Download or read book Mixing and Chemical Reactions in Turbulent Flow Reactors written by Roger Norris Keeler and published by . This book was released on 1964 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mixing and Chemical Reactions in Turbulent Flow Reactors written by Roger Norris Keeler and published by . This book was released on 1997 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Mixing and Chemical Reactions written by Jerzy Bałdyga and published by John Wiley & Sons. This book was released on 1999-03-12 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent Mixing and Chemical Reactions Jerzy Ba???dyga, Warsaw University of Technology, Poland John R. Bourne, Visiting Professor, University of Birmingham, UK and Emeritus Professor, ETH Zurich, Switzerland The way in which reagents are mixed can greatly influence the yield and range of products formed by fast, multiple chemical reactions. Understanding this phenomenon enables chemists to carry out reactions more selectively, make better use of raw materials and simplify product workup and separation. Turbulent Mixing and Chemical Reactions presents a balanced treatment of the connection between mixing and reaction. It contains theoretical aspects, experimental methods and expected results as well as worked examples to illustrate problem solving. This book will be of interest to all scientists involved in chemical engineering, physical chemistry, and synthetic chemists in the fine chemical and pharmaceuticals industry.
Download or read book Turbulence in Mixing Operations written by Robert S. Brodkey and published by . This book was released on 1975 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fast Chemical Reactions in Turbulent Flows written by Rustam Ya Deberdeev and published by Smithers Rapra. This book was released on 2013-09-02 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals of fast liquid-phase chemical reactions and the principles of their scientific foundation, technical implementation and industrial application of new technologies. In addition, the equipment required to perform these reactions, in a turbulent mode in the chemical, petrochemical and petroleum industries, is also discussed. The macrokinetic approach has been developed with consideration of the diffusion, hydrodynamics, and heat transfer processes. Due to the advancement of fundamental knowledge, equations of practical engineering importance have been obtained for the calculations of mass and heat transfer processes carried out in conditions of high turbulence, and developed for the implementation in fast chemical reactions involving the synthesis of low molecular weight products and polymers. New methods for controlling the molecular characteristics of polymers have been developed based on the tailored regulation of the hydrodynamics of the reactive mixture flow. Typical processes have been used as model examples to reveal the influence of turbulence on the behaviour of fast chemical reactions used for the synthesis of low molecular weight products, in single-phase and two-phase reactive systems. Brand new tubular devices have been developed with the following characteristics: compact size, high productivity, and a quasi-perfect mixing operation mode in turbulent flows. These devices are subdivided into cylindrical, shell-and-tube, 'zone', and diffuser-confusor designs. Original solutions are proposed for the instrumental implementation of fast liquid-phase processes and development of continuous energy- and resource-efficient technologies for the synthesis of some large-scale compounds.
Download or read book Turbulent Reactive Flows written by R. Borghi and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent reactive flows are of common occurrance in combustion engineering, chemical reactor technology and various types of engines producing power and thrust utilizing chemical and nuclear fuels. Pollutant formation and dispersion in the atmospheric environment and in rivers, lakes and ocean also involve interactions between turbulence, chemical reactivity and heat and mass transfer processes. Considerable advances have occurred over the past twenty years in the understanding, analysis, measurement, prediction and control of turbulent reactive flows. Two main contributors to such advances are improvements in instrumentation and spectacular growth in computation: hardware, sciences and skills and data processing software, each leading to developments in others. Turbulence presents several features that are situation-specific. Both for that reason and a number of others, it is yet difficult to visualize a so-called solution of the turbulence problem or even a generalized approach to the problem. It appears that recognition of patterns and structures in turbulent flow and their study based on considerations of stability, interactions, chaos and fractal character may be opening up an avenue of research that may be leading to a generalized approach to classification and analysis and, possibly, prediction of specific processes in the flowfield. Predictions for engineering use, on the other hand, can be foreseen for sometime to come to depend upon modeling of selected features of turbulence at various levels of sophistication dictated by perceived need and available capability.
Download or read book Fast Liquid Phase Processes in Turbulent Flows written by Karl Minsker and published by CRC Press. This book was released on 2004-10-01 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the fundamental laws of passing of fast liquid-phase chemical as well as heat and mass transfer processes in turbulent flows. The fundamental laws of passing of fast liquid-phase chemical and also heat and mass transfer processes in turbulent flows are considered in the book. Development of a macrokinetics approach is generalized to the analysis of fast chemical reactions mainly based on an example of cationic isobutylene polymerization, which falls into to a new class of liquid-phase processes. The ways of decision of the hydrodynamical, thermal and kinetic movement’s equations of reaction mixture in which the fast exothermic chemical reaction runs are described. The principles and laws of formation of the essentially new mode of quasi-plug-flow mode are considered in turbulent flows ensuring quasi-isothermal conditions in zone reaction. The principles of work and area of industrial use of tubular turbulent devices cylindrical reactor, divergent-covergent reactor, shell-and-tube reactor, and reactor with fractional introduction of reactants are considered.
Download or read book Handbook of Batch Process Design written by P.N. Sharratt and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Batch processes are used to manufacture many fine organic chemicals, and as such they can be considered to underpin much of the modern chemical industry. Despite widespread use and a consequent huge contribution to wealth creation, batch processes have attracted limited attention outside the user industries. Batch chemicals processing uses a number of core techniques and technologies, such as scheduling and sequence control, agitation and batch filtration. The combination of these technologies with often complex chemistry, the multi-purpose nature of much of this type of plant, the distinctive safety and environmental issues, and a fast moving commercial environment makes the development of a successful batch process a considerable challenge for the chemist or engineer. The literature on the topics covered in this book is fragmented and often not easily accessible, so this handbook has been written to address this problem and to bring together design and process analysis methods in the core areas of batch process design. By combining the science and pragmatism required in the development of successful batch processes this new book provides answers to real problems in an accessible and concise way. Written by an international team of authors drawn from industry, consulting and academe, this book is an essential part of the library of any chemist, technologist or engineer working on the development of new or existing batch processes.
Download or read book Chemical Reactor Modeling written by Hugo A. Jakobsen and published by Springer Science & Business Media. This book was released on 2014-04-02 with total page 1589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Reactor Modeling closes the gap between Chemical Reaction Engineering and Fluid Mechanics. The second edition consists of two volumes: Volume 1: Fundamentals. Volume 2: Chemical Engineering Applications In volume 1 most of the fundamental theory is presented. A few numerical model simulation application examples are given to elucidate the link between theory and applications. In volume 2 the chemical reactor equipment to be modeled are described. Several engineering models are introduced and discussed. A survey of the frequently used numerical methods, algorithms and schemes is provided. A few practical engineering applications of the modeling tools are presented and discussed. The working principles of several experimental techniques employed in order to get data for model validation are outlined. The monograph is based on lectures regularly taught in the fourth and fifth years graduate courses in transport phenomena and chemical reactor modeling and in a post graduate course in modern reactor modeling at the Norwegian University of Science and Technology, Department of Chemical Engineering, Trondheim, Norway. The objective of the book is to present the fundamentals of the single-fluid and multi-fluid models for the analysis of single and multiphase reactive flows in chemical reactors with a chemical reactor engineering rather than mathematical bias. Organized into 13 chapters, it combines theoretical aspects and practical applications and covers some of the recent research in several areas of chemical reactor engineering. This book contains a survey of the modern literature in the field of chemical reactor modeling.
Download or read book Chemical Reactor Design and Technology written by Hugo de Lasa and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's frustrations and anxieties resulting from two energy crises in only one decade, show us the problems and fragility of a world built on high energy consumption, accustomed to the use of cheap non-renewable energy and to the acceptance of eXisting imbalances between the resources and demands of countries. Despite all these stressing factors, our world is still hesitatins about the urgency of undertaking new and decisive research that could stabilize our future, Could this trend change in the near future? In our view, two different scenarios are possible. A renewed energy tension could take place with an unpredictable timing mostly related to political and economic factors, This could bring again scientists and technologists to a new state of shock and awaken our talents, A second interesting and beneficial scenario could result from the positive influence of a new generation of researchers that with or without immediate crisis, acting both in industry and academia, will face the challenge of developing technologies and processes to pave the way to a less vulnerable society, Because Chemical Reactor Design and Technology activities are at the heart of these required new technologies the timeliness of the NATO-Advanced Study Institute at the University of Western Ontario, London, was very appropriate.
