Download or read book Modeling Analysis and Simulation of Two Connected Intersections Using Discrete and Hybrid Petri Nets written by Omar Seddeq Omar Yaqub and published by . This book was released on 2012 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent decades, Petri nets (PNs) have been used to model traffic networks for different purposes, such as signal phase control, routing, and traffic flow estimation, etc. Because of the complex nature of traffic networks where both discrete and continuous dynamics come into play, the Hybrid Petri net (HPN) model becomes an important tool for the modeling and analysis of traffic networks. In Chapter 1 a brief historical summery about traffic systems control and then related work is mentioned followed by the major contributions in this research. Chapter 2 provides a theoretical background on Petri nets. In Chapter 3, we develop a HPN model for a single signalized intersection first, then we extend this model to study a simple traffic network that consists of two successive intersections. Time delays between different points of network are also considered in order to make the model suitable for analysis and simulation. In addition to HPN models, we also consider discrete Petri nets where their modeling simplicity enables the characterization of the occurrences of all events in the system. This discrete PN is particularly useful to give a higher-level representation of the traffic network and study its event occurrences and correlations. In Chapter 4, we build a discrete PN model to represent a traffic network with two successive intersections. However, we find that the model leads to unbounded places which cannot accurately reflect the dynamics of the traffic in terms of event occurrences. Hence, we introduce the Modified Binary Petri nets (MBPN) to overcome the limitation and resolve the confliction problem when we design our controllers. This MBPN model is a powerful tool and can be useful for the modeling and analysis of many other applications in traffic networks. Chapter 5 gives a summary for each chapter, provides conclusion and discusses future work for both discrete and hybrid Petri nets.

Download or read book Colored Petri Nets for Modeling of Discrete Systems written by Reggie Davidrajuh and published by Springer Nature. This book was released on 2023-12-06 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a practical approach to modeling real-world discrete systems and performing analysis. The theory behind the book is the Colored Petri nets, and the tool used for simulations is general-purpose Petri net simulator (GPenSIM). The theory part is kept to a minimum, and more explanation is given to the GPenSIM functions and how they can be used for modeling, simulation, and performance analysis. Real-world industrial systems possess a large number of resources. Modeling these systems with Petri nets would become a problem as they result in huge Petri net models. This book offers a unique solution to this problem by moving resources away from the Petri net model and treating them as variables in the background. Also, the theory and practice put forward in the book help cost estimation of the systems (e.g., manufacturing subsystems).

Download or read book Discrete Continuous and Hybrid Petri Nets written by René David and published by Springer Science & Business Media. This book was released on 2005-09-08 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petri nets do not designate a single modeling formalism. In fact, newcomers to the field confess sometimes to be a little puzzled by the diversity of formalisms that are recognized under this "umbrella". Disregarding some extensions to the theoretical modeling capabilities, and looking at the level of abstraction of the formalisms, Condition/Event, Elementary, Place/Transition, Predicate/Transition, Colored, Object Oriented... net systems are frequently encountered in the literature. On the other side, provided with appropriate interpretative extensions, Controled Net Systems, Marking Diagrams (the Petri net generalization of State Diagrams), or the many-many variants in which time can be explicitly incorporated -Time(d), Deterministic, (Generalized) Stochastic, Fuzzy...- are defined. This represents another way to define practical formalisms that can be obtained by the "cro- product" of the two mentioned dimensions. Thus Petri nets constitute a modeling paradigm, understandable in a broad sense as "the total pattern of perceiving, conceptualising, acting, validating and valuing associated with a particular image of reality that prevails in a science or a branch of science" (Thomas S. Kuhn).

Download or read book Advances in Petri Net written by Tauseef Aized and published by BoD – Books on Demand. This book was released on 2010-09-27 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is full of events which cause, end or affect other events. The study of these events, from a system point of view, is very important. Such systems are called discrete event dynamic systems and are of a subject of immense interest in a variety of disciplines, which range from telecommunication systems and transport systems to manufacturing systems and beyond. There has always been an intense need to formulate methods for modelling and analysis of discrete event dynamic systems. Petri net is a method which is based on a well-founded mathematical theory and has a wide application. This book is a collection of recent advances in theoretical and practical applications of the Petri net method and can be useful for both academia and industry related practitioners.

Download or read book Analytical and Stochastic Modeling Techniques and Applications written by Khalid Al-Begain and published by Springer Science & Business Media. This book was released on 2010-06 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 17th International Conference on Analytical and Stochastic Modeling Techniques and Applications, ASMTA 2010, held in Cardiff, UK, in June 2010. The 28 revised full papers presented were carefully reviewed and selected from numerous submissions for inclusion in the book. The papers are organized in topical sections on queueing theory, specification languages and tools, telecommunication systems, estimation, prediction, and stochastic modelling.

Download or read book Smart Cities written by Enrique Alba and published by Springer. This book was released on 2017-06-07 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the second International Conference on Smart Cities, Smart-CT 2017, held in Málaga, Spain, in June 2017. The 16 papers presented in this volume were carefully reviewed and selected from 21 submissions. The topics covered include studies and tools to improve road traffic, energy consumption, logistics, frameworks to provide new services and take decisions in a holistic way, driving assistance, electric vehicles, public transport, and surveys on smart city concepts.

Download or read book Discrete Continuous and Hybrid Petri Nets written by René David and published by Springer. This book was released on 2014-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petri Nets were introduced and still successfully used to analyze and model discrete event systems especially in engineering and computer sciences such as in automatic control. Recently this discrete Petri Nets formalism was successfully extended to continuous and hybrid systems. This monograph presents a well written and clearly organized introduction in the standard methods of Petri Nets with the aim to reach an accurate understanding of continuous and hybrid Petri Nets, while preserving the consistency of basic concepts throughout the book. The book is a monograph as well as a didactic tool which is easy to understand due to many simple solved examples and detailed figures. In its second completely reworked edition various sections, concepts and recently developed algorithms are added as well as additional examples/exercises.

Download or read book Petri Nets for Systems Engineering written by Claude Girault and published by Springer Science & Business Media. This book was released on 2003 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using formal methods for the specification and verification of hardware and software systems is becoming increasingly important as systems increase in size and complexity. The aim of the book is to illustrate progress in formal methods based on Petri net formalisms. It presents both practical and theoretical foundations for the use of Petri nets in complex system engineering tasks. In doing so it bridges the gap between Petri nets and the systems modeling and implementation process. It contains a collection of examples arising from different fields, such as flexible manufacturing, telecommunication and workflow management systems.

Download or read book Modelling Analysis and Design of Hybrid Systems written by S. Engell and published by Springer. This book was released on 2003-07-01 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1995, the Deutsche Forschungsgemeinschaft (DFG), the largest public research funding organization in Germany, decided to launch a priority program (Schw- punktprogramm in German) calledKondisk– Dynamics and Control of Systems with Mixed Continuous and Discrete Dynamics. Such a priority program is usually sponsored for six years and supports about twenty scientists at a time, in engineering andcomputersciencemostlyyoungresearchersworkingforadoctoraldegree. There is a yearly competition across all disciplines of arts and sciences for the funding of such programs, and the group of proposers was the happy winner of a slot in that year. The program started in 1996 after an open call for proposals; the successful projects were presented and re-evaluated periodically, and new projects could be submitted simultaneously. During the course of the focused research program, 25 different projects were funded in 19 participating university institutes, some of the projects were collaborative efforts of two groups with different backgrounds, mostly one from engineering and one from computer science. There were two main motivations for establishingKondisk. The rst was the fact that technical systems nowadays are composed of physical components with (mostly) continuous dynamics and computerized control systems where the reaction to discrete events plays a major role, implemented in Programmable Logic Contr- lers (PLCs), Distributed Control Systems (DCSs) or real-time computer systems.

Download or read book Control of Discrete Event Systems written by Carla Seatzu and published by Springer. This book was released on 2012-07-27 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Discrete-event Systems provides a survey of the most important topics in the discrete-event systems theory with particular focus on finite-state automata, Petri nets and max-plus algebra. Coverage ranges from introductory material on the basic notions and definitions of discrete-event systems to more recent results. Special attention is given to results on supervisory control, state estimation and fault diagnosis of both centralized and distributed/decentralized systems developed in the framework of the Distributed Supervisory Control of Large Plants (DISC) project. Later parts of the text are devoted to the study of congested systems though fluidization, an over approximation allowing a much more efficient study of observation and control problems of timed Petri nets. Finally, the max-plus algebraic approach to the analysis and control of choice-free systems is also considered. Control of Discrete-event Systems provides an introduction to discrete-event systems for readers that are not familiar with this class of systems, but also provides an introduction to research problems and open issues of current interest to readers already familiar with them. Most of the material in this book has been presented during a Ph.D. school held in Cagliari, Italy, in June 2011.

Download or read book An Introduction to Hybrid Dynamical Systems written by Arjan J. van der Schaft and published by Springer. This book was released on 2007-10-03 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about dynamical systems that are "hybrid" in the sense that they contain both continuous and discrete state variables. Recently there has been increased research interest in the study of the interaction between discrete and continuous dynamics. The present volume provides a first attempt in book form to bring together concepts and methods dealing with hybrid systems from various areas, and to look at these from a unified perspective. The authors have chosen a mode of exposition that is largely based on illustrative examples rather than on the abstract theorem-proof format because the systematic study of hybrid systems is still in its infancy. The examples are taken from many different application areas, ranging from power converters to communication protocols and from chaos to mathematical finance. Subjects covered include the following: definition of hybrid systems; description formats; existence and uniqueness of solutions; special subclasses (variable-structure systems, complementarity systems); reachability and verification; stability and stabilizability; control design methods. The book will be of interest to scientists from a wide range of disciplines including: computer science, control theory, dynamical system theory, systems modeling and simulation, and operations research.

Download or read book Integrative Computational Systems Biology Approaches in Immunology and Medicine written by Lars Kaderali and published by Frontiers Media SA. This book was released on 2019-04-09 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Petri Nets written by Michel Diaz and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Petri net is a mathematical representation of a network. This book first introduces the basic models including time and stochastic extensions, in particular place-transition and high level Petri nets. Their modeling and design capabilities are illustrated by a set of representations of interest in operating and communication systems. The volume then addresses the related verification problems and proposes corresponding solutions by introducing the main notions needed to fully understand the behavior and properties behind Petri nets. Particular attention is devoted to how systems can be fully represented and analyzed in terms of their behavioral, time, and stochastic aspects by using the same formal approach and semantic basis. Finally, illustrative examples are presented in the important fields of interoperability in telecommunication services, programming languages, multimedia architectures, manufacturing systems, and communication protocols.

Download or read book Lectures on Concurrency and Petri Nets written by Jörg Desel and published by Springer. This book was released on 2004-07-09 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: This tutorial volume originates from the 4th Advanced Course on Petri Nets, ACPN 2003, held in Eichsttt, Germany in September 2003. In addition to lectures given at ACPN 2003, additional chapters have been commissioned to give a well-balanced presentation of the state of the art in the area. This book will be useful as both a reference for those working in the area as well as a study book for the reader who is interested in an up-to-date overview of research and development in concurrent and distributed systems; of course, readers specifically interested in theoretical or applicational aspects of Petri nets will appreciate the book as well.

Download or read book Coloured Petri Nets written by Kurt Jensen and published by Springer. This book was released on 1992 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Quality Reliability Security and Robustness in Heterogeneous Systems written by Victor C. M. Leung and published by Springer Nature. This book was released on with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Embedded Control Systems written by Marian Andrzej Adamski and published by Springer Science & Business Media. This book was released on 2005-06-28 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: A set of original results in the ?eld of high-level design of logical control devices and systems is presented in this book. These concern different aspects of such important and long-term design problems, including the following, which seem to be the main ones. First, the behavior of a device under design must be described properly, and some adequate formal language should be chosen for that. Second, effective algorithmsshouldbeusedforcheckingtheprepareddescriptionforcorrectness, foritssyntacticandsemanticveri?cationattheinitialbehaviorlevel.Third,the problem of logic circuit implementation must be solved using some concrete technological base; ef?cient methods of logic synthesis, test, and veri?cation should be developed for that. Fourth, the task of the communication between the control device and controlled objects (and maybe between different control devices)waitsforitssolution.Alltheseproblemsarehardenoughandcannotbe successfully solved without ef?cient methods and algorithms oriented toward computer implementation. Some of these are described in this book. The languages used for behavior description have been descended usually from two well-known abstract models which became classic: Petri nets and ?nite state machines (FSMs). Anyhow, more detailed versions are developed and described in the book, which enable to give more complete information concerningspeci?cqualitiesoftheregardedsystems.Forexample,themodelof parallelautomatonispresented,whichunliketheconventional?niteautomaton can be placed simultaneously into several places, calledpartial. As a base for circuit implementation of control algorithms, FPGA is accepted in majority of cases.