Download or read book Mixed Mode Simulation and Analog Multilevel Simulation written by Resve A. Saleh and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed-Mode Simulation and Analog Multilevel Simulation addresses the problems of simulating entire mixed analog/digital systems in the time-domain. A complete hierarchy of modeling and simulation methods for analog and digital circuits is described. Mixed-Mode Simulation and Analog Multilevel Simulation also provides a chronology of the research in the field of mixed-mode simulation and analog multilevel simulation over the last ten to fifteen years. In addition, it provides enough information to the reader so that a prototype mixed-mode simulator could be developed using the algorithms in this book. Mixed-Mode Simulation and Analog Multilevel Simulation can also be used as documentation for the SPLICE family of mixed-mode programs as they are based on the algorithms and techniques described in this book.

Download or read book Mixed Mode Simulation written by Resve A. Saleh and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our purpose in writing this book was two-fold. First, we wanted to compile a chronology of the research in the field of mixed-mode simulation over the last ten to fifteen years. A substantial amount of work was done during this period of time but most of it was published in archival form in Masters theses and Ph. D. dissertations. Since the interest in mixed-mode simulation is growing, and a thorough review of the state-of-the-art in the area was not readily available, we thought it appropriate to publish the information in the form of a book. Secondly, we wanted to provide enough information to the reader so that a proto type mixed-mode simulator could be developed using the algorithms in this book. The SPLICE family of programs is based on the algorithms and techniques described in this book and so it can also serve as docu mentation for these programs. ACKNOWLEDGEMENTS The authors would like to dedicate this book to Prof. D. O. Peder son for inspiring this research work and for providing many years of support and encouragement The authors enjoyed many fruitful discus sions and collaborations with Jim Kleckner, Young Kim, Alberto Sangiovanni-Vincentelli, and Jacob White, and we thank them for their contributions. We also thank the countless others who participated in the research work and read early versions of this book. Lillian Beck provided many useful suggestions to improve the manuscript. Yun cheng Ju did the artwork for the illustrations.

Download or read book Simulation and Optimization of Digital Circuits written by Vazgen Melikyan and published by Springer. This book was released on 2018-04-12 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes new, fuzzy logic-based mathematical apparatus, which enable readers to work with continuous variables, while implementing whole circuit simulations with speed, similar to gate-level simulators and accuracy, similar to circuit-level simulators. The author demonstrates newly developed principles of digital integrated circuit simulation and optimization that take into consideration various external and internal destabilizing factors, influencing the operation of digital ICs. The discussion includes factors including radiation, ambient temperature, electromagnetic fields, and climatic conditions, as well as non-ideality of interconnects and power rails.

Download or read book Computer Aided Design of Analog Integrated Circuits and Systems written by Rob A. Rutenbar and published by John Wiley & Sons. This book was released on 2002-05-06 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tools and techniques you need to break the analog design bottleneck! Ten years ago, analog seemed to be a dead-end technology. Today, System-on-Chip (SoC) designs are increasingly mixed-signal designs. With the advent of application-specific integrated circuits (ASIC) technologies that can integrate both analog and digital functions on a single chip, analog has become more crucial than ever to the design process. Today, designers are moving beyond hand-crafted, one-transistor-at-a-time methods. They are using new circuit and physical synthesis tools to design practical analog circuits; new modeling and analysis tools to allow rapid exploration of system level alternatives; and new simulation tools to provide accurate answers for analog circuit behaviors and interactions that were considered impossible to handle only a few years ago. To give circuit designers and CAD professionals a better understanding of the history and the current state of the art in the field, this volume collects in one place the essential set of analog CAD papers that form the foundation of today's new analog design automation tools. Areas covered are: * Analog synthesis * Symbolic analysis * Analog layout * Analog modeling and analysis * Specialized analog simulation * Circuit centering and yield optimization * Circuit testing Computer-Aided Design of Analog Integrated Circuits and Systems is the cutting-edge reference that will be an invaluable resource for every semiconductor circuit designer and CAD professional who hopes to break the analog design bottleneck.

Download or read book Digital Timing Macromodeling for VLSI Design Verification written by Jeong-Taek Kong and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Timing Macromodeling for VLSI Design Verification first of all provides an extensive history of the development of simulation techniques. It presents detailed discussion of the various techniques implemented in circuit, timing, fast-timing, switch-level timing, switch-level, and gate-level simulation. It also discusses mixed-mode simulation and interconnection analysis methods. The review in Chapter 2 gives an understanding of the advantages and disadvantages of the many techniques applied in modern digital macromodels. The book also presents a wide variety of techniques for performing nonlinear macromodeling of digital MOS subcircuits which address a large number of shortcomings in existing digital MOS macromodels. Specifically, the techniques address the device model detail, transistor coupling capacitance, effective channel length modulation, series transistor reduction, effective transconductance, input terminal dependence, gate parasitic capacitance, the body effect, the impact of parasitic RC-interconnects, and the effect of transmission gates. The techniques address major sources of errors in existing macromodeling techniques, which must be addressed if macromodeling is to be accepted in commercial CAD tools by chip designers. The techniques presented in Chapters 4-6 can be implemented in other macromodels, and are demonstrated using the macromodel presented in Chapter 3. The new techniques are validated over an extremely wide range of operating conditions: much wider than has been presented for previous macromodels, thus demonstrating the wide range of applicability of these techniques.

Download or read book Simulation Techniques and Solutions for Mixed Signal Coupling in Integrated Circuits written by Nishath K. Verghese and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of putting `systems on a chip' has been a difficult challenge that is only recently being met. Since the world is `analog', putting systems on a chip requires putting analog interfaces on the same chip as digital processing functions. Since some processing functions are accomplished more efficiently in analog circuitry, chips with a large amount of analog and digital circuitry are being designed. Whether a small amount of analog circuitry is combined with varying amounts of digital circuitry or the other way around, the problem encountered in marrying analog and digital circuitry are the same but with different scope. Some of the most prevalent problems are chip/package capacitive and inductive coupling, ringing on the RLC tuned circuits that form the chip/package power supply rails and off-chip drivers and receivers, coupling between circuits through the chip substrate bulk, and radiated emissions from the chip/package interconnects. To aggravate the problems of designers who have to deal with the complexity of mixed-signal coupling there is a lack of verification techniques to simulate the problem. In addition to considering RLC models for the various chip/package/board level parasitics, mixed-signal circuit designers must also model coupling through the common substrate when simulating ICs to obtain an accurate estimate of coupled noise in their designs. Unfortunately, accurate simulation of substrate coupling has only recently begun to receive attention, and techniques for the same are not widely known. Simulation Techniques and Solutions for Mixed-Signal Coupling in Integrated Circuits addresses two major issues of the mixed-signal coupling problem -- how to simulate it and how to overcome it. It identifies some of the problems that will be encountered, gives examples of actual hardware experiences, offers simulation techniques, and suggests possible solutions. Readers of this book should come away with a clear directive to simulate their design for interactions prior to building the design, versus a `build it and see' mentality.

Download or read book Model Engineering in Mixed Signal Circuit Design written by Sorin Alexander Huss and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the first time, this up-to-date text combines the main issues of the hardware description language VHDL-AMS aimed at model representation of mixed-signal circuits and systems, characterization methods and tools for the extraction of model parameters, and modelling methodologies for accurate high-level behavioural models.

Download or read book Test and Design for Testability in Mixed Signal Integrated Circuits written by Jose Luis Huertas Díaz and published by Springer Science & Business Media. This book was released on 2010-02-23 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Test and Design-for-Testability in Mixed-Signal Integrated Circuits deals with test and design for test of analog and mixed-signal integrated circuits. Especially in System-on-Chip (SoC), where different technologies are intertwined (analog, digital, sensors, RF); test is becoming a true bottleneck of present and future IC projects. Linking design and test in these heterogeneous systems will have a tremendous impact in terms of test time, cost and proficiency. Although it is recognized as a key issue for developing complex ICs, there is still a lack of structured references presenting the major topics in this area. The aim of this book is to present basic concepts and new ideas in a manner understandable for both professionals and students. Since this is an active research field, a comprehensive state-of-the-art overview is very valuable, introducing the main problems as well as the ways of solution that seem promising, emphasizing their basis, strengths and weaknesses. In essence, several topics are presented in detail. First of all, techniques for the efficient use of DSP-based test and CAD test tools. Standardization is another topic considered in the book, with focus on the IEEE 1149.4. Also addressed in depth is the connecting design and test by means of using high-level (behavioural) description techniques, specific examples are given. Another issue is related to test techniques for well-defined classes of integrated blocks, like data converters and phase-locked-loops. Besides these specification-driven testing techniques, fault-driven approaches are described as they offer potential solutions which are more similar to digital test methods. Finally, in Design-for-Testability and Built-In-Self-Test, two other concepts that were taken from digital design, are introduced in an analog context and illustrated for the case of integrated filters. In summary, the purpose of this book is to provide a glimpse on recent research results in the area of testing mixed-signal integrated circuits, specifically in the topics mentioned above. Much of the work reported herein has been performed within cooperative European Research Projects, in which the authors of the different chapters have actively collaborated. It is a representative snapshot of the current state-of-the-art in this emergent field.

Download or read book Mechatronic Systems written by Georg Pelz and published by John Wiley & Sons. This book was released on 2003-06-02 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the modelling and simulation of mechatronic and micromechatronic systems using HDLs. Provides an overview of the design of digital and analog circuitry and software for mechatronic systems. Presents practical guidance on both chip and systems design for a wide range of mechatronic applications. Focuses on a practical approach to the design and simulation of electronic hardware and components of mechatronic systems.

