written by Jun Yan and published by World Scientific. This book was released on 2020-12-29 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a set of novel, efficient and systematic concurrent multiscale optimization methods by considering the distribution of the material in macro-scale and the unit-cell configuration design in micro-scale simultaneously. Different from the traditional optimization method that is performed in a single scale, the proposed methods could generate a great deal of improvements in structural performance through the multiscale structure-material concurrent optimum design.The proposed theory and methods are related to statics, dynamics, thermoelastics and the coupling of different physical fields. Therefore, it provides a comprehensive designing scheme when multiple factors are taken into account. For example, the designing scheme can have a great significance on enhancing the structural performances under coupled multi-physical fields, such as load bearing capacity, vibration resistance ability, and safety under thermal stress and so on.Several numerical examples are highlighted in this unique volume based on practical engineering applications. The examples collectively demonstrate drastically improved designs featuring excellent unit-cell configuration and highly regular macroscale material distribution in a variety of industrial applications.
Download or read book Variational Methods for Structural Optimization written by Andrej Cherkaev and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges a gap between a rigorous mathematical approach to variational problems and the practical use of algorithms of structural optimization in engineering applications. The foundations of structural optimization are presented in sufficiently simple form as to make them available for practical use.
Download or read book Multiscale Modelling and Optimisation of Materials and Structures written by Tadeusz Burczynski and published by Wiley. This book was released on 2022-05-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses the very topical, crucial and original subject of parameter identification and optimization within multiscale modeling methods Multiscale Modelling and Optimization of Materials and Structures presents an important and challenging area of research that enables the design of new materials and structures with better quality, strength and performance parameters as well as the creation of reliable models that take into account structural, material and topological properties at different scales. The authors’ approach is four-fold; 1) the basic principles of micro and nano scale modeling techniques; 2) the connection of micro and/or nano scale models with macro simulation software; 3) optimization development in the framework of multiscale engineering and the solution of identification problems; 4) the computer science techniques used in this model and advice for scientists interested in developing their own models and software for multiscale analysis and optimization. The authors present several approaches such as the bridging and homogenization methods, as well as the general formulation of complex optimization and identification problems in multiscale modelling. They apply global optimization algorithms based on robust bioinspired algorithms, proposing parallel and multi-subpopulation approaches in order to speed-up computations, and discuss several numerical examples of multiscale modeling, optimization and identification of composite and functionally graded engineering materials and bone tissues. Multiscale Modelling and Optimization of Materials and Structures is thereby a valuable source of information for young scientists and students looking to develop their own models, write their own computer programs and implement them into simulation systems. Describes micro and nano scale models developed by the authors along with case studies of analysis and optimization Discusses the problems of computing costs, efficiency of information transfer, effective use of the computer memory and several other aspects of development of multiscale models Includes real physical, chemical and experimental studies with modern experimental techniques Provides a valuable source of information for young scientists and students looking to develop their own models, write their own computer programs, and implement them into simulation systems.
Download or read book Scientific Modeling and Simulations written by Sidney Yip and published by Springer Science & Business Media. This book was released on 2010-04-07 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although computational modeling and simulation of material deformation was initiated with the study of structurally simple materials and inert environments, there is an increasing demand for predictive simulation of more realistic material structure and physical conditions. In particular, it is recognized that applied mechanical force can plausibly alter chemical reactions inside materials or at material interfaces, though the fundamental reasons for this chemomechanical coupling are studied in a material-speci c manner. Atomistic-level s- ulations can provide insight into the unit processes that facilitate kinetic reactions within complex materials, but the typical nanosecond timescales of such simulations are in contrast to the second-scale to hour-scale timescales of experimentally accessible or technologically relevant timescales. Further, in complex materials these key unit processes are “rare events” due to the high energy barriers associated with those processes. Examples of such rare events include unbinding between two proteins that tether biological cells to extracellular materials [1], unfolding of complex polymers, stiffness and bond breaking in amorphous glass bers and gels [2], and diffusive hops of point defects within crystalline alloys [3].
Download or read book Analysis Design and Optimization of Composite Structures written by Alexander L. Kalamkarov and published by John Wiley & Sons. This book was released on 1997-07-07 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapidly varying material and geometrical characteristics of composite materials and structures do not allow the direct study of their mechanical behavior even with the use of modern computers. This book is devoted to the mechanical design and optimization problems of composite structures, based on the previously developed asymptotic homogenization models and on the newly elaborated rigorous mathematical methods. It describes how to construct mathematically rigorous mechanical models to determine strength, stiffness, and weight minimization requirements, all important factors of design and optimization.
Download or read book Topology Design Methods for Structural Optimization written by Osvaldo M. Querin and published by Butterworth-Heinemann. This book was released on 2017-06-09 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topology Design Methods for Structural Optimization provides engineers with a basic set of design tools for the development of 2D and 3D structures subjected to single and multi-load cases and experiencing linear elastic conditions. Written by an expert team who has collaborated over the past decade to develop the methods presented, the book discusses essential theories with clear guidelines on how to use them. Case studies and worked industry examples are included throughout to illustrate practical applications of topology design tools to achieve innovative structural solutions. The text is intended for professionals who are interested in using the tools provided, but does not require in-depth theoretical knowledge. It is ideal for researchers who want to expand the methods presented to new applications, and includes a companion website with related tools to assist in further study. - Provides design tools and methods for innovative structural design, focusing on the essential theory - Includes case studies and real-life examples to illustrate practical application, challenges, and solutions - Features accompanying software on a companion website to allow users to get up and running fast with the methods introduced - Includes input from an expert team who has collaborated over the past decade to develop the methods presented
Download or read book Topology Optimization written by Martin Philip Bendsoe and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topology optimization method solves the basic enginee- ring problem of distributing a limited amount of material in a design space. The first edition of this book has become the standard text on optimal design which is concerned with the optimization of structural topology, shape and material. This edition, has been substantially revised and updated to reflect progress made in modelling and computational procedures. It also encompasses a comprehensive and unified description of the state-of-the-art of the so-called material distribution method, based on the use of mathematical programming and finite elements. Applications treated include not only structures but also materials and MEMS.
