Download or read book Model Integrating Software Components written by Mahdi Derakhshanmanesh and published by Springer. This book was released on 2015-04-30 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: In his study, Mahdi Derakhshanmanesh builds on the state of the art in modeling by proposing to integrate models into running software on the component-level without translating them to code. Such so-called model-integrating software exploits all advantages of models: models implicitly support a good separation of concerns, they are self-documenting and thus improve understandability and maintainability and in contrast to model-driven approaches there is no synchronization problem anymore between the models and the code generated from them. Using model-integrating components, software will be easier to build and easier to evolve by just modifying the respective model in an editor. Furthermore, software may also adapt itself at runtime by transforming its own model part.
Download or read book Model Driven Software Development Integrating Quality Assurance written by Rech, Jrg and published by IGI Global. This book was released on 2008-08-31 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers important concepts, issues, trends, methodologies, and technologies in quality assurance for model-driven software development.
Download or read book Model Driven Engineering Languages and Systems written by Juergen Dingel and published by Springer. This book was released on 2014-09-19 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 17th International Conference on Model Driven Engineering Languages and Systems, MODELS 2014, held in Valencia, Spain, in September/October 2014. The 41 full papers presented in this volume were carefully reviewed and selected from a total of 126 submissions. The scope of the conference series is broad, encompassing modeling languages, methods, tools, and applications considered from theoretical and practical angles and in academic and industrial settings. The papers report on the use of modeling in a wide range of cloud, mobile, and web computing, model transformation behavioral modeling, MDE: past, present, future, formal semantics, specification, and verification, models at runtime, feature and variability modeling, composition and adaptation, practices and experience, modeling for analysis, pragmatics, model extraction, manipulation and persistence, querying, and reasoning.
Download or read book The Role of Model Integration in Complex Systems Modelling written by Manish I. Patel and published by Springer Science & Business Media. This book was released on 2010-09-08 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model integration – the process by which different modelling efforts can be brought together to simulate the target system – is a core technology in the field of Systems Biology. In the work presented here model integration was addressed directly taking cancer systems as an example. An in-depth literature review was carried out to survey the model forms and types currently being utilised. This was used to formalise the main challenges that model integration poses, namely that of paradigm (the formalism on which a model is based), focus (the real-world system the model represents) and scale. A two-tier model integration strategy, including a knowledge-driven approach to address model semantics, was developed to tackle these challenges. In the first step a novel description of models at the level of behaviour, rather than the precise mathematical or computational basis of the model, is developed by distilling a set of abstract classes and properties. These can accurately describe model behaviour and hence describe focus in a way that can be integrated with behavioural descriptions of other models. In the second step this behaviour is decomposed into an agent-based system by translating the models into local interaction rules. The book provides a detailed and highly integrated presentation of the method, encompassing both its novel theoretical and practical aspects, which will enable the reader to practically apply it to their model integration needs in academic research and professional settings. The text is self-supporting. It also includes an in-depth current bibliography to relevant research papers and literature. The review of the current state of the art in tumour modelling provides added value.
Download or read book Quality driven Reuse of Model based Software Architecture Elements written by Busch, Axel and published by KIT Scientific Publishing. This book was released on 2019-10-17 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automotive Embedded Systems Handbook written by Nicolas Navet and published by CRC Press. This book was released on 2017-12-19 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Clear Outline of Current Methods for Designing and Implementing Automotive Systems Highlighting requirements, technologies, and business models, the Automotive Embedded Systems Handbook provides a comprehensive overview of existing and future automotive electronic systems. It presents state-of-the-art methodological and technical solutions in the areas of in-vehicle architectures, multipartner development processes, software engineering methods, embedded communications, and safety and dependability assessment. Divided into four parts, the book begins with an introduction to the design constraints of automotive-embedded systems. It also examines AUTOSAR as the emerging de facto standard and looks at how key technologies, such as sensors and wireless networks, will facilitate the conception of partially and fully autonomous vehicles. The next section focuses on networks and protocols, including CAN, LIN, FlexRay, and TTCAN. The third part explores the design processes of electronic embedded systems, along with new design methodologies, such as the virtual platform. The final section presents validation and verification techniques relating to safety issues. Providing domain-specific solutions to various technical challenges, this handbook serves as a reliable, complete, and well-documented source of information on automotive embedded systems.
