Download or read book Model Based Control of Flying Robots for Robust Interaction Under Wind Influence written by Teodor Tomić and published by Springer Nature. This book was released on 2022-10-07 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the topic of autonomous flying robots physically interacting with the environment under the influence of wind. It aims to make aerial robots aware of the disturbance, interaction, and faults acting on them. This requires reasoning about the external wrench (force and torque) acting on the robot and distinguishing between wind, interactions, and collisions. The book takes a model-based approach and covers a systematic approach to parameter identification for flying robots. The book aims to provide a wind speed estimate independent of the external wrench, including estimating the wind speed using motor power measurements. Aerodynamics modeling is approached in a data-driven fashion, using ground-truth measurements from a 4D wind tunnel. Finally, the book bridges the gap between trajectory tracking and interaction control, to allow physical interaction under wind influence. Theoretical results are accompanied by extensive simulation and experimental results.

Download or read book Omnidirectional Tilt Rotor Flying Robots for Aerial Physical Interaction written by Karen Bodie and published by Springer Nature. This book was released on 2024-01-21 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the study of tilt-rotor omnidirectional aerial robots and their application to aerial physical interaction tasks. Omnidirectional aerial robots possess decoupled translational and rotational dynamics, which are important for stable and sustained aerial interaction. The additional ability to dynamically re-orient thrust vectors opens the door to a wide array of possible morphologies and system capabilities. Through modeling, control, prototype design, and experimental evaluation, this book presents a comprehensive methodology and examples for the development of a novel tilt-rotor aerial manipulator. This work serves as a guide for envisioning and constructing innovative systems that will advance the frontier of aerial manipulation.

Download or read book Theory and Applications for Control of Aerial Robots in Physical Interaction Through Tethers written by Marco Tognon and published by Springer Nature. This book was released on 2020-06-26 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book studies how autonomous aerial robots physically interact with the surrounding environment. Intended to promote the advancement of aerial physical interaction, it analyzes a particular class of aerial robots: tethered aerial vehicles. By examining specific systems, while still considering the challenges of the general problem, it will help readers acquire the knowledge and expertise needed for the subsequent development of more general methods applicable to aerial physical interaction. The formal analysis covers topics ranging from control, state estimation, and motion planning, to experimental validation. Addressing both theoretical and technical aspects, the book is intended for a broad academic and industrial readership, including undergraduate students, researchers and engineers. It can be used as a teaching reference, or as the basis for product development.

Download or read book Robotics Research written by Nancy M. Amato and published by Springer Nature. This book was released on 2019-11-28 with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt: ISRR, the "International Symposium on Robotics Research", is one of robotics pioneering Symposia, which has established over the past two decades some of the field's most fundamental and lasting contributions. This book presents the results of the eighteenth edition of "Robotics Research" ISRR17, offering a collection of a broad range of topics in robotics. This symposium took place in Puerto Varas, Chile from December 11th to December 14th, 2017. The content of the contributions provides a wide coverage of the current state of robotics research, the advances and challenges in its theoretical foundation and technology basis, and the developments in its traditional and new emerging areas of applications. The diversity, novelty, and span of the work unfolding in these areas reveal the field's increased maturity and expanded scope and define the state of the art of robotics and its future direction.

Download or read book Bio inspired Flying Robots written by Jean-Christophe Zufferey and published by EPFL Press. This book was released on 2008-04-24 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates how bio-inspiration can lead to fully autonomous flying robots without relying on external aids. Most existing aerial robots fly in open skies, far from obstacles, and rely on external beacons, mainly GPS, to localise and navigate. However, these robots are not able to fly at low altitude or in confined environments, and yet this poses absolutely no difficulty to insects. Indeed, flying insects display efficient flight control capabilities in complex environments despite their limited weight and relatively tiny brain size. From sensor suite to control strategies, the literature on flying insects is reviewed from an engineering perspective in order to extract useful principles that are then applied to the synthesis of artificial indoor flyers. Artificial evolution is also utilised to search for alternative control systems and behaviors that match the constraints of small flying robots. Specifically, the basic sensory modalities of insects, vision, gyroscopes and airflow sense, are applied to develop navigation controllers for indoor flying robots. These robots are capable of mapping sensor information onto actuator commands in real time to maintain altitude, stabilize the course and avoid obstacles. The most prominent result of this novel approach is a 10-gram microflyer capable of fully autonomous operation in an office-sized room using fly-inspired vision, inertial and airspeed sensors. This book is intended for all those interested in autonomous robotics, in academia and industry.

