Download or read book A Study of Structure Stability Using the Finite Element Method and Minimum Weight Design of Composite Panel written by Ali Hasan Suri and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Finite Element Methods For Structural Engineers written by Wail N. Al-Rifaie and published by Finite Element Methods. This book was released on 2008 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the Book: The book presents the basic ideas of the finite element method so that it can be used as a textbook in the curriculum for undergraduate and graduate engineering courses. In the presentation of fundamentals and derivations care had been taken not to use an advanced mathematical approach, rather the use of matrix algebra and calculus is made. Further no effort is being made to include the intricacies of the computer programming aspect, rather the material is presented in a manner so that the readers can understand the basic principles using hand calculations. However, a list of computer codes is given. Several illustrative examples are presented in a detailed stepwise manner to explain the various steps in the application of the method. A fairly comprehensive references list at the end of each chapter is given for additional information and further study. About the Author: Wail N. Al-Rifaie is Professor of Civil Engineering at the University of Technology, Baghdad, Iraq. He obtained his Ph.D. from the University College, Cardiff, U.K. in 1975. Dr. Wail established the Civil Engineering Department at the Engineering College in Baghdad and was the Head for nearly seven years. He received the Telford Premium Prize from the Institution of Civil Engineering (London) in 1976. His main areas of research are: Box girder bridge, folded plate structures, frames and shear walls including dynamic analysis. He is the author of three books on structural analysis in Arabic. Ashok K. Govil is Professor in the Department of Applied Mechanics, Motilal Nehru Regional Engineering College, Allahabad, India and was also Head of the same department for over five years. He obtained B.E. degree in Civil Engineering (1963) from BITS, Pilani, India, and M.S. (1969) and Ph.D., (1977) from the University of Iowa, Iowa City, U.S.A. Dr. Govil`s main areas of research are: Optimal design of structures, fail-safe design of structures, and finite element method. He has written several research papers and technical reports, and developed many computer programmes for optimal design of structures including dynamic analysis and vulnerability reduction.

Download or read book Minimum Weight Design of Structures Via Optimality Criteria written by Jaan Kiusalaas and published by . This book was released on 1972 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: The state of the art of automated structural design through the use of optimality criteria, with emphasis on aerospace applications is reviewed. Constraints on stresses, displacements, and buckling strengths under static loading, as well as lower bound limits on natural frequencies and flutter speeds are presented. It is presumed that the reader is experienced in finite element methods of analysis, but is not familiar with optimal design techniques.

Download or read book Finite Element Design of Concrete Structures written by Guenter Axel Rombach and published by Thomas Telford. This book was released on 2004 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Finite Element Design of Concrete Structures: practical problems and their solutions the author addresses this blind belief in computer results by offering a useful critique that important details are overlooked due to the flood of information from the output of computer calculations. Indeed, errors in the numerical model may lead in extreme cases to structural failures as the collapse of the so-called Sleipner platform has demonstrated.

Download or read book Structural Analysis with the Finite Element Method Linear Statics written by Eugenio Oñate and published by Springer Science & Business Media. This book was released on 2010-02-25 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: STRUCTURAL ANALYSIS WITH THE FINITE ELEMENT METHOD Linear Statics Volume 1 : The Basis and Solids Eugenio Oñate The two volumes of this book cover most of the theoretical and computational aspects of the linear static analysis of structures with the Finite Element Method (FEM). The content of the book is based on the lecture notes of a basic course on Structural Analysis with the FEM taught by the author at the Technical University of Catalonia (UPC) in Barcelona, Spain for the last 30 years. Volume1 presents the basis of the FEM for structural analysis and a detailed description of the finite element formulation for axially loaded bars, plane elasticity problems, axisymmetric solids and general three dimensional solids. Each chapter describes the background theory for each structural model considered, details of the finite element formulation and guidelines for the application to structural engineering problems. The book includes a chapter on miscellaneous topics such as treatment of inclined supports, elastic foundations, stress smoothing, error estimation and adaptive mesh refinement techniques, among others. The text concludes with a chapter on the mesh generation and visualization of FEM results. The book will be useful for students approaching the finite element analysis of structures for the first time, as well as for practising engineers interested in the details of the formulation and performance of the different finite elements for practical structural analysis. STRUCTURAL ANALYSIS WITH THE FINITE ELEMENT METHOD Linear Statics Volume 2: Beams, Plates and Shells Eugenio Oñate The two volumes of this book cover most of the theoretical and computational aspects of the linear static analysis of structures with the Finite Element Method (FEM).The content of the book is based on the lecture notes of a basic course on Structural Analysis with the FEM taught by the author at the Technical University of Catalonia (UPC) in Barcelona, Spain for the last 30 years. Volume 2 presents a detailed description of the finite element formulation for analysis of slender and thick beams, thin and thick plates, folded plate structures, axisymmetric shells, general curved shells, prismatic structures and three dimensional beams. Each chapter describes the background theory for each structural model considered, details of the finite element formulation and guidelines for the application to structural engineering problems Emphasis is put on the treatment of structures with layered composite materials. The book will be useful for students approaching the finite element analysis of beam, plate and shell structures for the first time, as well as for practising engineers interested in the details of the formulation and performance of the different finite elements for practical structural analysis.

Download or read book Steel Structures written by Rolf Kindmann and published by John Wiley & Sons. This book was released on 2012-03-07 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the design of steel structures using finite element methods (FEM) according to the current state of the art in Germany and the rest of Europe. After a short introduction on the basics of the design, this book illustrates the FEM with a focus on internal forces, displacements, critical loads and modal shapes. Next to finite element procedures for linear calculations considering the stress states of normal force, biaxial bending and warping torsion, non-linear calculations and the stability cases of flexural buckling, lateral torsional buckling and plate buckling are concentrated on significantly. In this context, design procedures for stability according to the standard Eurocode 3 is introduced and discussed. In addition, important fundamental issues are covered, such as the determination of cross-section properties as well as the elastic and plastic cross-section resistance. Complementary, finite element procedures for cross sections are dealt with, which will have an increasing importance in future. This book has evolved within the teaching activities of the authors in the lecture Computer-oriented Design of Steel Structures on the Master?s Program Computational Engineering at the University of Bochum. It covers the total variety of demands needed to be discussed for the safe, economic and modern design of steel structures.

Download or read book Optimal Structural Design written by Ronald A. Gellatly and published by . This book was released on 1971 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report considers the state of the art in methods of structural optimization. Mathematical programming based methods, while extremely successful with problems of moderate size tend to become prohibitively costly when applied to large scale structures. A novel approach to the weight optimization of indeterminate structures under multiple loading conditions with strength and displacement constraints has been developed and is presented herein. Using this method significant improvements in computational time have been achieved over direct numerical search methods. In some cases the numbers of iterations required to determine the least weight have been reduced by factors of over 20. The rate of convergence is independent of problem size permitting application to large scale structures. Examples of application of the new approach to a number of problems are included.

Download or read book Introduction to Finite Element Analysis and Design written by Nam-Ho Kim and published by John Wiley & Sons. This book was released on 2018-08-20 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces the basic concepts of FEM in an easy-to-use format so that students and professionals can use the method efficiently and interpret results properly Finite element method (FEM) is a powerful tool for solving engineering problems both in solid structural mechanics and fluid mechanics. This book presents all of the theoretical aspects of FEM that students of engineering will need. It eliminates overlong math equations in favour of basic concepts, and reviews of the mathematics and mechanics of materials in order to illustrate the concepts of FEM. It introduces these concepts by including examples using six different commercial programs online. The all-new, second edition of Introduction to Finite Element Analysis and Design provides many more exercise problems than the first edition. It includes a significant amount of material in modelling issues by using several practical examples from engineering applications. The book features new coverage of buckling of beams and frames and extends heat transfer analyses from 1D (in the previous edition) to 2D. It also covers 3D solid element and its application, as well as 2D. Additionally, readers will find an increase in coverage of finite element analysis of dynamic problems. There is also a companion website with examples that are concurrent with the most recent version of the commercial programs. Offers elaborate explanations of basic finite element procedures Delivers clear explanations of the capabilities and limitations of finite element analysis Includes application examples and tutorials for commercial finite element software, such as MATLAB, ANSYS, ABAQUS and NASTRAN Provides numerous examples and exercise problems Comes with a complete solution manual and results of several engineering design projects Introduction to Finite Element Analysis and Design, 2nd Edition is an excellent text for junior and senior level undergraduate students and beginning graduate students in mechanical, civil, aerospace, biomedical engineering, industrial engineering and engineering mechanics.

Download or read book Finite Element Programs in Structural Engineering and Continuum Mechanics written by Carl T. F. Ross and published by Elsevier. This book was released on 1996-01-01 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridging the gap between theoretical texts and the massive and expensive software packages, this handbook covers finite element programming in a wide range of problems in mechanical, civil, aeronautical and electrical engineering. Comprehensive, it ranges from the static analysis of two- and three-dimensional structures to stress analysis of thick slabs on elastic foundations, and from two- and three- dimensional vibration analysis problems to two-dimensional field problems including heat transfer and acoustic vibrations.The 24 printouts of powerful and valuable engineering computer programs, written in QUICK BASIC, are introduced by a preliminary chapter giving useful hints and formulae intended for structural design. The programs are capable of analysing problems in engineering design and manufacture, with text fully describing how to use the computer programs for their particular problems or tasks. The finite element method is used in all the programs, and the problems for analysis can be of quite complex design and shape and with complex boundary conditions. - Covers finite element programming in a wide range of problems in mechanical, civil, aeronautical and electrical engineering - Ranges from the static analysis of two- and three-dimensional structures to stress analysis of thick slabs on elastic foundations

Download or read book Approximate Multiple Configuration Analysis and Allocation for Least Weight Structural Design written by Robert J. Melosh and published by . This book was released on 1967 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes a rapid reanalysis technique (reducing analysis costs by factors between 2 and 100) and a rapid search procedure (reducing the number of design steps by a factor of 25) for obtaining optimum designs. Reanalysis is an approximate procedure based on extremum energy principles and leading, monotonically, to results as exact as desired. THe desing process is an allocation procedure. Each element of the structure is sized in turn. Optimization is addressed toward least weight design of truss systems with multiple loadings and a discrete set of admissible sizings (materials). The new technique can easily include prestress as a design variable. It can be extended to treat any set of finite elements and is based on use of the force or displacement method or both. Because of the modularity of calculations, it is well suited to computer implementation for multi-element structural systems.

Download or read book Finite Element Analysis of Thin Walled Structures written by Dr J W Bull and published by CRC Press. This book was released on 1988-01-25 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes current developments in finite element analysis and the design of certain types of thin-walled structures. The first three chapters lay the foundations for the development and use of finite elements for thin-walled structures, look at finite elements packages and discuss data input and mesh arrangements. The final four chapters use the finite element method to assist in the solution of thin-walled structure problems. Some of the problems solved include; water and air inflated structures; axisymmetric thin shells; ship structures and offshore structures. This book will be an interest to design engineers, researchers and postgraduates.

Download or read book Structural Analysis with the Finite Element Method Linear Statics written by Eugenio Oñate and published by Springer Science & Business Media. This book was released on 2013-05-13 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: STRUCTURAL ANALYSIS WITH THE FINITE ELEMENT METHOD Linear Statics Volume 1 : The Basis and Solids Eugenio Oñate The two volumes of this book cover most of the theoretical and computational aspects of the linear static analysis of structures with the Finite Element Method (FEM). The content of the book is based on the lecture notes of a basic course on Structural Analysis with the FEM taught by the author at the Technical University of Catalonia (UPC) in Barcelona, Spain for the last 30 years. Volume1 presents the basis of the FEM for structural analysis and a detailed description of the finite element formulation for axially loaded bars, plane elasticity problems, axisymmetric solids and general three dimensional solids. Each chapter describes the background theory for each structural model considered, details of the finite element formulation and guidelines for the application to structural engineering problems. The book includes a chapter on miscellaneous topics such as treatment of inclined supports, elastic foundations, stress smoothing, error estimation and adaptive mesh refinement techniques, among others. The text concludes with a chapter on the mesh generation and visualization of FEM results. The book will be useful for students approaching the finite element analysis of structures for the first time, as well as for practising engineers interested in the details of the formulation and performance of the different finite elements for practical structural analysis. STRUCTURAL ANALYSIS WITH THE FINITE ELEMENT METHOD Linear Statics Volume 2: Beams, Plates and Shells Eugenio Oñate The two volumes of this book cover most of the theoretical and computational aspects of the linear static analysis of structures with the Finite Element Method (FEM).The content of the book is based on the lecture notes of a basic course on Structural Analysis with the FEM taught by the author at the Technical University of Catalonia (UPC) in Barcelona, Spain for the last 30 years. Volume 2 presents a detailed description of the finite element formulation for analysis of slender and thick beams, thin and thick plates, folded plate structures, axisymmetric shells, general curved shells, prismatic structures and three dimensional beams. Each chapter describes the background theory for each structural model considered, details of the finite element formulation and guidelines for the application to structural engineering problems Emphasis is put on the treatment of structures with layered composite materials. The book will be useful for students approaching the finite element analysis of beam, plate and shell structures for the first time, as well as for practising engineers interested in the details of the formulation and performance of the different finite elements for practical structural analysis.

Download or read book Developments in Structural Analysis and Synthesis by Function Minimization written by Lucien A. Schmit (Jr.) and published by . This book was released on 1971 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Function minimization methods in structural analysis and optimum design are discussed. A computer program which implements the energy search method of nonlinear finite element analysis is presented. Several recent weight optimization methods based on finite element analysis are reviewed. Special characteristics of the finite element method relevant to automated design are identified. Some efficient approximate analysis methods for optimization applications are explored. Applications of some of these methods to plane frames and finite-deflection trusses are presented.

Download or read book Minimum Weight Design of a Generic Axisymmetric Inlet written by Shari-Beth Nadell and published by . This book was released on 1996 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanics of Optimal Structural Design written by David W. A. Rees and published by John Wiley & Sons. This book was released on 2009-12-21 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a global climate where engineers are increasingly under pressure to make the most of limited resources, there are huge potential financial and environmental benefits to be gained by designing for minimum weight. With Mechanics of Optimal Structural Design, David Rees brings the original approach of weight optimization to the existing structural design literature, providing a methodology for attaining minimum weight of a range of structures under their working loads. He addresses the current gap in education between formal structural design teaching at undergraduate level and the practical application of this knowledge in industry, describing the analytical techniques that students need to understand before applying computational techniques that can be easy to misuse without this grounding. Shows engineers how to approach structural design for minimum weight in clear, concise terms Contains many new least-weight design techniques, taking into consideration different manners of loading and including new topics that have not previously been considered within the least-weight theme Considers the demands for least-weight road, air and space vehicles for the future Enhanced by illustrative worked examples to enlighten the theory, exercises at the end of each chapter that enable application of the theory covered, and an accompanying website with worked examples and solutions housed at www.wiley.com/go/rees The least-weight analyses of basic structural elements ensure a spread of interest with many applications in mechanical, civil, aircraft and automobile engineering. Consequently, this book fills the gap between the basic material taught at undergraduate level and other approaches to optimum design, for example computer simulations and the finite element method.

Download or read book Bionic Optimization in Structural Design written by Rolf Steinbuch and published by Springer. This book was released on 2015-11-04 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides suggestions on how to start using bionic optimization methods, including pseudo-code examples of each of the important approaches and outlines of how to improve them. The most efficient methods for accelerating the studies are discussed. These include the selection of size and generations of a study’s parameters, modification of these driving parameters, switching to gradient methods when approaching local maxima, and the use of parallel working hardware. Bionic Optimization means finding the best solution to a problem using methods found in nature. As Evolutionary Strategies and Particle Swarm Optimization seem to be the most important methods for structural optimization, we primarily focus on them. Other methods such as neural nets or ant colonies are more suited to control or process studies, so their basic ideas are outlined in order to motivate readers to start using them. A set of sample applications shows how Bionic Optimization works in practice. From academic studies on simple frames made of rods to earthquake-resistant buildings, readers follow the lessons learned, difficulties encountered and effective strategies for overcoming them. For the problem of tuned mass dampers, which play an important role in dynamic control, changing the goal and restrictions paves the way for Multi-Objective-Optimization. As most structural designers today use commercial software such as FE-Codes or CAE systems with integrated simulation modules, ways of integrating Bionic Optimization into these software packages are outlined and examples of typical systems and typical optimization approaches are presented. The closing section focuses on an overview and outlook on reliable and robust as well as on Multi-Objective-Optimization, including discussions of current and upcoming research topics in the field concerning a unified theory for handling stochastic design processes.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 1134 pages. Available in PDF, EPUB and Kindle. Book excerpt: