Download or read book Model and Design of Improved Current Mode Logic Gates written by Kirti Gupta and published by Springer Nature. This book was released on 2019-11-22 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents MOSFET-based current mode logic (CML) topologies, which increase the speed, and lower the transistor count, supply voltage and power consumption. The improved topologies modify the conventional PDN, load, and the current source sections of the basic CML gates. Electronic system implementation involves embedding digital and analog circuits on a single die shifting towards mixed-mode circuit design. The high-resolution, low-power and low-voltage analog circuits are combined with high-frequency complex digital circuits, and the conventional static CMOS logic generates large current spikes during the switching (also referred to as digital switching noise), which degrade the resolution of the sensitive analog circuits via supply line and substrate coupling. This problem is exacerbated further with scaling down of CMOS technology due to higher integration levels and operating frequencies. In the literature, several methods are described to reduce the propagation of the digital switching noise. However, in high-resolution applications, these methods are not sufficient. The conventional CMOS static logic is no longer an effective solution, and therefore an alternative with reduced current spikes or that draws a constant supply current must be selected. The current mode logic (CML) topology, with its unique property of requiring constant supply current, is a promising alternative to the conventional CMOS static logic.

Download or read book Model and Design of Bipolar and MOS Current Mode Logic written by Massimo Alioto and published by Springer Science & Business Media. This book was released on 2006-01-25 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current-Mode digital circuits have been extensively analyzed and used since the early days of digital ICs. In particular, bipolar Current-Mode digital circuits emerged as an approach to realize digital circuits with the highest speed. Together with its speed performance, CMOS Current-Mode logic has been rediscovered to allow logic gates implementations which, in contrast to classical VLSI CMOS digital circuits, have the feature of low noise level generation. Thus, CMOS Current-Mode gates can be efficiently used inside analog and mixed-signal ICs, which require a low noise silicon environment. For these reasons, until today, many works and results have been published which reinforce the importance of Current-Mode digital circuits. In the topic of Current-Mode digital circuits, the authors spent a lot of effort in the last six years, and their original results highly enhanced both the modeling and the related design methodologies. Since the fundamental Current-Mode logic building block is the classical differential amplifier, the winning idea, that represents the starting point of the authors’ research, was to change the classical point of view typically followed in the investigation and design of Current-Mode digital circuits. In particular, they properly exploited classical paradigms developed and used in the analog circuit domain (a topic in which one of the authors maturated a great experience).

Download or read book Proceedings of Fourth International Conference on Communication Computing and Electronics Systems written by V. Bindhu and published by Springer Nature. This book was released on 2023-03-14 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes high-quality research papers presented at the Fourth International Conference on Communication, Computing and Electronics Systems (ICCCES 2022), held at the PPG Institute of Technology, Coimbatore, India, on September 15–16, 2022. The book focuses mainly on the research trends in cloud computing, mobile computing, artificial intelligence and advanced electronics systems. The topics covered are automation, VLSI, embedded systems, optical communication, RF communication, microwave engineering, artificial intelligence, deep learning, pattern recognition, communication networks, Internet of things, cyber-physical systems and healthcare informatics.

Download or read book Design Automation for Differential MOS Current Mode Logic Circuits written by Stéphane Badel and published by Springer. This book was released on 2018-07-02 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the implementation of digital circuits by using MCML gates. Although digital circuit implementation is possible with other elements, such as CMOS gates, MCML implementations can provide superior performance in certain applications. This book provides a complete automation methodology for the implementation of digital circuits in MCML and provides an extensive explanation on the technical details of design of MCML. A systematic methodology is presented to build efficient MCML standard-cell libraries, and a complete top-down design flow is shown to implement complex systems using such building blocks.

Download or read book Applications in Electronics Pervading Industry Environment and Society written by Sergio Saponara and published by MDPI. This book was released on 2021-06-04 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features the manuscripts accepted for the Special Issue “Applications in Electronics Pervading Industry, Environment and Society—Sensing Systems and Pervasive Intelligence” of the MDPI journal Sensors. Most of the papers come from a selection of the best papers of the 2019 edition of the “Applications in Electronics Pervading Industry, Environment and Society” (APPLEPIES) Conference, which was held in November 2019. All these papers have been significantly enhanced with novel experimental results. The papers give an overview of the trends in research and development activities concerning the pervasive application of electronics in industry, the environment, and society. The focus of these papers is on cyber physical systems (CPS), with research proposals for new sensor acquisition and ADC (analog to digital converter) methods, high-speed communication systems, cybersecurity, big data management, and data processing including emerging machine learning techniques. Physical implementation aspects are discussed as well as the trade-off found between functional performance and hardware/system costs.

