EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book The Design of Modern Microwave Oscillators for Wireless Applications

Download or read book The Design of Modern Microwave Oscillators for Wireless Applications written by Ulrich L. Rohde and published by John Wiley & Sons. This book was released on 2005-05-27 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Delivering the best possible solution for phase noise and outputpower efficiency in oscillators This complete and thorough analysis of microwave oscillatorsinvestigates all aspects of design, with particular emphasis onoperating conditions, choice of resonators and transistors, phasenoise, and output power. It covers both bipolar transistors andFETs. Following the authors' guidance, readers learn how to designmicrowave oscillators and VCOs that can be tuned over a very widefrequency range, yet have good phase noise, are low cost, and aresmall in size. All the essential topics in oscillator design anddevelopment are covered, including: * Device and resonator technology * Study of noise sources * Analysis methods * Design, calculation, and optimization methodologies * Practical design of single and coupled oscillators While most of the current literature in the field concentrates onclassic design strategies based on measurements, simulation, andoptimization of output power and phase noise, this text offers aunique approach that focuses on the complete understanding of thedesign process. The material demonstrates important design rulesstarting with the selection of best oscillator topology, choice oftransistors, and complete phase noise analysis that leads tooptimum performance of all relevant oscillator features. Alsoincluded are CMOS oscillators, which recently have become importantin cellular applications. For readers interested in specializedapplications and topics, a full chapter provides all the necessaryreferences. The contents of the text fall into two major categories: * Chapters 1 through 9 deal with a very detailed and expandedsingle resonator oscillator, including a thorough treatment of bothnonlinear analysis and phase noise * Chapters 10 and 11 use the knowledge obtained and apply it tomultiple coupled oscillators (synchronized oscillators) This text is partially based on research sponsored by the DefenseAdvanced Research Projects Agency (DARPA) and the United StatesArmy and conducted by Synergy Microwave Corporation. With thewealth of information provided for the analysis and practicaldesign of single and synchronized low-noise microwave oscillators,it is recommended reading for all RF microwave engineers. Inaddition, the text's comprehensive, step-by-step approach makes itan excellent graduate-level textbook.

Book Microwave and Wireless Synthesizers

Download or read book Microwave and Wireless Synthesizers written by Ulrich L. Rohde and published by John Wiley & Sons. This book was released on 1997-08-25 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past decade, great strides have been made in the technology of microwave oscillators and synthesizers, with digital frequency synthesizers in particular attracting much attention. These synthesizers are now being used in virtually all modern signal generators and radio communication equipment. Until now, however, detailed information about their design has been hard to come by-much of it scattered through journal articles-and most books on the subject have taken a primarily theoretical approach. Enter Microwave and Wireless Synthesizers-the first book to emphasize both practical circuit information from RF to millimeter-wave frequencies and up-to-date theory. Based on course material taught by author Ulrich L. Rohde at George Washington University and recent work done by the author at Compact Software, Inc. and Synergy Microwave Corporation, this volume is a complete revision and update of Rohde's landmark text, Digital PLL Frequency Synthesizers: Theory and Design. While it provides all the necessary theory and formulas, it also offers an in-depth look at the practical side of the phase-lock loop (PLL) in synthesizers-including special loops, loop components, and practical circuits-material that is not available in any other book. Rohde explains loop fundamentals, demonstrates the linear approach to oscillator phase noise, discusses the digital direct synthesizer technique, addresses low noise oscillator design, and provides insight into the role and design of crystal oscillators, mixers, phase/frequency discriminators, wideband high-gain amplifiers, programmable dividers, and loop filters. He goes on to cover conventional multiloop synthesizers and survey existing state-of-the-art microwave synthesizer applications. Extensive appendices review the mathematics of useful functions and various applications, including even the complex nonlinear theory of noise in large signal systems such as mixers and oscillators. Microwave and Wireless Synthesizers allows anyone with a PC running either Windows 3.11 or Windows NT to explore real-world design. It uses programs for the solution of digital phase-lock loop systems, tabulates the results, and shows how Bode diagrams are determined by the computer's graphic capabilities. It also includes examples using commercially available linear and nonlinear CAD programs to provide accurate evaluation and optimization of oscillators and other useful circuits and many practical charts. For companies involved in test and communication equipment, this book reduces design and research costs by providing a large number of proven circuits and expediting the design process. It is also an outstanding senior/graduate level textbook for electrical engineering students and an invaluable resource for practicing engineers, senior engineers, and managers who would like to be able to evaluate new trends and techniques in the field.

