Download or read book Proceedings of the Triennial World Congress of the International Federation of Automatic Control written by International Federation of Automatic Control and published by . This book was released on 1990 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. - A practical guide to the selection, design and optimization of extrusion processes and equipment - Designed to improve production efficiency and product quality - Focuses on practical fault analysis and troubleshooting techniques
Download or read book Extrusion Coating written by B. H. Gregory and published by Trafford Publishing. This book was released on 2008-05-28 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive study of extrusion coating technology describes the process and applications in detail, combining experimental data with computer modeling and the author's 30 years of experience. This methodology provides insight, clarity and assistance in problem solving, process optimization and new product development. The oportunities to exploit a wide range of polymers by the extrusion coater are discussed in detail. These include LDPE, HDPE, PP, ionomers, copolymers and blends and speciality materials, such as EVOH and PET. Everything you wanted to know about: Screw and die design for mono and coextrusion. Chill roll design and winders. Maximizing adhesion at high line speeds:- time in air gap and melt relaxation. Adhesion promotion:- corona, flame, ozone treatment and chemical primers. Feedblock and dual manifold coextrusion compared. Coextrusion:- control layer arrangement and eliminate interfacial instabilities. Optimize melt stability and minimize neck-in in air gap. Material selection:- polyethylenes, copolymers, ionomers, metallocenes, polypropylene etc. Substrates: pulp and paper, aluminium foil, plastic films etc. Applications for extrusion coatings and laminates. Minimize odor and off-taste and the scalping phenomenon in food packaging. Trouble shooting and many more insights. Target Audience: Engineers, marketers, technicians and students involved with the extrusion coating process. Table of Contents: The Extrusion Coating Process Equipment and Screw Design Die Design Stretching Flows and Neck-In Adhesion Coextrusion Adhesion Promotion Methods Polymers for Extrusion Coating: includes, coplymers, ionomers, PP, blends, metallocene PEs Speciality Polymers: EVOH and PET Improving organoleptic properties Substrates and Films for the EXtrusion Coater Extrusion Coated Products and Applications
Download or read book 27th European Symposium on Computer Aided Process Engineering written by and published by Elsevier. This book was released on 2017-09-21 with total page 3064 pages. Available in PDF, EPUB and Kindle. Book excerpt: 27th European Symposium on Computer Aided Process Engineering, Volume 40 contains the papers presented at the 27th European Society of Computer-Aided Process Engineering (ESCAPE) event held in Barcelona, October 1-5, 2017. It is a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students, and consultants for chemical industries. - Presents findings and discussions from the 27th European Society of Computer-Aided Process Engineering (ESCAPE) event
Download or read book Liquid Film Coating written by P.M. Schweizer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multi-authored volume provides a comprehensive and in-depth account of the highly interdisciplinary science and technology of liquid film coating. The book covers fundamental principles from a wide range of scientific disciplines, including fluid mechanics aand transport phenomena, capillary hydrodynamics, surface and colloid science. The authors, all acknowledged eperts in their fields, represent a balance between industrial and academic points of view. Throughout the text, many case studies illustrate how scientific principles together with advanced experimental and theoretical methods are applied to develop and optimize manufacturing processes of eve increasing sophiatication and efficiency. In the first part of the book, the authors systematically recount the underlying physical principles and important material properties. The second part of the book gives a comprehensive overview of the most advanced experimental, mathematical and computational methods available today to investigate coating processes. The third part provides an overview and critical literature review for all major classes of liquid film coating processes of industrial importance.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2002 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Identification and Control of Sheet and Film Processes written by Andrew P. Featherstone and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sheet and film processes include coating, papermaking, metal rolling, and polymer film extrusion. Products produced by these processes include paper, bumper stickers, plastic bags, windshield safety glass, and sheet metal. The total capitalization of industries that rely on these processes is well over $ 500 billion worldwide. These processes are notorious for being difficult to control. The goal of this book is to present the theoretical background and practical techniques for the identification and control of sheet and film processes. It is explained why many existing industrial control systems perform poorly for sheet and film processes. Identification and control algorithms are described and illustrated which provide consistent and reliable product quality. These algorithms include an experimental design technique that ensures that informative data are collected during input-output experimentation, model identification techniques that produce a process model and an estimate of its accuracy, and control techniques that take into account actuator constraints as well as robustness to model uncertainties. The algorithms covered in this book are truly the state of the art. Variations on some of the algorithms have been implemented on industrial sheet and film processes. Other algorithms are in various stages of implementation. All of the algorithms have been applied to realistic simulation models constructed from industrial plant data; many of these studies are included in this book.