Download or read book Embedded Software and Systems written by Zhaohui Wu and published by Springer. This book was released on 2005-08-29 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welcome to the post proceedings of the First International Conference on Embedded Software and Systems (ICESS 2004), which was held in Hangzhou, P. R. China, 9–10 December 2004. Embedded Software and Systems technology is of increasing importance for a wide range of industrial areas, such as aerospace, automotive, telecommunication, and manufacturing automation. Embedded technology is playing an increasingly dominant role in modern society. This is a natural outcome of amazingly fast developments in the embedded field. The ICESS 2004 conference brought together researchers and developers from academia, industry, and government to advance the science, engineering, and technology in embedded software and systems development, and provided them with a forum to present and exchange their ideas, results, work in progress, and experience in all areas of embedded systems research and development. The ICESS 2004 conference attracted much more interest than expected. The total number of paper submissions to the main conference and its three workshops, namely, Pervasive Computing, Automobile Electronics and Tele-communication, was almost 400, from nearly 20 countries and regions. All submissions were reviewed by at least three Program or Technical Committee members or external reviewers. It was extremely difficult to make the final decision on paper acceptance because there were so many excellent, foreseeing, and interesting submissions with brilliant ideas.
Download or read book Effective Methods for Software and Systems Integration written by Boyd L. Summers and published by CRC Press. This book was released on 2016-04-19 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Before software engineering builds and installations can be implemented into software and/or systems integrations in military and aerospace programs, a comprehensive understanding of the software development life cycle is required. Covering all the development life cycle disciplines, Effective Methods for Software and Systems Integration explains h
Download or read book Software Quality Model Based Approaches for Advanced Software and Systems Engineering written by Dietmar Winkler and published by Springer. This book was released on 2014-01-09 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 6th Software Quality Days Conference (SWQD) held in Vienna, Austria, in January 2014. This professional symposium and conference offers a range of comprehensive and valuable opportunities for advanced professional training, new ideas and networking with a series of keynote speeches, professional lectures, exhibits and tutorials. The four scientific full papers accepted for SWQD were each peer reviewed by three or more reviewers and selected out of 24 high-quality submissions. Further, one keynote and ten short papers on promising research directions were also presented and included in order to spark discussions between researchers and practitioners. The papers are organized into topical sections on software process improvement and measurement, requirements management, value-based software engineering, software and systems testing, automation-supported testing and quality assurance and collaboration.
Download or read book Integrated Software Architecture Based Reliability Prediction for IT Systems written by Franz Brosch and published by KIT Scientific Publishing. This book was released on 2014-07-29 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the increasing importance of reliability in business and industrial IT systems, new techniques for architecture-based software reliability prediction are becoming an integral part of the development process. This dissertation thesis introduces a novel reliability modelling and prediction technique that considers the software architecture with its component structure, control and data flow, recovery mechanisms, its deployment to distributed hardware resources and the system�s usage profile.
Download or read book Advances in Information Technology written by Borworn Papasratorn and published by Springer Science & Business Media. This book was released on 2010-10-19 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: It was our intention to organize IAIT 2010 as the place where researchers and ind- trial practitioners could share their work and achievements in information technology, both theoretical and in application. This is the fourth time we have organized IAIT to serve as a venue to foster collaboration among industry and academia from different parts of the world. A lot has been achieved since the launch of the first IAIT in 2005; however, many challenges remain to be addressed in the years to come. IAIT 2010 drew attendance from leading professionals in both industry and academes, as in IAIT 2009. In addition to the relevant program offered by IAIT 2010, the conference p- vided an excellent environment to meet peers in the IT profession, build relationships, and exchange lessons learned. During the conference, participants presented and d- cussed the latest topics in information technology, ranging from technical knowledge and experimentation to future strategic directions. As the Internet continues to reach out even further, almost everything in our daily life is accessible via IP addresses, our societies need to recognize that we need new knowledge to make this advancement become a benefit to all life in this world. It is almost impossible to gain this new knowledge without contributions from our c- leagues, working in various aspects of information technology. Some times, new knowledge found in one area can help simplify difficult task in another. Together we can make our world better by creating applications from information technology.
Download or read book ENTERprise Information Systems written by Maria Manuela Cruz-Cunha and published by Springer Science & Business Media. This book was released on 2011-09-21 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume-set (CCIS 219, CCIS 220, and CCIS 221) constitutes the refereed proceedings of the International Conference on ENTERprise Information Systems, CENTERIS 2011, held in Vilamoura, Portugal, in September 2011. The approx. 120 revised full papers presented in the three volumes were carefully reviewed and selected from 180 submissions. The papers are organized in topical sections on knowledge society, EIS adoption and design, EIS implementation and impact, EIS applications, social aspects and IS in education, IT/IS management, telemedicine and imaging technologies, healthcare information management, medical records and business processes, decision support systems and business intelligence in health and social care contexts, architectures and emerging technologies in healthcare organizations, as well as m-health.
Download or read book Software Engineering for Experimental Robotics written by Davide Brugali and published by Springer Science & Business Media. This book was released on 2007-02-15 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the concepts and ideas discussed at the well attended ICRA2005 Workshop on "Principles and Practice of Software Development in Robotics", held in Barcelona, Spain, April 18 2005. It collects contributions that describe the state of the art in software development for the Robotics domain. It also reports a number of practical applications to real systems and discuss possible future developments.
Download or read book Component Based Software Engineering written by Ian Gorton and published by Springer Science & Business Media. This book was released on 2006-06-20 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the refereed proceedings of the 9th International Symposium on Component-Based Software Engineering, CBSE 2006, held in Västerås, Sweden in June/July 2006. The 22 revised full papers and 9 revised short papers presented cover issues concerned with the development of software-intensive systems from reusable parts, the development of reusable parts, and system maintenance and improvement by means of component replacement and customization.
Download or read book Ecological Modeling written by Hsiao-Hsuan Wang and published by Elsevier. This book was released on 2019-08-14 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ecological Modeling: An Introduction to the Art and Science of Modeling Ecological Systems, Volume 31, presents the skills needed to appropriately evaluate and use ecological models. Illustrated throughout with practical examples, the book discusses ecological modeling as both an art and a science, balancing the qualitative (artistic) side, with its foundations in common sense and modeling practice, against the quantitative (scientific) aspects of the modeling process. This book draws on the authors’ extensive experience in both teaching and using these techniques to provide readers with a practical, user-friendly guide that supports and encourages the appropriate, effective use of these tools. Provides readers with a commonsense understanding of the systems perspective and its foundations in general system theory Highlights the importance of a solid understanding of the qualitative aspects of the modeling process Facilitates the ability to appropriately evaluate and use ecological models Supports learning with a variety of simple examples to instill the desire and confidence to embark upon the modeling experience
Download or read book Development of a Decision Support System for Groundwater Pollution Assessment written by N. Kukuric and published by CRC Press. This book was released on 2020-04-22 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the development of the decision support system for groundwater pollution assessment, one of the first integrated information systems in the field of hydrogeology, reflecting the purpose of knowledge encapsulation in the field of groundwater quality management.
Download or read book Integrated Environmental Modelling to Solve Real World Problems written by A.T. Riddick and published by Geological Society of London. This book was released on 2017-01-10 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: The discipline of Integrated Environmental Modelling (IEM) has developed in order to solve complex environmental problems, for example understanding the impacts of climate change on the physical environment. IEM provides methods to fuse or link models together, this in turn requires facilities to make models discoverable and also to make the outputs of modelling easily visualized. The vision and challenges for IEM going forward are summarized by leading proponents. Several case studies describe the application of model fusion to a range of real-world problems including integrating groundwater and recharge models within the UK Environment Agency, and the development of ‘catastrophe’ models to predict better the impact of natural hazards. Communicating modelling results to end users who are often not specialist modellers is also an emerging area of research addressed within the volume. Also included are papers that highlight current developments of the technology platforms underpinning model fusion.
