Download or read book Maintenance Modeling and Optimization written by Mohamed Ben-Daya and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production costs are being reduced by automation, robotics, computer-integrated manufacturing, cost reduction studies and more. These new technologies are expensive to buy, repair, and maintain. Hence, the demand on maintenance is growing and its costs are escalating. This new environment is compelling industrial maintenance organizations to make the transition from fixing broken machines to higher-level business units for securing production capacity. On the academic front, research in the area of maintenance management and engineering is receiving tremendous interest from researchers. Many papers have appeared in the literature dealing with the modeling and solution of maintenance problems using operations research (OR) and management science (MS) techniques. This area represents an opportunity for making significant contributions by the OR and MS communities. Maintenance, Modeling, and Optimization provides in one volume the latest developments in the area of maintenance modeling. Prominent scholars have contributed chapters covering a wide range of topics. We hope that this initial contribution will serve as a useful informative introduction to this field that may permit additional developments and useful directions for more research in this fast-growing area. The book is divided into six parts and contains seventeen chapters. Each chapter has been subject to review by at least two experts in the area of maintenance modeling and optimization. The first chapter provides an introduction to major maintenance modeling areas illustrated with some basic models. Part II contains five chapters dealing with maintenance planning and scheduling. Part III deals with preventive maintenance in six chapters. Part IV focuses on condition-based maintenance and contains two chapters. Part V deals with integrated production and maintenance models and contains two chapters. Part VI addresses issues related to maintenance and new technologies, and also deals with Just-in-Time (JIT) and Maintenance.

Download or read book Modeling and Optimization of Maintenance Systems written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling and Optimization of Maintenance Systems written by Xiaoyue Jiang and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis focuses on modeling and optimization of maintenance systems. Although the terminology we use is within the domain of manufacturing industry, we can identify its potentials in IT sections, such as software reliability engineering and communication network management, to name a few. The basic problem we are attacking is how to arrange preventive replacement optimally based on the available information about the system's health condition. Instead of emphasizing the concrete models, which are extremely rich and diverse, we focus on the fundamental methodologies to grasp the essence of this subject. In Chapters 2 to 6, we propose five models, which can be roughly classified into two categories: age-based models (Chapters 2, 3 and 4) and condition-based models (Chapters 5 and 6). While each of the models is of its own practice interest, it serves also as the vehicle to convey the methodologies we integrated from the literature or developed in this thesis. We solve these models in a fairly unified manner. The unified methodology is further summarized in Chapter 7 in terms of a common modeling framework and the associated optimization procedure. We expect that this framework will be valuable for a wide range of applications.

Download or read book Planning and Control of Maintenance Systems written by Salih O. Duffuaa and published by Springer. This book was released on 2015-07-11 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analyzing maintenance as an integrated system with objectives, strategies and processes that need to be planned, designed, engineered, and controlled using statistical and optimization techniques, the theme of this book is the strategic holistic system approach for maintenance. This approach enables maintenance decision makers to view maintenance as a provider of a competitive edge not a necessary evil. Encompassing maintenance systems; maintenance strategic and capacity planning, planned and preventive maintenance, work measurements and standards, material (spares) control, maintenance operations and control, planning and scheduling, maintenance quality, training, and others, this book gives readers an understanding of the relevant methodology and how to apply it to real-world problems in industry. Each chapter includes a number exercises and is suitable as a textbook or a reference for a professionals and practitioners whilst being of interest to industrial engineering, mechanical engineering, electrical engineering, and industrial management students. It can also be used as a textbook for short courses on maintenance in industry. This text is the second edition of the book, which has four new chapters added and three chapters are revised substantially to reflect development in maintenance since the publication of the first edition. The new chapters cover reliability centered maintenance, total productive maintenance, e-maintenance and maintenance performance, productivity and continuous improvement.

