Download or read book Modeling and Analytical Methods in Tribology written by Ilya I. Kudish and published by . This book was released on 2010 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling and Analytical Methods in Tribology written by Ilya I. Kudish and published by CRC Press. This book was released on 2010-07-20 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improving our understanding of friction, lubrication, and fatigue, Modeling and Analytical Methods in Tribology presents a fresh approach to tribology that links advances in applied mathematics with fundamental problems in tribology related to contact elasticity, fracture mechanics, and fluid film lubrication. The authors incorporate the classical tenets of tribology while providing new mathematical solutions that address various shortcomings in existing theories. From contact interactions to contact fatigue life, the book connects traditionally separate areas of tribology research to create a coherent modeling methodology that encompasses asymptotic and numerical techniques. The authors often demonstrate the efficacy of the models by comparing predictions to experimental data. In most cases, they derive equations from first principles. They also rigorously prove problem formulations and derive certain solution properties. Solutions to problems are presented using simple analytical formulas, graphs, and tables. In addition, the end-of-chapter exercises highlight points important for comprehending the material and mastering the appropriate skills. Unlocking the secrets that govern the physics of lubricated and dry contacts, this book helps tribologists on their quest to reduce friction, minimize wear, and extend the operating life of mechanical equipment. It provides a real-world industrial perspective so that readers can attain a practical understanding of the material.
Download or read book Advanced Analytical Methods in Tribology written by Martin Dienwiebel and published by Springer. This book was released on 2018-10-04 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basics and methods of nanoscale analytical techniques for tribology field. It gives guidance to the application of mechanical, microstructural, chemical characterization methods and topography analysis of materials. It provides an overview of the of state-of-the-art for researchers and practitioners in the field of tribology. It shows different examples to the application of mechanical, microstructural, chemical characterization methods and topography analysis of materials. Friction and Wear phenomena are governed by complexe processes at the interface of sliding surfaces. For a detailed understanding of these phenomena many surface sensitive techniques have become available in recent years. The applied methods are atom probe tomography, in situ TEM, SERS, NEXAFS, in situ XPS, nanoindentation and in situ Raman spectroscopy. A survey of new related numerical calculations completes this book. This concerns ab-initio coupling, numerical calculations for mechanical aspects and density functional theory (DFT) to study chemical reactivity.
Download or read book Discrete Contact Mechanics with Applications in Tribology written by Irina Goryacheva and published by Elsevier. This book was released on 2022-05-03 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discrete Contact Mechanics with Applications in Tribology presents new solutions to contact problems for elastic and viscoelastic bodies in normal, sliding, and rolling contact, taking into account effects such as surface microgeometry, adhesion, fluid films, and viscous hysteresis in bulk material or surface layers. These solutions are applied to problems in tribology for modeling contact and friction of bodies with surface microgeometry (rough or textured). The book provides exact mathematical formulations for cases of discrete contact based on classical approaches of contact mechanics, allowing readers to study the influence of different parameters of surface microgeometry on contact characteristics and friction force.The book will help solve problems in modeling contact and friction interaction in cases of discrete character of contact interaction, mutual influence of individual contact spots in contact interaction of elastic and viscoelastic solids, calculating sliding and rolling friction forces as a result of adhesive and viscoelastic mechanisms of dissipation, and more. Provides a raft of solutions to contact problems for elastic and viscoelastic materials in normal, sliding, and rolling contact Provides solutions and formulations that consider surface microgeometry, adhesion, fluid films, viscous hysteresis in bulk material or surface layers, and other common material effects Features applied methods based on classical contact mechanics approaches, allowing for analytic and half-analytic treatment of problems
Download or read book Tribology written by Chang-Hung Kuo and published by BoD – Books on Demand. This book was released on 2011-10-12 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past decades, significant advances in tribology have been made as engineers strive to develop more reliable and high performance products. The advancements are mainly driven by the evolution of computational techniques and experimental characterization that leads to a thorough understanding of tribological process on both macro- and microscales. The purpose of this book is to present recent progress of researchers on the hydrodynamic lubrication analysis and the lubrication tests for biodegradable lubricants.
