Download or read book Modeling and Measurement of the Modal Properties of Hollow Core Photonic bandgap Fibers written by Kiarash Zamani Aghaie and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Hollow-core photonic-bandgap fibers (PBFs), which consist of an air core surrounded by a photonic-crystal array of air holes, have attracted significant attention due to their unique optical properties, and they have found interesting applications in sensing, nonlinear optics, and microscopy. The design and understanding of these fibers depend critically on our ability to model their optical properties accurately, a task made difficult by the complexity and very fine features (
Download or read book Hollow Core Optical Fbers written by Walter Belardi and published by MDPI. This book was released on 2019-07-29 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue Hollow core optical fibers that was published in Fibers
Download or read book Handbook of Optoelectronics written by John P. Dakin and published by CRC Press. This book was released on 2017-10-10 with total page 1429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Optoelectronics offers a self-contained reference from the basic science and light sources to devices and modern applications across the entire spectrum of disciplines utilizing optoelectronic technologies. This second edition gives a complete update of the original work with a focus on systems and applications. Volume I covers the details of optoelectronic devices and techniques including semiconductor lasers, optical detectors and receivers, optical fiber devices, modulators, amplifiers, integrated optics, LEDs, and engineered optical materials with brand new chapters on silicon photonics, nanophotonics, and graphene optoelectronics. Volume II addresses the underlying system technologies enabling state-of-the-art communications, imaging, displays, sensing, data processing, energy conversion, and actuation. Volume III is brand new to this edition, focusing on applications in infrastructure, transport, security, surveillance, environmental monitoring, military, industrial, oil and gas, energy generation and distribution, medicine, and free space. No other resource in the field comes close to its breadth and depth, with contributions from leading industrial and academic institutions around the world. Whether used as a reference, research tool, or broad-based introduction to the field, the Handbook offers everything you need to get started. (The previous edition of this title was published as Handbook of Optoelectronics, 9780750306461.) John P. Dakin, PhD, is professor (emeritus) at the Optoelectronics Research Centre, University of Southampton, UK. Robert G. W. Brown, PhD, is chief executive officer of the American Institute of Physics and an adjunct full professor in the Beckman Laser Institute and Medical Clinic at the University of California, Irvine.
Download or read book Optics Letters written by and published by . This book was released on 2008 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Properties and Applications of Solid Core Photonic Bandgap Fibers written by Paul Steinvurzel and published by . This book was released on 2007 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Microstructured Fibers for Hollow Core Guidance written by Guangrui Li and published by . This book was released on 2022* with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Instead of the traditional index guidance, microstructured fibers can guide light in a core of refractive index lower than that of its cladding using mechanisms like photonic band gap guidance, inhibited coupling guidance and anti-resonant guidance. Their guidance is usually leaky and depends on the photonic properties of their structured cladding. Specifically, photonic band gap guidance is possible with photonic crystals, whose photonic band gaps appear below the refractive index index of the core. Guidance in a low-index core or hollow core guidance, is of interest for applications in the fields of bioanalytic, quantum gas, lasers and others that involve interacting of the light with confined matter of low refractive index. My work is aimed at investigating the possibility of hollow core guidance with an all-solid microstructured cladding. Ideally, such a hollow core waveguide is expected to have obvious guidance advantages over capillaries. Besides, it also surpasses the holey hollow core band gap fibers in the optofluidic applications by avoiding undesired penetration of the liquid into the cladding channels. To achieve the design of the ideal hollow core waveguide, I developed two models for all relevant modes in microstructured fibers: an analytical method with binary functions and a reflection-based planar model. While the binary functions for photonic band gap is more about ideal periodic structures extended into infinite, the reflection and transmission analysis with a reflection-based planar model is more practical to be used for waveguides with finite periodic structures and deliberately induced disorder.
Download or read book Plastic Optical Fiber Sensors written by Marcelo M. Werneck and published by CRC Press. This book was released on 2019-11-25 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Optical Fiber Sensors cover the fundamentals and applications of a new class of fiber sensors. With contributions from leading academics in the area, this book covers the theory of plastic optical fiber sensors or (POFs), as well as applications in oil, gas, biotechnology, and energy fields. Using multiple examples, the editors showcase the advantageous characteristics of POFs, such as ease of handling, large diameter, inexpensive peripheral components and simple termination tools. By doing so, the editors assert that there has been a proliferation of the use of POFs in new consumer products. The book also highlights uses for building various products, such as a POF sensor for oil trucker valve monitoring, a monitoring system for high voltage substation switch, an oil leaking sensor for offshore platforms and a solar tracker for illumination. Including over 300 black and white images, this book would be highly beneficial for professionals in manufacturing as well as academics in universities, particularly those who use optical fiber sensors on a regular basis.
