Download or read book Mine Winding and Transport written by S.C. Walker and published by Elsevier. This book was released on 2012-12-02 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Changes in size and power of available mining transport equipment, combined with improved means of control involving leaky feeder radio and computers, demands a new look at the problem of mine winding and transport. Such changes require the traditional mining engineer to have a much greater engineering application. This book is intended to satisfy that requirement.All the important means of transporting operatives and minerals are addressed, both below ground and on the surface. Safe, speedy and economic transport from the point of mineral extraction to leaving the mine is paramount. This work covers all aspects of the problem including: (1) the design and application of steel wire ropes to a variety of industrial applications, and the various drums and pulleys necessary; (2) a ready means of calculating output/throughput of various transport modes, and relating such to their power requirement; and (3) information on transport modes that enables the most suitable system for given conditions to be determined.A ``first principle'' approach has been adopted throughout, and extensive use of practical examples allows the solution of virtually all associated problems. Although formulae are used where necessary for an understanding of the content, the numerous tables included enable the practicing engineer to make short cuts to more quickly solve particular problems. In addition, the provision of a considerable number of operational constants, many not previously published, enable a more speedy and accurate solution to be effected. By comparing the calculated solutions to a particular problem, the most economic transport mode may be determined.Mining, mechanical and electrical engineers concerned with the safe movement of men or material will find this book of particular use, as will the student preparing for examinations on the subject.
Download or read book Electrotechnology in Mining written by N. Marinovic and published by Elsevier. This book was released on 2012-12-02 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both mining and electrical engineers need to bear in mind the following specific requirements of electrical applications in mining. 1) Economy of electrical plant and equipment in relation to the cost price of the extracted mineral ores, governed by the specific exploitation conditions, 2) Reliability of electrical plant and equipment for extractive operations, operational efficiency, and plant and personnel safety. 3) Special safeguards to counteract the additional hazards posed by the use of electric power, and by electrical phenomena in general. The book has been written along these lines, dealing with those topics which highlight the aspects of electrical engineering of relevance for mining engineers and aspects of mining operations that electrical engineers need, to meet the above-mentioned basic requirements governing the introduction and use of electrical plants and systems in mines.This book is intended as a text book and will be of use to students, and colleges as well as to mining and electrical engineers.
Download or read book Design of Underground Hard Coal Mines written by J. Pazdziora and published by Elsevier. This book was released on 2012-12-02 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The escalating worldwide demand for energy has had the effect, among other things, of promoting the development of coal mining. In some countries specialist design offices were set up and students trained as specialists in mine design and construction. Poland, a country having mining traditions stretching over many centuries, is a good example, and has gained a place in the forefront, not only as a coal producer and exporter, but also as an originator and exporter of technical mining know-how. The author of this book has himself had 25 years of practical experience in mine design, in the supervision of mining investment implementation both at home and abroad, and also in directing the activities of the Chief Mine Design and Studies Office in Poland, plus more than 20 years' teaching experience in the training of mining engineers, in particular as head of the Mine Design Department of the Mining Faculty at the Silesian Polytechnic University in Gliwice. This vast wealth of experience has prompted him to write the present book which discusses the basic problems met with in the design of underground hard-coal mines.The author's primary aim has been to deal with all those questions in mine design which have not yet been answered in mining textbooks and which, from his own personal experience, he considers to be of importance. Accordingly, he presents the general principles governing the design of new mines and the reconstruction of working mines, the development of mining regions, the design of coal-preparation plant, and energy economy in mines. Making use of the broad experience gained by the Polish mining industry in the implementation of mining investment projects, he has quoted several examples of technical and organizational solutions which effectively shorten the mine construction cycle.The book is addressed chiefly to investors and engineers engaged in preparing plans for the development of mining regions, for the construction of new mines, and the reconstruction of existing mines and preparation plants, as well as to students in mining departments of technical schools and universities. The information offered here is of great practical value and may well stimulate the development of new ideas for design and implementation concepts.
Download or read book Evolutionary and Revolutionary Technologies for Mining written by National Research Council and published by National Academies Press. This book was released on 2002-03-14 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Office of Industrial Technologies (OIT) of the U. S. Department of Energy commissioned the National Research Council (NRC) to undertake a study on required technologies for the Mining Industries of the Future Program to complement information provided to the program by the National Mining Association. Subsequently, the National Institute for Occupational Safety and Health also became a sponsor of this study, and the Statement of Task was expanded to include health and safety. The overall objectives of this study are: (a) to review available information on the U.S. mining industry; (b) to identify critical research and development needs related to the exploration, mining, and processing of coal, minerals, and metals; and (c) to examine the federal contribution to research and development in mining processes.
Download or read book Data Mining for Scientific and Engineering Applications written by R.L. Grossman and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in technology are making massive data sets common in many scientific disciplines, such as astronomy, medical imaging, bio-informatics, combinatorial chemistry, remote sensing, and physics. To find useful information in these data sets, scientists and engineers are turning to data mining techniques. This book is a collection of papers based on the first two in a series of workshops on mining scientific datasets. It illustrates the diversity of problems and application areas that can benefit from data mining, as well as the issues and challenges that differentiate scientific data mining from its commercial counterpart. While the focus of the book is on mining scientific data, the work is of broader interest as many of the techniques can be applied equally well to data arising in business and web applications. Audience: This work would be an excellent text for students and researchers who are familiar with the basic principles of data mining and want to learn more about the application of data mining to their problem in science or engineering.
Download or read book Tech Mining written by Alan L. Porter and published by John Wiley & Sons. This book was released on 2004-11-26 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tech Mining makes exploitation of text databases meaningful tothose who can gain from derived knowledge about emergingtechnologies. It begins with the premise that we have theinformation, the tools to exploit it, and the need for theresulting knowledge. The information provided puts new capabilities at the hands oftechnology managers. Using the material present, these managers canidentify and access the most valuable technology informationresources (publications, patents, etc.); search, retrieve, andclean the information on topics of interest; and lower the costsand enhance the benefits of competitive technological intelligenceoperations.
Download or read book An Introduction to Mining Science written by John Bridgeford Coppock and published by . This book was released on 1915 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mine Safety Science and Engineering written by Debi Prasad Tripathy and published by CRC Press. This book was released on 2019-08-28 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Mining Engineering operations, mines act as sources of constant danger and risk to the miners and may result in disasters unless mining is done with safety legislations and practices in place. Mine safety engineers promote and enforce mine safety and health by complying with the established safety standards, policies, guidelines and regulations. These innovative and practical methods for ensuring safe mining operations are discussed in this book including technological advancements in the field. It will prove useful as reference for engineering and safety professionals working in the mining industry, regulators, researchers, and students in the field of mining engineering.
Download or read book Mining Science and Technology written by Shirong Ge andGuangli Guo Edited by Yuehan Wang and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mining Science and Technology written by Yuehan Wang and published by CRC Press. This book was released on 2004-09-15 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt: Jointly sponsored by the China University of Mining and Technology and the University of Nottingham, UK, a total of 187 papers have been included in the proceedings, of which fifty-two are contributed by authors outside of China. Scholars and experts from both China and abroad discuss and exchange information on the latest developments in mining sc
Download or read book Human Centered Design for Mining Equipment and New Technology written by Tim Horberry and published by CRC Press. This book was released on 2018-02-07 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces Human-Centered Design (HCD) and outlines the benefits of the approach for mining equipment and new technology. It is a process that aims to make equipment and systems more usable and acceptable by focusing on the end user, their tasks, their work environment, or use context. This process requires that users and other stakeholders are involved throughout the design and development process of the equipment or system. To date, HCD has not been widely applied to the design, development, and deployment of mining equipment or new technology.
Download or read book Mining Science and Technology 1996 written by T.S. Golosinski and published by CRC Press. This book was released on 1996-10-31 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of symposium papers covering all major aspects of mining and related disciplines. Topics include: mining science; environmental and safety technology; mine control; antomation and mechanization; mining geomechanics; mine construction and engineering; and coal processing.
Download or read book Wills Mineral Processing Technology written by Barry A. Wills and published by Elsevier. This book was released on 2011-04-18 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wills' Mineral Processing Technology provides practising engineers and students of mineral processing, metallurgy and mining with a review of all of the common ore-processing techniques utilized in modern processing installations. Now in its Seventh Edition, this renowned book is a standard reference for the mineral processing industry. Chapters deal with each of the major processing techniques, and coverage includes the latest technical developments in the processing of increasingly complex refractory ores, new equipment and process routes. This new edition has been prepared by the prestigious J K Minerals Research Centre of Australia, which contributes its world-class expertise and ensures that this will continue to be the book of choice for professionals and students in this field.This latest edition highlights the developments and the challenges facing the mineral processor, particularly with regard to the environmental problems posed in improving the efficiency of the existing processes and also in dealing with the waste created. The work is fully indexed and referenced. The classic mineral processing text, revised and updated by a prestigious new team Provides a clear exposition of the principles and practice of mineral processing, with examples taken from practice Covers the latest technological developments and highlights the challenges facing the mineral processor New sections on environmental problems, improving the efficiency of existing processes and dealing with waste.
Download or read book Electromagnetic Compatibility in Underground Mining written by F. Krasucki and published by Elsevier Publishing Company. This book was released on 1993-01-04 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theoretical and technical problems of electromagnetic compatibility (EMC) in mining are covered in this volume. EMC is discussed in three main groups of problems: sources (generation) of interference, propagation of interference in mining conditions, the influence of interferences on mining devices, particularly electronic devices used in deep coal mines. Propagation of interference and its influence on mining communication and signalling systems as well as on control systems of mining machines are discussed. Attention is paid to the influences of interference on dispatching sytems which give to the dispatcher some information about mining hazards. The book will be of interest to mining and electrical engineers.
Download or read book Underground Mining Methods and Technology written by A.B. Szwilski and published by Elsevier. This book was released on 2012-12-02 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains high-quality papers from the principal mining research institutes of the USA, United Kingdom, India and South Africa, thus providing up-to-date coverage of underground mining and technology in the main mining areas of the world. The theme is mining in adverse conditions using state-of-the-art technology. A wide range of problems facing mining engineers is discussed, namely: thick seam working, mining under massive beds, highly productive room and pillar operations, water problems, ventilation, and electronics in longwall mining.
Download or read book Technoscience in History written by Ursula Klein and published by MIT Press. This book was released on 2020-09-22 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: The relationship of the current technosciences and the older engineering sciences, examined through the history of the “useful” sciences in Prussia. Do today's technoscientific disciplines—including materials science, genetic engineering, nanotechnology, and robotics—signal a radical departure from traditional science? In Technoscience in History, Ursula Klein argues that these novel disciplines and projects are not an “epochal break,” but are part of a history that can be traced back to German “useful” sciences and beyond. Klein's account traces a deeper history of technoscience, mapping the relationship between today's cutting-edge disciplines and the development of the useful and technological sciences in Prussia from 1750 to 1850. Klein shows that institutions that coupled natural-scientific and technological inquiry existed well before the twentieth century. Focusing on the science of mining, technical chemistry, the science of forestry, and the science of building (later known as civil engineering), she examines the emergence of practitioners who were recognized as men of science as well as inventive technologists—key figures that she calls “scientific-technological experts.” Klein describes the Prussian state's recruitment of experts for technical projects and manufacturing, including land surveys, the apothecary trade, and porcelain production; state-directed mining, mining science, and mining academies; the history and epistemology of useful science; and the founding of Prussian scientific institutions in the nineteenth century, including the University of Berlin, the Academy of Building, the Technical Deputation, and the Industrial Institute.
Download or read book Mining Science Technology written by and published by . This book was released on 1987 with total page 1440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