Download or read book Model Based Tracking Control of Nonlinear Systems written by Elzbieta Jarzebowska and published by CRC Press. This book was released on 2012-07-17 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model-Based Control of Nonlinear Systems presents model-based control techniques for nonlinear, constrained systems. It covers constructive control design methods with an emphasis on modeling constrained systems, generating dynamic control models, and designing tracking control algorithms for the models. The book’s interdisciplinary approach illustrates how system modeling and control theory are essential to control design projects. Organized according to the steps in a control design project, the text first discusses kinematic and dynamic modeling methods, including programmed constraints, Lagrange’s equations, Boltzmann−Hamel equations, and generalized programmed motion equations. The next chapter describes basic control concepts and the use of nonlinear control theory. After exploring stabilization strategies for nonlinear systems, the author presents existing model-based tracking control algorithms and path-following strategies for nonlinear systems. The final chapter develops a new model reference tracking strategy for programmed motion. Throughout the text, two examples of mechanical systems are used to illustrate the theory and simulation results. The first example is a unicycle model (nonholonomic system) and the second is a two-link planar manipulator model (holonomic system). With a focus on constructive modeling and control methods, this book provides the tools and techniques to support the control design process.
Download or read book Applied Fracture Mechanics written by Alexander Belov and published by BoD – Books on Demand. This book was released on 2012-12-12 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book "Applied Fracture Mechanics" presents a collection of articles on application of fracture mechanics methods to materials science, medicine, and engineering. In thirteen chapters, a wide range of topics is discussed, including strength of biological tissues, safety of nuclear reactor components, fatigue effects in pipelines, environmental effects on fracture among others. In addition, the book presents mathematical and computational methods underlying the fracture mechanics applications, and also developments in statistical modeling of fatigue. The work presented in this book will be useful, effective, and beneficial to mechanical engineers, civil engineers, and material scientists from industry, research, and education.
Download or read book Proceedings of Malaysian International Tribology Conference 2015 written by Mariyam Jameelah Binti Ghazali and published by Malaysian Tribology Society. This book was released on 2015-11-16 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This ebook is a compilation of papers presented at the Malaysian International Tribology Conference 2015 (MITC2015) - Penang, Malaysia on 16 ~ 17 November 2015.
Download or read book Surface Diagnostics in Tribology written by Kazuhisa Miyoshi and published by World Scientific. This book was released on 1993 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides final year undergraduate students, graduate students, research scientists and engineers with an up-to-date overview of the power of using surface analytical techniques for probing complex solid surfaces and lubricants as well as for understanding their interactions in tribological systems. The first three introductory chapters illustrate the need for surface analysis in tribology and the essentials of the analytical techniques. Following these, eight chapters on applications give insight into the contribution of the major analytical techniques to tribology. These chapters are divided into three groups. The first group deals with the applications of surface analytical techniques to the study of the adhesion, friction, deformation, wear, structure and chemistry of solid surfaces at the atomic scale or in well-defined conditions. The second group focuses mainly on solid lubricants and tribological surface modifications. Lastly, the third group covers liquid lubricants in molecularly thin-film lubrication and in boundary lubrication and their interactions with surfaces.
Download or read book Synergetics and Fractals in Tribology written by Ahad Kh Janahmadov and published by Springer. This book was released on 2016-01-29 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the theoretical and practical aspects of tribological process using synergy, fractal and multifractal methods, and the fractal and multifractal models of self-similar tribosystems developed on their basis. It provides a comprehensive analysis of their effectiveness, and also considers the method of flicker noise spectroscopy with detailed parameterization of surface roughness friction. All models, problems and solutions are taken and tested on the set of real-life examples of oil-gas industry. The book is intended for researchers, graduate students and engineers specialising in the field of tribology, and also for senior students of technical colleges.
Download or read book Contact mechanics perspective of tribology written by Irina Goryacheva and published by Frontiers Media SA. This book was released on 2021-06-04 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Friction Wear Lubrication written by Kenneth C Ludema and published by CRC Press. This book was released on 2018-09-14 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a bestseller, this book introduces tribology in a way that builds students’ knowledge and understanding. It includes expanded information on topics such as surface characterization as well as recent advances in the field. The book provides additional descriptions of common testing methods, including diagrams and surface texturing for enhanced lubrication, and more information on rolling element bearings. It also explores surface profile characterization and elastic plastic contact mechanics including wavy surface contact, rough surface contact models, friction and wear plowing models, and thermodynamic analysis of friction.
Download or read book Vehicle Tribology written by M. Godet and published by Elsevier. This book was released on 1991-07-03 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle Tribology was chosen as the topic for the 17th Leeds-Lyon Symposium, as it was decided to be a timely opportunity to bring together experts of many disciplines connected with problems of emissions, particulates and energy efficiency associated with the automobile engine. The volume contains 55 papers divided into eighteen sessions.
Download or read book Modeling and Simulation of Tribological Problems in Technology written by Marco Paggi and published by Springer. This book was released on 2019-06-26 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book conveys, in a self-contained manner, the fundamental concepts for classifying types of contact, the essential mathematical methods for the formulation of contact problems, and the numerical methods required for their solution. In addition to the methodologies, it covers a broad range of applications, including contact problems in mechanical engineering, microelectronics and nanomechanics. All chapters provide both substantial background on the theory and numerical methods, and in-depth treatments of cutting-edge research topics and applications. The book is primarily intended for doctoral students of applied mathematics, mechanics, engineering and physics with a strong interest in the theoretical modelling, numerical simulation and experimental characterization of contact problems in technology. It will also benefit researchers in the above mentioned and neighbouring fields working in academia or at private research and development centres who are interested in a concise yet comprehensive overview of contact mechanics, from its fundamental mathematical background, to the computational methods and the experimental techniques currently available for the solution of contact problems.
Download or read book Principles of Tribology written by Shizhu Wen and published by John Wiley & Sons. This book was released on 2012-02-21 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Professors Wen and Huang present current developments in tribology research along with tribology fundamentals and applications, including lubrication theory, lubrication design, friction mechanism, wear mechanism, friction control, and their applications. In addition to classical tribology, Wen and Huang cover the research areas of the modern tribology, as well as the regularities and characteristics of tribological phenomena in practice. Furthermore, the authors present the basic theory, numerical analysis methods, and experimental measuring techniques of tribology as well as their applications in engineering. Provides a systematic presentation of tribology fundamentals and their applications Discusses the current states and development trends in tribology research Applies the applications to modern day engineering Computer programs available for download from the book’s companion site Principles of Tribology is aimed at postgraduates and senior-level undergraduates studying tribology, and can be used for courses covering theory and applications. Tribology professionals and students specializing in allied areas of mechanical engineering and materials science will also find the book to be a helpful reference or introduction to the topic. Companion website for the book: www.wiley.com/go/wen/tribology
Download or read book Extreme Tribology written by Ahmed Abdelbary and published by CRC Press. This book was released on 2020-01-06 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is an unfamiliar term for many, but is experienced by all. It is the science of friction, wear and lubrication of contacting surfaces in relative motion. The aim of this book is to introduce the fundamentals of tribology as well as its challenges in extreme operating conditions. The book comprises a historical background and an introduction to familiarize both undergraduate and postgraduate readers with such an important topic. It addresses a comprehensive coverage of classical tribology of solid contacts, friction mechanics, wear mechanisms and lubrication technologies. The tribology of polymer composites, MEMS and NEMS are explored. In addition, tribology of automotive components is presented, as are tribological applications in many practical situations.Various test methods used in evaluating wear are reviewed. Diverse techniques applied in predicting wear behavior by mathematical models, FE modeling and ANN approach are discussed. The book reviews key features of extraordinary conditions associated with, but not limited to, harsh environments, severe sliding and poor lubrication challenges. A basic understanding of failure modes in tribological systems is covered. The state-of-the-art research on tribology under these extreme conditions is extensively discussed, which will be of interest to researchers. The book highlights solutions for extreme tribology problems and provides an overview of various factors affecting tribosystems in harsh conditions.
Download or read book Tribology and Dynamics of Engine and Powertrain written by Homer Rahnejat and published by Elsevier. This book was released on 2010-09-30 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology, the science of friction, wear and lubrication, is one of the cornerstones of engineering’s quest for efficiency and conservation of resources. Tribology and dynamics of engine and powertrain: fundamentals, applications and future trends provides an authoritative and comprehensive overview of the disciplines of dynamics and tribology using a multi-physics and multi-scale approach to improve automotive engine and powertrain technology. Part one reviews the fundamental aspects of the physics of motion, particularly the multi-body approach to multi-physics, multi-scale problem solving in tribology. Fundamental issues in tribology are then described in detail,from surface phenomena in thin-film tribology, to impact dynamics, fluid film and elastohydrodynamic lubrication means of measurement and evaluation. These chapters provide an understanding of the theoretical foundation for Part II which includes many aspects of the physics of motion at a multitude of interaction scales from large displacement dynamics to noise and vibration tribology, all of which affect engines and powertrains. Many chapters are contributed by well-established practitioners disseminating their valuable knowledge and expertise on specific engine and powertrain sub-systems. These include overviews of engine and powertrain issues, engine bearings, piston systems, valve trains, transmission and many aspects of drivetrain systems. The final part of the book considers the emerging areas of microengines and gears as well as nano-scale surface engineering. With its distinguished editor and international team of academic and industry contributors, Tribology and dynamics of engine and powertrain is a standard work for automotive engineers and all those researching NVH and tribological issues in engineering. Reviews fundamental aspects of physics in motion, specifically the multi-body approach to multi physics Describes essential issues in tribology from surface phenomena in thin film tribology to impact dynamics Examines specific engine and powertrain sub-systems including engine bearings, piston systems and value trains