Book Microwave and Wireless Synthesizers

Download or read book Microwave and Wireless Synthesizers written by Ulrich L. Rohde and published by John Wiley & Sons. This book was released on 2021-03-29 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of the leading resource on designing digital frequency synthesizers from microwave and wireless applications, fully updated to reflect the most modern integrated circuits and semiconductors Microwave and Wireless Synthesizers: Theory and Design, Second Edition, remains the standard text on the subject by providing complete and up-to-date coverage of both practical and theoretical aspects of modern frequency synthesizers and their components. Featuring contributions from leading experts in the field, this classic volume describes loop fundamentals, noise and spurious responses, special loops, loop components, multiloop synthesizers, and more. Practical synthesizer examples illustrate the design of a high-performance hybrid synthesizer and performance measurement techniques—offering readers clear instruction on the various design steps and design rules. The second edition includes extensively revised content throughout, including a modern approach to dealing with the noise and spurious response of loops and updated material on digital signal processing and architectures. Reflecting today’s technology, new practical and validated examples cover a combination of analog and digital synthesizers and hybrid systems. Enhanced and expanded chapters discuss implementations of direct digital synthesis (DDS) architectures, the voltage-controlled oscillator (VCO), crystal and other high-Q based oscillators, arbitrary waveform generation, vector signal generation, and other current tools and techniques. Now requiring no additional literature to be useful, this comprehensive, one-stop resource: Provides a fully reviewed, updated, and enhanced presentation of microwave and wireless synthesizers Presents a clear mathematical method for designing oscillators for best noise performance at both RF and microwave frequencies Contains new illustrations, figures, diagrams, and examples Includes extensive appendices to aid in calculating phase noise in free-running oscillators, designing VHF and UHF oscillators with CAD software, using state-of-the-art synthesizer chips, and generating millimeter wave frequencies using the delay line principle Containing numerous designs of proven circuits and more than 500 relevant citations from scientific journal and papers, Microwave and Wireless Synthesizers: Theory and Design, Second Edition, is a must-have reference for engineers working in the field of radio communication, and the perfect textbook for advanced electri

Book Low Phase Noise Microwave Oscillator Design

Download or read book Low Phase Noise Microwave Oscillator Design written by Robert G. Rogers and published by Artech House Publishers. This book was released on 1991 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treats oscillators as the sum of two circuit elements: the active circuit element (including the transistor) and the frequency-determining resonant circuit element. This book provides step-by-step procedures for designing each element in isolation and then combining them to produce the oscillator.

Book Integrated Frequency Synthesizers for Wireless Systems

Download or read book Integrated Frequency Synthesizers for Wireless Systems written by Andrea Leonardo Lacaita and published by Cambridge University Press. This book was released on 2007-06-28 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasingly demanding performance requirements of communications systems, as well as problems posed by the continued scaling of silicon technology, present numerous challenges for the design of frequency synthesizers in modern transceivers. This book contains everything you need to know for the efficient design of frequency synthesizers for today's communications applications. If you need to optimize performance and minimize design time, you will find this book invaluable. Using an intuitive yet rigorous approach, the authors describe simple analytical methods for the design of phase locked loop (PLL) frequency synthesizers using scaled silicon CMOS and bipolar technologies. The entire design process, from system-level specification to layout, is covered comprehensively. Practical design examples are included, and implementation issues are addressed. A key problem-solving resource for practitioners in IC design, the book will also be of interest to researchers and graduate students in electrical engineering.

Book The Physics of Phase noise Mitigation

Download or read book The Physics of Phase noise Mitigation written by William Loh (Ph. D.) and published by . This book was released on 2013 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: The spectral purity of every oscillator system is limited by noise. This thesis explores the physics and measurements of noise fundamental to oscillators operating in the electrical and optical domains. Our analysis leads to a unified theory of phase noise applicable to perturbations whose characteristics are both white and colored. To minimize phase noise, the oscillator delay length must be made long. This principle motivates us to study a recent class of hybrid optoelectronic oscillators (OEOs) that operate based on concepts of microwave-photonic (MWP) gain. The delay of an OEO is made long (1-15 km) by taking advantage of the low losses afforded by optical fiber. Furthermore, the additional sidemodes are suppressed by a process of superhomogeneous gain exhibited by the MWP link. In this work, we demonstrate an OEO comprising of high-power low-noise slab-coupled optical waveguide (SCOW) components. The use of SCOW technology enables low-noise oscillation without the need for additional external amplification. We also show results of a similar system based on a SCOW coupled optoelectronic oscillator (COEO) configuration whose operation resembles that of a regeneratively modelocked laser. Both oscillators achieve phase noise significantly lower than that of conventional free-running microwave oscillators. Our ultimate goal is the monolithic integration of the OEO onto a single chip of InP. Towards that end, we will show our development of a SCOW distributed feedback laser (DFB) as a replacement to the bulky pump laser currently employed in the OEO.

Book Signal

    Book Details:
  • Author :
  • Publisher :
  • Release : 2010
  • ISBN :
  • Pages : 854 pages

Download or read book Signal written by and published by . This book was released on 2010 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Filter Design Solutions for RF systems

Download or read book Filter Design Solutions for RF systems written by Leonardo Pantoli and published by MDPI. This book was released on 2020-11-19 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue focuses on the state-of-the-art results from the definition and design of filters for low- and high-frequency applications and systems. Different technologies and solutions are commonly adopted for filter definition, from electrical to electromechanical and mechanical solutions, from passive to active devices, and from hybrid to integrated designs. Aspects related to both theoretical and experimental research in filter design, CAD modeling and novel technologies and applications, as well as filter fabrication, characterization and testing, are covered. The proposed research articles deal with different topics as follows: Modeling, design and simulation of filters; Processes and fabrication technologies for filters; Automated characterization and test of filters; Voltage and current mode filters; Integrated and discrete filters; Passive and active filters; Variable filters, characterization and tunability.

Book Wireless Radio Frequency Standards and System Design  Advanced Techniques

Download or read book Wireless Radio Frequency Standards and System Design Advanced Techniques written by Cornetta, Gianluca and published by IGI Global. This book was released on 2012-01-31 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio-frequency (RF) integrated circuits in CMOS technology are gaining increasing popularity in the commercial world, and CMOS technology has become the dominant technology for applications such as GPS receivers, GSM cellular transceivers, wireless LAN, and wireless short-range personal area networks based on IEEE 802.15.1 (Bluetooth) or IEEE 802.15.4 (ZigBee) standards. Furthermore, the increasing interest in wireless technologies and the widespread of wireless communications has prompted an ever increasing demand for radio frequency transceivers. Wireless Radio-Frequency Standards and System Design: Advanced Techniques provides perspectives on radio-frequency circuit and systems design, covering recent topics and developments in the RF area. Exploring topics such as LNA linearization, behavioral modeling and co-simulation of analog and mixed-signal complex blocks for RF applications, integrated passive devices for RF-ICs and baseband design techniques and wireless standards, this is a comprehensive reference for students as well as practicing professionals.

Book Advances in Systems Engineering

Download or read book Advances in Systems Engineering written by Henry Selvaraj and published by Springer Nature. This book was released on 2023-08-03 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 30th International Conference on Systems Engineering held at the University of Nevada, Las Vegas (UNLV), USA, during August 22-24, 2023. Research in the discipline of Systems Engineering is an important concept in the advancement of engineering and information sciences. Systems Engineering attempts to integrate many of the traditional engineering disciplines to solve large complex functioning engineering systems, dependent on components from all the disciplines. The research papers contained in these proceedings reflect the state of the art in systems engineering from all over the world and should serve as vital references to researchers to follow. The topics covered in this book include AeroSpace Systems, Cyber-Physical Systems, Autonomous Systems, Sensor Networks, Machine Learning and Analytics, Internet of Things, Applied Media Informatics and Technology, Control Systems, Energy Systems, Automotive Systems, Biological Systems, Vehicular Networking and Connected Vehicles, Aerospace Systems, Automation, Manufacturing, Smart Grids, Nonlinear Systems, Power Systems, Robotics, Social Systems, Economic Systems, and others. This book is a very good resource for graduate students, researchers, and scholars who want to learn about the most recent development in the fields.

