Download or read book Modeling and Analysis of Modern Fluid Problems written by Liancun Zheng and published by Academic Press. This book was released on 2017-04-26 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Analysis of Modern Fluids helps researchers solve physical problems observed in fluid dynamics and related fields, such as heat and mass transfer, boundary layer phenomena, and numerical heat transfer. These problems are characterized by nonlinearity and large system dimensionality, and ‘exact’ solutions are impossible to provide using the conventional mixture of theoretical and analytical analysis with purely numerical methods. To solve these complex problems, this work provides a toolkit of established and novel methods drawn from the literature across nonlinear approximation theory. It covers Padé approximation theory, embedded-parameters perturbation, Adomian decomposition, homotopy analysis, modified differential transformation, fractal theory, fractional calculus, fractional differential equations, as well as classical numerical techniques for solving nonlinear partial differential equations. In addition, 3D modeling and analysis are also covered in-depth. Systematically describes powerful approximation methods to solve nonlinear equations in fluid problems Includes novel developments in fractional order differential equations with fractal theory applied to fluids Features new methods, including Homotypy Approximation, embedded-parameter perturbation, and 3D models and analysis

Download or read book The Craft of Fractional Modelling in Science and Engineering written by Jordan Hristov and published by MDPI. This book was released on 2018-06-22 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "The Craft of Fractional Modelling in Science and Engineering" that was published in Fractal Fract

Download or read book Fluid structure Interactions written by Thomas Richter and published by Springer. This book was released on 2017-08-26 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book starts by introducing the fundamental concepts of mathematical continuum mechanics for fluids and solids and their coupling. Special attention is given to the derivation of variational formulations for the subproblems describing fluid- and solid-mechanics as well as the coupled fluid-structure interaction problem. Two monolithic formulations for fluid-structure interactions are described in detail: the well-established ALE formulation and the modern Fully Eulerian formulation, which can effectively deal with problems featuring large deformation and contact. Further, the book provides details on state-of-the-art discretization schemes for fluid- and solid-mechanics and considers the special needs of coupled problems with interface-tracking and interface-capturing techniques. Lastly, advanced topics like goal-oriented error estimation, multigrid solution and gradient-based optimization schemes are discussed in the context of fluid-structure interaction problems.

Download or read book Lecture Notes in Computational Intelligence and Decision Making written by Sergii Babichev and published by Springer Nature. This book was released on 2021-07-22 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to current problems of artificial and computational intelligence including decision-making systems. Collecting, analysis, and processing information are the current directions of modern computer science. Development of new modern information and computer technologies for data analysis and processing in various fields of data mining and machine learning creates the conditions for increasing effectiveness of the information processing by both the decrease of time and the increase of accuracy of the data processing. The book contains of 54 science papers which include the results of research concerning the current directions in the fields of data mining, machine learning, and decision making. The papers are divided in terms of their topic into three sections. The first section "Analysis and Modeling of Complex Systems and Processes" contains of 26 papers, and the second section "Theoretical and Applied Aspects of Decision-Making Systems" contains of 13 papers. There are 15 papers in the third section "Computational Intelligence and Inductive Modeling". The book is focused to scientists and developers in the fields of data mining, machine learning and decision-making systems.

Download or read book Advances in Differential and Difference Equations with Applications 2020 written by Dumitru Baleanu and published by MDPI. This book was released on 2021-01-20 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is very well known that differential equations are related with the rise of physical science in the last several decades and they are used successfully for models of real-world problems in a variety of fields from several disciplines. Additionally, difference equations represent the discrete analogues of differential equations. These types of equations started to be used intensively during the last several years for their multiple applications, particularly in complex chaotic behavior. A certain class of differential and related difference equations is represented by their respective fractional forms, which have been utilized to better describe non-local phenomena appearing in all branches of science and engineering. The purpose of this book is to present some common results given by mathematicians together with physicists, engineers, as well as other scientists, for whom differential and difference equations are valuable research tools. The reported results can be used by researchers and academics working in both pure and applied differential equations.

Download or read book Integral Transforms and Operational Calculus written by H. M. Srivastava and published by MDPI. This book was released on 2019-11-20 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Researches and investigations involving the theory and applications of integral transforms and operational calculus are remarkably wide-spread in many diverse areas of the mathematical, physical, chemical, engineering and statistical sciences. This Special Issue contains a total of 36 carefully-selected and peer-reviewed articles which are authored by established researchers from many countries. Included in this Special Issue are review, expository and original research articles dealing with the recent advances on the topics of integral transforms and operational calculus as well as their multidisciplinary applications

Download or read book Computational Intelligence for Water and Environmental Sciences written by Omid Bozorg-Haddad and published by Springer Nature. This book was released on 2022-07-08 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive yet fresh perspective for the cutting-edge CI-oriented approaches in water resources planning and management. The book takes a deep dive into topics like meta-heuristic evolutionary optimization algorithms (e.g., GA, PSA, etc.), data mining techniques (e.g., SVM, ANN, etc.), probabilistic and Bayesian-oriented frameworks, fuzzy logic, AI, deep learning, and expert systems. These approaches provide a practical approach to understand and resolve complicated and intertwined real-world problems that often imposed serious challenges to traditional deterministic precise frameworks. The topic caters to postgraduate students and senior researchers who are interested in computational intelligence approach to issues stemming from water and environmental sciences.

Download or read book Nanofluids written by Mohammad Hatami and published by Elsevier. This book was released on 2024-06-22 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofluids: Advanced Applications and Numerical Simulations combines the mathematical and numerical studies of nanofluids and their application to a range of applications. The book begins by introducing the principles of nanofluids, structures, types, properties, methods and stability. This is followed by a detailed chapter that explains a full range of numerical techniques for the modeling of nanofluids. Subsequent chapters offer in-depth coverage of target areas, including cooling and heating applications, micro-electric and magnetic devices, chemistry and oil recovery, biomedicine, renewable energy, and automotive engineering. Throughout the book, methods for numerical modelling are described in detail, with supporting equations, techniques, and applied examples. This is a valuable resource for advanced students, scientists, engineers, and R&D professionals working with nanofluids, simulation, and numerical methods for advanced applications, as well as researchers across nanotechnology, biomedicine, electronics, energy, chemistry, materials science and mechanical engineering. Presents numerical methods for modelling of nanofluids in details Examines stability, magnetic field, electric field, and other effects on behavior and optical properties Explores cutting-edge applications of nanofluids by numerical methods

Download or read book Modeling and Simulation of Fluid Flow and Heat Transfer written by Reshu Gupta and published by CRC Press. This book was released on 2024-03-14 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the rapidly advancing modern world, scientific and technological understanding and innovation are reaching new heights. Computational fluid dynamics and heat transfer have emerged as powerful tools, playing a pivotal role in the analysis and design of complex engineering problems and processes. With the ability to mathematically model various engineering phenomena, these computational tools offer a deeper understanding of intricate dynamics before the physical prototype is created. Widely employed as simulation tools, computational fluid dynamics and heat transfer codes enable the virtual or digital prototype development of products and devices involving complex transport and multiphasic phenomena. They have become an indispensable element of the agile product development environment across diverse sectors of manufacturing, facilitating accelerated product development cycles. Key features of this book: Covers the analysis of advanced thermal engineering systems Explores the simulation of various fluids with slip effect Applies entropy and optimization techniques to thermal engineering systems Discusses heat and mass transfer phenomena Explores fluid flow and heat transfer in porous media Captures recent developments in analytical and computational methods used to investigate the complex mathematical models of fluid dynamics Covers the application of mathematical and computational modeling techniques to fluid flow problems in various geometries Modeling and Simulation of Fluid Flow and Heat Transfer delves into the fascinating world of fluid dynamics and heat transfer modeling, presenting an extensive exploration of these subjects. This book is a valuable resource for researchers, engineers, and students seeking to comprehend and apply numerical methods and computational tools in fluid dynamics and heat transfer problems.

Download or read book Predicting the T2K Neutrino Flux and Measuring Oscillation Parameters written by Tomislav Vladisavljevic and published by Springer Nature. This book was released on 2020-09-14 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis reports the calculation of neutrino production for the T2K experiment; the most precise a priori estimate of neutrino production that has been achieved for any accelerator-based neutrino oscillation experiment to date. The production of intense neutrino beams at accelerator facilities requires exceptional understanding of chains of particle interactions initiated within extended targets. In this thesis, the calculation of neutrino production for T2K has been improved by using measurements of particle production from a T2K replica target, taken by the NA61/SHINE experiment. This enabled the reduction of the neutrino production uncertainty to the level of 5%, which will have a significant impact on neutrino oscillation and interaction measurements by T2K in the coming years. In addition to presenting the revised flux calculation methodology in an accessible format, this thesis also reports a joint T2K measurement of muon neutrino and antineutrino disappearance, and the accompanying electron neutrino and antineutrino appearance, with the updated beam constraint.

Download or read book Biofluids Modeling written by Wilson Chin and published by John Wiley & Sons. This book was released on 2023-11-10 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: BIOFLUIDS MODELING The first book offering analytical and modern computational solutions to important biofluids problems, such as non-Newtonian flows in blood vessels, clogged arteries and veins, bifurcated arteries and veins, arbitrary stent geometries, tissue properties prediction, and porous media Darcy flow simulation in large-scale organ analysis, this is a must-have for any library. This book introduces new methods for biofluids modeling and biological engineering. The foregoing subjects are treated rigorously, with all modeling assumptions stated and solutions clearly derived. But that’s not all. Key supporting physics-based ideas, algorithmic details, and software design interfaces are equally emphasized, in order to support our overriding objective of getting the anatomical and clinical information that physicians need. Importantly, this volume provides a self-contained exposition that includes all required biological concepts, plus the background preparation needed in fluid mechanics, basic differential equations, and modern numerical analysis. The presentation style will appeal to medical practitioners, researchers, biomedical engineers, and students interested in quantitative fluid flow modeling, as well as engineering students eager to learn about advances in a rapidly growing and changing biological science. As such, the book represents “must-reading” suitable at the advanced undergraduate level, and motivated readers should be able to embark on related research following guided study.