Download or read book Flight Formation Control written by Josep M. Guerrero and published by John Wiley & Sons. This book was released on 2012-12-17 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade the development and control of Unmanned Aerial Vehicles (UAVs) has attracted a lot of interest. Both researchers and companies have a growing interest in improving this type of vehicle given their many civilian and military applications. This book presents the state of the art in the area of UAV Flight Formation. The coordination and robust consensus approaches are presented in detail as well as formation flight control strategies which are validated in experimental platforms. It aims at helping students and academics alike to better understand what coordination and flight formation control can make possible. Several novel methods are presented: - controllability and observability of multi-agent systems; - robust consensus; - flight formation control; - stability of formations over noisy networks; which generate solutions of guaranteed performance for UAV Flight Formation. Contents 1. Introduction, J.A. Guerrero. 2. Theoretical Preliminaries, J.A. Guerrero. 3. Multiagent Coordination Strategies, J.A. Guerrero, R. Lozano, M.W. Spong, N. Chopra. 4. Robust Control Design for Multiagent Systems with Parametric Uncertainty, J.A. Guerrero, G. Romero. 5. On Adaptive and Robust Controlled Synchronization of Networked Robotic Systems on Strongly Connected Graphs, Y.-C. Liu, N. Chopra. 6. Modeling and Control of Mini UAV, G. Flores Colunga, J.A. Guerrero, J. Escareño, R. Lozano. 7. Flight Formation Control Strategies for Mini UAVs, J.A. Guerrero. 8. Formation Based on Potential Functions, L. García, A. Dzul. 9. Quadrotor Vision-Based Control, J.E. Gomez-Balderas, J.A. Guerrero, S. SALAZAR, R. Lozano, P. Castillo. 10. Toward Vision-Based Coordination of Quadrotor Platoons, L.R. García Carrillo, J.A. Guerrero, R. Lozano. 11. Optimal Guidance for Rotorcraft Platoon Formation Flying in Wind Fields, J.A. Guerrero, Y. Bestaoui, R. Lozano. 12. Impact of Wireless Medium Access Protocol on the Quadrotor Formation Control, J.A. Guerrero, Y. Challal, P. Castillo. 13. MAC Protocol for Wireless Communications, A. Mendez, M. Panduro, O. Elizarraras, D. Covarrubias. 14. Optimization of a Scannable Pattern for Bidimensional Antenna Arrays to Provide Maximum Performance, A. Reyna, M.A. Panduro, A. Mendez.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flying Insects and Robots written by Dario Floreano and published by Springer. This book was released on 2014-11-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flying insects are intelligent micromachines capable of exquisite maneuvers in unpredictable environments. Understanding these systems advances our knowledge of flight control, sensor suites, and unsteady aerodynamics, which is of crucial interest to engineers developing intelligent flying robots or micro air vehicles (MAVs). The insights we gain when synthesizing bioinspired systems can in turn benefit the fields of neurophysiology, ethology and zoology by providing real-life tests of the proposed models. This book was written by biologists and engineers leading the research in this crossdisciplinary field. It examines all aspects of the mechanics, technology and intelligence of insects and insectoids. After introductory-level overviews of flight control in insects, dedicated chapters focus on the development of autonomous flying systems using biological principles to sense their surroundings and autonomously navigate. A significant part of the book is dedicated to the mechanics and control of flapping wings both in insects and artificial systems. Finally hybrid locomotion, energy harvesting and manufacturing of small flying robots are covered. A particular feature of the book is the depth on realization topics such as control engineering, electronics, mechanics, optics, robotics and manufacturing. This book will be of interest to academic and industrial researchers engaged with theory and engineering in the domains of aerial robotics, artificial intelligence, and entomology.

