Download or read book Model Driven Risk Analysis written by Mass Soldal Lund and published by Springer Science & Business Media. This book was released on 2010-10-20 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term “risk” is known from many fields, and we are used to references to contractual risk, economic risk, operational risk, legal risk, security risk, and so forth. We conduct risk analysis, using either offensive or defensive approaches to identify and assess risk. Offensive approaches are concerned with balancing potential gain against risk of investment loss, while defensive approaches are concerned with protecting assets that already exist. In this book, Lund, Solhaug and Stølen focus on defensive risk analysis, and more explicitly on a particular approach called CORAS. CORAS is a model-driven method for defensive risk analysis featuring a tool-supported modelling language specially designed to model risks. Their book serves as an introduction to risk analysis in general, including the central concepts and notions in risk analysis and their relations. The authors’ aim is to support risk analysts in conducting structured and stepwise risk analysis. To this end, the book is divided into three main parts. Part I of the book introduces and demonstrates the central concepts and notation used in CORAS, and is largely example-driven. Part II gives a thorough description of the CORAS method and modelling language. After having completed this part of the book, the reader should know enough to use the method in practice. Finally, Part III addresses issues that require special attention and treatment, but still are often encountered in real-life risk analysis and for which CORAS offers helpful advice and assistance. This part also includes a short presentation of the CORAS tool support. The main target groups of the book are IT practitioners and students at graduate or undergraduate level. They will appreciate a concise introduction into the emerging field of risk analysis, supported by a sound methodology, and completed with numerous examples and detailed guidelines.

Download or read book Risk Modeling Assessment and Management written by Yacov Y. Haimes and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines timely multidisciplinary applications, problems, and case histories in risk modeling, assessment, and management Risk Modeling, Assessment, and Management, Third Edition describes the state of the art of risk analysis, a rapidly growing field with important applications in engineering, science, manufacturing, business, homeland security, management, and public policy. Unlike any other text on the subject, this definitive work applies the art and science of risk analysis to current and emergent engineering and socioeconomic problems. It clearly demonstrates how to quantify risk and construct probabilities for real-world decision-making problems, including a host of institutional, organizational, and political issues. Avoiding higher mathematics whenever possible, this important new edition presents basic concepts as well as advanced material. It incorporates numerous examples and case studies to illustrate the analytical methods under discussion and features restructured and updated chapters, as well as: A new chapter applying systems-driven and risk-based analysis to a variety of Homeland Security issues An accompanying FTP site—developed with Professor Joost Santos—that offers 150 example problems with an Instructor's Solution Manual and case studies from a variety of journals Case studies on the 9/11 attack and Hurricane Katrina An adaptive multiplayer Hierarchical Holographic Modeling (HHM) game added to Chapter Three This is an indispensable resource for academic, industry, and government professionals in such diverse areas as homeland and cyber security, healthcare, the environment, physical infrastructure systems, engineering, business, and more. It is also a valuable textbook for both undergraduate and graduate students in systems engineering and systems management courses with a focus on our uncertain world.

Download or read book Risk Assessment and Risk Driven Testing written by Thomas Bauer and published by Springer. This book was released on 2014-07-09 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed conference proceedings of the First International Workshop on Risk Assessment and Risk-driven Testing, RISK 2013, held in conjunction with 25th IFIP International Conference on Testing Software and Systems, ICTSS 2013, in Istanbul, Turkey, in November 2013. The revised full papers were carefully reviewed and selected from 13 submissions. The papers are organized in topical sections on risk analysis, risk modeling and risk-based testing.

Download or read book Risk Analysis written by Jean-Marie Flaus and published by John Wiley & Sons. This book was released on 2013-08-05 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of the methods used for risk analysis in a variety of industrial sectors, with a particular focus on the consideration of human aspects, this book provides a definition of all the fundamental notions associated with risks and risk management, as well as clearly placing the discipline of risk analysis within the broader context of risk management processes. The author begins by presenting a certain number of basic concepts, followed by the general principle of risk analysis. He then moves on to examine the ISO31000 standard, which provides a specification for the implementation of a risk management approach. The ability to represent the information we use is crucial, so the representation of knowledge, covering both information concerning the risk occurrence mechanism and details of the system under scrutiny, is also considered. The different analysis methods are then presented, firstly for the identification of risks, then for their analysis in terms of cause and effect, and finally for the implementation of safety measures. Concrete examples are given throughout the book and the methodology and method can be applied to various fields (industry, health, organization, technical systems). Contents Part 1. General Concepts and Principles 1. Introduction. 2. Basic Notions. 3. Principles of Risk Analysis Methods. 4. The Risk Management Process (ISO31000). Part 2. Knowledge Representation 5. Modeling Risk. 6. Measuring the Importance of a Risk. 7. Modeling of Systems for Risk Analysis. Part 3. Risk Analysis Method 8. Preliminary Hazard Analysis. 9. Failure Mode and Effects Analysis. 10. Deviation Analysis Using the HAZOP Method. 11. The Systemic and Organized Risk Analysis Method. 12. Fault Tree Analysis. 13. Event Tree and Bow-Tie Diagram Analysis. 14. Human Reliability Analysis. 15. Barrier Analysis and Layer of Protection Analysis. Part 4. Appendices Appendix 1. Occupational Hazard Checklists. Appendix 2. Causal Tree Analysis. Appendix 3. A Few Reminders on the Theory of Probability. Appendix 4. Useful Notions in Reliability Theory. Appendix 5. Data Sources for Reliability. Appendix 6. A Few Approaches for System Modelling. Appendix 7. CaseStudy: Chemical Process. Appendix 8. XRisk Software. About the Authors Jean-Marie Flaus is Professor at Joseph Fourier University in Grenoble, France.

Download or read book Risk Assessment and Risk Driven Quality Assurance written by Jürgen Großmann and published by Springer. This book was released on 2017-04-21 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed conference proceedings of the Fourth International Workshop on Risk Assessment and Risk-Driven Quality Assurance, RISK 2016, held in conjunction with ICTSS 2016, in Graz, Austria, in October 2016. The revised 9 full papers were carefully reviewed and selected from 11 submissions. They focus on research studying, developing and evaluating innovative techniques, tools, languages and methods risk assessment and risk-driven quality engineering. The papers are organized topical sections: security risk management; security risk analysis; risk-based testing.

Download or read book Risk Assessment and Risk Driven Testing written by Fredrik Seehusen and published by Springer. This book was released on 2015-11-12 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed conference proceedings of the Third International Workshop on Risk Assessment and Risk-driven Testing, RISK 2015, held in conjunction with the OMG Technical Meeting in Berlin, Germany, in June 2015. The revised 8 full papers were carefully reviewed and selected from 12 submissions. This workshop addresses systematic approaches that combine risk assessment and testing. Also, the workshop was structured into the three sessions namely Risk Assessment, Risk and Development and Security Testing.

Download or read book Foundations of Security Analysis and Design VII written by Alessandro Aldini and published by Springer. This book was released on 2014-08-04 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: FOSAD has been one of the foremost educational events established with the goal of disseminating knowledge in the critical area of security in computer systems and networks. Over the years, both the summer school and the book series have represented a reference point for graduate students and young researchers from academia or industry, interested to approach the field, investigate open problems, and follow priority lines of research. This book presents thoroughly revised versions of nine tutorial lectures given by leading researchers during three International Schools on Foundations of Security Analysis and Design, FOSAD, held in Bertinoro, Italy, in September 2012 and 2013. The topics covered in this book include model-based security, automatic verification of secure applications, information flow analysis, cryptographic voting systems, encryption in the cloud, and privacy preservation.

Download or read book Security Compliance in Model driven Development of Software Systems in Presence of Long Term Evolution and Variants written by Sven Matthias Peldszus and published by Springer Nature. This book was released on 2022-07-13 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: For ensuring a software system's security, it is vital to keep up with changing security precautions, attacks, and mitigations. Although model-based development enables addressing security already at design-time, design models are often inconsistent with the implementation or among themselves. An additional burden are variants of software systems. To ensure security in this context, we present an approach based on continuous automated change propagation, allowing security experts to specify security requirements on the most suitable system representation. We automatically check all system representations against these requirements and provide security-preserving refactorings for preserving security compliance. For both, we show the application to variant-rich software systems. To support legacy systems, we allow to reverse-engineer variability-aware UML models and semi-automatically map existing design models to the implementation. Besides evaluations of the individual contributions, we demonstrate the approach in two open-source case studies, the iTrust electronics health records system and the Eclipse Secure Storage.

Download or read book Engineering Secure Future Internet Services and Systems written by Maritta Heisel and published by Springer. This book was released on 2014-05-22 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This State-of-the-Art Survey contains a selection of papers representing state-of-the-art results in the engineering of secure software-based Future Internet services and systems, produced by the NESSoS project researchers. The engineering approach of the Network of Excellence NESSoS, funded by the European Commission, is based on the principle of addressing security concerns from the very beginning in all software development phases, thus contributing to reduce the amount of software vulnerabilities and enabling the systematic treatment of security needs through the engineering process. The 15 papers included in this volume deal with the main NESSoS research areas: security requirements for Future Internet services; creating secure service architectures and secure service design; supporting programming environments for secure and composable services; enabling security assurance and integrating former results in a risk-aware and cost-aware software life-cycle.

Download or read book Services SERVICES 2018 written by Alvin Yang and published by Springer. This book was released on 2018-06-22 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 14th World Congress on Services, SERVICES 2018, held as part of the Services Conference Federation, SCF 2018, in Seattle, USA, in June 2018. The 10 full papers and 3 short papers presented were carefully reviewed and selected from 22 submissions. The papers cover topics in the field of software foundations and applications with a focus on novel approaches for engineering requirements, design and architectures, testing, maintenance and evolution, model-driven development, software processes, metrics, quality assurance and new software economics models, search-based software engineering, benefiting day-to-day services sectors and derived through experiences, with appreciation to scale, pragmatism, transparency, compliance and/or dependability.

Download or read book Cyber Risk Management written by Atle Refsdal and published by Springer. This book was released on 2015-10-01 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a brief and general introduction to cybersecurity and cyber-risk assessment. Not limited to a specific approach or technique, its focus is highly pragmatic and is based on established international standards (including ISO 31000) as well as industrial best practices. It explains how cyber-risk assessment should be conducted, which techniques should be used when, what the typical challenges and problems are, and how they should be addressed. The content is divided into three parts. First, part I provides a conceptual introduction to the topic of risk management in general and to cybersecurity and cyber-risk management in particular. Next, part II presents the main stages of cyber-risk assessment from context establishment to risk treatment and acceptance, each illustrated by a running example. Finally, part III details four important challenges and how to reasonably deal with them in practice: risk measurement, risk scales, uncertainty, and low-frequency risks with high consequence. The target audience is mainly practitioners and students who are interested in the fundamentals and basic principles and techniques of security risk assessment, as well as lecturers seeking teaching material. The book provides an overview of the cyber-risk assessment process, the tasks involved, and how to complete them in practice.

Download or read book Foundations of Security Analysis and Design VI written by Alessandro Aldini and published by Springer. This book was released on 2011-08-19 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: FOSAD has been one of the foremost educational events established with the goal of disseminating knowledge in the critical area of security in computer systems and networks. Offering a timely spectrum of current research in foundations of security, FOSAD also proposes panels dedicated to topical open problems, and giving presentations about ongoing work in the field, in order to stimulate discussions and novel scientific collaborations. This book presents thoroughly revised versions of nine tutorial lectures given by leading researchers during three International Schools on Foundations of Security Analysis and Design, FOSAD, held in Bertinoro, Italy, in September 2010 and August/September 2011. The topics covered in this book include privacy and data protection; security APIs; cryptographic verification by typing; model-driven security; noninterfer-quantitative information flow analysis; and risk analysis.

Download or read book Applicable Formal Methods for Safe Industrial Products written by Anne E. Haxthausen and published by Springer Nature. This book was released on 2023-09-17 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Festschrift, dedicated to Jan Peleska on the occasion of his 65th birthday, contains papers written by many of his closest collaborators in academic and industry research. After studying mathematics at the University of Hamburg, Jan worked with Philips and Deutsche System-Technik on fault-tolerant systems, distributed systems, database systems, and safety-critical embedded systems. Since 1994 he has worked as a consultant to industry, specializing in development methods, verification, validation and test of safety-critical systems, and since 1995 he has been a Professor of Computer Science at the University of Bremen. In his research he has been most interested in the combination and application of existing methods and corresponding tools to real-world problems, particularly in the field of safety-critical embedded systems and distributed systems, including avionics and railway control systems. The papers in this volume reflect those interests, and the impact he has had on colleagues and collaborators. The volume is structured into sections on testing; railway verification and safety & security; intelligent systems and cyber-physical systems; and tools and techniques for specification, verification and code generation.

Download or read book Advances in Service Oriented and Cloud Computing written by Antonio Celesti and published by Springer. This book was released on 2016-04-26 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the technical papers presented in the seven high-quality workshops associated with the European Conference on Service-Oriented and Cloud Computing, ESOCC 2015, held in Taormina, Italy, in September 2015: Third International Workshop on Cloud for IoT (CLloT 2015), 5th International Workshop on Adaptive Services for the Future Internet (WAS4FI 2015), Second Workshop on Seamless Adaptive Multi-cloud Management of Service-Based Applications (SeaClouds 2015), First International Workshop on Cloud Adoption and Migration (CloudWay 2015), First International Workshop on Digital Enterprise Architecture and Engineering (IDEA 2015), First Workshop on Federated Cloud Networking (FedCloudNet 2015). Abstracts of the presentations held at the European Projects Forum (EU Projects 2015) are included in the back matter of this volume. The 25 full papers and 6 short papers were carefully reviewed and selected from 48 submissions. They focus on specific topics in service-oriented and cloud computing domains such as limits and /or advantages of existing cloud solutions, Future Internet technologies, efficient and adaptive deployment and management of service-based applications across multiple clouds, novel cloud service migration practices and solutions, digitization of enterprises in the cloud computing era, federated cloud networking services.

Download or read book Safety and Reliability Methodology and Applications written by Tomasz Nowakowski and published by CRC Press. This book was released on 2014-09-01 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the last fifty years the performance requirements for technical objects and systems were supplemented with: customer expectations (quality), abilities to prevent the loss of the object properties in operation time (reliability and maintainability), protection against the effects of undesirable events (safety and security) and the ability to

Download or read book Safety Reliability and Risk Analysis written by R.D.J.M. Steenbergen and published by CRC Press. This book was released on 2013-09-18 with total page 3422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods of risk and reliability analysis are becoming increasingly important as decision support tools in various fields of engineering. Safety, Reliability and Risk Analysis: Beyond the Horizon covers a wide range of topics for which risk analysis forms an indispensable field of knowledge to ensure sufficient safety.

Download or read book Software Quality Increasing Value in Software and Systems Development written by Dietmar Winkler and published by Springer. This book was released on 2013-01-03 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 5th Software Quality Days Conference (SWQD) held in Vienna, Austria, in January 2013. This professional symposium and conference offers a range of comprehensive and valuable opportunities for advanced professional training, new ideas, and networking with a series of keynote speeches, professional lectures, exhibits, and tutorials. The seven scientific full papers accepted for SWQD were each peer-reviewed by three or more reviewers and selected out of 18 high-quality submissions. Further, two keynotes and six short papers on promising research directions were also presented and included in order to spark discussions between researchers and practitioners. The papers are organized into topical sections on risk management; software and systems testing; test processes; model-based development; and process improvement and measurement.