Download or read book Surfaces with Constant Mean Curvature written by Katsuei Kenmotsu and published by American Mathematical Soc.. This book was released on 2003 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mean curvature of a surface is an extrinsic parameter measuring how the surface is curved in the three-dimensional space. A surface whose mean curvature is zero at each point is a minimal surface, and it is known that such surfaces are models for soap film. There is a rich and well-known theory of minimal surfaces. A surface whose mean curvature is constant but nonzero is obtained when we try to minimize the area of a closed surface without changing the volume it encloses. An easy example of a surface of constant mean curvature is the sphere. A nontrivial example is provided by the constant curvature torus, whose discovery in 1984 gave a powerful incentive for studying such surfaces. Later, many examples of constant mean curvature surfaces were discovered using various methods of analysis, differential geometry, and differential equations. It is now becoming clear that there is a rich theory of surfaces of constant mean curvature. In this book, the author presents numerous examples of constant mean curvature surfaces and techniques for studying them. Many finely rendered figures illustrate the results and allow the reader to visualize and better understand these beautiful objects. The book is suitable for advanced undergraduates, graduate students and research mathematicians interested in analysis and differential geometry.
Download or read book A Course in Minimal Surfaces written by Tobias Holck Colding and published by American Mathematical Society. This book was released on 2024-01-18 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Minimal surfaces date back to Euler and Lagrange and the beginning of the calculus of variations. Many of the techniques developed have played key roles in geometry and partial differential equations. Examples include monotonicity and tangent cone analysis originating in the regularity theory for minimal surfaces, estimates for nonlinear equations based on the maximum principle arising in Bernstein's classical work, and even Lebesgue's definition of the integral that he developed in his thesis on the Plateau problem for minimal surfaces. This book starts with the classical theory of minimal surfaces and ends up with current research topics. Of the various ways of approaching minimal surfaces (from complex analysis, PDE, or geometric measure theory), the authors have chosen to focus on the PDE aspects of the theory. The book also contains some of the applications of minimal surfaces to other fields including low dimensional topology, general relativity, and materials science. The only prerequisites needed for this book are a basic knowledge of Riemannian geometry and some familiarity with the maximum principle.
Download or read book Constant Mean Curvature Surfaces in Homogeneous Manifolds written by Julia Plehnert and published by Logos Verlag Berlin GmbH. This book was released on 2012 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this dissertation new constant mean curvature surfaces in homogeneous 3-manifolds are constructed. They arise as sister surfaces of Plateau solutions. The first example, a two-parameter family of MC H surfaces in ∑(k) x R with H ∈ [0,1/2] and k + 4H2 ≤ 0, has genus 0,2 k ends and k-fold dihedral symmetry, k ≥ 2. The existence of the minimal sister follows from the construction of a mean convex domain. The projection of the domain is non-convex. The second example is an MC 1/2 surface in H2 ∈ R with k ends, genus 1 and k-fold dihedral symmetry, k ≥ 3. One has to solve two period problems in the construction. The first period guarantees that the surface has exactly one horizontal symmetry. For the second period the control of a horizontal mirror curve proves the dihedral symmetry. For H=1/2 all surfaces are Alexandrov-embedded.
Download or read book Modern Differential Geometry of Curves and Surfaces with Mathematica written by Elsa Abbena and published by CRC Press. This book was released on 2017-09-06 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting theory while using Mathematica in a complementary way, Modern Differential Geometry of Curves and Surfaces with Mathematica, the third edition of Alfred Gray’s famous textbook, covers how to define and compute standard geometric functions using Mathematica for constructing new curves and surfaces from existing ones. Since Gray’s death, authors Abbena and Salamon have stepped in to bring the book up to date. While maintaining Gray's intuitive approach, they reorganized the material to provide a clearer division between the text and the Mathematica code and added a Mathematica notebook as an appendix to each chapter. They also address important new topics, such as quaternions. The approach of this book is at times more computational than is usual for a book on the subject. For example, Brioshi’s formula for the Gaussian curvature in terms of the first fundamental form can be too complicated for use in hand calculations, but Mathematica handles it easily, either through computations or through graphing curvature. Another part of Mathematica that can be used effectively in differential geometry is its special function library, where nonstandard spaces of constant curvature can be defined in terms of elliptic functions and then plotted. Using the techniques described in this book, readers will understand concepts geometrically, plotting curves and surfaces on a monitor and then printing them. Containing more than 300 illustrations, the book demonstrates how to use Mathematica to plot many interesting curves and surfaces. Including as many topics of the classical differential geometry and surfaces as possible, it highlights important theorems with many examples. It includes 300 miniprograms for computing and plotting various geometric objects, alleviating the drudgery of computing things such as the curvature and torsion of a curve in space.
Download or read book Proceedings of the International Congress of Mathematicians 2010 icm 2010 in 4 Volumes Vol I Plenary Lectures and Ceremonies Vols Ii iv Invited Lectures written by and published by World Scientific. This book was released on 2011 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Official Summary of Security Transactions and Holdings Reported to the Securities and Exchange Commission Under the Securities Exchange Act of 1934 and the Public Utility Holding Company Act of 1935 written by United States. Securities and Exchange Commission and published by . This book was released on 1998 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Analytical Surfaces written by S.N. Krivoshapko and published by Springer. This book was released on 2015-02-25 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: This encyclopedia presents an all-embracing collection of analytical surface classes. It provides concise definitions and description for more than 500 surfaces and categorizes them in 38 classes of analytical surfaces. All classes are cross references to the original literature in an excellent bibliography. The encyclopedia is of particular interest to structural and civil engineers and serves as valuable reference for mathematicians.
Download or read book Geometric Analysis written by Joaqun Prez and published by American Mathematical Soc.. This book was released on 2012-07-16 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains research and expository articles from the courses and talks given at the RSME Lluis A. Santalo Summer School, ``Geometric Analysis'', held June 28-July 2, 2010, in Granada, Spain. The goal of the Summer School was to present some of the many advances currently taking place in the interaction between partial differential equations and differential geometry, with special emphasis on the theory of minimal surfaces. This volume includes expository articles about the current state of specific problems involving curvature and partial differential equations, with interactions to neighboring fields such as probability. An introductory, mostly self-contained course on constant mean curvature surfaces in Lie groups equipped with a left invariant metric is provided. The volume will be of interest to researchers, post-docs, and advanced PhD students in the interface between partial differential equations and differential geometry.
Download or read book Handbook of Geometric Analysis written by Lizhen Ji and published by . This book was released on 2008 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Geometric Analysis combines differential equations with differential geometry. An important aspect of geometric analysis is to approach geometric problems by studying differential equations. Besides some known linear differential operators such as the Laplace operator, many differential equations arising from differential geometry are nonlinear. A particularly important example is the Monge-Amperè equation. Applications to geometric problems have also motivated new methods and techniques in differential equations. The field of geometric analysis is broad and has had many striking applications. This handbook of geometric analysis--the first of the two to be published in the ALM series--presents introductions and survey papers treating important topics in geometric analysis, with their applications to related fields. It can be used as a reference by graduate students and by researchers in related areas."--Back cover.
Download or read book Partial Differential Equations on Manifolds written by Robert Everist Greene and published by . This book was released on 1993 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Some Nonlinear Problems in Riemannian Geometry written by Thierry Aubin and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with such important subjects as variational methods, the continuity method, parabolic equations on fiber bundles, ideas concerning points of concentration, blowing-up technique, geometric and topological methods. It explores important geometric problems that are of interest to many mathematicians and scientists but have only recently been partially solved.