Download or read book Autonomous Robots written by Farbod Fahimi and published by Springer Science & Business Media. This book was released on 2008-10-25 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is at least two decades since the conventional robotic manipulators have become a common manufacturing tool for different industries, from automotive to pharmaceutical. The proven benefits of utilizing robotic manipulators for manufacturing in different industries motivated scientists and researchers to try to extend the applications of robots to many other areas by inventing several new types of robots other than conventional manipulators. The new types of robots can be categorized in two groups; redundant (and hyper-redundant) manipulators, and mobile (ground, marine, and aerial) robots. These groups of robots, known as advanced robots, have more freedom for their mobility, which allows them to do tasks that the conventional manipulators cannot do. Engineers have taken advantage of the extra mobility of the advanced robots to make them work in constrained environments, ranging from limited joint motions for redundant (or hyper-redundant) manipulators to obstacles in the way of mobile (ground, marine, and aerial) robots. Since these constraints usually depend on the work environment, they are variable. Engineers have had to invent methods to allow the robots to deal with a variety of constraints automatically. A robot that is equipped with those methods is called an Autonomous Robot. Autonomous Robots: Kinematics, Path Planning, and Control covers the kinematics and dynamic modeling/analysis of Autonomous Robots, as well as the methods suitable for their control. The text is suitable for mechanical and electrical engineers who want to familiarize themselves with methods of modeling/analysis/control that have been proven efficient through research.

Download or read book A First Course in Aerial Robots and Drones written by Yasmina Bestaoui Sebbane and published by CRC Press. This book was released on 2022-02-23 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: A First Course in Aerial Robots and Drones provides an accessible and student friendly introduction to aerial robots and drones. Drones figure prominently as opportunities for students to learn various aspects of aerospace engineering and design. Drones offer an enticing entry point for STEM studies. As the use of drones in STEM studies grows, there is an emerging generation of drone pilots who are not just good at flying, but experts in specific niches, such as mapping or thermography. Key Features: Focuses on algorithms that are currently used to solve diverse problems. Enables students to solve problems and improve their science skills. Introduces difficult concepts with simple, accessible examples. Suitable for undergraduate students, this textbook provides students and other readers with methods for solving problems and improving their science skills.

Download or read book Advances in Motion Sensing and Control for Robotic Applications written by Farrokh Janabi-Sharifi and published by Springer. This book was released on 2019-06-15 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on advances in sensing, modeling and control methods for different robotic platforms such as multi-degree of freedom robotic arms, unmanned aerial vehicles and autonomous mobile platforms. Based on 2018 Symposium on Mechatronics, Robotics, and Control (SMTRC’18), held as part of the 2018 CSME International Congress, in York University, Toronto, Canada, the book covers a variety of topics, from filtering and state estimation to adaptive control of reconfigurable robots and more. Next-generation systems with advanced control, planning, perception and interaction capabilities will achieve functionalities far beyond today’s technology. Two key challenges remaining for advanced robot technologies are related to sensing and control in robotic systems. Advanced perception is needed to navigate changing environments. Adaptive and intelligent control systems must be developed to enable operation in unstructured and dynamic environments. The selected chapters in this book focus on both of the aforementioned areas and highlight the main trends and challenges in robot sensing and control. The first part of the book introduces chapters which focus on advanced perception and sensing for robotics applications. They include sensor filtering and state estimation for bipedal robots and motion capture systems analysis. The second part focuses on different modeling and control methods for robotic systems including flight control for UAVs, multi-variable robust control for modular and reconfigurable robotics and control for precision micromanipulation.

Download or read book Multicopter Design and Control Practice written by Quan Quan and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the sister book to "Introduction to Multicopter Design and Control," published by Springer in 2017, this book focuses on using a practical process to help readers to deepen their understanding of multicopter design and control. Novel tools with tutorials on multicopters are presented, which can help readers move from theory to practice. Experiments presented in this book employ: (1) The most widely-used flight platform - multicopters - as a flight platform; (2) The most widely-used flight pilot hardware - Pixhawk - as a control platform; and (3) One of the most widely-used programming languages in the field of control engi-neering - MATLAB + Simulink - as a programming language. Based on the current advanced development concept Model-Based Design (MBD)process, the three aspects mentioned above are closely linked. Each experiment is implemented in MATLAB and Simulink, and the numerical simula-tion test is carried out on a built simulation platform. Readers can upload the controller to the Pixhawk autopilot using automatic code generation technology and form a closed loop with a given real-time simulator for Hardware-In-the-Loop (HIL) testing. After that, the actual flight with the Pixhawk autopilot can be performed. This is by far the most complete and clear guide to modern drone fundamentals I've seen.It covers every element of these advanced aerial robots and walks through examples and tutorials based on the industry's leading open-source software and tools. Read this book, and you'll be well prepared to work at the leading edge of this exciting new industry. Chris Anderson, CEO 3DR and Chairman, the Linux Foundation's Dronecode Project The development of a multicopter and its applications is very challenging in the robotics area due to the multidomain knowledge involved. This book systematically addresses the design, simulation and implementation of multicopters with the industrial leading workflow - Model-Based Design, commonly used in the automotive and aero-defense industries. With this book, researchers and engineers can seamlessly apply the concepts, workflows, and tools in other engineering areas, especially robot design and robotics ap-plication development. Dr. Yanliang Zhang, Founder of Weston Robot, EX-product Manager of Robotics System Toolbox at the MathWorks.

Download or read book Robot Modeling and Control written by Mark W. Spong and published by John Wiley & Sons. This book was released on 2020-02-07 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: A New Edition Featuring Case Studies and Examples of the Fundamentals of Robot Kinematics, Dynamics, and Control In the 2nd Edition of Robot Modeling and Control, students will cover the theoretical fundamentals and the latest technological advances in robot kinematics. With so much advancement in technology, from robotics to motion planning, society can implement more powerful and dynamic algorithms than ever before. This in-depth reference guide educates readers in four distinct parts; the first two serve as a guide to the fundamentals of robotics and motion control, while the last two dive more in-depth into control theory and nonlinear system analysis. With the new edition, readers gain access to new case studies and thoroughly researched information covering topics such as: ● Motion-planning, collision avoidance, trajectory optimization, and control of robots ● Popular topics within the robotics industry and how they apply to various technologies ● An expanded set of examples, simulations, problems, and case studies ● Open-ended suggestions for students to apply the knowledge to real-life situations A four-part reference essential for both undergraduate and graduate students, Robot Modeling and Control serves as a foundation for a solid education in robotics and motion planning.

Download or read book Robust Tracking Control of Robot Manipulators written by Zhihua Qu and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the latest research in the field, Robust Tracking Control of Robot Manipulators is the first book to provide systematic methods for stabilizing unwanted flexible, uncertain, and unmodeled dynamics. The authors present a thorough comparison of state-of-the-art and classical designs of all controls: linear or nonlinear (simple or complicated), conventional or robust, adaptive or learning. Focusing on control design and performance analysis, this book will help you to apply advanced controls effectively and to establish equivalent and different robustness. This book will be invaluable as a guide to researchers and practicing engineers in the field of robot control, automation, and robotic engineering. It will also serve as a useful reference for control of robot manipulators and mechanical-electrical systems.

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autonomous Flying Robots written by Kenzo Nonami and published by Springer Science & Business Media. This book was released on 2010-09-15 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advance in robotics has boosted the application of autonomous vehicles to perform tedious and risky tasks or to be cost-effective substitutes for their - man counterparts. Based on their working environment, a rough classi cation of the autonomous vehicles would include unmanned aerial vehicles (UAVs), - manned ground vehicles (UGVs), autonomous underwater vehicles (AUVs), and autonomous surface vehicles (ASVs). UAVs, UGVs, AUVs, and ASVs are called UVs (unmanned vehicles) nowadays. In recent decades, the development of - manned autonomous vehicles have been of great interest, and different kinds of autonomous vehicles have been studied and developed all over the world. In part- ular, UAVs have many applications in emergency situations; humans often cannot come close to a dangerous natural disaster such as an earthquake, a ood, an active volcano, or a nuclear disaster. Since the development of the rst UAVs, research efforts have been focused on military applications. Recently, however, demand has arisen for UAVs such as aero-robotsand ying robotsthat can be used in emergency situations and in industrial applications. Among the wide variety of UAVs that have been developed, small-scale HUAVs (helicopter-based UAVs) have the ability to take off and land vertically as well as the ability to cruise in ight, but their most importantcapability is hovering. Hoveringat a point enables us to make more eff- tive observations of a target. Furthermore, small-scale HUAVs offer the advantages of low cost and easy operation.

Download or read book Handbook of Smart Energy Systems written by Michel Fathi and published by Springer Nature. This book was released on 2023-08-04 with total page 3382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook analyzes and develops methods and models to optimize solutions for energy access (for industry and the general world population alike) in terms of reliability and sustainability. With a focus on improving the performance of energy systems, it brings together state-of-the-art research on reliability enhancement, intelligent development, simulation and optimization, as well as sustainable development of energy systems. It helps energy stakeholders and professionals learn the methodologies needed to improve the reliability of energy supply-and-demand systems, achieve more efficient long-term operations, deal with uncertainties in energy systems, and reduce energy emissions. Highlighting novel models and their applications from leading experts in this important area, this book will appeal to researchers, students, and engineers in the various domains of smart energy systems and encourage them to pursue research and development in this exciting and highly relevant field.