Download or read book Model Based Monitoring and Statistical Control written by Kohei Ohtsu and published by CRC Press. This book was released on 2024-06-11 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Available in English for the first time, this classic and influential book by the late Kohei Ohtsu presents real examples of ships in motion under irregular ocean waves, how to understand the characteristics of fluctuations of stochastic phenomena through spectral analysis methods and statistical modeling. It also explains how to realize prediction and optimal control based on time series models. In recent years, the need to improve safety and reduce environmental impact in ship operations has been increasing, and the statistical methods presented in this book will be increasingly needed in the future. In addition, the recent development of innovative AI technology and highspeed communications will make it possible to adapt this method not only to ship monitoring and control, but also to any field that involves irregular fluctuations, and it is expected to contribute to solving issues that have been difficult to solve in the past. Part 1 describes classical spectral method for the analysis of stochastic phenomena. In Part 2, this book explains methods to construct time series models using the information criterion, to capture the characteristics of ship and engine motions using the model, to design a model-based monitoring system that informs navigators operating the ship and managers ashore. Furthermore, it explains statistical control method to design an autopilot system and the governor of a marine engine, while showing actual examples. Part 3 presents the basic knowledge necessary for understanding these topics of the book, namely, the basic theory of ship motion, probability and statistics, Kalman filter and statistical optimal control theory.
Download or read book Statistical Process Monitoring Using Advanced Data Driven and Deep Learning Approaches written by Fouzi Harrou and published by Elsevier. This book was released on 2020-07-03 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Statistical Process Monitoring Using Advanced Data-Driven and Deep Learning Approaches tackles multivariate challenges in process monitoring by merging the advantages of univariate and traditional multivariate techniques to enhance their performance and widen their practical applicability. The book proceeds with merging the desirable properties of shallow learning approaches – such as a one-class support vector machine and k-nearest neighbours and unsupervised deep learning approaches – to develop more sophisticated and efficient monitoring techniques. Finally, the developed approaches are applied to monitor many processes, such as waste-water treatment plants, detection of obstacles in driving environments for autonomous robots and vehicles, robot swarm, chemical processes (continuous stirred tank reactor, plug flow rector, and distillation columns), ozone pollution, road traffic congestion, and solar photovoltaic systems. Uses a data-driven based approach to fault detection and attribution Provides an in-depth understanding of fault detection and attribution in complex and multivariate systems Familiarises you with the most suitable data-driven based techniques including multivariate statistical techniques and deep learning-based methods Includes case studies and comparison of different methods
Download or read book Statistical Control by Monitoring and Adjustment written by George E. P. Box and published by John Wiley & Sons. This book was released on 2011-09-09 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the First Edition "This book . . . is a significant addition to the literature onstatistical practice . . . should be of considerable interest tothose interested in these topics."—International Journal ofForecasting Recent research has shown that monitoring techniques alone areinadequate for modern Statistical Process Control (SPC), and thereexists a need for these techniques to be augmented by methods thatindicate when occasional process adjustment is necessary.Statistical Control by Monitoring and Adjustment, Second Editionpresents the relationship among these concepts and elementary ideasfrom Engineering Process Control (EPC), demonstrating how thepowerful synergistic association between SPC and EPC can solvenumerous problems that are frequently encountered in processmonitoring and adjustment. The book begins with a discussion of SPC as it was originallyconceived by Dr. Walter A. Shewhart and Dr. W. Edwards Deming.Subsequent chapters outline the basics of the new integration ofSPC and EPC, which is not available in other related books.Thorough coverage of time series analysis for forecasting, processdynamics, and non-stationary models is also provided, and thesesections have been carefully written so as to require only anelementary understanding of mathematics. Extensive graphicalexplanations and computational tables accompany the numerousexamples that are provided throughout each chapter, and a helpfulselection of problems and solutions further facilitatesunderstanding. Statistical Control by Monitoring and Adjustment, Second Editionis an excellent book for courses on applied statistics andindustrial engineering at the upper-undergraduate and graduatelevels. It also serves as a valuable reference for statisticiansand quality control practitioners working in industry.
Download or read book Multivariate Statistical Process Control written by Zhiqiang Ge and published by Springer Science & Business Media. This book was released on 2012-11-28 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given their key position in the process control industry, process monitoring techniques have been extensively investigated by industrial practitioners and academic control researchers. Multivariate statistical process control (MSPC) is one of the most popular data-based methods for process monitoring and is widely used in various industrial areas. Effective routines for process monitoring can help operators run industrial processes efficiently at the same time as maintaining high product quality. Multivariate Statistical Process Control reviews the developments and improvements that have been made to MSPC over the last decade, and goes on to propose a series of new MSPC-based approaches for complex process monitoring. These new methods are demonstrated in several case studies from the chemical, biological, and semiconductor industrial areas. Control and process engineers, and academic researchers in the process monitoring, process control and fault detection and isolation (FDI) disciplines will be interested in this book. It can also be used to provide supplementary material and industrial insight for graduate and advanced undergraduate students, and graduate engineers. Advances in Industrial Control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
Download or read book Statistical Process Monitoring and Optimization written by Geoffrey Vining and published by CRC Press. This book was released on 1999-11-24 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demonstrates ways to track industrial processes and performance, integrating related areas such as engineering process control, statistical reasoning in TQM, robust parameter design, control charts, multivariate process monitoring, capability indices, experimental design, empirical model building, and process optimization. The book covers a range of statistical methods and emphasizes practical applications of quality control systems in manufacturing, organization and planning.
Download or read book Road Traffic Modeling and Management written by Fouzi Harrou and published by Elsevier. This book was released on 2021-10-05 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Road Traffic Modeling and Management: Using Statistical Monitoring and Deep Learning provides a framework for understanding and enhancing road traffic monitoring and management. The book examines commonly used traffic analysis methodologies as well the emerging methods that use deep learning methods. Other sections discuss how to understand statistical models and machine learning algorithms and how to apply them to traffic modeling, estimation, forecasting and traffic congestion monitoring. Providing both a theoretical framework along with practical technical solutions, this book is ideal for researchers and practitioners who want to improve the performance of intelligent transportation systems. Provides integrated, up-to-date and complete coverage of the key components for intelligent transportation systems: traffic modeling, forecasting, estimation and monitoring Uses methods based on video and time series data for traffic modeling and forecasting Includes case studies, key processes guidance and comparisons of different methodologies
Download or read book Process Monitoring and Fault Diagnosis Based on Multivariable Statistical Analysis written by Xiangyu Kong and published by Springer Nature. This book was released on with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 18th European Symposium on Computer Aided Process Engineering written by Bertrand Braunschweig and published by Elsevier. This book was released on 2008-05-15 with total page 1233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 18th European Symposium on Computer Aided Process Engineering contains papers presented at the 18th European Symposium of Computer Aided Process Engineering (ESCAPE 18) held in Lyon, France, from 1-4 June 2008.The ESCAPE series brings the latest innovations and achievements by leading professionals from the industrial and academic communities. The series serves as a forum for engineers, scientists, researchers, managers and students from academia and industry to:- present new computer aided methods, algorithms, techniques related to process and product engineering,- discuss innovative concepts, new challenges, needs and trends in the area of CAPE.This research area bridges fundamental sciences (physics, chemistry, thermodynamics, applied mathematics and computer sciences) with the various aspects of process and product engineering.The special theme for ESCAPE-18 is CAPE for the Users! CAPE systems are to be put in the hands of end users who need functionality and assistance beyond the scientific and technological capacities which are at the core of the systems. The four main topics are:- off-line systems for synthesis and design,- on-line systems for control and operation,- computational and numerical solutions strategies,- integrated and multi-scale modelling and simulation,Two general topics address the impact of CAPE tools and methods on Society and Education. * CD-ROM that accompanies the book contains all research papers and contributions* International in scope with guest speeches and keynote talks from leaders in science and industry* Presents papers covering the latest research, key top areas and developments in Computer Aided Process Engineering