Download or read book Planning and Control of Maintenance Systems written by Salih Duffuaa and published by John Wiley & Sons. This book was released on 1999 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Planning and Control of Maintenance Systems is the first book to address maintenance and repair from an engineering perspective. Using the innovative concept of total productive maintenance (TPM) and written by three renowned experts in statistics, operations research, and engineering, it is an essential tool for planning a maintenance system using statistical and optimization techniques in order to avert equipment failure. Suitable for engineers and managers in capital-intensive industry, as well as for first-year graduate students and undergraduates in mechanical or industrial engineering.

Download or read book Modeling and Optimization of Maintenance Systems microform written by Xiaoyue Jiang and published by National Library of Canada = Bibliothèque nationale du Canada. This book was released on 2001 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Research on Applied Optimization Methodologies in Manufacturing Systems written by Faruk Y?lmaz, Ömer and published by IGI Global. This book was released on 2017-11-30 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s manufacturing systems are undergoing significant changes in the aspects of planning, production execution, and delivery. It is imperative to stay up-to-date on the latest trends in optimization to efficiently create products for the market. The Handbook of Research on Applied Optimization Methodologies in Manufacturing Systems is a pivotal reference source including the latest scholarly research on heuristic models for solving manufacturing and supply chain related problems. Featuring exhaustive coverage on a broad range of topics such as assembly ratio, car sequencing, and color constraints, this publication is ideally designed for practitioners seeking new comprehensive models for problem solving in manufacturing and supply chain management.

Download or read book Discussion of the Paper application of Maintenance Optimization Models written by Christophe Gouin and published by GRIN Verlag. This book was released on 2011-05 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific Essay from the year 2011 in the subject Business economics - Business Management, Corporate Governance, grade: 19,5/20, University of Rennes 1, language: English, abstract: Maintenance management and optimization of maintenance is getting more and more important for a large number of companies. The use of automated machines and equip-ment in order to produce goods is very common today; hence companies have to rely on reliable machines which are available and working 100% of the time. In order to attain a flawless working factory, maintenance management is crucial. However companies cannot hope that the decisions they make concerning maintenance management are optimal and they start therefore to use decision support systems based on optimization methods. Also maintenance management is very complex and a lot of different decisions have to be made, like defining maintenance intervals, personal planning, when to buy spare parts, when to replace equipment etc. It is easier for companies to base their decisions on a mathematical program, and therefore the use of maintenance management optimization models arises. Optimization models proved to be very advantageous in other sectors, so it was just a matter of time before optimization methods where ported to maintenance man-agement. Problematic in the case of maintenance optimization are the very specific maintenance problems resulting in a large number of different maintenance optimization models. It is consequently very difficult to get a good overview about the different models and their application. R. Dekker, who has worked a lot on maintenance optimization and on operations research in maintenance management wrote a paper about maintenance optimization methods and their application, 'Application of maintenance optimization models: a review and analysis'. It summarizes maintenance management in general, gives a brief history of maintenance management, describes different optimization methods, their practical a

Download or read book Discussion of the paper Application of maintenance optimization models a review and analysis written by R Dekker written by Christophe Gouin and published by GRIN Verlag. This book was released on 2011-05-18 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific Essay from the year 2011 in the subject Business economics - Business Management, Corporate Governance, grade: 19,5/20, University of Rennes 1, language: English, abstract: Maintenance management and optimization of maintenance is getting more and more important for a large number of companies. The use of automated machines and equip-ment in order to produce goods is very common today; hence companies have to rely on reliable machines which are available and working 100% of the time. In order to attain a flawless working factory, maintenance management is crucial. However companies cannot hope that the decisions they make concerning maintenance management are optimal and they start therefore to use decision support systems based on optimization methods. Also maintenance management is very complex and a lot of different decisions have to be made, like defining maintenance intervals, personal planning, when to buy spare parts, when to replace equipment etc. It is easier for companies to base their decisions on a mathematical program, and therefore the use of maintenance management optimization models arises. Optimization models proved to be very advantageous in other sectors, so it was just a matter of time before optimization methods where ported to maintenance man-agement. Problematic in the case of maintenance optimization are the very specific maintenance problems resulting in a large number of different maintenance optimization models. It is consequently very difficult to get a good overview about the different models and their application. R. Dekker, who has worked a lot on maintenance optimization and on operations research in maintenance management wrote a paper about maintenance optimization methods and their application, ‘Application of maintenance optimization models: a review and analysis’. It summarizes maintenance management in general, gives a brief history of maintenance management, describes different optimization methods, their practical application, problems which can occur by applying the models etc. In this paper, I will discuss the work of R. Dekker; first of all there will be a description of the paper, explaining what it is about and giving a resume of important aspects. In the second section, the paper will be compared to other papers concerning maintenance opti-mization, different and identical aspects will be explained. Furthermore some information will be added in order to simplify the comprehension of maintenance optimization mod-els. Finally I will comment the paper, and give my opinion about the aspects that I liked and what I would describe differently.

