Download or read book Model Tests for Uplift Resistance of Piles in Sand written by AI. Al-Mhaidib and published by . This book was released on 1998 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: An experimental program using large model piles in sand was conducted to study the shaft resistance behavior of piles subject to uplift loads. Model single pipe piles of different diameters (45 to 178 mm) were subjected to static uplift loading to failure. The piles, which had an embedded length of about 1.7 to 2 m, were installed in a large test pit (3 by 3 by 3 m) by three different methods (driving, jacking, and a reference undisturbed method with negligible lateral displacement) to assess the influence of method of installation on shaft resistance. The tests were performed in two initial densities of a sand (loose and dense). The experimental results were analyzed statistically. The results show that the initial sand density and the method of pile installation are the most significant factors that affect uplift capacity. Installation methods that cause less disturbance give higher uplift capacity. Unit shaft resistance could be reduced as much as by half depending on the method of pile installation relative to the undisturbed method. The displacement at the ultimate uplift load is in the range of 5 to 12.5 mm and independent of soil type and pile diameter, but depends on method of pile installation.
Download or read book Experimental Study of Ultimate Uplift Resistance of Roughened Model Piles in Sand written by Ahmed Shlash and published by . This book was released on 1994 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Uplift Resistance of Pile Shaft in Sand written by Abdullah I. Al-Mhaidib and published by . This book was released on 1992 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Material Point Method for Geotechnical Engineering written by James Fern and published by CRC Press. This book was released on 2019-01-30 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide provides the best introduction to large deformation material point method (MPM) simulations for geotechnical engineering. It provides the basic theory, discusses the different numerical features used in large deformation simulations, and presents a number of applications -- providing references, examples and guidance when using MPM for practical applications. MPM covers problems in static and dynamic situations within a common framework. It also opens new frontiers in geotechnical modelling and numerical analysis. It represents a powerful tool for exploring large deformation behaviours of soils, structures and fluids, and their interactions, such as internal and external erosion, and post-liquefaction analysis; for instance the post-failure liquid-like behaviours of landslides, penetration problems such as CPT and pile installation, and scouring problems related to underwater pipelines. In the recent years, MPM has developed enough for its practical use in industry, apart from the increasing interest in the academic world.
Download or read book Advanced Materials and Techniques for Structural Monitoring Analysis and Control written by Chun-Xu Qu and published by Frontiers Media SA. This book was released on 2024-06-18 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assessing the service status and maintaining the safety of existing structures are critical to the sustainable operations of various engineering and cross-industry, including civil infrastructures, railways and machinery. Static and dynamic structural characteristics play a key role in the global deterioration assessment of the structural performance, which has enabled structural monitoring and analysis technology to become an active focus in the engineering area. Meanwhile, structural control has been widely used in modern structural engineering. Structural control devices are implemented to enhance deteriorating structures and mitigate natural disasters. Through advanced structural control technology, the structural responses can be controlled. These structural control techniques include passive, active or semi-active reverse forces, which aim to modify structural stiffness, mass and damping with minimal control force. Structural control, monitoring and analysis complement each other, ensuring the safety of the structure to the greatest extent.
Download or read book Experimental Study of Ultimate Uplift Resistance of Roughened Model Piles in Sand written by Ahmed Shlash and published by . This book was released on 1994 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deformation and Progressive Failure in Geomechanics written by A. Asaoka and published by Elsevier. This book was released on 1997-10-23 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progressive failure has been a classical problem in the field of geotechnical engineering and has attracted considerable attention in connection with slope stability and foundation problems. It is associated with strain localization or shear banding and is also related to damage in material structures. As knowledge of the progressive failure mechanism increases, it is now necessary to establish effective communications between researchers and engineers. The International Symposium on Deformation and Progressive Failure in Geomechanics provided an opportunity for discussing recent advances in this area. A total of 136 papers were contributed from 22 countries. As well as these, the symposium proceedings also contain 8 interim technical reports on the subject by the members of the Asian Technical Committee of the International Society for Soil Mechanics and Foundation Engineering and the Japanese Geotechnical Society National Committee on Progressive Failure in Geo-structures.
Download or read book Encyclopedia of Ocean Engineering written by Weicheng Cui and published by Springer. This book was released on 2022-05-27 with total page 2177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This encyclopedia adopts a wider definition for the concept of ocean engineering. Specifically, it includes (1) offshore engineering: fixed and floating offshore oil and gas platforms; pipelines and risers; cables and moorings; buoy technology; foundation engineering; ocean mining; marine and offshore renewable energy; aquaculture engineering; and subsea engineering; (2) naval architecture: ship and special marine vehicle design; intact and damaged stability; technology for energy efficiency and green shipping; ship production technology; decommissioning and recycling; (3) polar and Arctic Engineering: ice mechanics; ice-structure interaction; polar operations; polar design; environmental protection; (4) underwater technologies: AUV/ROV design; AUV/ROV hydrodynamics; maneuvering and control; and underwater-specific communicating and sensing systems for AUV/ROVs. It summarizes the A–Z of the background and application knowledge of ocean engineering for use by ocean scientists and ocean engineers as well as nonspecialists such as engineers and scientists from all disciplines, economists, students, and politicians. Ocean engineering theories, ocean devices and equipment, ocean design and operation technologies are described by international experts, many from industry and each entry offers an introduction and references for further study, making current technology and operating practices available for future generations to learn from. The book also furthers our understanding of the current state of the art, leading to new and more efficient technologies with breakthroughs from new theory and materials. As the land resources approach the exploitation limit, ocean resources are becoming the next choice for the sustainable development. As such, ocean engineering is vital in the 21st century.