Download or read book Aspects of Statistical Process Control and Model Monitoring written by Ivan Chung Hang Lai and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sequential Analysis written by Alexander Tartakovsky and published by CRC Press. This book was released on 2014-08-27 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sequential Analysis: Hypothesis Testing and Changepoint Detection systematically develops the theory of sequential hypothesis testing and quickest changepoint detection. It also describes important applications in which theoretical results can be used efficiently. The book reviews recent accomplishments in hypothesis testing and changepoint detection both in decision-theoretic (Bayesian) and non-decision-theoretic (non-Bayesian) contexts. The authors not only emphasize traditional binary hypotheses but also substantially more difficult multiple decision problems. They address scenarios with simple hypotheses and more realistic cases of two and finitely many composite hypotheses. The book primarily focuses on practical discrete-time models, with certain continuous-time models also examined when general results can be obtained very similarly in both cases. It treats both conventional i.i.d. and general non-i.i.d. stochastic models in detail, including Markov, hidden Markov, state-space, regression, and autoregression models. Rigorous proofs are given for the most important results. Written by leading authorities in the field, this book covers the theoretical developments and applications of sequential hypothesis testing and sequential quickest changepoint detection in a wide range of engineering and environmental domains. It explains how the theoretical aspects influence the hypothesis testing and changepoint detection problems as well as the design of algorithms.
Download or read book Data Driven and Model Based Methods for Fault Detection and Diagnosis written by Majdi Mansouri and published by Elsevier. This book was released on 2020-02-05 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data-Driven and Model-Based Methods for Fault Detection and Diagnosis covers techniques that improve the quality of fault detection and enhance monitoring through chemical and environmental processes. The book provides both the theoretical framework and technical solutions. It starts with a review of relevant literature, proceeds with a detailed description of developed methodologies, and then discusses the results of developed methodologies, and ends with major conclusions reached from the analysis of simulation and experimental studies. The book is an indispensable resource for researchers in academia and industry and practitioners working in chemical and environmental engineering to do their work safely. Outlines latent variable based hypothesis testing fault detection techniques to enhance monitoring processes represented by linear or nonlinear input-space models (such as PCA) or input-output models (such as PLS) Explains multiscale latent variable based hypothesis testing fault detection techniques using multiscale representation to help deal with uncertainty in the data and minimize its effect on fault detection Includes interval PCA (IPCA) and interval PLS (IPLS) fault detection methods to enhance the quality of fault detection Provides model-based detection techniques for the improvement of monitoring processes using state estimation-based fault detection approaches Demonstrates the effectiveness of the proposed strategies by conducting simulation and experimental studies on synthetic data
Download or read book Statistical Process Control Methods for Network Monitoring Using Generalized Linear Mixed Model written by Yingzhuo Fu and published by . This book was released on 2013 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Network surveillance algorithms are becoming increasingly important as the ability to monitor a wide variety of data is rapidly expanding. Traffic metrics are usually count data that display a non-stationary pattern in their mean structure. We propose to model traffic counts using a generalized linear mixed model to capture these features. We then develop three tracking statistics proposed for anomaly detection. Two of the statistics are derived variants of a generalized likelihood ratio approach, which itself is not computationally tractable. The first of these variants is based on an approximation to the integrated likelihood while the second is based on the concept of h-likelihood. We also consider a tracking statistic that is an exponentially weighted moving average. We investigate the properties of the three tracking statistics from the point of view of false alarm rate and detection power, and compare the proposed tracking statistics with current literature. Our comparisons show that the two generalized likelihood ratio variants are preferred choices as SPC tools for network surveillance. Computational aspects of the three procedures are also discussed.