Download or read book Handbook of Performability Engineering written by Krishna B. Misra and published by Springer Science & Business Media. This book was released on 2008-08-24 with total page 1331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dependability and cost effectiveness are primarily seen as instruments for conducting international trade in the free market environment. These factors cannot be considered in isolation of each other. This handbook considers all aspects of performability engineering. The book provides a holistic view of the entire life cycle of activities of the product, along with the associated cost of environmental preservation at each stage, while maximizing the performance.

Download or read book On the Maintenance Modeling and Optimization of Repairable Systems written by Suzan Alaswad and published by . This book was released on 2012 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of mathematical modeling for the purpose of analyzing and optimizing the performance of repairable systems is widely studied in the literature. In this dissertation, we study two different scenarios on the maintenance modeling and optimization of repairable systems. First, we study the long-run availability of a traditional repairable system that is subjected to imperfect corrective maintenance. We use Kijima's second virtual age model to describe the imperfect repair process. Because of the complexity of the underlying probability models, we use simulation modeling to estimate availability performance and meta-modeling to convert the reliability and maintainability parameters of the repairable system into an availability estimate without the simulation effort. As a last step, we add age-based, perfect preventive maintenance to our analysis. Second, we optimize a preventive maintenance policy for a two-component repairable system. When either component fails, instantaneous, minimal, and costly corrective maintenance is performed on the component. At equally-spaced, discrete points during the system's useful life, the decision-maker has the option to perform instantaneous, imperfect, and costly preventive maintenance on one or both of the components, to instantaneously replace one or both of the components, or to do nothing. We use a Genetic Algorithm in an attempt to find a cost-optimal set of preventive maintenance and replacement decisions.

Download or read book Introduction to Maintenance Engineering written by Mohamed Ben-Daya and published by John Wiley & Sons. This book was released on 2016-04-04 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory textbook links theory with practice using real illustrative cases involving products, plants and infrastructures and exposes the student to the evolutionary trends in maintenance. Provides an interdisciplinary approach which links, engineering, science, technology, mathematical modelling, data collection and analysis, economics and management Blends theory with practice illustrated through examples relating to products, plants and infrastructures Focuses on concepts, tools and techniques Identifies the special management requirements of various engineered objects (products, plants, and infrastructures)

Download or read book Introduction to Maintenance Engineering written by Mohamed Ben-Daya and published by John Wiley & Sons. This book was released on 2016-02-29 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory textbook links theory with practice using real illustrative cases involving products, plants and infrastructures and exposes the student to the evolutionary trends in maintenance. Provides an interdisciplinary approach which links, engineering, science, technology, mathematical modelling, data collection and analysis, economics and management Blends theory with practice illustrated through examples relating to products, plants and infrastructures Focuses on concepts, tools and techniques Identifies the special management requirements of various engineered objects (products, plants, and infrastructures)