Download or read book Fluid Mechanics and Heat Transfer written by Kaveh Hariri Asli and published by Apple Academic Press. This book was released on 2021-03-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This valuable new book focuses on new methods and techniques in fluid mechanics and heat transfer in mechanical engineering. The book includes the research of the authors on the development of optimal mathematical models and also uses modern computer technology and mathematical methods for the analysis of nonlinear dynamic processes. It covers technologies applicable to both fluid mechanics and heat transfer problems, which include a combination of physical, mechanical, and thermal techniques. The authors develop a new method for the calculation of mathematical models by computer technology, using parametric modeling techniques and multiple analyses for mechanical system.

Download or read book Fundamental Trends in Fluid structure Interaction written by Giovanni Paolo Galdi and published by World Scientific. This book was released on 2010 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interaction of a fluid with a solid body is a widespread phenomenon in nature, occurring at different scales and different applied disciplines. Interestingly enough, even though the mathematical theory of the motion of bodies in a liquid is one of the oldest and most classical problems in fluid mechanics, mathematicians have, only very recently, become interested in a systematic study of the basic problems related to fluid-structure interaction, from both analytical and numerical viewpoints. Fundamental Trends in Fluid-Structure Interaction is a unique collection of important papers written by world-renowned experts aimed at furnishing the highest level of development in several significant areas of fluid-structure interactions. The contributions cover several aspects of this discipline, from mathematical analysis, numerical simulation and modeling viewpoints, including motion of rigid and elastic bodies in a viscous liquid, particulate flow and hemodynamic.

Download or read book Modern Fluid Dynamics written by Clement Kleinstreuer and published by CRC Press. This book was released on 2018-04-25 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Fluid Dynamics, Second Edition provides up-to-date coverage of intermediate and advanced fluids topics. The text emphasizes fundamentals and applications, supported by worked examples and case studies. Scale analysis, non-Newtonian fluid flow, surface coating, convection heat transfer, lubrication, fluid-particle dynamics, microfluidics, entropy generation, and fluid-structure interactions are among the topics covered. Part A presents fluids principles, and prepares readers for the applications of fluid dynamics covered in Part B, which includes computer simulations and project writing. A review of the engineering math needed for fluid dynamics is included in an appendix.

Download or read book Modern Problems in Applied Analysis written by Piotr Drygaś and published by Birkhäuser. This book was released on 2018-03-21 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features a collection of recent findings in Applied Real and Complex Analysis that were presented at the 3rd International Conference “Boundary Value Problems, Functional Equations and Applications” (BAF-3), held in Rzeszow, Poland on 20-23 April 2016. The contributions presented here develop a technique related to the scope of the workshop and touching on the fields of differential and functional equations, complex and real analysis, with a special emphasis on topics related to boundary value problems. Further, the papers discuss various applications of the technique, mainly in solid mechanics (crack propagation, conductivity of composite materials), biomechanics (viscoelastic behavior of the periodontal ligament, modeling of swarms) and fluid dynamics (Stokes and Brinkman type flows, Hele-Shaw type flows). The book is addressed to all readers who are interested in the development and application of innovative research results that can help solve theoretical and real-world problems.

Download or read book Modern Fluid Dynamics written by Clement Kleinstreuer and published by CRC Press. This book was released on 2018-04-25 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Fluid Dynamics, Second Edition provides up-to-date coverage of intermediate and advanced fluids topics. The text emphasizes fundamentals and applications, supported by worked examples and case studies. Scale analysis, non-Newtonian fluid flow, surface coating, convection heat transfer, lubrication, fluid-particle dynamics, microfluidics, entropy generation, and fluid-structure interactions are among the topics covered. Part A presents fluids principles, and prepares readers for the applications of fluid dynamics covered in Part B, which includes computer simulations and project writing. A review of the engineering math needed for fluid dynamics is included in an appendix.

Download or read book Homotopy Analysis Method in Nonlinear Differential Equations written by Shijun Liao and published by Springer Science & Business Media. This book was released on 2012-06-22 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Homotopy Analysis Method in Nonlinear Differential Equations" presents the latest developments and applications of the analytic approximation method for highly nonlinear problems, namely the homotopy analysis method (HAM). Unlike perturbation methods, the HAM has nothing to do with small/large physical parameters. In addition, it provides great freedom to choose the equation-type of linear sub-problems and the base functions of a solution. Above all, it provides a convenient way to guarantee the convergence of a solution. This book consists of three parts. Part I provides its basic ideas and theoretical development. Part II presents the HAM-based Mathematica package BVPh 1.0 for nonlinear boundary-value problems and its applications. Part III shows the validity of the HAM for nonlinear PDEs, such as the American put option and resonance criterion of nonlinear travelling waves. New solutions to a number of nonlinear problems are presented, illustrating the originality of the HAM. Mathematica codes are freely available online to make it easy for readers to understand and use the HAM. This book is suitable for researchers and postgraduates in applied mathematics, physics, nonlinear mechanics, finance and engineering. Dr. Shijun Liao, a distinguished professor of Shanghai Jiao Tong University, is a pioneer of the HAM.