Download or read book Miniaturized Silicon Photodetectors written by Maurizio Casalino and published by MDPI. This book was released on 2021-01-15 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon (Si) technologies provide an excellent platform for the design of microsystems where photonic and microelectronic functionalities are monolithically integrated on the same substrate. In recent years, a variety of passive and active Si photonic devices have been developed, and among them, photodetectors have attracted particular interest from the scientific community. Si photodiodes are typically designed to operate at visible wavelengths, but, unfortunately, their employment in the infrared (IR) range is limited due to the neglectable Si absorption over 1100 nm, even though the use of germanium (Ge) grown on Si has historically allowed operations to be extended up to 1550 nm. In recent years, significant progress has been achieved both by improving the performance of Si-based photodetectors in the visible range and by extending their operation to infrared wavelengths. Near-infrared (NIR) SiGe photodetectors have been demonstrated to have a “zero change” CMOS process flow, while the investigation of new effects and structures has shown that an all-Si approach could be a viable option to construct devices comparable with Ge technology. In addition, the capability to integrate new emerging 2D and 3D materials with Si, together with the capability of manufacturing devices at the nanometric scale, has led to the development of new device families with unexpected performance. Accordingly, this Special Issue of Micromachines seeks to showcase research papers, short communications, and review articles that show the most recent advances in the field of silicon photodetectors and their respective applications.
Download or read book Photodetectors written by and published by Woodhead Publishing. This book was released on 2015-10-24 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photodetectors: Materials, Devices and Applications discusses the devices that convert light to electrical signals, key components in communication, computation, and imaging systems. In recent years, there has been significant improvement in photodetector performance, and this important book reviews some of the key advances in the field. Part one covers materials, detector types, and devices, and includes discussion of silicon photonics, detectors based on reduced dimensional charge systems, carbon nanotubes, graphene, nanowires, low-temperature grown gallium arsenide, plasmonic, Si photomultiplier tubes, and organic photodetectors, while part two focuses on important applications of photodetectors, including microwave photonics, communications, high-speed single photon detection, THz detection, resonant cavity enhanced photodetection, photo-capacitors and imaging. Reviews materials, detector types and devices Addresses fabrication techniques, and the advantages and limitations and different types of photodetector Considers a range of application for this important technology Includes discussions of silicon photonics, detectors based on reduced dimensional charge systems, carbon nanotubes, graphene, nanowires, and more
Download or read book MOEMS and Miniaturized Systems written by and published by . This book was released on 2001 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Photodetectors written by Sanka Gateva and published by BoD – Books on Demand. This book was released on 2012-03-23 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book some recent advances in development of photodetectors and photodetection systems for specific applications are included. In the first section of the book nine different types of photodetectors and their characteristics are presented. Next, some theoretical aspects and simulations are discussed. The last eight chapters are devoted to the development of photodetection systems for imaging, particle size analysis, transfers of time, measurement of vibrations, magnetic field, polarization of light, and particle energy. The book is addressed to students, engineers, and researchers working in the field of photonics and advanced technologies.
Download or read book Internet of Things From Hype to Reality written by Ammar Rayes and published by Springer. This book was released on 2016-10-22 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively describes an end-to-end Internet of Things (IoT) architecture that is comprised of devices, network, compute, storage, platform, applications along with management and security components. It is organized into five main parts, comprising of a total of 11 chapters. Part I presents a generic IoT reference model to establish a common vocabulary for IoT solutions. This includes a detailed description of the Internet protocol layers and the Things (sensors and actuators) as well as the key business drivers to realize the IoT vision. Part II focuses on the IoT requirements that impact networking protocols and provides a layer-by-layer walkthrough of the protocol stack with emphasis on industry progress and key gaps. Part III introduces the concept of Fog computing and describes the drivers for the technology, its constituent elements, and how it relates and differs from Cloud computing. Part IV discusses the IoT services platform, the cornerstone of the solution followed by the Security functions and requirements. Finally, Part V provides a treatment of the topic of connected ecosystems in IoT along with practical applications. It then surveys the latest IoT standards and discusses the pivotal role of open source in IoT. “Faculty will find well-crafted questions and answers at the end of each chapter, suitable for review and in classroom discussion topics. In addition, the material in the book can be used by engineers and technical leaders looking to gain a deep technical understanding of IoT, as well as by managers and business leaders looking to gain a competitive edge and understand innovation opportunities for the future.” Dr. Jim Spohrer, IBM “This text provides a very compelling study of the IoT space and achieves a very good balance between engineering/technology focus and business context. As such, it is highly-recommended for anyone interested in this rapidly-expanding field and will have broad appeal to a wide cross-section of readers, i.e., including engineering professionals, business analysts, university students, and professors.” Professor Nasir Ghani, University of South Florida
Download or read book Microfluidic Technologies for Miniaturized Analysis Systems written by Steffen Hardt and published by Springer Science & Business Media. This book was released on 2007-09-29 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses Lab-on-a-Chip devices. It focuses on microfluidic technologies that have emerged in the past decade. Coverage presents a comprehensive listing of the most promising microfluidic technologies in the Lab-on-a-Chip field. It also details technologies that can be viewed as toolboxes needed to set up complex Lab-on-a-Chip systems.
Download or read book Proceedings of the 2009 Annual Symposium of the IEEE Photonics Benelux Chapter written by S. Beri and published by ASP / VUBPRESS / UPA. This book was released on 2010 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing the proceedings of an annual symposium, this collection of research articles explores the role of optics in lasers, communication systems, sensors, and quantum electronics.
Download or read book Micro and Nanotechnology Enabled Applications for Portable Miniaturized Analytical Systems written by Sabu Thomas and published by Elsevier. This book was released on 2021-10-12 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro- and Nanotechnology Enabled Applications for Portable Miniaturized Analytical Systems outlines the basic principles of miniaturized analytical devices, such as spectrometric, separation, imaging and electrochemical miniaturized instruments. Concepts such as smartphone-enabled miniaturized detection systems and micro/nanomachines are also reviewed. Subsequent chapters explore the emerging application of these mobile devices for miniaturized analysis in various fields, including medicine and biomedicine, environmental chemistry, food chemistry, and forensic chemistry. This is an important reference source for materials scientists and engineers wanting to understand how miniaturization techniques are being used to create a range of efficient, sustainable electronic and optical devices. Miniaturization describes the concept of manufacturing increasingly smaller mechanical, optical, and electronic products and devices. These smaller instruments can be used to produce micro- and nanoscale components required for analytical procedures. A variety of micro/nanoscale materials have been synthesized and used in analytical procedures, such as sensing materials, sorbents, adsorbents, catalysts, and reactors. The miniaturization of analytical instruments can be applied to the different steps of analytical procedures, such as sample preparation, analytical separation, and detection, reducing the total cost of manufacturing the instruments and the needed reagents and organic solvents. - Outlines how miniaturization techniques can be used to create new optical and electronic micro- and nanodevices - Explores major application areas, including biomedicine, environmental science and security - Assesses the major challenges of using miniaturization techniques
Download or read book Introduction to Fluorescence Sensing written by Alexander P. Demchenko and published by Springer Nature. This book was released on 2020-12-01 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides systematic knowledge of basic principles in the design of fluorescence sensing and imaging techniques together with critical analysis of recent developments. Fluorescence is the most popular technique in chemical and biological sensing because of its ultimate sensitivity, high temporal and spatial resolution and versatility that enables imaging within the living cells. It develops rapidly in the directions of constructing new molecular recognition units, new fluorescence reporters and in improving sensitivity of response up to detection of single molecules. Its application areas range from control of industrial processes to environment monitoring and clinical diagnostics. Being a guide for students and young researchers, it also addresses professionals involved in active basic and applied research. Making a strong link between education, research and product development, this book discusses prospects for future progress.
Download or read book Made to Measure written by Philip Ball and published by Princeton University Press. This book was released on 2021-09-14 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Made to Measure introduces a general audience to one of today's most exciting areas of scientific research: materials science. Philip Ball describes how scientists are currently inventing thousands of new materials, ranging from synthetic skin, blood, and bone to substances that repair themselves and adapt to their environment, that swell and flex like muscles, that repel any ink or paint, and that capture and store the energy of the Sun. He shows how all this is being accomplished precisely because, for the first time in history, materials are being "made to measure": designed for particular applications, rather than discovered in nature or by haphazard experimentation. Now scientists literally put new materials together on the drawing board in the same way that a blueprint is specified for a house or an electronic circuit. But the designers are working not with skylights and alcoves, not with transistors and capacitors, but with molecules and atoms. This book is written in the same engaging manner as Ball's popular book on chemistry, Designing the Molecular World, and it links insights from chemistry, biology, and physics with those from engineering as it outlines the various areas in which new materials will transform our lives in the twenty-first century. The chapters provide vignettes from a broad range of selected areas of materials science and can be read as separate essays. The subjects include photonic materials, materials for information storage, smart materials, biomaterials, biomedical materials, materials for clean energy, porous materials, diamond and hard materials, new polymers, and surfaces and interfaces.
Download or read book Design and Implementation of Real Time Multi Sensor Vision Systems written by Vladan Popovic and published by Springer. This book was released on 2017-07-03 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the design of multi-camera systems and their application to fields such as the virtual reality, gaming, film industry, medicine, automotive industry, drones, etc. The authors cover the basics of image formation, algorithms for stitching a panoramic image from multiple cameras, and multiple real-time hardware system architectures, in order to have panoramic videos. Several specific applications of multi-camera systems are presented, such as depth estimation, high dynamic range imaging, and medical imaging.