Download or read book Reliability Modeling Analysis And Optimization written by Hoang Pham and published by World Scientific. This book was released on 2006-06-26 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: As our modern information-age society grows in complexity both in terms of embedded systems and applications, the problems and challenges in reliability become ever more complex. Bringing together many of the leading experts in the field, this volume presents a broad picture of current research on system modeling and optimization in reliability and its applications.The book comprises twenty-three chapters organized into four parts: Reliability Modeling, Software Quality Engineering, Software Reliability, and Maintenance and Inspection Policies. These sections cover a wide range of important topics, including system reliability modeling, optimization, software reliability and quality, maintenance theory and inspection, reliability failure analysis, sampling plans and schemes, software development processes and improvement, stochastic process modeling, statistical distributions and analysis, fault-tolerant performance, software measurements and cost effectiveness, queueing theory and applications, system availability, reliability of repairable systems, testing sampling inspection, software capability maturity model, accelerated life modeling, statistical control, and HALT testing.

Download or read book Technical System Maintenance written by Sylwia Werbińska-Wojciechowska and published by Springer. This book was released on 2019-01-09 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed introduction to maintenance policies and the current and future research in these fields, highlighting mathematical formulation and optimization techniques. It comprehensively describes the state of art in maintenance modelling and optimization for single- and multi-unit technical systems, and also investigates the problem of the estimation process of delay-time parameters and how this affects system performance. The book discusses delay-time modelling for multi-unit technical systems in various reliability structures, examining the optimum maintenance policies both analytically and practically, focusing on a delay-time modelling technique that has been employed by researchers in the field of maintenance engineering to model inspection intervals. It organizes the existing work into several fields, based mainly on the classification of single- and multi-unit models and assesses the applicability of the reviewed works and maintenance models. Lastly, it identifies potential future research directions and suggests research agendas. This book is a valuable resource for maintenance engineers, reliability specialists, and researchers, as it demonstrates the latest developments in maintenance, inspection and delay-time-based maintenance modelling issues. It is also of interest to graduate and senior undergraduate students, as it introduces current theory and practice in maintenance modelling issues, especially in the field of delay-time modelling.

Download or read book Selective Maintenance Modelling and Optimization written by Yu Liu and published by Springer Nature. This book was released on 2023-01-20 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a detailed introduction to selective maintenance and updates readers on recent advances in this field, emphasizing mathematical formulation and optimization techniques. The book is useful for reliability engineers and managers engaged in the practice of reliability engineering and maintenance management. It also provides references that will lead to further studies at the end of each chapter. This book is a reference for researchers in reliability and maintenance and can be used as an advanced text for students.

Download or read book Multi state System Reliability Assessment Optimization And Applications written by Gregory Levitin and published by World Scientific Publishing Company. This book was released on 2003-03-12 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most books on reliability theory are devoted to traditional binary reliability models allowing for only two possible states for a system and its components: perfect functionality and complete failure. However, many real-world systems are composed of multi-state components, which have different performance levels and several failure modes with various effects on the entire system performance (degradation). Such systems are called Multi-State Systems (MSS). The examples of MSS are power systems where the component performance is characterized by the generating capacity, computer systems where the component performance is characterized by the data processing speed, communication systems, etc.This book is the first to be devoted to Multi-State System (MSS) reliability analysis and optimization. It provides a historical overview of the field, presents basic concepts of MSS, defines MSS reliability measures, and systematically describes the tools for MSS reliability assessment and optimization. Basic methods for MSS reliability assessment, such as a Boolean methods extension, basic random process methods (both Markov and semi-Markov) and universal generating function models, are systematically studied. A universal genetic algorithm optimization technique and all details of its application are described. All the methods are illustrated by numerical examples. The book also contains many examples of application of reliability assessment and optimization methods to real engineering problems.The aim of this book is to give a comprehensive, up-to-date presentation of MSS reliability theory based on modern advances in this field and provide a theoretical summary and examples of engineering applications to a variety of technical problems. From this point of view the book bridges the gap between theoretical advances and practical reliability engineering.