Download or read book Mine Wastes written by Bernd Lottermoser and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's best practice in environmental mine-waste management requires a thorough understanding of the wastes produced. The knowledge of mine wastes represents a new interdisciplinary science and this book provides an introductory, descriptive and analytic overview of the wastes produced in the mineral industry. It describes the characterization, prediction, monitoring, disposal and treatment as well as environmental impacts. Intended for undergraduate courses, it systematically builds the reader’s understanding and knowledge of the wastes produced, their physical and chemical characteristics, and how to deal responsibly with them on a short and long-term basis. The text employs 22 case studies spanning the world’s mineral industry that elucidate best practice and specific challenges in mine-waste management and site rehabilitation.
Download or read book Clean Coal Technologies written by Rajesh Kumar Jyothi and published by Springer Nature. This book was released on 2021-05-10 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of art of the several advanced approaches to beneficiation of coal. The influence of recent technology attains the advantages of processing coal, purification studies, rheological behavior, and the mineral beneficiation. The experts collected in this volume have contributed significantly to the enrichment in the in depth knowledge not only in context of working knowledge, but also future prospects of clean coal technology.
Download or read book Geobiotechnology I written by Axel Schippers and published by Springer. This book was released on 2016-08-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book review series presents current trends in modern biotechnology. The aim is to cover all aspects of this interdisciplinary technology where knowledge, methods and expertise are required from chemistry, biochemistry, microbiology, genetics, chemical engineering and computer science. Volumes are organized topically and provide a comprehensive discussion of developments in the respective field over the past 3-5 years. The series also discusses new discoveries and applications. Special volumes are dedicated to selected topics which focus on new biotechnological products and new processes for their synthesis and purification. In general, special volumes are edited by well-known guest editors. The series editor and publisher will however always be pleased to receive suggestions and supplementary information. Manuscripts are accepted in English.
Download or read book Waste Production and Utilization in the Metal Extraction Industry written by Sehliselo Ndlovu and published by CRC Press. This book was released on 2017-06-27 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasingly stringent environmental regulations and industry adoption of waste minimization guidelines have thus, stimulated the need for the development of recycling and reuse options for metal related waste. This book, therefore, gives an overview of the waste generation, recycle and reuse along the mining, beneficiation, extraction, manufacturing and post-consumer value chain. This book reviews current status and future trends in the recycling and reuse of mineral and metal waste and also details the policy and legislation regarding the waste management, health and environmental impacts in the mining, beneficiation, metal extraction and manufacturing processes. This book is a useful reference for engineers and researchers in industry, policymakers and legislators in governance, and academics on the current status and future trends in the recycling and reuse of mineral and metal waste. Some of the key features of the book are as follows: Holistic approach to waste generation, recycling and reuse along the minerals and metals extraction. Detailed overview of metallurgical waste generation. Practical examples with complete flow sheets, techniques and interventions on waste management. Integrates the technical issues related to efficient resources utilization with the policy and regulatory framework. Novel approach to addressing future commodity shortages.
Download or read book Evolutionary and Revolutionary Technologies for Mining written by National Research Council and published by National Academies Press. This book was released on 2002-03-14 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Office of Industrial Technologies (OIT) of the U. S. Department of Energy commissioned the National Research Council (NRC) to undertake a study on required technologies for the Mining Industries of the Future Program to complement information provided to the program by the National Mining Association. Subsequently, the National Institute for Occupational Safety and Health also became a sponsor of this study, and the Statement of Task was expanded to include health and safety. The overall objectives of this study are: (a) to review available information on the U.S. mining industry; (b) to identify critical research and development needs related to the exploration, mining, and processing of coal, minerals, and metals; and (c) to examine the federal contribution to research and development in mining processes.
Download or read book Microbiology for Minerals Metals Materials and the Environment written by Abhilash and published by CRC Press. This book was released on 2015-02-25 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Better Understand the Connection between Microbiology and the Inorganic WorldMicrobiology for Minerals, Metals, Materials and the Environment links chemical, metallurgical, and other metal inherent systems with microbes, and analyzes the interdependence between them. Specifically intended to underscore the importance of microbes in environmental re
Download or read book Trash or Treasure written by Pardeep Singh and published by Springer Nature. This book was released on with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Agromining Farming for Metals written by Antony van der Ent and published by Springer Nature. This book was released on 2020-12-07 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second and expanded edition of the first book on agromining (phytomining) presents a comprehensive overview of the metal farming & recovery of the agromining production chain. Agromining is an emerging technology that aims to transform the extraction of sources of target elements not accessible by traditional mining and processing techniques. Agromining, which is based on sustainable development, uses hyperaccumulator plants as 'metal crops' farmed on sub-economic soils or minerals wastes to obtain valuable target elements. This volume is edited and authored by the pioneers in the rapidly expanding field of agromining and presents the latest insights and developments in the field. This book provides in-depth information on the global distribution and ecology of hyperaccumulator plants, their biogeochemical pathways, the influence of rhizosphere microbes, the physiology and molecular biology of hyperaccumulation, as well as aspects of propagation and conservation of these unusual plants. It describes the agronomy of metal crops and opportunities for incorporating agromining into rehabilitation and mine closure, including test cases for agromining of nickel, cobalt, manganese, arsenic, selenium, cadmium, zinc, thallium, rare earth elements and platinum group elements. Since the first edition was published, there have successful nickel agromining field trials in the tropics (in Malaysia and Guatemala), and these are presented in a dedicated case study chapter. Other new chapters focus on the processing of bio-ore for elements other than nickel, such as rare earth elements and cadmium, and on agromining from industrial wastes such as tailings, and industrial by-products and sites. Furthermore, the book features two new chapters that provide a comprehensive assessment of accumulation a very wide range elements from the Periodic Table in various plant species around the globe, and a chapter on practical methods for discovery of hyperaccumulator plant species in the field and in the herbarium. This book is of interest to environmental professionals in the minerals industry, government regulators, and academics.
Download or read book Electronic Waste Management and Treatment Technology written by Majeti Narasimha Vara Prasad and published by Butterworth-Heinemann. This book was released on 2019-03-14 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic Waste Management and Treatment Technology applies the latest research for designing waste treatment and disposal strategies. Written for researchers who are exploring this emerging topic, the book begins with a short, but rigorous, discussion of electric waste management that outlines common hazardous materials. such as mercury, lead, silver and flame-retardants. The book also discusses the fate of metals contained in waste electrical and electronic equipment in municipal waste treatment. Materials and methods for the remediation, recycling and treatment of plastic waste collected from waste electrical and electronic equipment (WEEE) are also covered. Finally, the book covers the depollution benchmarks for capacitors, batteries and printed circuit boards from waste electrical and electronic equipment (WEEE) and the recovery of waste printed circuit boards through pyrometallurgy. - Describes depollution benchmarks for capacitors, batteries and printed wiring boards from waste electronics - Covers metals contained in waste electrical and electronic equipment in municipal waste - Provides tactics for the recycling of mixed plastic waste from electrical and electronic equipment
Download or read book A Preliminary Inventory and Assessment of Uranium Resources in Mine Wastes written by International Atomic Energy Agency and published by . This book was released on 2021-06-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Typically, discussions of the uranium production cycle are focused on either the economic extraction of resources, or on the environmental and remediation aspects as parallel aspects in a linear cradle-to-grave process. In this publication, resource evaluation is expanded to the full life of the mine to include evaluation of resources in residual waste products. This is viewed in the context of potential reuse or remining of so-called anthropogenic resources in a circular economy. The publication is intended to not only provide a preliminary inventory of uranium contained in mine wastes including the desirable goal of comprehensive extraction in the (uranium) mining industry, but also to provide an initial framework to integrate this aim with those of environmental and remediation considerations in achieving zero waste.
Download or read book Biomining written by Douglas E. Rawlings and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomining is the use of microorganisms in the recovery of metals from ores. During bioleaching, metals such as copper, nickel or zinc are oxidized through microbial action from the water-insoluble sulfide to the soluble sulfate forms. Although gold is inert to microbial action, microbes can also be used in gold recovery from certain types of ores because as they oxidize the ore, they open up its structure, thereby allowing a gold-solubilizing agent such as cyanide to penetrate the ore. The book describes several industrial bioleaching and biooxidation processes as well as the underlying theory and biology of the microbes involved.
