Download or read book Microwave Power Engineering written by Ernest C. Okress and published by Academic Press. This book was released on 2013-10-22 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave Power Engineering, Volume 2: Applications introduces the electronics technology of microwave power and its applications. This technology emphasizes microwave electronics for direct power utilization and transmission purposes. This volume presents the accomplishments with respect to components, systems, and applications and their prevailing limitations in the light of knowledge of the microwave power technology. The applications discussed include the microwave heating and other processes of materials, which utilize the magnetron predominantly. Other applications include microwave ionized gases for chemical processing, space (propulsion), and scientific (controlled nuclear fusion) purposes; particle accelerators for scientific, medical, and industrial purposes; military and aerospace for phased array focused microwave energy, experimental vehicle hovering; and dynamics, for experimental microwave motors and experimental waveguide vehicle transport. This text also provides recommendations with respect to what can be done to accelerate a balanced growth of the subject and to attract more creative interest and support.

Download or read book Microwave Power Engineering written by Ernest C. Okress and published by Academic Press. This book was released on 2013-10-22 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave Power Engineering, Volume 1: Generation, Transmission, Rectification considers the components, systems, and applications and the prevailing limitations of the microwave power technology. This book contains four chapters and begins with an introduction to the basic concept and developments of microwave power technology. The second chapter deals with the development of the main classes of high-power microwave and optical frequency power generators, such as magnetrons, crossed-field amplifiers, klystrons, beam plasma amplifiers, crossed-field noise sources, triodes, lasers. The third chapter describes the efficient transmission of high microwave power by means of oversize tubular metallic, surface, beam, and free space beam transmission waveguides. The fourth chapter is devoted to the many different approaches to a microwave rectifier. This book will prove useful to microwave power engineers and researcher who are interested in the application areas of the technology.

Download or read book RF Microwave Engineering and Applications in Energy Systems written by Abdullah Eroglu and published by John Wiley & Sons. This book was released on 2022-05-02 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF/MICROWAVE ENGINEERING AND APPLICATIONS IN ENERGY SYSTEMS An essential text with a unique focus on RF and microwave engineering theory and its applications In RF/Microwave Engineering and Applications in Energy Systems, accomplished researcher Abdullah Eroglu delivers a detailed treatment of key theoretical aspects of radio-frequency and microwave engineering concepts along with parallel presentations of their practical applications. The text includes coverage of recent advances in the subject, including energy harvesting methods, RFID antenna designs, HVAC system controls, and smart grids. The distinguished author provides step-by-step solutions to common engineering problems by way of numerous examples and offers end-of-chapter problems and solutions on each topic. These practical applications of theoretical subjects aid the reader with retention and recall and demonstrate a solid connection between theory and practice. The author also applies common simulation tools in several chapters, illustrating the use and implementation of time domain circuit simulators in conjunction with electromagnetic simulators, as well as Matlab for design, simulation, and implementation at the component and system levels. Readers will also benefit from: A thorough introduction to the foundations of electromagnetics, including line, surface, and volume integrals, vector operation and theorems, and Maxwell’s equations Comprehensive explorations of passive and active components in RF and microwave engineering, including resistors, capacitors, inductors, and semiconductor materials and active devices Practical discussions of transmission lines, including transmission line analysis, Smith charts, microstrip lines, and striplines In-depth examinations of network parameters, including impedance parameters, ABCD parameters, h-Hybrid parameters, and network connections Perfect for senior-level undergraduates and graduate students studying RF or Microwave engineering, RF/Microwave Engineering and Applications in Energy Systems is also an indispensable resource for professionals whose work touches on radio-frequency and microwave technologies.

Download or read book Engineers Handbook of Industrial Microwave Heating written by Roger J. Meredith and published by IET. This book was released on 1998 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete guide, this book presents industrial microwave heating from an engineering base and integrating the essential elements of microwave theory and heat transfer with practical design, application and operational issues.

Download or read book Microwave Power Engineering written by and published by . This book was released on 1968 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microwave Power Engineering written by Ernest C. Okress and published by . This book was released on 1968 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microwave Engineering written by David M. Pozar and published by John Wiley & Sons. This book was released on 2011-11-22 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pozar's new edition of Microwave Engineering includes more material on active circuits, noise, nonlinear effects, and wireless systems. Chapters on noise and nonlinear distortion, and active devices have been added along with the coverage of noise and more material on intermodulation distortion and related nonlinear effects. On active devices, there's more updated material on bipolar junction and field effect transistors. New and updated material on wireless communications systems, including link budget, link margin, digital modulation methods, and bit error rates is also part of the new edition. Other new material includes a section on transients on transmission lines, the theory of power waves, a discussion of higher order modes and frequency effects for microstrip line, and a discussion of how to determine unloaded.

Download or read book Microwave Processing of Materials written by National Research Council and published by National Academies Press. This book was released on 1994-02-01 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwaves can be effectively used in the processing of industrial materials under a wide range of conditions. However, microwave processing is complex and multidisciplinary in nature, and a high degree of technical knowledge is needed to determine how, when, and where the technology can be most profitably utilized. This book assesses the potential of microwave technology for industrial applications, reviews the latest equipment and processing methods, and identifies both the gaps in understanding of microwave processing technology and the promising development opportunities that take advantage of this new technology's unique performance characteristics.

Download or read book Industrial Microwave Heating written by A. C. Metaxas and published by IET. This book was released on 1983 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a broad coverage of the theory and practice of industrial microwave heating. It introduces the physical processes behind dipolar and conductivity loss mechanisms and follows with a thorough presentation of dielectric property data of many industrial materials as a function of the moisture content, temperature and frequency, focussing on the interpretation of such data as regards the suitabiliy for processing these materials with microwave energy. The basic equations which govern the power dissipation, attenuation, phase constant, penetration depth and skin depth are derived from first principles while the transport equations of heat, mass and pressure are qualitatively described, giving particular emphasis to the physical mechanisms behind high frequency drying. The book provides established procedures backed by theoretical formulations for the design of industrial travelling wave and multimode applicators. It also provides extensive coverage of single mode fundamental or higher order resonant cavities and outlines a number of atypical applicator structures. It describes the essential features of processing with microwaves under vacuum and presents a brief introduction to the mechanisms which lead to gas breakdown. It stresses the need for a degree of hybridisation with other electrical or conventional heating systems and discusses a few such schemes. The book outlines a number of systems for limiting leakage from on-line industrial microwave systems and concludes with an extensive discussion of successful industrial applications.

Download or read book RF and Microwave Applications and Systems written by Mike Golio and published by CRC Press. This book was released on 2018-10-03 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, RF and Microwave Applications and Systems, includes a wide range of articles that discuss RF and microwave systems used for communication and radar and heating applications. Commercial, avionics, medical, and military applications are addressed. An overview of commercial communications systems is provided. Past, current, and emerging cellular systems, navigation systems, and satellite-based systems are discussed. Specific voice and data commercial systems are investigated more thoroughly in individual chapters that follow. Detailed discussions of military electronics, avionics, and radar (both military and automotive) are provided in separate chapters. A chapter focusing on FR/microwave energy used for therapeutic medicine is also provided. Systems considerations including thermal, mechanical, reliability, power management, and safety are discussed in separate chapters. Engineering processes are also explored in articles about corporate initiatives, cost modeling, and design reviews. The book closes with a discussion of the underlying physics of electromagnetic propagation and interference. In addition to new chapters on WiMAX and broadband cable, nearly every existing chapter features extensive updates and several were completely rewritten to reflect the massive changes areas such as radio navigation and electronic warfare.

Download or read book Microwave engineering and applications written by Om P. Gandhi and published by . This book was released on 1989-01-01 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Principles and Applications of RF Microwave in Healthcare and Biosensing written by Changzhi Li and published by Academic Press. This book was released on 2016-10-05 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference, written by leading authorities in the field, gives basic theory, implementation details, advanced research, and applications of RF and microwave in healthcare and biosensing. It first provides a solid understanding of the fundamentals with coverage of the basics of microwave engineering and the interaction between electromagnetic waves and biomaterials. It then presents the state-of-the-art development in microwave biosensing, implantable devices -including applications of microwave technology for sensing biological tissues – and medical diagnosis, along with applications involving remote patient monitoring. this book is an ideal reference for RF and microwave engineer working on, or thinking of working on, the applications of RF and Microwave technology in medicine and biology. Learn: The fundamentals of RF and microwave engineering in healthcare and biosensing How to combine biological and medical aspects of the field with underlying engineering concepts How to implement microwave biosensing for material characterization and cancer diagnosis Applications and functioning of wireless implantable biomedical devices and microwave non-contact biomedical radars How to combine devices, systems, and methods for new practical applications The first book to review the fundamentals, latest developments, and future trends in this important emerging field with emphasis on engineering aspects of sensing, monitoring, and diagnosis using RF and Microwave Extensive coverage of biosensing applications are included Written by leaders in the field, including members of the Technical Coordinating Committee of the Biological Effects and Medical Applications of the IEEE Microwave Theory and Techniques Society

Download or read book Microwave Engineering and Systems Applications written by Edward A. Wolff and published by Wiley-Interscience. This book was released on 1988-03-03 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems. Microwave transmission, control, detection, and generation. Microwave measurements. Microwave subsystems.

Download or read book Novel Technologies for Microwave and Millimeter Wave Applications written by Jean-Fu Kiang and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel Technologies for Microwave and Millimeter-Wave Applications provides an overview of current research status in selected field, to facilitate a learning process from concepts to practices, from component design to system architecture, and from small scale to large scale. Each chapter focuses on a topic and is organized to be self-sufficient. Contents in each chapter include concise description of relevant background information, major issues, current trend and future challenges. Useful references are also listed for further reading. Novel Technologies for Microwave and Millimeter-Wave Applications is suitable as a textbook for senior or graduate courses in microwave engineering.

Download or read book Engineers Handbook of Industrial Microwave Heating written by Roger J. Meredith and published by Institution of Engineering & Technology. This book was released on 1998 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete guide, this book presents industrial microwave heating from an engineering base and integrating the essential elements of microwave theory and heat transfer with practical design, application and operational issues.

Download or read book Microwave Electronic Devices written by T.G. Roer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with microwave electronics, that is to say those components of microwave circuits that generate, amplify, detect or modulate signals. It is based on a course given in the Electrical Engineering Department of Eindhoven University since 1985 and on about twenty years of experience in the microwave field. Somewhat to my surprise I found that there were hardly any textbooks that addressed the specific properties and demands of microwave devices, including vacuum devices and their interactions with circuits. Numerous books exist on semiconductor electronic devices, dealing in an excellent way with the basic device physics, but being somewhat brief on typical micro wave aspects. On the other hand there are also many books that concentrate on electromagnetic theory and passive circuits, treating devices without reference to the underlying physics. In between there are some entirely devoted to a particular device, for example, the GaAs MESFET. With regard to tubes the situation is even worse: books that treat the basic principles are usually quite old and modern books often concentrate on specific devices, like high power tubes. So it seems that there is room for a book like this one. Its aim is to provide an elementary understanding ofmicrowave electronic devices, both vacuum and semiconductor, on the one hand in relation to the basic physics underlying their operation and on the other in relation to their circuit applications.

Download or read book Introduction to Electromagnetic and Microwave Engineering written by Paul R. Karmel and published by John Wiley & Sons. This book was released on 1998-01-05 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dies ist in erster Linie ein Lehrbuch und Nachschlagewerk für Studenten aller Bereiche der Elektrotechnik. Für Studienanfänger dient es als Einführung in die Theorie des Elektromagnetismus. Fortgeschrittene Studenten finden darin eine Einführung in die Mikrowellentechnik und deren Anwendungsgebiete. Die elektromagnetische und Mikrowellentechnik wird umfassend behandelt, besonders im Hinblick auf Mikrowellen- und Telekommunikationsanwendungen. Abgesehen von den Standardthemen wird auf elektromagnetisches Rechnen eingegangen auf der Basis von MathCad und finiter Elemente Methode. (01/98)