Download or read book Dual Mode Logic written by Itamar Levi and published by Springer Nature. This book was released on 2020-12-15 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents Dual Mode Logic (DML), a new design paradigm for digital integrated circuits. DML logic gates can operate in two modes, each optimized for a different metric. Its on-the-fly switching between these operational modes at the gate, block and system levels provide maximal E-D optimization flexibility. Each highly detailed chapter has multiple illustrations showing how the DML paradigm seamlessly implements digital circuits that dissipate less energy while simultaneously improving performance and reducing area without a significant compromise in reliability. All the facets of the DML methodology are covered, starting from basic concepts, through single gate optimization, general module optimization, design trade-offs and new ways DML can be integrated into standard design flows using standard EDA tools. DML logic is compatible with numerous applications but is particularly advantageous for ultra-low power, reliable high performance systems, and advanced scaled technologies Written in language accessible to students and design engineers, each topic is oriented toward immediate application by all those interested in an alternative to CMOS logic. Describes a novel, promising alternative to conventional CMOS logic, known as Dual Mode Logic (DML), with which a single gate can be operated selectively in two modes, each optimized for a different metric (e.g., energy consumption, performance, size); Demonstrates several techniques at the architectural level, which can result in high energy savings and improved system performance; Focuses on the tradeoffs between power, area and speed including optimizations at the transistor and gate level, including alternatives to DML basic cells; Illustrates DML efficiency for a variety of VLSI applications.

Download or read book High Speed Optical Transceivers written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Beyond CMOS Technologies for Next Generation Computer Design written by Rasit O. Topaloglu and published by Springer. This book was released on 2018-08-20 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the bottleneck faced soon by designers of traditional CMOS devices, due to device scaling, power and energy consumption, and variability limitations. This book aims at bridging the gap between device technology and architecture/system design. Readers will learn about challenges and opportunities presented by “beyond-CMOS devices” and gain insight into how these might be leveraged to build energy-efficient electronic systems.

Download or read book Recent Trends in Communication and Electronics written by Sanjay Sharma and published by CRC Press. This book was released on 2021-06-30 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Department of Electronics and Communication Engineering of KIET Group of Institutions, Delhi-NCR organized the 4th International Conference ICCE-2020 during November 28-29, 2020. Information compiled in this book is based on the 114 research papers of excellent quality covering different domains of Electronics and Communication Engineering, Computer Science Engineering, Information Technology, Electrical Engineering, Electronics and Instrumentation Engineering. The subject areas treated in the book are: Satellite, Radar and Microwave Techniques, Secure, Smart, and Reliable Networks, Next Generation Networks, Devices & Circuits, Signal & Image Processing, New Emerging Technologies, having the central focus on Recent Trends in Communication & Electronics (ICCE-2020). In addition, a few themes based on Special Sessions have also been conducted in ICCE-2020. The objective of the book resulting from the 4th International Conference on Recent Trends in Communication & Electronics (ICCE-2020) is to provide a resource for the study and research work for an interested audience comprising of researchers, students, audience, and practitioners in the areas of Communications & Computing Systems.

Download or read book Proceedings of International Conference on Communication Circuits and Systems written by Sukanta Kumar Sabut and published by Springer Nature. This book was released on 2021-04-02 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book proposes new technologies and discusses innovative solutions to various problems in the field of communication, circuits, and systems, as reflected in high-quality papers presented at International Conference on Communication, Circuits, and Systems (IC3S 2020) held at KIIT, Bhubaneswar, India from 16 – 18 October 2020. It brings together new works from academicians, scientists, industry professionals, scholars, and students together to exchange research outcomes and open up new horizons in the areas of signal processing, communications, and devices.

Download or read book Operational Amplifier Speed and Accuracy Improvement written by Vadim V. Ivanov and published by Springer Science & Business Media. This book was released on 2005-12-30 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operational Amplifier Speed and Accuracy Improvement proposes a new methodology for the design of analog integrated circuits. The usefulness of this methodology is demonstrated through the design of an operational amplifier. This methodology consists of the following iterative steps: description of the circuit functionality at a high level of abstraction using signal flow graphs; equivalent transformations and modifications of the graph to the form where all important parameters are controlled by dedicated feedback loops; and implementation of the structure using a library of elementary cells. Operational Amplifier Speed and Accuracy Improvement shows how to choose structures and design circuits which improve an operational amplifier's important parameters such as speed to power ratio, open loop gain, common-mode voltage rejection ratio, and power supply rejection ratio. The same approach is used to design clamps and limiting circuits which improve the performance of the amplifier outside of its linear operating region, such as slew rate enhancement, output short circuit current limitation, and input overload recovery.

Download or read book Integrated Circuit and System Design Power and Timing Modeling Optimization and Simulation written by Jorge Juan Chico and published by Springer Science & Business Media. This book was released on 2003-09-03 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 13th International Workshop on Power and Timing Modeling, Optimization and Simulation, PATMOS 2003, held in Torino, Italy in September 2003. The 43 revised full papers and 18 revised poster papers presented together with three keynote contributions were carefully reviewed and selected from 85 submissions. The papers are organized in topical sections on gate-level modeling and characterization, interconnect modeling and optimization, asynchronous techniques, RTL power modeling and memory optimization, high-level modeling, power-efficient technologies and designs, communication modeling and design, and low-power issues in processors and multimedia.

