Download or read book Mixture Preparation in a SI Engine with Port Fuel Injection During Starting and Warm up written by J. W. Fox and published by . This book was released on 1992 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Automotive Spark Ignited Direct Injection Gasoline Engines written by F. Zhao and published by Elsevier. This book was released on 2000-02-08 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of fuel injection, spray atomization and vaporization, charge cooling, mixture preparation and the control of in-cylinder air motion are all being actively researched and this work is reviewed in detail and analyzed. The new technologies such as high-pressure, common-rail, gasoline injection systems and swirl-atomizing gasoline fuel injections are discussed in detail, as these technologies, along with computer control capabilities, have enabled the current new examination of an old objective; the direct-injection, stratified-charge (DISC), gasoline engine. The prior work on DISC engines that is relevant to current GDI engine development is also reviewed and discussed. The fuel economy and emission data for actual engine configurations have been obtained and assembled for all of the available GDI literature, and are reviewed and discussed in detail. The types of GDI engines are arranged in four classifications of decreasing complexity, and the advantages and disadvantages of each class are noted and explained. Emphasis is placed upon consensus trends and conclusions that are evident when taken as a whole; thus the GDI researcher is informed regarding the degree to which engine volumetric efficiency and compression ratio can be increased under optimized conditions, and as to the extent to which unburned hydrocarbon (UBHC), NOx and particulate emissions can be minimized for specific combustion strategies. The critical area of GDI fuel injector deposits and the associated effect on spray geometry and engine performance degradation are reviewed, and important system guidelines for minimizing deposition rates and deposit effects are presented. The capabilities and limitations of emission control techniques and after treatment hardware are reviewed in depth, and a compilation and discussion of areas of consensus on attaining European, Japanese and North American emission standards presented. All known research, prototype and production GDI engines worldwide are reviewed as to performance, emissions and fuel economy advantages, and for areas requiring further development. The engine schematics, control diagrams and specifications are compiled, and the emission control strategies are illustrated and discussed. The influence of lean-NOx catalysts on the development of late-injection, stratified-charge GDI engines is reviewed, and the relative merits of lean-burn, homogeneous, direct-injection engines as an option requiring less control complexity are analyzed.

Download or read book Mixture Preparation Behavior in Port Fuel Injected Spark Ignition Engines During Transient Operation written by Jim Scot Cowart and published by . This book was released on 2000 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Developments in Ultra Clean Gasoline Powered Vehicles written by Fuquan Zhao and published by SAE International. This book was released on 2004-03-08 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last several years, significant efforts have been directed toward the development of ultra-clean, gasoline-powered vehicles in the automotive industry. With the coming of increasingly stringent emissions legislation, this development is more critical now than ever before. This has lead to an increase in the technical information available. Advanced Developments in Ultra-Clean Gasoline-Powered Vehicles provides the reader with technical information including a description of fundamental processes, insight on technical issues, key trends, and future R&D directions.

Download or read book Emission Control and Fuel Economy written by John H Johnson and published by SAE International. This book was released on 2005-06-27 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emission and fuel economy regulations and standards are compelling manufacturers to build ultra-low emission vehicles. As a result, engineers must develop spark-ignition engines with integrated emission control systems that use reformulated low-sulfur fuel. Emission Control and Fuel Economy for Port and Direct Injected SI Engines is a collection of SAE technical papers that covers the fundamentals of gasoline direct injection (DI) engine emissions and fuel economy, design variable effects on HC emissions, and advanced emission control technology and modeling approaches. All papers contained in this book were selected by an accomplished expert as the best in the field; reprinted in their entirety, they present a pathway to integrated emission control systems that meet 2004-2009 EPA standards for light-duty vehicles.

Download or read book Design of Racing and High Performance Engines 1998 2003 written by Daniel J Holt and published by SAE International. This book was released on 2003-08-05 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 53 technical papers in this book show the improvements and design techniques that researchers have applied to performance and racing engines. They provide an insight into what the engineers consider to be the top improvements needed to advance engine technology; and cover subjects such as: 1) Direct injection; 2) Valve spring advancements; 3) Turbocharging; 4) Variable valve control; 5) Combustion evaluation; and 5) New racing engines.

Download or read book Engine Combustion Instrumentation and Diagnostics written by Hua Zhao and published by SAE International. This book was released on 2001-01-30 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete description of instrumentation and in-cylinder measurement techniques for internal combustion engines. Written primarily for researchers and engineers involved in advanced research and development of internal combustion engines, the book provides an introduction to the instrumentation and experimental techniques, with particular emphasis on diagnostic techniques for in-cylinder measurements.

Download or read book A Visualization Study of Mixture Preparation Mechanisms for Port Fuel Injected Spark Ignition Engines written by Vincent Stanley Costanzo and published by . This book was released on 2004 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: An experimental study was carried out that examined qualitatively the mixture preparation process in port fuel injected spark ignition engines. The primary variables in this study were intake valve lift, intake valve timing, injector spray quality, and injection timing. A special visualization engine was used to enable high-speed video of the fuel-air mixture flowing through the intake valve, as well as the wetting of the intake valve and head in the combustion chamber. Additionally, video was taken from within the intake port using a borescope to examine liquid fuel distribution in the port. Finally, a simulation study was carried out in order to understand how the various combinations of intake valve lifts and timings affect the flow velocity through the valve gap to aid in the interpretation of the videos. The net result of the study was the construction of an "event diagram" for each experimental condition that identifies and explains the sequence of events and interactions affecting the liquid fuel. Six mechanisms that transport liquid fuel into the combustion chamber and five that affect liquid fuel within the combustion chamber were identified.

Download or read book Mixture Formation in Spark Ignition Engines written by Hans Peter Lenz and published by Springer. This book was released on 2013-11-11 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twentyfour years have gone by since the publication of K. Lohner and H. Muller's comprehen sive work "Gemischbildung und Verbrennung im Ottomotor" in 1967 [1.1]' Naturally, the field of mixture formation and combustion in the spark-ignition engine has wit nessed great technological advances and many new findings in the intervening years, so that the time seemed ripe for presenting a summary of recent research and developments. There fore, I gladly took up the suggestion of the editors of this series of books, Professor Dr. H. List and Professor Dr. A. Pischinger, to write a book summarizing the present state of the art. A center of activity of the Institute of Internal-Combustion Engines and Automotive Engineering at the Vienna Technical University, which I am heading, is the field of mixture formation -there fore, many new results that have been achieved in this area in collaboration with the respective industry have been included in this volume. The basic principles of combustion are discussed only to that extent which seemect necessary for an understanding of the effects of mixture formation. The focal point of this volume is the mixture formation in spark-ignition engines, covering both the theory and actual design of the mixture formation units and appropriate intake manifolds. Also, the related measurement technology is explained in this work.

Download or read book Handbook of Air Pollution from Internal Combustion Engines written by Eran Sher and published by Academic Press. This book was released on 1998-03-20 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an important and valuable source for engineers and researchers in the area of internal combustion engines pollution control. It provides an excellent updated review of available knowledge in this field and furnishes essential and useful information on air pollution constituents, mechanisms of formation, control technologies, effects of engine design, effects of operation conditions, and effects of fuel formulation and additives. The text is rich in explanatory diagrams, figures and tables, and includes a considerable number of references. An important resource for engineers and researchers in the area of internal combustion engines and pollution control Presents and excellent updated review of the available knowledge in this area Written by 23 experts Provides over 700 references and more than 500 explanatory diagrams, figures and tables

Download or read book Automotive Fuels Reference Book Fourth Edition written by Paul Richards and published by SAE International. This book was released on 2023-11-15 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: The earlier editions of this title have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited latest edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful, This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources, including e-fuels. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. As CO2 is now an important emission there is also discussion regarding low and non-carbon fuels and how they might be used. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures. (ISBN 9781468605785, ISBN 9781468605792, ISBN 9781468605808, DOI 10.4271/9781468605792)

Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.

Download or read book Simulation and Optimization of Internal Combustion Engines written by Zhiyu Han and published by SAE International. This book was released on 2021-12-28 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation and Optimization of Internal Combustion Engines provides the fundamentals and up-to-date progress in multidimensional simulation and optimization of internal combustion engines. While it is impossible to include all the models in a single book, this book intends to introduce the pioneer and/or the often-used models and the physics behind them providing readers with ready-to-use knowledge. Key issues, useful modeling methodology and techniques, as well as instructive results, are discussed through examples. Readers will understand the fundamentals of these examples and be inspired to explore new ideas and means for better solutions in their studies and work. Topics include combustion basis of IC engines, mathematical descriptions of reactive flow with sprays, engine in-cylinder turbulence, fuel sprays, combustions and pollutant emissions, optimization of direct-injection gasoline engines, and optimization of diesel and alternative fuel engines.

Download or read book Toyota Technical Review written by Toyota Jidōsha Kōgyō Kabushiki Kaisha and published by . This book was released on 1995 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Literature Abstracts written by Society of Automotive Engineers and published by . This book was released on 2000 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Liquid Fuel Behavior in the Mixture Preparation Process During Starting and Warm up in a Spark Ignition Engine written by Younggy Shin and published by . This book was released on 1996 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the Fall Technical Conference of the ASME Internal Combustion Engine Division written by American Society of Mechanical Engineers. Internal Combustion Engine Division. Technical Conference and published by . This book was released on 2007 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: