Download or read book Modeling and Analysis of Elastohydrodynamic Lubrication of Line Contacts Considering Thermal and Non Newtonian Effects written by Hsing-Sen Hsiao and published by . This book was released on 1992 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elasto Hydrodynamic Lubrication written by D. Dowson and published by Elsevier. This book was released on 2014-07-18 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elasto-Hydrodynamic Lubrication deals with the mechanism of elasto-hydrodynamic lubrication, that is, the lubrication regime in operation over the small areas where machine components are in nominal point or line contact. The lubrication of rigid contacts is discussed, along with the effects of high pressure on the lubricant and bounding solids. The governing equations for the solution of elasto-hydrodynamic problems are presented. Comprised of 13 chapters, this volume begins with an overview of elasto-hydrodynamic lubrication and representation of contacts by cylinders, followed by a discussion on equations relevant to lubrication, including the Reynolds equation. The reader is then introduced to lubrication of rigid cylinders; the importance of film thickness in highly loaded rigid contacts; the elasticity of solids in contact; and the theory of elasto-hydrodynamic lubrication. Subsequent chapters focus on apparatus and measurements of film thickness and film shape; friction and viscosity; and lubrication of gears and roller bearings. This book will be of interest to tribologists.
Download or read book Elastohydrodynamic Lubrication for Line and Point Contacts written by Ilya I. Kudish and published by CRC Press. This book was released on 2013-06-17 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elastohydrodynamic Lubrication for Line and Point Contacts: Asymptotic and Numerical Approaches describes a coherent asymptotic approach to the analysis of lubrication problems for heavily loaded line and point contacts. This approach leads to unified asymptotic equations for line and point contacts as well as stable numerical algorithms for the so
Download or read book Thermal Non Newtonian Elastohydrodynamic Lubrication of Line Contacts Under Sliding rolling and Simple Sliding Conditions written by Shao Wang and published by . This book was released on 1991 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thermal Reynolds-Eyring equation is derived to study the elastohydrodynamic lubrication of line contacts. This lubrication condition is usually found in spur gears, roller bearings and cams. The inlet region with back-flow is treated with a control volume scheme to obtain the temperature solution. A computationally-simple formulation for the stationary surface temperature is developed for simple sliding conditions. The most influential dimensionless groups are identified from the complete sets of dimensionless groups. Numerical results obtained for sliding and rolling and for simple sliding conditions are used to develop formulas for the thermal and non-Newtonian (Ree-Eyring) film thickness reduction factor. Even when thermal effects are small, these formulas can still give a film thickness reduction due to the non-Newtonian effects. Results for the maximum temperatures and traction coefficient are also presented. The pressure dependence of lubricant thermal conductivity is found to significantly affect the maximum lubricant temperature. The thermal effects on film thickness and traction are found to be more pronounced for simple sliding than for combined sliding and rolling conditions. Under simple sliding, the heat transferred to the stationary surface is found to be very small compared to that transferred to the moving surface and lubricating fluid.