Download or read book Photonic Crystals written by John D. Joannopoulos and published by Princeton University Press. This book was released on 2011-10-30 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since it was first published in 1995, Photonic Crystals has remained the definitive text for both undergraduates and researchers on photonic band-gap materials and their use in controlling the propagation of light. This newly expanded and revised edition covers the latest developments in the field, providing the most up-to-date, concise, and comprehensive book available on these novel materials and their applications. Starting from Maxwell's equations and Fourier analysis, the authors develop the theoretical tools of photonics using principles of linear algebra and symmetry, emphasizing analogies with traditional solid-state physics and quantum theory. They then investigate the unique phenomena that take place within photonic crystals at defect sites and surfaces, from one to three dimensions. This new edition includes entirely new chapters describing important hybrid structures that use band gaps or periodicity only in some directions: periodic waveguides, photonic-crystal slabs, and photonic-crystal fibers. The authors demonstrate how the capabilities of photonic crystals to localize light can be put to work in devices such as filters and splitters. A new appendix provides an overview of computational methods for electromagnetism. Existing chapters have been considerably updated and expanded to include many new three-dimensional photonic crystals, an extensive tutorial on device design using temporal coupled-mode theory, discussions of diffraction and refraction at crystal interfaces, and more. Richly illustrated and accessibly written, Photonic Crystals is an indispensable resource for students and researchers. Extensively revised and expanded Features improved graphics throughout Includes new chapters on photonic-crystal fibers and combined index-and band-gap-guiding Provides an introduction to coupled-mode theory as a powerful tool for device design Covers many new topics, including omnidirectional reflection, anomalous refraction and diffraction, computational photonics, and much more.
Download or read book Measurement of Thermal Dependencies of PBG Fiber Properties written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Photonic crystal fibers (PCFs) represent a class of optical fibers which have a wide spectrum of applications in the telecom and sensing industries. Currently, the Advanced Accelerator Research Department at SLAC is developing photonic bandgap particle accelerators, which are photonic crystal structures with a central defect used to accelerate electrons and achieve high longitudinal electric fields. Extremely compact and less costly than the traditional accelerators, these structures can support higher accelerating gradients and will open a new era in high energy physics as well as other fields of science. Based on direct laser acceleration in dielectric materials, the so called photonic band gap accelerators will benefit from mature laser and semiconductor industries. One of the key elements to direct laser acceleration in hollow core PCFs, is maintaining thermal and structural stability. Previous simulations demonstrate that accelerating modes are sensitive to the geometry of the defect region and the variations in the effective index. Unlike the telecom modes (for which over 95% of the energy propagates in the hollow core) most of the power of these modes is located in the glass at the periphery of the central hole which has a higher thermal constant than air ([gamma]{sub SiO{sub 2}} = 1.19 x 10−6 1/K, [gamma]{sub air} = -9 x 10−7 1/K with [gamma] = dn/dT). To fully control laser driven acceleration, we need to evaluate the thermal and structural consequences of such modes on the PCFs. We are conducting series of interferometric tests to quantify the dependencies of the HC-633-02 (NKT Photonics) propagation constant (k{sub z}) on temperature, vibration amplitude, stress and electric field strength. In this paper we will present the theoretical principles characterizing the thermal behavior of a PCF, the measurements realized for the fundamental telecom mode (TE00), and the experimental demonstration of TM-like mode propagation in the HC-633-02 fiber.
Download or read book Photonic Crystals and Fibers written by Bozena Jaskorzynska and published by SPIE-International Society for Optical Engineering. This book was released on 2005 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of SPIE present the original research papers presented at SPIE conferences and other high-quality conferences in the broad-ranging fields of optics and photonics. These books provide prompt access to the latest innovations in research and technology in their respective fields. Proceedings of SPIE are among the most cited references in patent literature.
Download or read book Photonic Crystals Physics and Technology written by Concita Sibilia and published by Springer Science & Business Media. This book was released on 2009-02-03 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the work is give an overview of the activity in the field of Photonic Crystal developed in the frame of COST P11 action . The main objective of the COST P11 action was to unify and coordinate national efforts aimed at studying linear and nonlinear optical interactions with Photonic Crystals (PCs), without neglecting an important aspect related to the material research as idea and methods of realizations of 3D PC, together with the development and implementation of measurement techniques for the experimental evaluation of their potential applications in different area, as for example telecommunication with novel optical fibers, lasers, nonlinear multi-functionality, display devices, opto-electronics, sensors. The book contains contributions from authors who gave their lecture at the Cost P11 Training School.
Download or read book FOUNDATIONS FOR MICROWAVE ENGINEERING 2ND ED written by Robert E. Collin and published by John Wiley & Sons. This book was released on 2007 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt: About The Book: The book covers the major topics of microwave engineering. Its presentation defines the accepted standard for both advanced undergraduate and graduate level courses on microwave engineering. It is an essential reference book for the practicing microwave engineer
Download or read book Photonic Crystal Fibres written by Anders Bjarklev and published by Springer Science & Business Media. This book was released on 2003-09-30 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photonic Crystal Fibres describes the fundamental properties of the optical waveguides known under the terms of photonic crystal fibres, microstructured fibres, or holey fibres. It outlines how the fibres are designed and fabricated, and how they are treated from a theoretical and numerical point of view. The book presents a detailed description of the different classes of photonic crystal and photonic bandgap fibres, and it broadens out a spectrum of novel applications and new fibre types.
Download or read book Handbook of Optical Fibers written by Gang-Ding Peng and published by Springer. This book was released on 2019-08-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research- and application-oriented book covers main topical areas of optical fibers. The selection of the chapters is weighted on technological and application-specific topics, very much a reflection of where research is heading to and what researchers are looking for. Chapters are arranged in a user-friendly format essentially self-contained and with extensive cross-references. They are organized in the following sections: - Optical Fiber Communication | Editors: Ming-Jun Li and Chao Lu - Solitons and Nonlinear Waves in Optical Fibers | Editor: Boris A. Malomed - Optical Fiber Fabrication | Editor: Hairul Azhar Bin Abdul Rashid - Active Optical Fibers | Editor: Kyunghwan Oh - Special Optical Fibers | Editors: Perry Shum and Zhilin Xu - Optical Fiber Measurement | Editor: Jianzhong Zhang - Optical Fiber Devices | Editors: John Canning and Tuan Guo - Optical Fiber Device Measurement | Editor: Yanhua Luo - Distributed Optical Fiber Sensing | Editor: Yosuke Mizuno - Optical Fiber Sensors for Industrial Applications | Editor: Tong Sun OBE - Polymer Optical Fiber Sensing | Editor: Ginu Rajan - Photonic Crystal Fiber Sensing | Editor: D. N. Wang - Optical Fiber Microfluidic Sensors | Editor: Yuan Gong
Download or read book Microwave and Wireless Synthesizers written by Ulrich L. Rohde and published by John Wiley & Sons. This book was released on 2021-04-27 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of the leading resource on designing digital frequency synthesizers from microwave and wireless applications, fully updated to reflect the most modern integrated circuits and semiconductors Microwave and Wireless Synthesizers: Theory and Design, Second Edition, remains the standard text on the subject by providing complete and up-to-date coverage of both practical and theoretical aspects of modern frequency synthesizers and their components. Featuring contributions from leading experts in the field, this classic volume describes loop fundamentals, noise and spurious responses, special loops, loop components, multiloop synthesizers, and more. Practical synthesizer examples illustrate the design of a high-performance hybrid synthesizer and performance measurement techniques—offering readers clear instruction on the various design steps and design rules. The second edition includes extensively revised content throughout, including a modern approach to dealing with the noise and spurious response of loops and updated material on digital signal processing and architectures. Reflecting today's technology, new practical and validated examples cover a combination of analog and digital synthesizers and hybrid systems. Enhanced and expanded chapters discuss implementations of direct digital synthesis (DDS) architectures, the voltage-controlled oscillator (VCO), crystal and other high-Q based oscillators, arbitrary waveform generation, vector signal generation, and other current tools and techniques. Now requiring no additional literature to be useful, this comprehensive, one-stop resource: Provides a fully reviewed, updated, and enhanced presentation of microwave and wireless synthesizers Presents a clear mathematical method for designing oscillators for best noise performance at both RF and microwave frequencies Contains new illustrations, figures, diagrams, and examples Includes extensive appendices to aid in calculating phase noise in free-running oscillators, designing VHF and UHF oscillators with CAD software, using state-of-the-art synthesizer chips, and generating millimeter wave frequencies using the delay line principle Containing numerous designs of proven circuits and more than 500 relevant citations from scientific journal and papers, Microwave and Wireless Synthesizers: Theory and Design, Second Edition, is a must-have reference for engineers working in the field of radio communication, and the perfect textbook for advanced electrical engineering students.
Download or read book Microstructured Polymer Optical Fibres written by Maryanne Large and published by Springer Science & Business Media. This book was released on 2007-08-29 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with a clear overview of the considerable body of research and development work carried out in the last five years on microstructured polymer optical fibres (mPOFs). It discusses new applications which will be opened up by this emerging technology and includes for the first time details about the fabrication process for these fibres. The book provides an excellent introduction to this new technology.
Download or read book Lab on Fiber Technology written by Andrea Cusano and published by Springer. This book was released on 2014-07-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on a research field that is rapidly emerging as one of the most promising ones for the global optics and photonics community: the “lab-on-fiber” technology. Inspired by the well-established "lab on-a-chip" concept, this new technology essentially envisages novel and highly functionalized devices completely integrated into a single optical fiber for both communication and sensing applications. Based on the R&D experience of some of the world's leading authorities in the fields of optics, photonics, nanotechnology, and material science, this book provides a broad and accurate description of the main developments and achievements in the lab-on-fiber technology roadmap, also highlighting the new perspectives and challenges to be faced. This book is essential for scientists interested in the cutting-edge fiber optic technology, but also for graduate students.