Download or read book Extreme Low Power Mixed Signal IC Design written by Armin Tajalli and published by Springer Science & Business Media. This book was released on 2010-09-14 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design exibility and power consumption in addition to the cost, have always been the most important issues in design of integrated circuits (ICs), and are the main concerns of this research, as well. Energy Consumptions: Power dissipation (P ) and energy consumption are - diss pecially importantwhen there is a limited amountof power budgetor limited source of energy. Very common examples are portable systems where the battery life time depends on system power consumption. Many different techniques have been - veloped to reduce or manage the circuit power consumption in this type of systems. Ultra-low power (ULP) applications are another examples where power dissipation is the primary design issue. In such applications, the power budget is so restricted that very special circuit and system level design techniquesare needed to satisfy the requirements. Circuits employed in applications such as wireless sensor networks (WSN), wearable battery powered systems [1], and implantable circuits for biol- ical applications need to consume very low amount of power such that the entire system can survive for a very long time without the need for changingor recharging battery[2–4]. Using newpowersupplytechniquessuchas energyharvesting[5]and printable batteries [6], is another reason for reducing power dissipation. Devel- ing special design techniques for implementing low power circuits [7–9], as well as dynamic power management (DPM) schemes [10] are the two main approaches to control the system power consumption. Design Flexibility: Design exibility is the other important issue in modern in- grated systems.

Download or read book Integrated Circuit and System Design Power and Timing Modeling Optimization and Simulation written by Vassilis Paliouras and published by Springer. This book was released on 2005-08-25 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welcome to the proceedings of PATMOS 2005, the 15th in a series of international workshops.PATMOS2005wasorganizedbyIMECwithtechnicalco-sponsorshipfrom the IEEE Circuits and Systems Society. Over the years, PATMOS has evolved into an important European event, where - searchers from both industry and academia discuss and investigate the emerging ch- lenges in future and contemporary applications, design methodologies, and tools - quired for the developmentof upcominggenerationsof integrated circuits and systems. The technical program of PATMOS 2005 contained state-of-the-art technical contri- tions, three invited talks, a special session on hearing-aid design, and an embedded - torial. The technical program focused on timing, performance and power consumption, as well as architectural aspects with particular emphasis on modeling, design, char- terization, analysis and optimization in the nanometer era. The Technical Program Committee, with the assistance of additional expert revi- ers, selected the 74 papers to be presented at PATMOS. The papers were divided into 11 technical sessions and 3 poster sessions. As is always the case with the PATMOS workshops, the review process was anonymous, full papers were required, and several reviews were carried out per paper. Beyond the presentations of the papers, the PATMOS technical program was - riched by a series of speeches offered by world class experts, on important emerging research issues of industrial relevance. Prof. Jan Rabaey, Berkeley, USA, gave a talk on “Traveling the Wild Frontier of Ulta Low-Power Design”, Dr. Sung Bae Park, S- sung, gave a presentation on “DVL (Deep Low Voltage): Circuits and Devices”, Prof.

Download or read book Proceedings of International Conference on ICT for Sustainable Development written by Suresh Chandra Satapathy and published by Springer. This book was released on 2016-02-25 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volumes of this book collect high-quality peer-reviewed research papers presented in the International Conference on ICT for Sustainable Development (ICT4SD 2015) held at Ahmedabad, India during 3 – 4 July 2015. The book discusses all areas of Information and Communication Technologies and its applications in field for engineering and management. The main focus of the volumes are on applications of ICT for Infrastructure, e-Governance, and contemporary technologies advancements on Data Mining, Security, Computer Graphics, etc. The objective of this International Conference is to provide an opportunity for the researchers, academicians, industry persons and students to interact and exchange ideas, experience and expertise in the current trend and strategies for Information and Communication Technologies.

Download or read book Emerging Non Volatile Memories written by Seungbum Hong and published by Springer. This book was released on 2014-11-18 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the fundamentals of emerging non-volatile memories and provides an overview of future trends in the field. Readers will find coverage of seven important memory technologies, including Ferroelectric Random Access Memory (FeRAM), Ferromagnetic RAM (FMRAM), Multiferroic RAM (MFRAM), Phase-Change Memories (PCM), Oxide-based Resistive RAM (RRAM), Probe Storage, and Polymer Memories. Chapters are structured to reflect diffusions and clashes between different topics. Emerging Non-Volatile Memories is an ideal book for graduate students, faculty, and professionals working in the area of non-volatile memory. This book also: Covers key memory technologies, including Ferroelectric Random Access Memory (FeRAM), Ferromagnetic RAM (FMRAM), and Multiferroic RAM (MFRAM), among others. Provides an overview of non-volatile memory fundamentals. Broadens readers’ understanding of future trends in non-volatile memories.

Download or read book Field Programmable Logic and Applications written by Gordon Brebner and published by Springer Science & Business Media. This book was released on 2001-08-15 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 11th International Conference on Field-Programmable Logic and Application, FPL 2001, held in Belfast, Northern Ireland, UK, in August 2001. The 56 revised full papers and 15 short papers presented were carefully reviewed and selected from a total of 117 submissions. The book offers topical sections on architectural framework, place and route, architecture, DSP, synthesis, encryption, runtime reconfiguration, graphics and vision, networking, processor interaction, applications, methodology, loops and systolic, image processing, faults, and arithmetic.