Download or read book Integrated Nanophotonic Devices written by Zeev Zalevsky and published by Elsevier. This book was released on 2014-06-18 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanophotonics is a newly developing and exciting field, with two main areas of interest: imaging/computer vision and data transport. The technologies developed in the field of nanophotonics have far reaching implications with a wide range of potential applications from faster computing power to medical applications, and "smart" eyeglasses to national security. Integrated Nanophotonic Devices explores one of the key technologies emerging within nanophotonics: that of nano-integrated photonic modulation devices and sensors. The authors introduce the scientific principles of these devices and provide a practical, applications-based approach to recent developments in the design, fabrication and experimentation of integrated photonic modulation circuits. For this second edition, all chapters have been expanded and updated to reflect this rapidly advancing field, and an entirely new chapter has been added to cover liquid crystals integrated with nanostructures. - Unlocks the technologies that will turn the rapidly growing research area of nanophotonics into a major area of commercial development, with applications in telecommunications, computing, security, and sensing - Nano-integrated photonic modulation devices and sensors are the components that will see nanophotonics moving out of the lab into a new generation of products and services - By covering the scientific fundamentals alongside technological applications, the authors open up this important multidisciplinary subject to readers from a range of scientific backgrounds
Download or read book Chemical Analysis and Material Characterization by Spectrophotometry written by Bhim Prasad Kaflé and published by Elsevier. This book was released on 2019-11-29 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Analysis and Material Characterization by Spectrophotometry integrates and presents the latest known information and examples from the most up-to-date literature on the use of this method for chemical analysis or materials characterization. Accessible to various levels of expertise, everyone from students, to practicing analytical and industrial chemists, the book covers both the fundamentals of spectrophotometry and instrumental procedures for quantitative analysis with spectrophotometric techniques. It contains a wealth of examples and focuses on the latest research, such as the investigation of optical properties of nanomaterials and thin solid films. - Covers the basic analytical theory that is essential for understanding spectrophotometry - Emphasizes minor/trace chemical component analysis - Includes the spectrophotometric analysis of nanomaterials and thin solid films - Thoroughly describes methods and uses easy-to-follow, practical examples and experiments
Download or read book Near Infrared Spectroscopy written by Yukihiro Ozaki and published by Springer Nature. This book was released on 2020-11-13 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides knowledge of the basic theory, spectral analysis methods, chemometrics, instrumentation, and applications of near-infrared (NIR) spectroscopy—not as a handbook but rather as a sourcebook of NIR spectroscopy. Thus, some emphasis is placed on the description of basic knowledge that is important in learning and using NIR spectroscopy. The book also deals with applications for a variety of research fields that are very useful for a wide range of readers from graduate students to scientists and engineers in both academia and industry. For readers who are novices in NIR spectroscopy, this book provides a good introduction, and for those who already are familiar with the field it affords an excellent means of strengthening their knowledge about NIR spectroscopy and keeping abreast of recent developments.
Download or read book Sensors and Microsystems written by C. Di Natale and published by World Scientific. This book was released on 2002 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a a selection of the papers presented at the 7th Italian Conference on Sensors and Microsystems, covering challenging topics on strategic areas as automotive, bio-sensors, fundamental chemistry for new generation of material for single molecule recognition.
Download or read book Magnetoelectronics written by Mark Johnson and published by Academic Press. This book was released on 2004 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The arrival of the 'information age' took most people by surprise - including scientists and technologists. Today, research on better, smaller, and faster ways to store and transfer information continues to grow, and growing fast within this scope is the field of magnetoelectronics. With its possibilities as a magnetic storage technology capable of overcoming the vulnerabilities of CMOS (complementary metal on oxide semiconductor), magnetoelectronics promises to be an important installation in the information era.
Download or read book Guided Wave Optical Components and Devices written by Bishnu P. Pal and published by Academic Press. This book was released on 2010-07-19 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guided Wave Optical Components and Devices provides a comprehensive, lucid, and clear introduction to the world of guided wave optical components and devices. Bishnu Pal has collaborated with some of the greatest minds in optics to create a truly inclusive treatise on this contemporary topic. Written by leaders in the field, this book delivers cutting-edge research and essential information for professionals, researchers, and students on emerging topics like microstructured fibers, broadband fibers, polymer fiber components and waveguides, acousto-optic interactions in fibers, higher order mode fibers, nonlinear and parametric process in fibers, revolutionary effects of erbium doped and Raman fiber amplifiers in DWDM and CATV networks, all-fiber network branching component technology platforms like fused fiber couplers, fiber gratings, and side-polished fiber half-couplers, arrayed waveguides, optical MEMS, fiber sensing technologies including safety, civil structural health monitoring, and gyroscope applications. - Accessible introduction to wide range of topics relating to established and emerging optical components - Single-source reference for graduate students in optical engineering and newcomer practitioners, focused on components - Extensive bibliographical information included so readers can get a broad introduction to a variety of optical components and their applications in an optical network