Download or read book Handbook of Industrial Mixing written by Edward L. Paul and published by John Wiley & Sons. This book was released on 2004-02-17 with total page 1450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Industrial Mixing will explain the difference and uses of a variety of mixers including gear mixers, top entry mixers, side entry mixers, bottom entry mixers, on-line mixers, and submerged mixers The Handbook discusses the trade-offs among various mixers, concentrating on which might be considered for a particular process. Handbook of Industrial Mixing explains industrial mixers in a clear concise manner, and also: * Contains a CD-ROM with video clips showing different type of mixers in action and a overview of their uses. * Gives practical insights by the top professional in the field. * Details applications in key industries. * Provides the professional with information he did receive in school
Download or read book Initial Mixing in Coagulation Processes written by Richard J. Stenquist and published by . This book was released on 1972 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Reactor Development written by D. Thoenes and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Reactor Development is written primarily for chemists and chemical engineers who are concerned with the development of a chemical synthesis from the laboratory bench scale, where the first successful experiments are performed, to the design desk, where the first commercial reactor is conceived. It is also written for those chemists and chemical engineers who are concerned with the further development of a chemical process with the objective of enhancing the performance of an existing industrial plant, as well as for students of chemistry and chemical engineering. In Part I, the `how' and the `why' of chemical reaction engineering are explained, particularly for those who are not familiar with this area. Part II deals with the effects of a number of physical phenomena on the outcome of chemical reactions, such as micro and meso-mixing and residence time distribution, mass transfer between two phases, and the formation of another phase, such as in precipitations. These scale-dependent effects are not only important in view of the conversion of chemical reactions, but also with regard to the selectivity, and in the case of solid products, to their morphology. In Part III, some applications are treated in a general way, including organic syntheses, the conversion and formation of inorganic solids, catalytic processes and polymerizations. The last chapter gives a review of the importance of the selectivity for product quality and for the purity of waste streams. For research chemists and chemical engineers whose work involves chemical reaction engineering. The book is also suitable as a supplementary graduate text.
Download or read book Multiphase Particulate Systems in Turbulent Flows written by Wioletta Podgórska and published by CRC Press. This book was released on 2019-09-17 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase Particulate Systems in Turbulent Flows: Fluid-Liquid and Solid-Liquid Dispersions provides methods necessary to analyze complex particulate systems and related phenomena including physical, chemical and mathematical description of fundamental processes influencing crystal size and shape, suspension rheology, interfacial area of drops and bubbles in extractors and bubble columns. Examples of mathematical model formulation for different processes taking place in such systems is shown. Discussing connections between turbulent mixing mechanisms and precipitation, it discusses influence of fine-scale structure of turbulence, including its intermittent character, on breakage of drops, bubbles, cells, plant cell aggregates. An important aspect of the mathematical modeling presented in the book is multi-fractal, taking into account the influence of internal intermittency on different phenomena. Key Features Provides detailed descriptions of dispersion processes in turbulent flow, interactions between dispersed entities, and continuous phase in a single volume Includes simulation models and validation experiments for liquid-liquid, gas-liquid, and solid-liquid dispersions in turbulent flows Helps reader learn formulation of mathematical models of breakage or aggregation processes using multifractal theory Explains how to solve different forms of population balance equations Presents a combination of theoretical and engineering approaches to particulate systems along with discussion of related diversity, with exercises and case studies
Download or read book Micro and Macro Mixing written by Henning Bockhorn and published by Springer Science & Business Media. This book was released on 2009-12-26 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The homogenization of single phase gases or liquids with chemical reactive components by mixing belongs to one of the oldest basic operations applied in chemical engineering. The mixing process is used as an essential step in nearly all processes of the chemical industry as well as the pharmaceutical and food ind- tries. Recent experimentally and theoretically based results from research work lead to a fairly good prediction of the velocity fields in differend kinds of mixers, where as predictions of simultaneously proceeding homogeneous chemical re- tions, are still not reliable in a similar way. Therefore the design of equipment for mixing processes is still derived from measurements of the so called “mixing time” which is related to the applied methods of measurement and the special - sign of the test equipment itself. The cooperation of 17 research groups was stimulated by improved modern methods for experimental research and visualization, for simulations and nume- cal calculations of mixing and chemical reactions in micro and macro scale of time and local coordinates. The research work was financed for a six years period within the recently finished Priority Program of the German Research Foundation (DFG) named “Analysis, modeling and numerical prediction of flow-mixig with and without chemical reactions (SPP 1141)”. The objective of the investigations was to improve the prediction of efficiencies and selectivities of chemical re- tions on macroscopic scale.
Download or read book Computational Flow Modeling for Chemical Reactor Engineering written by Vivek V. Ranade and published by Academic Press. This book was released on 2002 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book relates the individual aspects of chemical reactor engineering and computational flow modeling in a coherent way to explain the potential of computational flow modeling for reactor engineering research and practice.
Download or read book Mixing and Chemical Reactions written by Jane-Jane Ou and published by . This book was released on 1979 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:
