Download or read book Transport Processes and Separation Process Principles includes Unit Operations written by Christie John Geankoplis and published by . This book was released on 2013-07-25 with total page 982 pages. Available in PDF, EPUB and Kindle. Book excerpt: Appropriate for one-year transport phenomena (also called transport processes) and separation processes course. First semester covers fluid mechanics, heat and mass transfer; second semester covers separation process principles (includes unit operations). The title of this Fourth Edition has been changed from Transport Processes and Unit Operations to Transport Processes and Separation Process Principles (Includes Unit Operations). This was done because the term Unit Operations has been largely superseded by the term Separation Processes which better reflects the present modern nomenclature being used. The main objectives and the format of the Fourth Edition remain the same. The sections on momentum transfer have been greatly expanded, especially in the sections on fluidized beds, flow meters, mixing, and non-Newtonian fluids. Material has been added to the chapter on mass transfer. The chapters on absorption, distillation, and liquid-liquid extraction have also been enlarged. More new material has been added to the sections on ion exchange and crystallization. The chapter on membrane separation processes has been greatly expanded especially for gas-membrane theory.
Download or read book Mixing of Liquids by Mechanical Agitation written by Jaromír J. Ulbrecht and published by Taylor & Francis. This book was released on 1985 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1985. Routledge is an imprint of Taylor & Francis, an informa company.
Download or read book Handbook of Industrial Mixing written by Edward L. Paul and published by John Wiley & Sons. This book was released on 2004-02-17 with total page 1450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Industrial Mixing will explain the difference and uses of a variety of mixers including gear mixers, top entry mixers, side entry mixers, bottom entry mixers, on-line mixers, and submerged mixers The Handbook discusses the trade-offs among various mixers, concentrating on which might be considered for a particular process. Handbook of Industrial Mixing explains industrial mixers in a clear concise manner, and also: * Contains a CD-ROM with video clips showing different type of mixers in action and a overview of their uses. * Gives practical insights by the top professional in the field. * Details applications in key industries. * Provides the professional with information he did receive in school
Download or read book Mixing in the Process Industries written by A W NIENOW and published by Butterworth-Heinemann. This book was released on 1997-09-11 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions. This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions.
Download or read book Unit Operations i Fluid Flow and Mechanical Operations written by and published by Nirali Prakashan. This book was released on with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Mechanics Heat Transfer and Mass Transfer written by K. S. Raju and published by John Wiley & Sons. This book was released on 2011-04-20 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This broad-based book covers the three major areas of Chemical Engineering. Most of the books in the market involve one of the individual areas, namely, Fluid Mechanics, Heat Transfer or Mass Transfer, rather than all the three. This book presents this material in a single source. This avoids the user having to refer to a number of books to obtain information. Most published books covering all the three areas in a single source emphasize theory rather than practical issues. This book is written with emphasis on practice with brief theoretical concepts in the form of questions and answers, not adopting stereo-typed question-answer approach practiced in certain books in the market, bridging the two areas of theory and practice with respect to the core areas of chemical engineering. Most parts of the book are easily understandable by those who are not experts in the field. Fluid Mechanics chapters include basics on non-Newtonian systems which, for instance find importance in polymer and food processing, flow through piping, flow measurement, pumps, mixing technology and fluidization and two phase flow. For example it covers types of pumps and valves, membranes and areas of their use, different equipment commonly used in chemical industry and their merits and drawbacks. Heat Transfer chapters cover the basics involved in conduction, convection and radiation, with emphasis on insulation, heat exchangers, evaporators, condensers, reboilers and fired heaters. Design methods, performance, operational issues and maintenance problems are highlighted. Topics such as heat pipes, heat pumps, heat tracing, steam traps, refrigeration, cooling of electronic devices, NOx control find place in the book. Mass transfer chapters cover basics such as diffusion, theories, analogies, mass transfer coefficients and mass transfer with chemical reaction, equipment such as tray and packed columns, column internals including structural packings, design, operational and installation issues, drums and separators are discussed in good detail. Absorption, distillation, extraction and leaching with applications and design methods, including emerging practices involving Divided Wall and Petluk column arrangements, multicomponent separations, supercritical solvent extraction find place in the book.