Download or read book Fault Diagnosis Applications written by Rolf Isermann and published by Springer Science & Business Media. This book was released on 2011-04-06 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supervision, condition-monitoring, fault detection, fault diagnosis and fault management play an increasing role for technical processes and vehicles in order to improve reliability, availability, maintenance and lifetime. For safety-related processes fault-tolerant systems with redundancy are required in order to reach comprehensive system integrity. This book is a sequel of the book “Fault-Diagnosis Systems” published in 2006, where the basic methods were described. After a short introduction into fault-detection and fault-diagnosis methods the book shows how these methods can be applied for a selection of 20 real technical components and processes as examples, such as: Electrical drives (DC, AC) Electrical actuators Fluidic actuators (hydraulic, pneumatic) Centrifugal and reciprocating pumps Pipelines (leak detection) Industrial robots Machine tools (main and feed drive, drilling, milling, grinding) Heat exchangers Also realized fault-tolerant systems for electrical drives, actuators and sensors are presented. The book describes why and how the various signal-model-based and process-model-based methods were applied and which experimental results could be achieved. In several cases a combination of different methods was most successful. The book is dedicated to graduate students of electrical, mechanical, chemical engineering and computer science and for engineers.
Download or read book Statistical Control written by George E. P. Box and published by Wiley-Interscience. This book was released on 1997-09-22 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed, practical, accessible guide to efficient statistical control. Efficient control is a key element in the improvement and maintenance of quality and productivity. This book shows the advantages of bringing together the more commonly used methods of statistical quality control with appropriate techniques of feedback adjustment. It uses recent research and practical experience to provide feedback methods of immediate use in the workplace. Statistical Control by Monitoring and Feedback Adjustment introduces a new coordinated approach to quality control. The authors' clear and cogent presentation uses extensive graphical explanation supplemented by numerous examples and computational tables. A helpful selection of problems and solutions further facilitates understanding. Topics covered include: * A fresh look at process monitoring * Using feedback adjustment charts * Minimizing the size of adjustments * Feedback techniques that minimize costs of adjustment and sampling * Detection of special causes with Cuscore Statistics * Efficient monitoring of operating feedback systems * The roles of models, optimization, and robustness * A brief review of time series analysis. Statistical Control by Monitoring and Feedback Adjustment is important reading for quality control engineers and statisticians as well as graduate students in quality control, industrial engineering, and applied statistics.
Download or read book Statistical Analysis of Profile Monitoring written by Rassoul Noorossana and published by John Wiley & Sons. This book was released on 2011-09-09 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: A one-of-a-kind presentation of the major achievements in statistical profile monitoring methods Statistical profile monitoring is an area of statistical quality control that is growing in significance for researchers and practitioners, specifically because of its range of applicability across various service and manufacturing settings. Comprised of contributions from renowned academicians and practitioners in the field, Statistical Analysis of Profile Monitoring presents the latest state-of-the-art research on the use of control charts to monitor process and product quality profiles. The book presents comprehensive coverage of profile monitoring definitions, techniques, models, and application examples, particularly in various areas of engineering and statistics. The book begins with an introduction to the concept of profile monitoring and its applications in practice. Subsequent chapters explore the fundamental concepts, methods, and issues related to statistical profile monitoring, with topics of coverage including: Simple and multiple linear profiles Binary response profiles Parametric and nonparametric nonlinear profiles Multivariate linear profiles monitoring Statistical process control for geometric specifications Correlation and autocorrelation in profiles Nonparametric profile monitoring Throughout the book, more than two dozen real-world case studies highlight the discussed topics along with innovative examples and applications of profile monitoring. Statistical Analysis of Profile Monitoring is an excellent book for courses on statistical quality control at the graduate level. It also serves as a valuable reference for quality engineers, researchers and anyone who works in monitoring and improving statistical processes.
Download or read book Statistical Process Monitoring and Optimization written by Geoffrey Vining and published by CRC Press. This book was released on 1999-11-24 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demonstrates ways to track industrial processes and performance, integrating related areas such as engineering process control, statistical reasoning in TQM, robust parameter design, control charts, multivariate process monitoring, capability indices, experimental design, empirical model building, and process optimization. The book covers a range o
Download or read book Statistical Process Control in Automated Manufacturing written by Bert Keats and published by CRC Press. This book was released on 2020-11-26 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to statistical process control in automated manufacturing and suggests implementation strategies. It focuses on time series applications in statistical process control and explores the role of knowledge-based systems in process control.