Download or read book Uplift Resistance of Caisson Piles in Sand written by Harry Frank MacDonald and published by . This book was released on 1963 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Modelling in Geotechnics Two Volume Set written by Sarah Springman and published by CRC Press. This book was released on 2010-06-17 with total page 1530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book results from the 7th ICPMG meeting in Zurich 2010 and covers a broad range of aspects of physical modelling in geotechnics, linking across to other modelling techniques to consider the entire spectrum required in providing innovative geotechnical engineering solutions. Topics presented at the conference: Soil – Structure – Interaction; Natural Hazards; Earthquake Engineering: Soft Soil Engineering; New Geotechnical Physical; Modelling Facilities; Advanced Experimental Techniques; Comparisons between Physical and Numerical Modelling Specific Topics: Offshore Engineering; Ground Improvement and Foundations; Tunnelling, Excavations and Retaining Structures; Dams and slopes; Process Modelling; Goenvironmental Modelling; Education
Download or read book Geotechnical Characterization and Modelling written by Madhavi Latha Gali and published by Springer Nature. This book was released on 2020-09-18 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select papers presented during the Indian Geotechnical Conference 2018, discussing issues and challenges relating to the characterization of geomaterials, modelling approaches, and geotechnical engineering education. With a combination of field studies, laboratory experiments and modelling approaches, the chapters in this volume address some of the most widely investigated geotechnical engineering topics. This volume will be of interest to researchers and practitioners alike.
Download or read book Piling and Deep Foundations written by J. B. Burland and published by CRC Press. This book was released on 1989 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Single Piles and Pile Groups Under Lateral Loading written by Lymon C. Reese and published by CRC Press. This book was released on 2010-12-15 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complexities of designing piles for lateral loads are manifold as there are many forces that are critical to the design of big structures such as bridges, offshore and waterfront structures and retaining walls. The loads on structures should be supported either horizontally or laterally or in both directions and most structures have in common t
Download or read book Principles of Foundation Engineering written by Braja M. Das and published by Cengage Learning. This book was released on 2018-10-03 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the core concepts and applications of foundation analysis and design with Das/Sivakugan’s best-selling PRINCIPLES OF FOUNDATION ENGINEERING, 9th Edition. Written specifically for those studying undergraduate civil engineering, this invaluable resource by renowned authors in the field of geotechnical engineering provides an ideal balance of today's most current research and practical field applications. A wealth of worked-out examples and figures clearly illustrate the work of today's civil engineer, while timely information and insights help readers develop the critical skills needed to properly apply theories and analysis while evaluating soils and foundation design. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.
Download or read book Full Scale Field Tests of Different Types of Piles written by Jialin Zhou and published by Springer Nature. This book was released on 2021 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides full-scale field tests of different types of pile foundations. For the testing, it includes static load tests which consider various loading orientations, dynamic load tests, inclinometer monitoring and tests that aim to determine the load transfer mechanism of pile foundation. This book also covers the up-to-date popular topic with detailed project studies. This includes the academic investigation of post-grouting technology effect on drilled shaft piles, the research of displacement and non-displacement precast pile foundation, the study of fiber-reinforced polymer material used in the geo-technical environment such as deep excavation pit in tunneling project, and the research of super-long and large diameter pile foundations. These investigations provide essential and academic information for researchers as well as engineers in role of Civil and Geotech. Not only the different types of the piles are studied, but also the relevant theory and literatures are reviewed. In this book, the diagrams are plotted in an easy way and the explanation of the diagrams and tables are described in detail. The research methods corresponding to the practical projects are detailed as well. Hence, it is useful as a reference for the students and researchers in civil and geotechnical engineering.
Download or read book Ultimate Uplift Capacity of Piles in Sand Under Inclined Loads written by Ahmad Ibrahim El-Mahmoud and published by . This book was released on 1985 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Geotechnics written by Frank Wuttke and published by CRC Press. This book was released on 2016-12-01 with total page 743 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Geotechnics includes 97 technical papers presented at the 1st International Conference on Energy Geotechnics (ICEGT 2016, Kiel, Germany, 29-31 August 2016). The contributions provides significant advances and critical challenges facing the areas of fundamentals, constitutive and numerical modelling, testing techniques and energy geotechnics applications. Energy Geotechnics contains seven regular sessions and six minisymposia, with contributions on discrete and continuum based modelling as well as investigations based on experimental studies at various scales. The papers on discrete and continuum based modelling examine the behaviour of gas hydrate sediments, cyclic and Themo-Hydro-Mechanical (T-H-M) modelling of energy piles, non-linear behaviour of energy geo-storage and geo-structures, deformation of geomaterials, modelling of borehole heat exchangers and energy walls, analysis of hydraulic fracturing and discontinuities in reservoirs, engineering problems involving gas hydrates sediments, and modelling of environmental impact of energy geotechnical processes.