Download or read book Ludwig s Applied Process Design for Chemical and Petrochemical Plants written by A. Kayode Coker and published by Elsevier. This book was released on 2011-08-30 with total page 1023 pages. Available in PDF, EPUB and Kindle. Book excerpt: This complete revision of Applied Process Design for Chemical and Petrochemical Plants, Volume 1 builds upon Ernest E. Ludwig's classic text to further enhance its use as a chemical engineering process design manual of methods and proven fundamentals. This new edition includes important supplemental mechanical and related data, nomographs and charts. Also included within are improved techniques and fundamental methodologies, to guide the engineer in designing process equipment and applying chemical processes to properly detailed equipment.All three volumes of Applied Process Design for Chemical and Petrochemical Plants serve the practicing engineer by providing organized design procedures, details on the equipment suitable for application selection, and charts in readily usable form. Process engineers, designers, and operators will find more chemical petrochemical plant design data in:Volume 2, Third Edition, which covers distillation and packed towers as well as material on azeotropes and ideal/non-ideal systems.Volume 3, Third Edition, which covers heat transfer, refrigeration systems, compression surge drums, and mechanical drivers.A. Kayode Coker, is Chairman of Chemical & Process Engineering Technology department at Jubail Industrial College in Saudi Arabia. He's both a chartered scientist and a chartered chemical engineer for more than 15 years. and an author of Fortran Programs for Chemical Process Design, Analysis and Simulation, Gulf Publishing Co., and Modeling of Chemical Kinetics and Reactor Design, Butterworth-Heinemann. - Provides improved design manuals for methods and proven fundamentals of process design with related data and charts - Covers a complete range of basic day-to-day petrochemical operation topics with new material on significant industry changes since 1995.
Download or read book Stirring written by Marko Zlokarnik and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stirring is one of the most important operations in process technology. No chemical exists that has non been submitted to a mixing process during its synthesis. Furthermore, stirring is important for the pharmaceutical and food industries, too. The most important mixing operations are applied to homogenize miscible liquids, to intensify the heat transfer between a liquid and the heat exchanger, and to perform mass transfer in multiphase systems, to whirl up solid particles in fluids and to disperse immiscible liquids. This book discusses in detail the above listed operations, taking into consideration also different rheological behaviour of the system treated (Newtonian and non-Newtonian). For each stirring task reliable scale-up rules are presented. In addition, mixing in pipes is discussed in great detail. Since there are so many aspects it is almost impossible for the user to get and keep an overview. Therefore, this book presents more than 730 references and covers publications until the end of the year 2000 for everybody who needs to know more details.
Download or read book Ludwig s Applied Process Design for Chemical and Petrochemical Plants Incorporating Process Safety Incidents written by A. Kayode Coker and published by Elsevier. This book was released on 2024-07-10 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ludwig's Applied Process Design for Chemical and Petrochemical Plants Incorporating Process Safety Incidents is ever evolving starting with the first edition some 60 years ago. The volumes in this fifth edition provide improved techniques and fundamental design methodologies to guide the practicing engineer in designing process equipment and applying chemical processes to the properly detailed hardware. As indicative of the new title, process safety incidents are incorporated in many of the chapters, reviewing the root causes, and how these could be mitigated in future. Like its predecessor, this new edition continues to present updated information for achieving optimum operational and process conditions and to avoid problems caused by inadequate sizing and lack of internally detailed hardware. The volumes provide both fundamental theories where applicable and direct application of these theories to applied equations essential in the design effort. This approach in presenting design information is essential for troubleshooting process equipment and in executing system performance analysis. Volume 1B continues to cover mixing of liquids, process safety and pressure[1]relieving devices, metallurgy and corrosion, and process optimization. It builds upon Ernest E. Ludwig's classic text to further enhance its use as a chemical engineering process design manual of methods and proven fundamentals. This new edition includes new content on three-phase separation, mixing of liquids, ejectors, and mechanical vacuum systems, process safety and pressure-relieving devices, metallurgy and corrosion, and optimization of chemical process/blending. Some chapters review pressure-relieving devices and provide case studies for process safety incidents, which are well illustrated from US Chemical Safety Hazard Investigation Board (www.csb.gov). Finally, this book contains a glossary of Petroleum and Petrochemical Terminologies and Physical and Chemical Characteristics of Major Hydrocarbons.? Provides improved design manual for methods and proven fundamentals of process design with related data and charts? Covers complete range of basic day-to-day petrochemical operation topics? Extensively revised with new material added on three-phase separation, metallurgy, and corrosion? Process safety management/HAZOP and hazard analyses, and optimization of chemical process/blending? Presents many examples using Honeywell UniSim Design software, developed and executable computer programs, and Excel spreadsheet programs? Includes case studies of process safety incidents, guidance for troubleshooting, and checklists? Includes Software of Conversion Table and 30+ process data sheets in excel format
Download or read book Mixing written by Shinji Nagata and published by Halsted Press. This book was released on 1975 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Reactor Modeling written by Hugo A. Jakobsen and published by Springer Science & Business Media. This book was released on 2014-04-02 with total page 1589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Reactor Modeling closes the gap between Chemical Reaction Engineering and Fluid Mechanics. The second edition consists of two volumes: Volume 1: Fundamentals. Volume 2: Chemical Engineering Applications In volume 1 most of the fundamental theory is presented. A few numerical model simulation application examples are given to elucidate the link between theory and applications. In volume 2 the chemical reactor equipment to be modeled are described. Several engineering models are introduced and discussed. A survey of the frequently used numerical methods, algorithms and schemes is provided. A few practical engineering applications of the modeling tools are presented and discussed. The working principles of several experimental techniques employed in order to get data for model validation are outlined. The monograph is based on lectures regularly taught in the fourth and fifth years graduate courses in transport phenomena and chemical reactor modeling and in a post graduate course in modern reactor modeling at the Norwegian University of Science and Technology, Department of Chemical Engineering, Trondheim, Norway. The objective of the book is to present the fundamentals of the single-fluid and multi-fluid models for the analysis of single and multiphase reactive flows in chemical reactors with a chemical reactor engineering rather than mathematical bias. Organized into 13 chapters, it combines theoretical aspects and practical applications and covers some of the recent research in several areas of chemical reactor engineering. This book contains a survey of the modern literature in the field of chemical reactor modeling.
Download or read book Fluid Mechanics of Mixing written by R. King and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a selection of the material presented at the 7th European Mixing Congress. It is concerned exclusively with mixing in circular section vessels, using centrally mounted paddles or similar impellers. The contents are arranged under three classifications: Modelling of Mixing Processes, Mixing Operations and Experimental Techniques. The classifications result in the original material appearing in a different order to that of the Congress. This arrangement is intended to assist the reader in identifying the topic area by function or application, rather than by technology. In this book the section on Modelling contains papers which focus on the representation of the mixing process, whether by equation, scale-up criteria, or fluid dynamic simulation. Similarly, Mixing Operations are concerned with the application or function of the mixing process, such as mass transfer, heat transfer or mixing time. Experimental Techniques addresses the tools the researcher needs to use at the data gathering experimental stage. It collects together advances made in the various methods used by some of the foremost researchers, and indicates those areas still in need of additional instrumentation or methods of data reduction. The book is intended for researchers, designers and users of mixing equipment, and for those planning research and development programmes and who wish to keep up to date with advances in the basic technology and its applications.
Download or read book Chemical Reactor Modeling written by Hugo A. Jakobsen and published by Springer Science & Business Media. This book was released on 2008-10-15 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book closes the gap between Chemical Reaction Engineering and Fluid Mechanics. It provides the basic theory for momentum, heat and mass transfer in reactive systems. Numerical methods for solving the resulting equations as well as the interplay between physical and numerical modes are discussed. The book is written using the standard terminology of this community. It is intended for researchers and engineers who want to develop their own codes, or who are interested in a deeper insight into commercial CFD codes in order to derive consistent extensions and to overcome "black box" practice. It can also serve as a textbook and reference book.
