Download or read book Photostabilization of Polymers written by J.F. Rabek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last two decades, the production of polymers and plastics has been increasing rapidly. In spite of developing new polymers and polymeric materials, only 40-60 are used commercially on a large scale. It has been estimated that half of the annual production of polymers is employed outdoors. Increasing the stability of polymers and plastics towards heat, light, atmospheric oxygen and other environmental agents and weathering conditions has always been a very important problem. The photochemical instability of most of polymers limits them to outdoor application, where they are photo degraded fast over periods ranging from months to a few years. To the despair of technologists and consumers alike, photodegrada tion and environmental ageing of polymers occur much faster than can be expected from knowledge collected in laboratories. In many cases, improved methods of preparation and purification of both monomers and polymers yield products of better quality and higher resistance to heat and light. However, without stabilization of polymers by applica tion of antioxidants (to decrease thermal oxidative degradation) and photostabilizers (to decrease photo-oxidative degradation) it would be impossible to employ polymers and plastics in everyday use.
Download or read book Handbook of Polymer Research written by Richard Arthur Pethrick and published by Nova Publishers. This book was released on 2007 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Polymer Research - Monomers. Oligomers, Polymers & Composites
Download or read book Synthetic Polymers written by D. Feldman and published by Springer Science & Business Media. This book was released on 1996-05-31 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthetic Polymers is a comprehensive introduction to the technologies involved in the synthesis of the main classes of engineering high polymers used in such materials as plastics, fibers, rubbers, foams, adhesives and coatings. Besides the basic processes, this volume includes information on physical, chemical and mechanical characteristics - key factors with respect to obtaining the right end products. It also focuses on the main application of synthetic polymers in different engineering areas and gives data on production and consumption. Over 60 technological flowcharts are presented in a clear and concise manner, to provide the reader with essential information on relevant operations.
Download or read book Papers Presented at the Meeting written by American Chemical Society. Division of Polymer Chemistry and published by . This book was released on 1992 with total page 1274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PVC Degradation and Stabilization written by George Wypych and published by Elsevier. This book was released on 2020-03-11 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: PVC Degradation and Stabilization, Fourth Edition, includes new developments in PVC production, new stabilization methods and mechanisms, new approaches to plasticization, methods of waste reprocessing, accelerated degradation due to electric breakdown, and much more. The book contains all the information necessary for the successful design of stabilization formulas in any PVC-based product. Other topics covered include degradation by thermal energy, UV, gamma and other forms of radiation, chemical degradation, and more. Analytical methods for studying degradative and stabilization processes aid readers in establishing a system for verifying results of stabilization with different stabilizing systems. Many new topics included in this edition are of particular interest today. These comprise new developments in PVC production yielding range of new grades, new stabilization methods and mechanisms (e.g. synergistic mixtures containing hydrotalcites and their synthetic equivalents, beta-diketones, functionalized fillers, Shiff bases), new approaches to plasticization, methods of waste reprocessing (life cycle assessment, reformulation, biodegradable materials, and energy recovery), accelerated degradation due to electric breakdown, and many more - Revised to include cutting-edge research, patent updates and other information required to design successful stabilization in PVC-based products - Covers chemical structure, PVC manufacturing technology, morphology, degradation by thermal energy, mechanodegradation, and more - Includes a chapter on the analytical methods used in studying degradative and stabilization processes - Discusses information on the effects of PVC and its additives on health, safety and the environment
Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1993-10 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bell Laboratories Talks and Papers written by Bell Telephone Laboratories. Libraries and Information Systems Center and published by . This book was released on 1982 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Feedstock Recycling and Pyrolysis of Waste Plastics written by John Scheirs and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pyrolysis is a recycling technique converting plastic waste into fuels, monomers, or other valuable materials by thermal and catalytic cracking processes. It allows the treatment of mixed, unwashed plastic wastes. For many years research has been carried out on thermally converting waste plastics into useful hydrocarbons liquids such as crude oil and diesel fuel. Recently the technology has matured to the point where commercial plants are now available. Pyrolysis recycling of mixed waste plastics into generator and transportation fuels is seen as the answer for recovering value from unwashed, mixed plastics and achieving their desired diversion from landfill. This book provides an overview of the science and technology of pyrolysis of waste plastics. It describes the types of plastics that are suitable for pyrolysis recycling, the mechanism of pyrolytic degradation of various plastics, characterization of the pyrolysis products and details of commercially mature pyrolysis technologies. This book also covers co-pyrolysis technology, including: waste plastic/waste oil, waste plastics/coal, and waste plastics/rubber.
Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Degradation of Polymeric Materials written by Krzysztof Pielichowski and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the thermal degradation of polymers is of paramount importance for developing a rational technology of polymer processing and higher-temperature applications. Controlling degradation requires understanding of many different phenomena, including chemical mechanisms, the influence of polymer morphology, the complexities of oxidation chemistry, and the effects of stabilisers, fillers and other additives. This book offers a wealth of information for polymer researchers and processors requiring an understanding of the implications of thermal degradation on material and product performance.
Download or read book Ecological and Health Effects of Building Materials written by Junaid Ahmad Malik and published by Springer Nature. This book was released on 2021-08-07 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the present adverse effects of using precarious building materials on the ecology and human health. Also, the detailed discussions on the novel and greener construction materials and their utilization as an alternative to the conventional harmful existing methods and materials are also presented in the subsequent chapters. This book helps to fill the research gaps in the existing prior-art knowledge in the field of sustainable construction and green building materials and methods giving due importance to ecology and health, specifically to the fields of sustainable structural engineering, sustainable geotechnical engineering, sustainable road engineering, etc. This book helps in achieving a sustainable environment through possible adoption of innovative and ecological construction practices. Hence, this book acts as a practical workbook, mainly for the academicians and practicing engineers who are willing to work toward the consecrated building industry. It is a well-established fact that the constructions of the engineering structures consume more and more earth resources than any other human activities in the world. In addition, the construction-related activities will produce several million tons of greenhouse gases, toxic emissions, water pollutants, and solid wastes. This creates a huge impact on environment and causes severe health issues on humans and animals. It is thus important to create an eco-friendly construction environment which can satisfy the ecological and health requirements.
Download or read book Thermal Characterization of Polymeric Materials written by Edith Turi and published by Elsevier. This book was released on 2012-12-02 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Characterization of Polymeric Materials is a critical review and a concise evaluation of the application of thermal analysis in polymer science and engineering. This book is divided into nine chapters that specifically tackle the instrumentation, theory, and a wide variety of applications of thermal characterization. The introductory chapters provide an overview of all aspects of thermal analytical methods and apparatus and the theory underlying the basic principles of thermal analysis. These chapters also examine the theories and functions of state for thermometry, dilatometry, thermomechanical analysis, calorimetry, thermogravimetry. These topics are followed by a discussion on single-component and multicomponent systems and their phase transitions, as influenced by concentration, pressure, deformation, molecular weight, and copolymerization. The subsequent chapters explore the influence of important chemical and physical parameters on the glass transition, crystallization, and melting of thermoplastic materials. The discussion then shifts to the theoretical aspects of polymer-polymer compatibility, phase separation, and miscibility in mixed polymer systems. This book further considers the thermal analysis in thermosets, elastomers, and fibers. The concluding chapters present the methods of obtaining information on the relative flammability properties of polymers, for screening fire retardant additives, and for studying the mechanism of flame inhibition. These chapters also look into the thermal analysis of antioxidants, stabilizers, lubricants, plasticizers, impact modifiers, and fire retardants. Polymer scientists and researchers will find this book invaluable.
Download or read book Poly Vinyl Chloride Based Composites and Nanocomposites written by Akhina H and published by Springer Nature. This book was released on 2023-12-06 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers Poly(vinyl chloride) Fundamentals, Fabrication and characterization of PVC based composites and nanocomposites specifically natural fibre reinforced PVC composites, carbonaceous filler reinforced PVC composites , metal oxide fled PVC composites and nanocomposites etc. This book also covers the conducting PVC composites and recent advances in nanocomposites based on PVC .The rheological, mechanical, barrier, thermal, dielectric behaviour of PVC composites and nanocomposites are discussed in details.
Download or read book Fundamentals Properties and Applications of Polymer Nanocomposites written by Joseph H. Koo and published by Cambridge University Press. This book was released on 2016-10-31 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused primarily on polymer nanocomposites, based on the author's research experience as well as open literature. The environmental health and safety aspects of nanomaterials and polymer nanocomposites, risk assessment and safety standards, and fire toxicity of polymer nanocomposites, are studied. In the final chapter, a brief overview of opportunities, trends, and challenges of polymer nanocomposites are included. Throughout the book, the theme is developed that polymer nanocomposites are a whole family of polymeric materials whose properties are capable of being tailored to meet specific applications. This volume serves as a general introduction to students and researchers just entering the field and to scholars from other subfields seeking information.
Download or read book Hybrid Fiber Composites written by Anish Khan and published by John Wiley & Sons. This book was released on 2020-09-28 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber-reinforced composites are exceptionally versatile materials whose properties can be tuned to exhibit a variety of favorable properties such as high tensile strength and resistance against wear or chemical and thermal influences. Consequently, these materials are widely used in various industrial fields such as the aircraft, marine, and automobile industry. After an overview of the general structures and properties of hybrid fiber composites, the book focuses on the manufacturing and processing of these materials and their mechanical performance, including the elucidation of failure mechanisms. A comprehensive chapter on the modeling of hybrid fiber composites from micromechanical properties to macro-scale material behavior is followed by a review of applications of these materials in structural engineering, packaging, and the automotive and aerospace industries.
Download or read book BTL Talks and Papers written by Bell Telephone Laboratories, inc. Technical Information Libraries and published by . This book was released on 1982 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Science written by I. S. Bhardwaj and published by Allied Publishers. This book was released on 1994 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the Polymers '94, a symposium held at Indian Petrochemicals Corporation, Vadodara, February 8-10, 1994.