Book Millimeter wave Integrated Technologies in the Era of the Fourth Industrial Revolution

Download or read book Millimeter wave Integrated Technologies in the Era of the Fourth Industrial Revolution written by Wynand Lambrechts and published by Springer Nature. This book was released on 2020-06-20 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This peer-reviewed book explores the technologies driving broadband internet connectivity in the fourth industrial revolution (Industry 4.0). It particularly focuses on potential solutions to introduce these technologies in emerging markets and rural areas, regions that typically form part of the digital divide and often have under-developed telecommunications infrastructures, a lack of skilled workers, and geographical restrictions that limit broadband connectivity. Research shows that ubiquitous internet access boosts socio-economic growth through innovations in science and technology, with the common goal of bringing positive change to the lives of individuals. Fifth-generation (5G) networks based on millimeter-wave (mm-wave) frequency information transfer have the potential to provide future-proof, affordable and sustainable broadband connectivity in areas where previous-generation mobile networks were unable to do so. This book discusses the principles of various technologies that enable electronic circuits to operate at mm-wave frequencies. It examines the importance of identifying, describing, and analyzing technology from a purely technological standpoint, but also acknowledges and investigates the challenges and limitations of introducing such technologies in emerging markets. Presenting recent research, the book spearheads participation in Industry 4.0 in these areas.

Book RF CMOS Oscillators for Modern Wireless Applications

Download or read book RF CMOS Oscillators for Modern Wireless Applications written by Masoud Babaie and published by River Publishers Circuits and. This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main goal of this book is to bring forth the exciting and innovative RF oscillator structures that demonstrate better phase noise performance, lower cost, and higher power efficiency than currently achievable.

Book Neuromorphic Devices for Brain inspired Computing

Download or read book Neuromorphic Devices for Brain inspired Computing written by Qing Wan and published by John Wiley & Sons. This book was released on 2022-05-16 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the cutting-edge of neuromorphic technologies with applications in Artificial Intelligence In Neuromorphic Devices for Brain-Inspired Computing: Artificial Intelligence, Perception, and Robotics, a team of expert engineers delivers a comprehensive discussion of all aspects of neuromorphic electronics designed to assist researchers and professionals to understand and apply all manner of brain-inspired computing and perception technologies. The book covers both memristic and neuromorphic devices, including spintronic, multi-terminal, and neuromorphic perceptual applications. Summarizing recent progress made in five distinct configurations of brain-inspired computing, the authors explore this promising technology’s potential applications in two specific areas: neuromorphic computing systems and neuromorphic perceptual systems. The book also includes: A thorough introduction to two-terminal neuromorphic memristors, including memristive devices and resistive switching mechanisms Comprehensive explorations of spintronic neuromorphic devices and multi-terminal neuromorphic devices with cognitive behaviors Practical discussions of neuromorphic devices based on chalcogenide and organic materials In-depth examinations of neuromorphic computing and perceptual systems with emerging devices Perfect for materials scientists, biochemists, and electronics engineers, Neuromorphic Devices for Brain-Inspired Computing: Artificial Intelligence, Perception, and Robotics will also earn a place in the libraries of neurochemists, neurobiologists, and neurophysiologists.

Book Japanese Journal of Applied Physics

Download or read book Japanese Journal of Applied Physics written by and published by . This book was released on 2007 with total page 1502 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Symmetry in Complex Network Systems

Download or read book Symmetry in Complex Network Systems written by Visarath In and published by Springer. This book was released on 2017-09-05 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the current gap between the theory of symmetry-based dynamics and its application to model and analyze complex systems. As an alternative approach, the authors use the symmetry of the system directly to formulate the appropriate models, and also to analyze the dynamics. Complex systems with symmetry arise in a wide variety of fields, including communication networks, molecular dynamics, manufacturing businesses, ecosystems, underwater vehicle dynamics, celestial and spacecraft dynamics and continuum mechanics. A general approach for their analysis has been to derive a detailed model of their individual parts, connect the parts and note that the system contains some sort of symmetry, then attempt to exploit this symmetry in order to simplify numerical computations. This approach can result in highly complicated models that are difficult to analyze even numerically. The alternative approach, while nonstandard, is not entirely new among the mathematics community. However, there is much less familiarity with the techniques of symmetry-breaking bifurcation, as they apply to the engineering, design and fabrication, of complex systems, in particular, nonlinear sensor devices with special emphasis on the conceptualization and development of new technologies of magnetic sensors such as fluxgate magnetometers and SQUID (Superconducting Quantum Interference Devices), E-- (electric-field) sensors, and communication and navigation systems that require multiple frequencies of operation, such as radar and antenna devices as well as gyroscopic systems.

Book International Aerospace Abstracts

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt: