Download or read book Microwave Processing of Materials written by National Research Council and published by National Academies Press. This book was released on 1994-02-01 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwaves can be effectively used in the processing of industrial materials under a wide range of conditions. However, microwave processing is complex and multidisciplinary in nature, and a high degree of technical knowledge is needed to determine how, when, and where the technology can be most profitably utilized. This book assesses the potential of microwave technology for industrial applications, reviews the latest equipment and processing methods, and identifies both the gaps in understanding of microwave processing technology and the promising development opportunities that take advantage of this new technology's unique performance characteristics.
Download or read book Microwave Radio Transmission Design Guide written by Trevor Manning and published by Artech House. This book was released on 2009 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly revised second edition provides a current, comprehensive treatment of the subject with a focus on applying practical knowledge to real-world networks. It includes a wealth of important updates, including discussions on backhaul capacity limitations, ethernet over radio, details on the latest cellular radio standards (2.5G, 3G, and 4G). You also learn about recent changes in spectrum management, including the availability of unlicensed bands and new mm band frequencies between 70 and 90 GHz. Additionally, you find more details on the fundamentals of antennas, especially at VHF/UHF levels. Written in an easy-to-understand style, the author provides practical guidelines based on hands-on experience. You find valuable assistance in designing and planning SDH/SONET broadband networks, wireless local loop networks, and backhaul for mobile radio networks. Moreover, this authoritative volume covers frequency planning for radio networks, digital radio equipment characteristics, and fading in radio systems. Using practical case studies, Microwave Radio Transmission Design Guide, Second Edition gives you proven advice that helps you save time and money when developing new networks, and reduces your risk of encountering problems during design and planning.
Download or read book 74 A Microwave Equipment written by General Telephone Company of California. Central office Equipment Training and published by . This book was released on with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Microwave Communication written by George Kizer and published by John Wiley & Sons. This book was released on 2013-06-24 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to cover all engineering aspects of microwave communication path design for the digital age Fixed point-to-point microwave systems provide moderate-capacity digital transmission between well-defined locations. Most popular in situations where fiber optics or satellite communication is impractical, it is commonly used for cellular or PCS site interconnectivity where digital connectivity is needed but not economically available from other sources, and in private networks where reliability is most important. Until now, no book has adequately treated all engineering aspects of microwave communications in the digital age. This important new work provides readers with the depth of knowledge necessary for all the system engineering details associated with fixed point-to-point microwave radio path design: the why, what, and how of microwave transmission; design objectives; engineering methodologies; and design philosophy (in the bid, design, and acceptance phase of the project). Written in an easily accessible format, Digital Microwave Communication features an appendix of specialized engineering details and formulas, and offers up chapter coverage of: A Brief History of Microwave Radio Microwave Radio Overview System Components Hypothetical Reference Circuits Multipath Fading Rain Fading Reflections and Obstructions Network Reliability Calculations Regulation of Microwave Radio Networks Radio Network Performance Objectives Designing and Operating Microwave Systems Antennas Radio Diversity Ducting and Obstruction Fading Digital Receiver Interference Path Performance Calculations Digital Microwave Communication: Engineering Point-to-Point Microwave Systems will be of great interest to engineers and managers who specify, design, or evaluate fixed point-to-point microwave systems associated with communications systems and equipment manufacturers, independent and university research organizations, government agencies, telecommunications services, and other users.
Download or read book Advances in Microwave and Radio Frequency Processing written by M. Willert-Porada and published by Springer Science & Business Media. This book was released on 2007-05-17 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prometheus brought fire to mankind Arthur R. von Hippel “Dielectrics and Waves”, 1954 Our contribution? There are only few areas of research and development of a comparable scientific and technological extension as microwave and high frequency processing. “Pr- essing” means not only application of radiation of 300 MHz to 300 GHz f- quency to synthesis, heating or ionisation of matter but also generation, transm- sion and detection of microwave and radio frequency radiation. Microwave and high frequency sources positioned in the orbit are the foun- tion of modern satellite telecommunication systems, gyrotron tubes being pr- ently developed in different countries all over the world will most probably be the major devices to open up a new era of energy supply to mankind be means of - sion plasma. Although initiated by military purposes during the Second World War (RADAR, Radio Detection and Ranging), microwave and high frequency utilisation has spread over almost every important aspect of normal day life since than, from individual mobile phones and kitchen microwave ovens to industrial food processing, production of composites as sustainable building materials, green chemistry, medical applications and finally infrastructure installations like GPS and Galileo, to name only few examples. These different areas of microwave and high frequency radiation application can not be unified within one group of scientists and technologists. There are s- eral distinguished communities active e.g., in the area of telecommunication s- tems, strong microwaves for fusion plasma or plasma based materials processing.
Download or read book Microwave and Radio Frequency Heating in Food and Beverages written by Tatiana Koutchma and published by Academic Press. This book was released on 2022-10-06 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave and Radio Frequency Heating in Food and Beverages discusses advanced heating techniques based on electromagnetic and electro-technologies, including radiative or microwave (MW) dielectric heating, radio-frequency (RF) or capacitive dielectric heating, infrared (IR) heating, ohmic and magnetic induction heating. Unlike conventional systems where heat energy is transferred from a hot medium to a cooler product resulting in large temperature gradients, electro-heating involves the transfer of electromagnetic energy directly into the product, initiating volumetric heating due to frictional interaction between water molecules and charged ions (i.e., heat is generated within the product). Provides basic principles and mechanisms of electromagnetic heating and microwave Explores microwave and radio-frequency (RF) effects on quality and nutrients in foods Presents the commercial applications of microwave and RF heating in the pasteurization and sterilization of foods and beverages
Download or read book Handbook of Microwave Techniques and Equipment written by Harry Elliot Thomas and published by Prentice Hall. This book was released on 1972 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Microwave Circuits written by Carol Gray Montgomery and published by IET. This book was released on 1987 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a detailed explanation of the development of the impedance concept and its equivalent microwave circuits.
Download or read book Microwave assisted Organic Synthesis written by D. Bogdal and published by Elsevier. This book was released on 2006-01-04 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave-assisted Organic Synthesis: One Hundred Reaction Procedures provides readers with a broad overview of microwave assisted Organic Synthesis, enabling students and researchers alike to produce more efficient and high yield syntheses while saving time and resources. The work addresses key problems faced by chemistry laboratories in academia and in industry, that of an ever increasing need for procedures which are low-waste, energy efficient, high yield, occur over a short reaction period, and use environmentally friendly solvents. All these factors play an important role in the development of Green Chemistry methods, and in this, Microwave-assisted Organic Synthesis: One Hundred Reaction Procedures is an excellent resource for any library. Provides a broad overview of microwave enhanced chemistry Extensive references to the source of each procedure, including equipment used, full operating procedure, and associated hazards Includes exercises and worked problems which can support more independent study
Download or read book On Wafer Microwave Measurements and De embedding written by Errikos Lourandakis and published by Artech House. This book was released on 2016-07-31 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new authoritative resource presents the basics of network analyzer measurement equipment and troubleshooting errors involved in the on-wafer microwave measurement process. This book bridges the gap between theoretical and practical information using real-world practices that address all aspects of on-wafer passive device characterization in the microwave frequency range up to 60GHz. Readers find data and measurements from silicon integrated passive devices fabricated and tested in advance CMOS technologies. Basic circuit equations, terms and fundamentals of time and frequency domain analysis are covered. This book also explores the basics of vector network analyzers (VNA), two port S-parameter measurement routines, signal flow graphs, network theory, error models and VNA calibrations with the use of calibration standards.
Download or read book Engineers Handbook of Industrial Microwave Heating written by Roger J. Meredith and published by IET. This book was released on 1998 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete guide, this book presents industrial microwave heating from an engineering base and integrating the essential elements of microwave theory and heat transfer with practical design, application and operational issues.
Download or read book Electromechanical Coupling Theory Methodology and Applications for High Performance Microwave Equipment written by Baoyan Duan and published by John Wiley & Sons. This book was released on 2022-11-15 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromechanical Coupling Theory, Methodology and Applications for High-Performance Microwave Equipment Electromechanical Coupling Theory, Methodology, and Applications for High-Performance Microwave Equipment is an authoritative and up-to-date guide to the structural, mechanical, and electrical aspects of electromechanical coupling. Addressing control, electromagnetism, and structural engineering, this comprehensive reference covers the electromechanical coupling of high-performance microwave electronic equipment (MEE), such as antennas, radar, large radio telescopes, and telecommunication and navigation equipment. The book is divided into four main sections, beginning with an introduction to electromechanical coupling (EMC) theory and a detailed description of the multi-field coupling model (MFCM) and the influence mechanism (IM) of nonlinear factors of antenna-servo-feeder systems on performance. Subsequent sections discuss MFCM- and IM-based design methodology, EMC-based measurement and testing, computer software for coupling analysis and design of electronic equipment, and various engineering applications of EMC theory and the IM of typical electronic equipment. In addition, the book: Discusses information and data transfer in electromagnetic fields, mechanical and structural deformation fields, and temperature fields Explains how high-performance microwave electronic equipment differs from traditional mechanical equipment Addresses EMC-based and general design-vector based optimization of electronic equipment design Describes applications such as a gun-guided radar system for warships and a large-diameter antenna for moon exploration Includes evaluation criteria to validate MFCM/IM design theory and methodology Electromechanical Coupling Theory, Methodology, and Applications for High-Performance Microwave Equipment is essential reading for circuit designers, microwave engineers, researchers working with high-frequency microwave engineering, and engineers working with integrated circuits in radar, communications, IoT, antenna engineering, and remote sensing.
Download or read book Microwave Line of Sight Link Engineering written by Pablo Angueira and published by John Wiley & Sons. This book was released on 2012-07-25 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to the design, implementation, and operation of line of sight microwave link systems The microwave Line of Sight (LOS) transport network of any cellular operator requires at least as much planning effort as the cellular infrastructure itself. The knowledge behind this design has been kept private by most companies and has not been easy to find. Microwave Line of Sight Link Engineering solves this dilemma. It provides the latest revisions to ITU reports and recommendations, which are not only key to successful design but have changed dramatically in recent years. These include the methodologies related to quality criteria, which the authors address and explain in depth. Combining relevant theory with practical recommendations for such critical planning decisions as frequency band selection, radio channel arrangements, site selection, antenna installation, and equipment choice, this one-stop primer: Describes the procedure for designing a frequency plan and a channel arrangement structure according to ITU current standards, illustrated with specific application examples Offers analytical examples that illustrate the specifics of calculations and provide order of magnitude for parameters and design factors Presents case studies that describe real-life projects, putting together the puzzle pieces necessary when facing a real design created from scratch Microwave Line of Sight Link Engineering is an indispensable resource for radio engineers who need to understand international standards associated with LOS microwave links. It is also extremely valuable for students approaching the topic for the first time.
Download or read book An Introduction to Packet Microwave Systems and Technologies written by Paolo Volpato and published by Artech House. This book was released on 2016-12-31 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a thorough introduction to packet microwave systems and technologies, this unique book focuses on the architecture of microwave networks and the applications of packet microwaves, particularly in mobile backhaul. IP and data technologies which are the key differentiator of packet microwave systems are explored. Microwave applications and packet microwave, including radio equipment chain, full-indoor and outdoor applications, and operational aspects are presented along with packet microwave in hybrid applications and packet technologies for capacity scale. The structure of packet microwave network and mobile backhaul along with a glance at the evolution of packet microwave are discussed. Readers find support for end-to-end design of transmission services in this book.
Download or read book Microwaves and Metals written by Manoj Gupta and published by John Wiley & Sons. This book was released on 2008-02-26 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using microwaves to treat metal-based materials is rapidly emerging as an energy-efficient tool to interact with metals for a number of processes such as sintering, melting, brazing, carburizing and annealing. Microwaves can sinter a wide variety of metal compacts with comparable or enhanced end properties, while at the same time delivering tremendous energy savings over conventional sintering. Microwave processes are therefore gaining increasing attention and adoption in both academia and industry. Gupta and Wong have written this comprehensive text to introduce readers to the world of microwaves and the interaction of microwaves with metals and metals-based formulations. The authors have combined numerous research results from a wide range of sources alongside their own work in the field. Also included are overviews of microwave heating of other non-metal materials and the equipment used for microwave-assisted metallurgy. With microwave techniques poised for widespread adoption, Microwaves and Metals is an essential text for all metallurgists and materials engineers. Provides a thorough grounding in microwave fundamentals and their application to metals processing Informs readers of the latest developments in the field Presents a convenient single source for all aspects of microwave processing of metals and materials Contains liberal illustration to compare and benchmark research results Introduces all the necessary equipment, preparing readers for real-world practice Microwaves and Metals is ideal for a post-graduate or advanced undergraduate course in materials science or metallurgy. Materials and metallurgical engineers in industry, who are keen on cheaper, faster techniques, will also benefit from this book.
Download or read book International Microwave Handbook written by Andy Barter and published by . This book was released on 2002 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Microwave Processing of Foods written by Marc Regier and published by Woodhead Publishing. This book was released on 2016-11-01 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Microwave Processing of Foods, Second Edition, has been updated and extended to include the many developments that have taken place over the past 10 years. Including new chapters on microwave assisted frying, microwave assisted microbial inactivation, microwave assisted disinfestation, this book continues to provide the basic principles for microwave technology, while also presenting current and emerging research trends for future use development. Led by an international team of experts, this book will serve as a practical guide for those interested in applying microwave technology. Provides thoroughly up-to-date information on the basics of microwaves and microwave heating Discusses the main factors for the successful application of microwaves and the main problems that may arise Includes current and potential future applications for real-world application as well as new research and advances Includes new chapters on microwave-assisted frying, microbial inactivation, and disinfestation