Download or read book Analog Circuit Design written by Johan Huijsing and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Johan H. Huijsing This book contains 18 tutorial papers concentrated on 3 topics, each topic being covered by 6 papers. The topics are: Low-Noise, Low-Power, Low-Voltage Mixed-Mode Design with CAD Tools Voltage, Current, and Time References The papers of this book were written by top experts in the field, currently working at leading European and American universities and companies. These papers are the reviewed versions of the papers presented at the Workshop on Advances in Analog Circuit Design. which was held in Villach, Austria, 26-28 April 1995. The chairman of the Workshop was Dr. Franz Dielacher from Siemens, Austria. The program committee existed of Johan H. Huijsing from the Delft University of Technology, Prof.Willy Sansen from the Catholic University of Leuven, and Dr. Rudy 1. van der Plassche from Philips Eindhoven. This book is the fourth of aseries dedicated to the design of analog circuits. The topics which were covered earlier were: Operational Amplifiers Analog to Digital Converters Analog Computer Aided Design Mixed AlD Circuit Design Sensor Interface Circuits Communication Circuits Low-Power, Low-Voltage Integrated Filters Smart Power As the Workshop will be continued year by year, a valuable series of topics will be built up from all the important areas of analog circuit design. I hope that this book will help designers of analog circuits to improve their work and to speed it up.

Download or read book The Electronic Design Automation Handbook written by Dirk Jansen and published by Springer Science & Business Media. This book was released on 2010-02-23 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: When I attended college we studied vacuum tubes in our junior year. At that time an average radio had ?ve vacuum tubes and better ones even seven. Then transistors appeared in 1960s. A good radio was judged to be one with more thententransistors. Latergoodradioshad15–20transistors and after that everyone stopped counting transistors. Today modern processors runing personal computers have over 10milliontransistorsandmoremillionswillbeaddedevery year. The difference between 20 and 20M is in complexity, methodology and business models. Designs with 20 tr- sistors are easily generated by design engineers without any tools, whilst designs with 20M transistors can not be done by humans in reasonable time without the help of Prof. Dr. Gajski demonstrates the Y-chart automation. This difference in complexity introduced a paradigm shift which required sophisticated methods and tools, and introduced design automation into design practice. By the decomposition of the design process into many tasks and abstraction levels the methodology of designing chips or systems has also evolved. Similarly, the business model has changed from vertical integration, in which one company did all the tasks from product speci?cation to manufacturing, to globally distributed, client server production in which most of the design and manufacturing tasks are outsourced.

Download or read book System Design Automation written by Renate Merker and published by Springer Science & Business Media. This book was released on 2001-03-31 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design automation of electronic and hybrid systems is a steadily growing field of interest and a permanent challenge for researchers in Electronics, Computer Engineering and Computer Science. System Design Automation presents some recent results in design automation of different types of electronic and mechatronic systems. It deals with various topics of design automation, ranging from high level digital system synthesis, through analogue and heterogeneous system analysis and design, up to system modeling and simulation. Design automation is treated from the aspects of its theoretical fundamentals, its basic approach and its methods and tools. Several application cases are presented in detail. The book consists of three chapters: High-Level System Synthesis (Digital Hardware/Software Systems). Here embedded systems, distributed systems and processor arrays as well as hardware-software codesign are treated. Also three special application cases are discussed in detail; Analog and Heterogeneous System Design (System Approach and Methodology). This chapter copes with the analysis and design of hybrid systems comprised of analog and digital, electronic and mechanical components; System Simulation and Evaluation (Methods and Tools). In this chapter object-oriented Modelling, analog system simulation including fault-simulation, parameter optimization and system validation are regarded. The contents of the book are based on material presented at the Workshop System Design Automation (SDA 2000) organised by the Sonderforschungsbereich 358 of the Deutsche Forschungsgemeinschaft at TU Dresden.

Download or read book Digit Serial Computation written by Richard Hartley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital signal processing (DSP) is used in a wide range of applications such as speech, telephone, mobile radio, video, radar and sonar. The sample rate requirements of these applications range from 10 KHz to 100 MHz. Real time implementation of these systems requires design of hardware which can process signal samples as these are received from the source, as opposed to storing them in buffers and processing them in batch mode. Efficient implementation of real time hardware for DSP applications requires study of families of architectures and implementation styles out of which an appropriate architecture can be selected for a specified application. To this end, the digit-serial implementation style is proposed as an appropriate design methodology for cases where bit-serial systems cannot meet the sample rate requirements, and bit-parallel systems require excessive hardware. The number of bits processed in a clock cycle is referred to as the digit-size. The hardware complexity and the achievable sample rate increase with increase in the digit-size. As special cases, a digit serial system is reduced to bit-serial or bit-parallel when the digit-size is selected to equal one or the word-length, respectively. A family of implementations can be obtained by changing the digit-size parameter, thus permitting an optimal trade-off between throughput and size. Because of their structured architecture, digit-serial designs lend themselves to automatic compilation from algorithmic descriptions. An implementation of this design methodology, the Parsifal silicon compiler was developed at the General Electric Corporate Research and Development laboratory.

Download or read book Modern Methods of Speech Processing written by Ravi P. Ramachandran and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term speech processing refers to the scientific discipline concerned with the analysis and processing of speech signals for getting the best benefit in various practical scenarios. These different practical scenarios correspond to a large variety of applications of speech processing research. Examples of some applications include enhancement, coding, synthesis, recognition and speaker recognition. A very rapid growth, particularly during the past ten years, has resulted due to the efforts of many leading scientists. The ideal aim is to develop algorithms for a certain task that maximize performance, are computationally feasible and are robust to a wide class of conditions. The purpose of this book is to provide a cohesive collection of articles that describe recent advances in various branches of speech processing. The main focus is in describing specific research directions through a detailed analysis and review of both the theoretical and practical settings. The intended audience includes graduate students who are embarking on speech research as well as the experienced researcher already working in the field. For graduate students taking a course, this book serves as a supplement to the course material. As the student focuses on a particular topic, the corresponding set of articles in this book will serve as an initiation through exposure to research issues and by providing an extensive reference list to commence a literature survey. Expe rienced researchers can utilize this book as a reference guide and can expand their horizons in this rather broad area.

Download or read book Robustness in Automatic Speech Recognition written by Jean-Claude Junqua and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foreword Looking back the past 30 years. we have seen steady progress made in the area of speech science and technology. I still remember the excitement in the late seventies when Texas Instruments came up with a toy named "Speak-and-Spell" which was based on a VLSI chip containing the state-of-the-art linear prediction synthesizer. This caused a speech technology fever among the electronics industry. Particularly. applications of automatic speech recognition were rigorously attempt ed by many companies. some of which were start-ups founded just for this purpose. Unfortunately. it did not take long before they realized that automatic speech rec ognition technology was not mature enough to satisfy the need of customers. The fever gradually faded away. In the meantime. constant efforts have been made by many researchers and engi neers to improve the automatic speech recognition technology. Hardware capabilities have advanced impressively since that time. In the past few years. we have been witnessing and experiencing the advent of the "Information Revolution." What might be called the second surge of interest to com mercialize speech technology as a natural interface for man-machine communication began in much better shape than the first one. With computers much more powerful and faster. many applications look realistic this time. However. there are still tremendous practical issues to be overcome in order for speech to be truly the most natural interface between humans and machines.

Download or read book Formal Semantics for VHDL written by Carlos Delgado Kloos and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is recognized that formal design and verification methods are an important requirement for the attainment of high quality system designs. The field has evolved enormously during the last few years, resulting in the fact that formal design and verification methods are nowadays supported by several tools, both commercial and academic. If different tools and users are to generate and read the same language then it is necessary that the same semantics is assigned by them to all constructs and elements of the language. The current IEEE standard VHDL language reference manual (LRM) tries to define VHDL as well as possible in a descriptive way, explaining the semantics in English. But rigor and clarity are very hard to maintain in a semantics defined in this way, and that has already given rise to many misconceptions and contradictory interpretations. Formal Semantics for VHDL is the first book that puts forward a cohesive set of semantics for the VHDL language. The chapters describe several semantics each based on a different underlying formalism: two of them use Petri nets as target language, and two of them higher order logic. Two use functional concepts, and finally another uses the concept of evolving algebras. Formal Semantics for VHDL is essential reading for researchers in formal methods and can be used as a text for an advanced course on the subject.

Download or read book Logic Synthesis for Field Programmable Gate Arrays written by Rajeev Murgai and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Short turnaround has become critical in the design of electronic systems. Software- programmable components such as microprocessors and digital signal processors have been used extensively in such systems since they allow rapid design revisions. However, the inherent performance limitations of software-programmable systems mean that they are inadequate for high-performance designs. Designers thus turned to gate arrays as a solution. User-programmable gate arrays (field-programmable gate arrays, FPGAs) have recently emerged and are changing the way electronic systems are designed and implemented. The growing complexity of the logic circuits that can be packed onto an FPGA chip means that it has become important to have automatic synthesis tools that implement logic functions on these architectures. Logic Synthesis for Field-Programmable Gate Arrays describes logic synthesis for both look-up table (LUT) and multiplexor-based architectures, with a balanced presentation of existing techniques together with algorithms and the system developed by the authors. Audience: A useful reference for VLSI designers, developers of computer-aided design tools, and anyone involved in or with FPGAs.