Download or read book Finite Element Modeling of Elastohydrodynamic Lubrication Problems written by Wassim Habchi and published by John Wiley & Sons. This book was released on 2018-03-21 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the latest developments in modeling elastohydrodynamic lubrication (EHL) problems using the finite element method (FEM) This comprehensive guide introduces readers to a powerful technology being used today in the modeling of elastohydrodynamic lubrication (EHL) problems. It provides a general framework based on the finite element method (FEM) for dealing with multi-physical problems of complex nature (such as the EHL problem) and is accompanied by a website hosting a user-friendly FEM software for the treatment of EHL problems, based on the methodology described in the book. Finite Element Modeling of Elastohydrodynamic Lubrication Problems begins with an introduction to both the EHL and FEM fields. It then covers Standard FEM modeling of EHL problems, before going over more advanced techniques that employ model order reduction to allow significant savings in computational overhead. Finally, the book looks at applications that show how the developed modeling framework could be used to accurately predict the performance of EHL contacts in terms of lubricant film thickness, pressure build-up and friction coefficients under different configurations. Finite Element Modeling of Elastohydrodynamic Lubrication Problems offers in-depth chapter coverage of Elastohydrodynamic Lubrication and its FEM Modeling, under Isothermal Newtonian and Generalized-Newtonian conditions with the inclusion of Thermal Effects; Standard FEM Modeling; Advanced FEM Modeling, including Model Order Reduction techniques; and Applications, including Pressure, Film Thickness and Friction Predictions, and Coated EHL. This book: Comprehensively covers the latest technology in modeling EHL problems Focuses on the FEM modeling of EHL problems Incorporates advanced techniques based on model order reduction Covers applications of the method to complex EHL problems Accompanied by a website hosting a user-friendly FEM-based EHL software Finite Element Modeling of Elastohydrodynamic Lubrication Problems is an ideal book for researchers and graduate students in the field of Tribology.
Download or read book Thermal and Non Newtonian Effects in Elastohydrodynamic Lubrication of Rolling sliding Contacts written by Moosa Zand and published by . This book was released on 1990 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rheology and Elastohydrodynamic Lubrication written by B.O. Jacobson and published by Elsevier. This book was released on 1991-07-24 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a thorough overview on recent developments in lubricant rheology, elastohydrodynamic lubrication and the effects of surface roughness and particulate contamination in the lubricant on the overall behaviour of a heavily loaded lubricated contact. One of the aims of the book is to make clear to the reader that a Newtonian model for the lubricant behaviour does not have enough degrees of freedom to be able to describe the friction - traction behaviour of heavily loaded lubricated contacts or the oil film build-up and collapse under surface asperities for rough surfaces. The book contains quite a lot of experimental data of lubricants at high pressures, both solidification pressures, compressibilities and shear strength increase coefficients, which make it possible to estimate the friction and power loss in heavily loaded lubricated contacts for different pressures, temperatures, sliding speeds, and lubricant types. This is the first time that data of this type has been included in a textbook and it is hoped that the questions highlighted will serve to initiate and guide future research in this field.
Download or read book Elastohydrodynamics written by Ramsey Gohar and published by . This book was released on 1988 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book On the Use of Model Order Reduction Techniques for the Elastohydrodynamic Contact Problem written by Maier, Daniel and published by KIT Scientific Publishing. This book was released on 2015-05-12 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this work is to develop a method which solves the nonlinear elastohydrodynamic contact problem in a fast and precise way using model order reduction techniques. The reduction procedure is based on a projection onto a low-dimensional subspace using different hyper-reduction procedures. The method provides fast and highly accurate reduced order models for stationary and transient, Newtonian and Non-Newtonian EHD line and point contact problems.
Download or read book IUTAM Symposium on Elastohydrodynamics and Micro elastohydrodynamics written by R.W. Snidle and published by Springer Science & Business Media. This book was released on 2006-01-09 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the IUTAM Symposium on Elastohydrodynamics and Microelastohydrodynamics held in Cardiff from 1-3 September 2004. It contains 31 articles by leading researchers in the field. The symposium focused on theoretical, experimental and computational issues in elastohydrodynamic lubrication (EHL) both in relation to smooth surfaces and in situations where the film is of the same order or thinner than the surface roughness (micro-EHL). The last IUTAM Symposium in this general area of contact of deformable bodies was in 1974. The emphasis in the Symposium was upon fundamental issues such as: solution methods; lubricant rheological models, thermal effects; both low and high elastic modulus situations; human and replacement joints; fluid traction; dynamic effects, asperity lubrication and the failure of lubrication; surface fatigue and thermal distress under EHL conditions. The book will be useful to those active in basic elastohydrodynamics research who wish to gain an up-to-date understanding of the subject from leading experts in the field.
Download or read book An Elastohydrodynamic Lubrication Model for Helicopter High speed Transmission Components written by Carmen Cioc and published by . This book was released on 2004 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis describes a deterministic approach to analyze elastohydrodynamic lubrication (EHL) of helicopter transmission gear surfaces with asperities. Thermal, Newtonian or non-Newtonian models are used to study the mechanisms of film generation, pressure distribution and temperature distributions within the fluid and on the surface, for an EHL line contact. A two-slope viscosity-pressure model is used to avoid overestimation of the viscosity of the lubricant under heavy loads. The three-dimensional roughness description of an actual gear tooth surface is measured using a non-contact surface profilometer. Detailed analysis of the fluid parameters and the surface roughness influences are presented. Five different types of lubricants are studied in order to determine which one best corresponds to the operating conditions. The pressure distribution, fluid film thickness distribution and the temperature rise at the contact surface are predicted as a function of the gear operating conditions including normal load, lubricant temperature and rolling/sliding speed. A new numerical method, used to solve the Reynolds equation, is employed in order to maximize the computational speed. The numerical developments described for EHL lubrication are extended then to incorporate metal-to-metal contact. A mixed-elastohydrodynamic lubrication model is presented in order to analyze helicopter transmission gears. A parametric analysis is performed in order to determine explicitly the metal-to-metal contact effects on the viscosity, and implicitly on the pressure, fluid film generation, and temperatures for both fluid and surfaces.
Download or read book Rheological Effects on Friction in Elastohydrodynamic Lubrication written by Edward G. Trachman and published by . This book was released on 1973 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: An analytical and experimental investigation is presented of the friction in a rolling and sliding elastohydrodynamic lubricated contact. The rheological behavior of the lubricant is described in terms of two viscoelastic models. These models represent the separate effects of non-Newtonian behavior and the transient response of the fluid. A unified description of the non-Newtonian shear rate dependence of the viscosity is presented as a new hyperbolic liquid model. The transient response of viscosity, following the rapid pressure rise encountered in the contact, is described by a compressional viscoelastic model of the volume response of a liquid to an applied pressure step. The resulting momentum and energy equations are solved by an iterative numerical technique, and a friction coefficient is calculated. The experimental study was performed, with two synthetic paraffinic lubricants, to verify the friction predictions of the analysis. The values of friction coefficient from theory and experiment are in close agreement.
Download or read book Fundamentals of Fluid Film Lubrication written by Bernard J. Hamrock and published by CRC Press. This book was released on 2004-03-15 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specifically focusing on fluid film, hydrodynamic, and elastohydrodynamic lubrication, this edition studies the most important principles of fluid film lubrication for the correct design of bearings, gears, and rolling operations, and for the prevention of friction and wear in engineering designs. It explains various theories, procedures, and equations for improved solutions to machining challenges. Providing more than 1120 display equations and an introductory section in each chapter, Fundamentals of Fluid Film Lubrication, Second Edition facilitates the analysis of any machine element that uses fluid film lubrication and strengthens understanding of critical design concepts.
Download or read book ASME Technical Papers written by and published by . This book was released on 1998 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Calculation of Elastohydrodynamic Lubrication written by Ping Huang and published by John Wiley & Sons. This book was released on 2015-09-21 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book not only offers scientists and engineers a clear inter-disciplinary introduction and orientation to all major EHL problems and their solutions but, most importantly, it also provides numerical programs on specific application in engineering. • A one-stop reference providing equations and their solutions to all major elastohydrodynamic lubrication (EHL) problems, plus numerical programs on specific applications in engineering • offers engineers and scientists a clear inter-disciplinary introduction and a concise program for practical engineering applications to most important EHL problems and their solutions • brings together a number of case studies in one text, each being solved using solution methods which share common features and methods
Download or read book Thermal Elastohydrodynamic Lubrication of Line Contacts written by and published by . This book was released on 1983 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Tribology written by and published by . This book was released on 2008 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
