Download or read book Modern RF and Microwave Measurement Techniques written by Valeria Teppati and published by Cambridge University Press. This book was released on 2013-06-20 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive, hands-on review of the most up-to-date techniques in RF and microwave measurement, including practical advice on deployment challenges.
Download or read book Handbook of Microwave Component Measurements written by Joel P. Dunsmore and published by John Wiley & Sons. This book was released on 2012-08-15 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state-of-the-art coverage for making measurements on RF and Microwave Components, both active and passive. A perfect reference for R&D and Test Engineers, with topics ranging from the best practices for basic measurements, to an in-depth analysis of errors, correction methods, and uncertainty analysis, this book provides everything you need to understand microwave measurements. With primary focus on active and passive measurements using a Vector Network Analyzer, these techniques and analysis are equally applicable to measurements made with Spectrum Analyzers or Noise Figure Analyzers. The early chapters provide a theoretical basis for measurements complete with extensive definitions and descriptions of component characteristics and measurement parameters. The latter chapters give detailed examples for cases of cable, connector and filter measurements; low noise, high-gain and high power amplifier measurements, a wide range of mixer and frequency converter measurements, and a full examination of fixturing, de-embedding, balanced measurements and calibration techniques. The chapter on time-domain theory and measurements is the most complete treatment on the subject yet presented, with details of the underlying mathematics and new material on time domain gating. As the inventor of many of the methods presented, and with 30 years as a development engineer on the most modern measurement platforms, the author presents unique insights into the understanding of modern measurement theory. Key Features: Explains the interactions between the device-under-test (DUT) and the measuring equipment by demonstrating the best practices for ascertaining the true nature of the DUT, and optimizing the time to set up and measure Offers a detailed explanation of algorithms and mathematics behind measurements and error correction Provides numerous illustrations (e.g. block-diagrams for circuit connections and measurement setups) and practical examples on real-world devices, which can provide immediate benefit to the reader Written by the principle developer and designer of many of the measurement methods described This book will be an invaluable guide for RF and microwave R&D and test engineers, satellite test engineers, radar engineers, power amplifier designers, LNA designers, and mixer designers. University researchers and graduate students in microwave design and test will also find this book of interest.
Download or read book Handbook of Microwave Component Measurements written by Joel P. Dunsmore and published by John Wiley & Sons. This book was released on 2020-06-29 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Microwave Component Measurements Second Edition is a fully updated, complete reference to this topic, focusing on the modern measurement tools, such as a Vector Network Analyzer (VNA), gathering in one place all the concepts, formulas, and best practices of measurement science. It includes basic concepts in each chapter as well as appendices which provide all the detail needed to understand the science behind microwave measurements. The book offers an insight into the best practices for ascertaining the true nature of the device-under-test (DUT), optimizing the time to setup and measure, and to the greatest extent possible, remove the effects of the measuring equipment from that result. Furthermore, the author writes with a simplicity that is easily accessible to the student or new engineer, yet is thorough enough to provide details of measurement science for even the most advanced applications and researchers. This welcome new edition brings forward the most modern techniques used in industry today, and recognizes that more new techniques have developed since the first edition published in 2012. Whilst still focusing on the VNA, these techniques are also compatible with other vendor's advanced equipment, providing a comprehensive industry reference.
Download or read book Microwave Measurements written by R.J. Collier and published by IET. This book was released on 2007-10-24 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the following areas: microwave measurement.
Download or read book On Wafer Microwave Measurements and De embedding written by Errikos Lourandakis and published by Artech House. This book was released on 2016-07-31 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new authoritative resource presents the basics of network analyzer measurement equipment and troubleshooting errors involved in the on-wafer microwave measurement process. This book bridges the gap between theoretical and practical information using real-world practices that address all aspects of on-wafer passive device characterization in the microwave frequency range up to 60GHz. Readers find data and measurements from silicon integrated passive devices fabricated and tested in advance CMOS technologies. Basic circuit equations, terms and fundamentals of time and frequency domain analysis are covered. This book also explores the basics of vector network analyzers (VNA), two port S-parameter measurement routines, signal flow graphs, network theory, error models and VNA calibrations with the use of calibration standards.
Download or read book Microwave and Wireless Measurement Techniques written by Nuno Borges Carvalho and published by Cambridge University Press. This book was released on 2013-10-03 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: From typical metrology parameters for common wireless and microwave components to the implementation of measurement benches, this introduction to metrology contains all the key information on the subject. Using it, readers will be able to: • Interpret and measure most of the parameters described in a microwave component's datasheet • Understand the practical limitations and theoretical principles of instrument operation • Combine several instruments into measurement benches for measuring microwave and wireless quantities. Several practical examples are included, demonstrating how to measure intermodulation distortion, error vector magnitude, S-parameters and large signal waveforms. Each chapter then ends with a set of exercises, allowing readers to test their understanding of the material covered and making the book equally suited for course use and for self-study.
Download or read book Microwave Electronics written by L. F. Chen and published by John Wiley & Sons. This book was released on 2004-11-19 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of high speed, high frequency circuits and systems requires an understanding of the properties of materials functioning at the microwave level. This comprehensive reference sets out to address this requirement by providing guidance on the development of suitable measurement methodologies tailored for a variety of materials and application systems. Bringing together coverage of a broad range of techniques in one publication for the first time, this book: Provides a comprehensive introduction to microwave theory and microwave measurement techniques. Examines every aspect of microwave material properties, circuit design and applications. Presents materials property characterisation methods along with a discussion of the underlying theory. Outlines the importance of microwave absorbers in the reduction in noise levels in microwave circuits and their importance within defence industry applications. Relates each measurement technique to its application across the fields of microwave engineering, high-speed electronics, remote sensing and the physical sciences. This book will appeal to practising engineers and technicians working in the areas of RF, microwaves, communications, solid-state devices and radar. Senior students, researchers in microwave engineering and microelectronics and material scientists will also find this book a very useful reference.
Download or read book Planar Microwave Engineering written by Thomas H. Lee and published by Cambridge University Press. This book was released on 2004-08-30 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern wireless communications hardware is underpinned by RF and microwave design techniques. This insightful book contains a wealth of circuit layouts, design tips, and practical measurement techniques for building and testing practical gigahertz systems. The book covers everything you need to know to design, build, and test a high-frequency circuit. Microstrip components are discussed, including tricks for extracting good performance from cheap materials. Connectors and cables are also described, as are discrete passive components, antennas, low-noise amplifiers, oscillators, and frequency synthesizers. Practical measurement techniques are presented in detail, including the use of network analyzers, sampling oscilloscopes, spectrum analyzers, and noise figure meters. Throughout the focus is practical, and many worked examples and design projects are included. There is also a CD-ROM that contains a variety of design and analysis programs. The book is packed with indispensable information for students taking courses on RF or microwave circuits and for practising engineers.
Download or read book Microwave Measurements written by Edward L Ginzton and published by . This book was released on 2012-04-01 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Microwave Measurements written by Ananjan Basu and published by CRC Press. This book was released on 2014-12-18 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Go Beyond Basic Distributed Circuit AnalysisAn Introduction to Microwave Measurements has been written in a way that is different from many textbooks. As an instructor teaching a master's-level course on microwave measurements, the author recognized that few of today's graduate electrical engineering students are knowledgeable about microwave measu
Download or read book Handbook of Microwave Component Measurements written by Joel P. Dunsmore and published by John Wiley & Sons. This book was released on 2020-05-12 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Microwave Component Measurements Second Edition is a fully updated, complete reference to this topic, focusing on the modern measurement tools, such as a Vector Network Analyzer (VNA), gathering in one place all the concepts, formulas, and best practices of measurement science. It includes basic concepts in each chapter as well as appendices which provide all the detail needed to understand the science behind microwave measurements. The book offers an insight into the best practices for ascertaining the true nature of the device-under-test (DUT), optimizing the time to setup and measure, and to the greatest extent possible, remove the effects of the measuring equipment from that result. Furthermore, the author writes with a simplicity that is easily accessible to the student or new engineer, yet is thorough enough to provide details of measurement science for even the most advanced applications and researchers. This welcome new edition brings forward the most modern techniques used in industry today, and recognizes that more new techniques have developed since the first edition published in 2012. Whilst still focusing on the VNA, these techniques are also compatible with other vendor's advanced equipment, providing a comprehensive industry reference.
Download or read book RF and Microwave Circuits Measurements and Modeling written by Mike Golio and published by CRC Press. This book was released on 2018-10-08 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlighting the challenges RF and microwave circuit designers face in their day-to-day tasks, RF and Microwave Circuits, Measurements, and Modeling explores RF and microwave circuit designs in terms of performance and critical design specifications. The book discusses transmitters and receivers first in terms of functional circuit block and then examines each block individually. Separate articles consider fundamental amplifier issues, low noise amplifiers, power amplifiers for handset applications and high power, power amplifiers. Additional chapters cover other circuit functions including oscillators, mixers, modulators, phase locked loops, filters and multiplexers. New chapters discuss high-power PAs, bit error rate testing, and nonlinear modeling of heterojunction bipolar transistors, while other chapters feature new and updated material that reflects recent progress in such areas as high-volume testing, transmitters and receivers, and CAD tools. The unique behavior and requirements associated with RF and microwave systems establishes a need for unique and complex models and simulation tools. The required toolset for a microwave circuit designer includes unique device models, both 2D and 3D electromagnetic simulators, as well as frequency domain based small signal and large signal circuit and system simulators. This unique suite of tools requires a design procedure that is also distinctive. This book examines not only the distinct design tools of the microwave circuit designer, but also the design procedures that must be followed to use them effectively.
Download or read book Modern Microwave Measurements and Techniques written by Thomas S. Laverghetta and published by Artech House Publishers. This book was released on 1988 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes bibliography and index.
Download or read book Focused Beam Methods written by John W. Schultz and published by John Schultz. This book was released on 2012-10-15 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: Determining the intrinsic microwave properties of materials is important for a variety of applications ranging from antenna and electronic circuit design to remote sensing to electromagnetic interference mitigation. A number of methods exist for characterizing intrinsic properties of materials at microwave frequencies, including transmission lines, resonant cavities, and impedance analysis. The use of free-space measurement methods has become commonplace among microwave material characterization laboratories due to its ease of use and reasonable accuracy. While some free-space facilities exist that can characterize down to 500 MHz, the method is most useful for characterizing materials from 2 GHz through millimeter waves. This book is designed to acquaint engineers and scientists with the theory and practice of using microwave focused beam systems for free-space characterization of materials.
Download or read book Microwave Materials and Applications written by Mailadil T. Sebastian and published by John Wiley & Sons. This book was released on 2017-03-02 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent rapid progress in wireless telecommunication, including the Internet of Things, 5th generation wireless systems, satellite broadcasting, and intelligent transport systems has increased the need for low-loss dielectric materials and modern fabrication techniques. These materials have excellent electrical, dielectric, and thermal properties and have enormous potential, especially in wireless communication, flexible electronics, and printed electronics. Microwave Materials and Applications discusses the methods commonly employed for measuring microwave dielectric properties, the various attempts reported to solve problems of materials chemistry and crystal structure, doping, substitution, and composite formation, highlighting the processing techniques, morphology influences, and applications of microwave materials whilst summarizing many of the recent technical research accomplishments in the area of microwave dielectrics and applications Chapters examine: Oxide ceramics for dielectric resonators and substrates HTCC, LTCC and ULTCC tapes for substrates Polymer ceramic composites for printed circuit boards Elastomer-ceramic composites for flexible electronics Dielectric inks EMI shielding materials Microwave ferrites A comprehensive Appendix presents the fundamental properties for more than 4000 low-loss dielectric ceramics, their composition, crystal structure, and their microwave dielectric properties. Microwave Materials and Applications presents a comprehensive view of all aspects of microwave materials and applications, making it useful for scientists, industrialists, engineers, and students working on current and emerging applications of wireless communications and consumer electronics.
Download or read book Principles of Microwave Measurements written by Geoff H. Bryant and published by IET. This book was released on 1993 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textbook covering a wide range of microwave measurements in the time and frequency domains, including reflectometry, the Smith chart, spectrum analyzers, vector and scalar analyzers, multiports, power, noise, frequency stability, time domain reflectometry, and a comprehensive account of antenna far and near field measurements. For young engineers requiring a good background in microwave measurement principles. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Measurement Instrumentation and Sensors Handbook written by John G. Webster and published by CRC Press. This book was released on 2017-12-19 with total page 1921 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second Edition of the bestselling Measurement, Instrumentation, and Sensors Handbook brings together all aspects of the design and implementation of measurement, instrumentation, and sensors. Reflecting the current state of the art, it describes the use of instruments and techniques for performing practical measurements in engineering, physics, chemistry, and the life sciences and discusses processing systems, automatic data acquisition, reduction and analysis, operation characteristics, accuracy, errors, calibrations, and the incorporation of standards for control purposes. Organized according to measurement problem, the Electromagnetic, Optical, Radiation, Chemical, and Biomedical Measurement volume of the Second Edition: Contains contributions from field experts, new chapters, and updates to all 98 existing chapters Covers sensors and sensor technology, time and frequency, signal processing, displays and recorders, and optical, medical, biomedical, health, environmental, electrical, electromagnetic, and chemical variables A concise and useful reference for engineers, scientists, academic faculty, students, designers, managers, and industry professionals involved in instrumentation and measurement research and development, Measurement, Instrumentation, and Sensors Handbook, Second Edition: Electromagnetic, Optical, Radiation, Chemical, and Biomedical Measurement provides readers with a greater understanding of advanced applications.