Download or read book Modeling and Flowsheet Simulation of Vibrated Fluidized Bed Dryers Band 18 written by Sören Ernst Lehmann and published by Cuvillier Verlag. This book was released on 2021-12-07 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluidized bed dryers are the prime choice when it comes to drying of heat sensitive products, commonly processed in the pharmaceutical and food industry. As many products in these industries are fine and cohesive, mechanical vibration of the dryer is used to enable or improve fluidization. Thus, the goal of this thesis is the development of a fluidized bed drying model that accounts for the influence of mechanical vibration of the dryer, as well as its implementation in an open-source flowsheet simulation framework. Continuously operated fluidized bed dryers under steady-state conditions are the focus of this thesis. The aim during model development and implementation is the broadest possible application range of the model. A custom-built vibrated fluidized bed dryer is designed and constructed for comprehensive investigations of fluidized bed hydrodynamics and drying kinetics. Based on experimental investigations, a semi-empirical model for hydrodynamics of fine and cohesive powders is developed. The new model is combined with established models to allow for the flowsheet simulation of fluidized bed dryers for particles of all Geldart groups. Additionally, the influence of vibration is accounted for. Comprehensive validation experiments are performed for particles of different Geldart groups, different dryer geometries and a variety of process parameters, including mechanical vibration. Comparison of model predictions with experimental data attributes high accuracy of predicted particle and gas properties. Furthermore, sensitivity analyses are conducted to identify potential weaknesses in underlying model assumptions. Hereby, the validity of underlying assumptions is confirmed and potential optimization parameters for different applications are identified. The proposed model is unprecedented in terms of range of process parameters, variety of particle properties and dryer geometries, tested and found valid for.
Download or read book Dynamic Flowsheet Simulation of Solids Processes and Its Application to Fluidized Bed Spray Granulation written by Maksym Dosta and published by . This book was released on 2015-10 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. New discussion of conceptual plant design, flowsheet development and revamp design Significantly increased coverage of capital cost estimation, process costing and economics New chapters on equipment selection, reactor design and solids handling processes New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography Increased coverage of batch processing, food, pharmaceutical and biological processes All equipment chapters in Part II revised and updated with current information Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards Additional worked examples and homework problems The most complete and up to date coverage of equipment selection 108 realistic commercial design projects from diverse industries A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Fluidized Bed Reactors Processes and Operating Conditions written by John G. Yates and published by Springer. This book was released on 2016-09-27 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fluidized-bed reactor is the centerpiece of industrial fluidization processes. This book focuses on the design and operation of fluidized beds in many different industrial processes, emphasizing the rationale for choosing fluidized beds for each particular process. The book starts with a brief history of fluidization from its inception in the 1940’s. The authors present both the fluid dynamics of gas-solid fluidized beds and the extensive experimental studies of operating systems and they set them in the context of operating processes that use fluid-bed reactors. Chemical engineering students and postdocs as well as practicing engineers will find great interest in this book.
Download or read book Fluid Bed Technology in Materials Processing written by C. K. Gupta and published by CRC Press. This book was released on 1998-12-28 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Bed Technology in Materials Processing comprehensively covers the various aspects of fluidization engineering and presents an elaborate examination of the applications in a multitude of materials processing techniques. This singular resource discusses: All the basic aspects of fluidization essential to understand and learn about various techniques The range of industrial applications Several examples in extraction and process metallurgy Fluidization in nuclear engineering and nuclear fuel cycle with numerous examples Innovative techniques and several advanced concepts of fluidization engineering, including use and applications in materials processing as well as environmental and bio-engineering Pros and cons of various fluidization equipment and specialty of their applications, including several examples Design aspects and modeling Topics related to distributors effects and flow regimes A separate chapter outlines the importance of fluidization engineering in high temperature processing, including an analysis of the fundamental concepts and applications of high temperature fluidized bed furnaces for several advanced materials processing techniques. Presenting information usually not available in a single source, Fluid Bed Technology in Materials Processing serves Fluidization engineers Practicing engineers in process metallurgy, mineral engineering, and chemical metallurgy Researchers in the field of chemical, metallurgical, nuclear, biological, environmental engineering Energy engineering professionals High temperature scientists and engineers Students and professionals who adopt modeling of fluidization in their venture for design and scale up
Download or read book Process Modelling and Simulation written by César de Prada and published by MDPI. This book was released on 2019-09-23 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since process models are nowadays ubiquitous in many applications, the challenges and alternatives related to their development, validation, and efficient use have become more apparent. In addition, the massive amounts of both offline and online data available today open the door for new applications and solutions. However, transforming data into useful models and information in the context of the process industry or of bio-systems requires specific approaches and considerations such as new modelling methodologies incorporating the complex, stochastic, hybrid and distributed nature of many processes in particular. The same can be said about the tools and software environments used to describe, code, and solve such models for their further exploitation. Going well beyond mere simulation tools, these advanced tools offer a software suite built around the models, facilitating tasks such as experiment design, parameter estimation, model initialization, validation, analysis, size reduction, discretization, optimization, distributed computation, co-simulation, etc. This Special Issue collects novel developments in these topics in order to address the challenges brought by the use of models in their different facets, and to reflect state of the art developments in methods, tools and industrial applications.
Download or read book Handbook of Industrial Drying written by Arun S. Mujumdar and published by CRC Press. This book was released on 2006-11-08 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Still the Most Complete, Up-To-Date, and Reliable Reference in the FieldDrying is a highly energy-intensive operation and is encountered in nearly all industrial sectors. With rising energy costs and consumer demands for higher quality dried products, it is increasingly important to be aware of the latest developments in industrial drying technolog
Download or read book Advances in Drying written by Arun S. Mujumdar and published by CRC Press. This book was released on with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Continuous Pharmaceutical Processing written by Zoltan K Nagy and published by Springer Nature. This book was released on 2020-06-10 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous pharmaceutical manufacturing is currently receiving much interest from industry and regulatory authorities, with the joint aim of allowing rapid access of novel therapeutics and existing medications to the public, without compromising high quality. Research groups from different academic institutions have significantly contributed to this field with an immense amount of published research addressing a variety of topics related to continuous processing. The book is structured to have individual chapters on the different continuous unit operations involved in drug substance and drug product manufacturing. A wide spectrum of topics are covered, including basic principles of continuous manufacturing, applications of continuous flow chemistry in drug synthesis, continuous crystallization, continuous drying, feeders and blenders, roll compaction and continuous wet granulation.The underlying theme for each of these chapters is to present to the reader the recent advances in modeling, experimental investigations and equipment design as they pertain to each individual unit operation. The book also includes chapters on quality by design (QbD) and process analytical technology (PAT) for continuous processing, process control strategies including new concepts of quality-by-control (QbC), real-time process management and plant optimization, business and supply chain considerations related to continuous manufacturing as well as safety guidelines related to continuous chemistry. A separate chapter is dedicated to discussing regulatory aspects of continuous manufacturing, with description of current regulatory environment quality/GMP aspects, as well as regulatory gaps and challenges. Our aim from publishing this book is to make it a valuable reference for readers interested in this topic, with a desire to gain a fundamental understanding of engineering principles and mechanistic studies utilized in understanding and developing continuous processes. In addition, our advanced readers and practitioners in this field will find that the technical content of Continuous Pharmaceutical Processing is at the forefront of recent technological advances, with coverage of future prospects and challenges for this technology.
Download or read book Fluidization Engineering written by D. Kunii and published by Elsevier. This book was released on 2013-10-22 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluidization Engineering, Second Edition, expands on its original scope to encompass these new areas and introduces reactor models specifically for these contacting regimes. Completely revised and updated, it is essentially a new book. Its aim is to distill from the thousands of studies those particular developments that are pertinent for the engineer concerned with predictive methods, for the designer, and for the user and potential user of fluidized beds. Covers the recent advances in the field of fluidization. Presents the studies of developments necessary to the engineers, designers, and users of fluidized beds.
Download or read book Modeling and Simulation of Mineral Processing Systems written by R. Peter King and published by Elsevier. This book was released on 2012-12-02 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr. R. Peter King covers the field of quantitative modeling of mineral processing equipment and the use of these models to simulate the actual behavior of ore dressing and coal washing as they are configured to work in industrial practice. The material is presented in a pedagogical style that is particularly suitable for readers who wish to learn the wide variety of modeling methods that have evolved in this field. The models vary widely from one unit type to another. As a result each model is described in some detail. Wherever possible model structure is related to the underlying physical processes that govern the behaviour of particulate material in the processing equipment. Predictive models are emphasised throughout so that, when combined, they can be used to simulate the operation of complex mineral processing flowsheets. The development of successful simulation techniques is a major objective of the work that is covered in the text. Covers all aspects of modeling and simulation Provides all necessary tools to put the theory into practice
Download or read book Handbook of Fluidization and Fluid Particle Systems written by Wen-Ching Yang and published by CRC Press. This book was released on 2003-03-19 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference details particle characterization, dynamics, manufacturing, handling, and processing for the employment of multiphase reactors, as well as procedures in reactor scale-up and design for applications in the chemical, mineral, petroleum, power, cement and pharmaceuticals industries. The authors discuss flow through fixed beds, elutriation and entrainment, gas distributor and plenum design in fluidized beds, effect of internal tubes and baffles, general approaches to reactor design, applications for gasifiers and combustors, dilute phase pneumatic conveying, and applications for chemical production and processing. This is a valuable guide for chemists and engineers to use in their day-to-day work.
Download or read book Advanced Drying Technologies written by Tadeusz Kudra and published by CRC Press. This book was released on 2009-02-11 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents Drying Breakthroughs for an Array of Materials Despite being one of the oldest, most energy-intensive unit operations, industrial drying is perhaps the least scrutinized technique at the microscopic level. Yet in the wake of today’s global energy crisis, drying research and development is on the rise. Following in the footsteps of the widely read first edition, Advanced Drying Technologies, Second Edition is the direct outcome of the recent phenomenal growth in drying literature and new drying hardware. This edition provides an evaluative overview of new and emerging drying technologies, while placing greater emphasis on making the drying process more energy efficient in the green age. Draws on the Authors’ 60+ Years of Combined Experience Fueled by the current energy crisis and growing consumer demand for improved quality products, this thoroughly updated resource addresses cutting-edge drying technologies for numerous materials such as high-valued, heat-sensitive pharmaceuticals, nutraceuticals, and some foods. It also introduces innovative techniques, such as heat-pump drying of foods, which allow both industrial practice and research and development projects to save energy, reduce carbon footprints, and thus improve the bottom line. Four New Chapters: Spray-Freeze-Drying Fry Drying Refractance Window Drying Mechanical Thermal Expression Requiring no prior knowledge of chemical engineering, this single-source reference should assist researchers in turning the laboratory curiosities of today into the revolutionary novel drying technologies of tomorrow.
Download or read book Chemical Reactor Modeling written by Hugo A. Jakobsen and published by Springer Science & Business Media. This book was released on 2014-04-02 with total page 1589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Reactor Modeling closes the gap between Chemical Reaction Engineering and Fluid Mechanics. The second edition consists of two volumes: Volume 1: Fundamentals. Volume 2: Chemical Engineering Applications In volume 1 most of the fundamental theory is presented. A few numerical model simulation application examples are given to elucidate the link between theory and applications. In volume 2 the chemical reactor equipment to be modeled are described. Several engineering models are introduced and discussed. A survey of the frequently used numerical methods, algorithms and schemes is provided. A few practical engineering applications of the modeling tools are presented and discussed. The working principles of several experimental techniques employed in order to get data for model validation are outlined. The monograph is based on lectures regularly taught in the fourth and fifth years graduate courses in transport phenomena and chemical reactor modeling and in a post graduate course in modern reactor modeling at the Norwegian University of Science and Technology, Department of Chemical Engineering, Trondheim, Norway. The objective of the book is to present the fundamentals of the single-fluid and multi-fluid models for the analysis of single and multiphase reactive flows in chemical reactors with a chemical reactor engineering rather than mathematical bias. Organized into 13 chapters, it combines theoretical aspects and practical applications and covers some of the recent research in several areas of chemical reactor engineering. This book contains a survey of the modern literature in the field of chemical reactor modeling.
Download or read book Chemical Process Design and Simulation Aspen Plus and Aspen Hysys Applications written by Juma Haydary and published by John Wiley & Sons. This book was released on 2019-01-16 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and example oriented text for the study of chemical process design and simulation Chemical Process Design and Simulation is an accessible guide that offers information on the most important principles of chemical engineering design and includes illustrative examples of their application that uses simulation software. A comprehensive and practical resource, the text uses both Aspen Plus and Aspen Hysys simulation software. The author describes the basic methodologies for computer aided design and offers a description of the basic steps of process simulation in Aspen Plus and Aspen Hysys. The text reviews the design and simulation of individual simple unit operations that includes a mathematical model of each unit operation such as reactors, separators, and heat exchangers. The author also explores the design of new plants and simulation of existing plants where conventional chemicals and material mixtures with measurable compositions are used. In addition, to aid in comprehension, solutions to examples of real problems are included. The final section covers plant design and simulation of processes using nonconventional components. This important resource: Includes information on the application of both the Aspen Plus and Aspen Hysys software that enables a comparison of the two software systems Combines the basic theoretical principles of chemical process and design with real-world examples Covers both processes with conventional organic chemicals and processes with more complex materials such as solids, oil blends, polymers and electrolytes Presents examples that are solved using a new version of Aspen software, ASPEN One 9 Written for students and academics in the field of process design, Chemical Process Design and Simulation is a practical and accessible guide to the chemical process design and simulation using proven software.
Download or read book Chemical Process Design and Integration written by Robin Smith and published by John Wiley & Sons. This book was released on 2016-08-02 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a highly regarded author with industrial and academic experience, this new edition of an established bestselling book provides practical guidance for students, researchers, and those in chemical engineering. The book includes a new section on sustainable energy, with sections on carbon capture and sequestration, as a result of increasing environmental awareness; and a companion website that includes problems, worked solutions, and Excel spreadsheets to enable students to carry out complex calculations.
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