Download or read book Lecture Notes on Mean Curvature Flow Barriers and Singular Perturbations written by Giovanni Bellettini and published by Springer. This book was released on 2014-05-13 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the book is to study some aspects of geometric evolutions, such as mean curvature flow and anisotropic mean curvature flow of hypersurfaces. We analyze the origin of such flows and their geometric and variational nature. Some of the most important aspects of mean curvature flow are described, such as the comparison principle and its use in the definition of suitable weak solutions. The anisotropic evolutions, which can be considered as a generalization of mean curvature flow, are studied from the view point of Finsler geometry. Concerning singular perturbations, we discuss the convergence of the Allen–Cahn (or Ginsburg–Landau) type equations to (possibly anisotropic) mean curvature flow before the onset of singularities in the limit problem. We study such kinds of asymptotic problems also in the static case, showing convergence to prescribed curvature-type problems.
Download or read book New Trends in Geometric Analysis written by Antonio Alarcón and published by Springer Nature. This book was released on 2023-11-25 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to provide an overview of some of the progress made by the Spanish Network of Geometric Analysis (REAG, by its Spanish acronym) since its born in 2007. REAG was created with the objective of enabling the interchange of ideas and the knowledge transfer between several Spanish groups having Geometric Analysis as a common research line. This includes nine groups at Universidad Autónoma de Barcelona, Universidad Autónoma de Madrid, Universidad de Granada, Universidad Jaume I de Castellón, Universidad de Murcia, Universidad de Santiago de Compostela and Universidad de Valencia. The success of REAG has been substantiated with regular meetings and the publication of research papers obtained in collaboration between the members of different nodes. On the occasion of the 15th anniversary of REAG this book aims to collect some old and new contributions of this network to Geometric Analysis. The book consists of thirteen independent chapters, all of them authored by current members of REAG. The topics under study cover geometric flows, constant mean curvature surfaces in Riemannian and sub-Riemannian spaces, integral geometry, potential theory and Riemannian geometry, among others. Some of these chapters have been written in collaboration between members of different nodes of the network, and show the fruitfulness of the common research atmosphere provided by REAG. The rest of the chapters survey a research line or present recent progresses within a group of those forming REAG. Surveying several research lines and offering new directions in the field, the volume is addressed to researchers (including postdocs and PhD students) in Geometric Analysis in the large.
Download or read book Foliations and the Geometry of 3 Manifolds written by Danny Calegari and published by Clarendon Press. This book was released on 2007-05-17 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique reference, aimed at research topologists, gives an exposition of the 'pseudo-Anosov' theory of foliations of 3-manifolds. This theory generalizes Thurston's theory of surface automorphisms and reveals an intimate connection between dynamics, geometry and topology in 3 dimensions. Significant themes returned to throughout the text include the importance of geometry, especially the hyperbolic geometry of surfaces, the importance of monotonicity, especially in 1-dimensional and co-dimensional dynamics, and combinatorial approximation, using finite combinatorical objects such as train-tracks, branched surfaces and hierarchies to carry more complicated continuous objects.
Download or read book Two Reports On Harmonic Maps written by James Eells and published by World Scientific. This book was released on 1995-03-29 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Harmonic maps between Riemannian manifolds are solutions of systems of nonlinear partial differential equations which appear in different contexts of differential geometry. They include holomorphic maps, minimal surfaces, σ-models in physics. Recently, they have become powerful tools in the study of global properties of Riemannian and Kählerian manifolds.A standard reference for this subject is a pair of Reports, published in 1978 and 1988 by James Eells and Luc Lemaire.This book presents these two reports in a single volume with a brief supplement reporting on some recent developments in the theory. It is both an introduction to the subject and a unique source of references, providing an organized exposition of results spread throughout more than 800 papers.
Download or read book Visualization and Mathematics III written by Hans-Christian Hege and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of state-of-the-art presentations on visualization problems in mathematics, fundamental mathematical research in computer graphics, and software frameworks for the application of visualization to real-world problems. Contributions have been written by leading experts and peer-refereed by an international editorial team. The book grew out of the third international workshop ‘Visualization and Mathematics’, May 22-25, 2002 in Berlin. The variety of topics covered makes the book ideal for researcher, lecturers, and practitioners.