Download or read book Soil pollution a hidden reality written by Food and Agriculture Organization of the United Nations and published by Food & Agriculture Org.. This book was released on 2018-04-30 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents key messages and the state-of-the-art of soil pollution, its implications on food safety and human health. It aims to set the basis for further discussion during the forthcoming Global Symposium on Soil Pollution (GSOP18), to be held at FAO HQ from May 2nd to 4th 2018. The publication has been reviewed by the Intergovernmental Technical Panel on Soil (ITPS) and contributing authors. It addresses scientific evidences on soil pollution and highlights the need to assess the extent of soil pollution globally in order to achieve food safety and sustainable development. This is linked to FAO’s strategic objectives, especially SO1, SO2, SO4 and SO5 because of the crucial role of soils to ensure effective nutrient cycling to produce nutritious and safe food, reduce atmospheric CO2 and N2O concentrations and thus mitigate climate change, develop sustainable soil management practices that enhance agricultural resilience to extreme climate events by reducing soil degradation processes. This document will be a reference material for those interested in learning more about sources and effects of soil pollution.
Download or read book Heavy Metals written by Wim Salomons and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Heavy Metals: Problems and Solutions" is divided into three sections dealing with basic geochemical processes, remediation and case studies. The basic geochemical processes are discussed with respect to mobility in the environment and impact as well as methods to derive guidelines for heavy metals. Remediation focuses on currently available methods to treat contaminated sediments and soils. In addition, it considers the concept of geochemical engineering for remediation of large areas contaminated by metals. A number of case studies of polluted sediments and soils and their environmental impact highlight the principles discussed in the first two sections.
Download or read book Extractive Metallurgy of Niobium written by A.K. Suri and published by Routledge. This book was released on 2017-11-13 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth and development witnessed today in modern science, engineering, and technology owes a heavy debt to the rare, refractory, and reactive metals group, of which niobium is a member. Extractive Metallurgy of Niobium presents a vivid account of the metal through its comprehensive discussions of properties and applications, resources and resource processing, chemical processing and compound preparation, metal extraction, and refining and consolidation. Typical flow sheets adopted in some leading niobium-producing countries for the beneficiation of various niobium sources are presented, and various chemical processes for producing pure forms of niobium intermediates such as chloride, fluoride, and oxide are discussed. The book also explains how to liberate the metal from its intermediates and describes the physico-chemical principles involved. It is an excellent reference for chemical metallurgists, hydrometallurgists, extraction and process metallurgists, and minerals processors. It is also valuable to a wide variety of scientists, engineers, technologists, and students interested in the topic.
Download or read book Trace Elements in Coal written by Robert M. Davidson and published by . This book was released on 1996 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Recycling written by and published by UN. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal recycling is a complex business that is becoming increasingly difficult! Recycling started long ago, when people realized that it was more resource- and cost-efficient than just throwing away the resources and starting all over again. In this report, we discuss how to increase metal-recycling rates - and thus resource efficiency - from both quantity and quality viewpoints. The discussion is based on data about recycling input, and the technological infrastructure and worldwide economic realities of recycling. Decision-makers set increasingly ambitious targets for recycling, but far too much valuable metal today is lost because of the imperfect collection of end-of-life (EoL) products, improper practices, or structural deficiencies within the recycling chain, which hinder achieving our goals of high resource efficiency and resource security, and of better recycling rates.
Download or read book Rare Metal Technology 2020 written by Gisele Azimi and published by Springer Nature. This book was released on 2020-01-20 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from a symposium on extraction of rare metals as well as rare extraction processing techniques used in metal production. Rare metals include strategic metals that are in increasing demand and subject to supply risks. Metals represented include neodymium, dysprosium, scandium and others; platinum group metals including platinum, palladium, iridium, and others; battery related metals including lithium, cobalt, nickel, and aluminum; electronics-related materials including copper and gold; and refectory metals including titanium, niobium, zirconium, and hafnium. Other critical materials such as gallium, germanium, indium and silicon are also included. Papers cover various processing techniques, including but not limited to hydrometallurgy (solvent extraction, ion exchange, precipitation, and crystallization), electrometallurgy (electrorefining and electrowinning), pyrometallurgy, and aeriometallurgy (supercritical fluid extraction). Contributions are focused on primary production as well as secondary production through urban mining and recycling to enable a circular economy. A useful resource for all involved in commodity metal production, irrespective of the major metal Provides knowledge of cross-application among industries Extraction and processing of rare metals that are the main building block of many emerging critical technologies have been receiving significant attention in recent years. The technologies that rely on critical metals are prominent worldwide, and finding a way to extract and supply them effectively is highly desirable and beneficial.