Download or read book U S Government Research Reports written by and published by . This book was released on 1964 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tappi Journal written by and published by . This book was released on 1996 with total page 1116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Modelling of Polymer Processing written by E. Andreassen and published by iSmithers Rapra Publishing. This book was released on 1992 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of computers to numerically analyse polymer processing was first reported as for back as the 1950's, and the first commercial software became available around 20 years ago. Much research has been carried out since that time, and this report aims to summarise contemporary trends in both commercial and academic research and development. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.
Download or read book Plastics in Food Patkaging written by Natalie Brown and published by CRC Press. This book was released on 1992-04-15 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abundant, detailed information on how plastics are used in modern food distribution and the qualitative and quantitative linkages between food requirements and plastics' fabrication and performance. Covers technical properties, fabrication methods, economics, design calculations, regulations, use of
Download or read book Handbook of Food Processing Two Volume Set written by Theodoros Varzakas and published by CRC Press. This book was released on 2015-11-04 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by world experts, the Handbook of Food Processing, Two-Volume Set discusses the basic principles and applications of major commercial food processing technologies. The handbook discusses food preservation processes, including blanching, pasteurization, chilling, freezing, aseptic packaging, and non-thermal food processing. It describes com
Download or read book Functional Food Ingredients and Nutraceuticals written by John Shi and published by CRC Press. This book was released on 2015-10-28 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a bestseller, Functional Food Ingredients and Nutraceuticals: Processing Technologies covers new and innovative technologies for the processing of functional foods and nutraceuticals that show potential for academic use and broad industrial applications. The book includes a number of "green" separation and stabilization techno
Download or read book Thesaurus of ASTIA Descriptors written by Defense Documentation Center (U.S.) and published by . This book was released on 1962 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 3D and 4D Printing of Polymer Nanocomposite Materials written by Kishor Kumar Sadasivuni and published by Elsevier. This book was released on 2019-10-11 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D and 4D Printing of Polymer Nanocomposite Materials: Processing, Applications, and Challenges covers advanced 3D and 4D printing processes and the latest developments in novel polymer-based printing materials, thus enabling the reader to understand and benefit from the advantages of this groundbreaking technology. The book presents processes, materials selection, and printability issues, along with sections on the preparation of polymer composite materials for 3D and 4D printing. Across the book, advanced printing techniques are covered and discussed thoroughly, including fused deposition modeling (FDM), selective laser sintering (SLS), selective laser melting (SLM), electron beam melting (EBM), inkjet 3D printing (3DP), stereolithography (SLA), and 3D plotting. Finally, major applications areas are discussed, including electronic, aerospace, construction and biomedical applications, with detailed information on the design, fabrication and processing methods required in each case. - Provides a thorough, clear understanding of polymer preparation techniques and 3D and 4D printing processes, with a view to specific applications - Examines synthesis, formation methodology, the dispersion of fillers, characterization, properties, and performance of polymer nanocomposites - Explores the possibilities of 4D printing, covering the usage of stimuli responsive hydrogels and shape memory polymers
Download or read book Hot Melt Extrusion written by Dennis Douroumis and published by John Wiley & Sons. This book was released on 2012-04-24 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot-melt extrusion (HME) - melting a substance and forcing it through an orifice under controlled conditions to form a new material - is an emerging processing technology in the pharmaceutical industry for the preparation of various dosage forms and drug delivery systems, for example granules and sustained release tablets. Hot-Melt Extrusion: Pharmaceutical Applications covers the main instrumentation, operation principles and theoretical background of HME. It then focuses on HME drug delivery systems, dosage forms and clinical studies (including pharmacokinetics and bioavailability) of HME products. Finally, the book includes some recent and novel HME applications, scale -up considerations and regulatory issues. Topics covered include: principles and die design of single screw extrusion twin screw extrusion techniques and practices in the laboratory and on production scale HME developments for the pharmaceutical industry solubility parameters for prediction of drug/polymer miscibility in HME formulations the influence of plasticizers in HME applications of polymethacrylate polymers in HME HME of ethylcellulose, hypromellose, and polyethylene oxide bioadhesion properties of polymeric films produced by HME taste masking using HME clinical studies, bioavailability and pharmacokinetics of HME products injection moulding and HME processing for pharmaceutical materials laminar dispersive & distributive mixing with dissolution and applications to HME technological considerations related to scale-up of HME processes devices and implant systems by HME an FDA perspective on HME product and process understanding improved process understanding and control of an HME process with near-infrared spectroscopy Hot-Melt Extrusion: Pharmaceutical Applications is an essential multidisciplinary guide to the emerging pharmaceutical uses of this processing technology for researchers in academia and industry working in drug formulation and delivery, pharmaceutical engineering and processing, and polymers and materials science. This is the first book from our brand new series Advances in Pharmaceutical Technology. Find out more about the series here.
Download or read book Whittington s Dictionary of Plastics Third Edition written by James F. Carley and published by CRC Press. This book was released on 1993-10-08 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