Download or read book Food Mixing written by P. J. Cullen and published by John Wiley & Sons. This book was released on 2009-07-21 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mixing of liquids, solids and gases is one of the most commonunit operations in the food industry. Mixing increases thehomogeneity of a system by reducing non-uniformity or gradients incomposition, properties or temperature. Secondary objectives ofmixing include control of rates of heat and mass transfer,reactions and structural changes. In food processing applications,additional mixing challenges include sanitary design, complexrheology, desire for continuous processing and the effects ofmixing on final product texture and sensory profiles. Mixing ensures delivery of a product with constant properties. Forexample, consumers expect all containers of soups, breakfastcereals, fruit mixes, etc to contain the same amount of eachingredient. If mixing fails to achieve the requiredproduct yield, quality, organoleptic or functional attributes,production costs may increase significantly. This volume brings together essential information on theprinciples and applications of mixing within food processing. Whilethere are a number of creditable references covering generalmixing, such publications tend to be aimed at the chemical industryand so topics specific to food applications are often neglected.Chapters address the underlying principles of mixing, equipmentdesign, novel monitoring techniques and the numerical techniquesavailable to advance the scientific understanding of food mixing.Food mixing applications are described in detail. The book will be useful for engineers and scientists who need tospecify and select mixing equipment for specific processingapplications and will assist with the identification and solving ofthe wide range of mixing problems that occur in the food,pharmaceutical and bioprocessing industries. It will also be ofinterest to those who teach, study and research food science andfood engineering.
Download or read book Advances in Industrial Mixing written by Suzanne M. Kresta and published by John Wiley & Sons. This book was released on 2016-03-11 with total page 1035 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Industrial Mixing is a companion volume and update to the Handbook of Industrial Mixing. The second volume fills in gaps for a number of industries that were not covered in the first edition. Significant changes in five of the fundamental areas are covered in entirely updated or new chapters. The original text is provided as a searchable pdf file on the accompanying USB. This book explains industrial mixers and mixing problems clearly and concisely. Gives practical insights by the top professionals in the field, combining industrial design standards with fundamental insight. Details applications in 14 key industries. Six of these are new since the first edition. Provides the professional with information he/she did not receive in school. Five completely rewritten chapters on mixing fundamentals where significant advances have happened since the first edition and seven concise update chapters which summarize critical technical information.
Download or read book Physicochemical Treatment Processes written by Lawrence K. Wang and published by Springer Science & Business Media. This book was released on 2007-11-13 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past 30 years have seen the emergence of a growing desire worldwide to take positive actions to restore and protect the environment from the degrading effects of all forms of pollution: air, noise, solid waste, and water. Because pollution is a direct or indirect consequence of waste, the seemingly idealistic demand for “zero discharge” can be construed as an unrealistic demand for zero waste. However, as long as waste exists, we can only attempt to abate the subsequent pollution by converting it to a less noxious form. Three major questions usually arise when a particular type of pollution has been identified: (1) How serious is the pollution? (2) Is the technology to abate it available? and (3) Do the costs of abatement justify the degree of abatement achieved? The principal intention of the Handbook of Environmental Engineering series is to help readers formulate answers to the last two questions. The traditional approach of applying tried-and-true solutions to specific pollution pr- lems has been a major contributing factor to the success of environmental engineering, and has accounted in large measure for the establishment of a “methodology of pollution c- trol. ” However, realization of the ever-increasing complexity and interrelated nature of current environmental problems makes it imperative that intelligent planning of pollution abatement systems be undertaken.
Download or read book Rules of Thumb for Chemical Engineers written by Stephen Hall and published by Butterworth-Heinemann. This book was released on 2012-06-18 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation A handbook for chemical and process engineers who need a solution to their practical on-the-job problems. It solves process design problems quickly, accurately and safely, with hundreds of techniques, shortcuts and calculations.
