Download or read book Microwave Assisted Synthesis of Silver Vanadium Phosphorus Oxide Ag2VO2PO4 written by and published by . This book was released on 2016 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: We study silver vanadium phosphorus oxide, Ag2VO2PO4, that is a promising cathode material for Li batteries due in part to its large capacity and high current capability. Herein, a new synthesis of Ag2VO2PO4 based on microwave heating is presented, where the reaction time is reduced by approximately 100× relative to other reported methods, and the crystallite size is controlled via synthesis temperature, showing a linear correlation of crystallite size with temperature. Notably, under galvanostatic reduction, the Ag2VO2PO4 sample with the smallest crystallite size delivers the highest capacity and shows the highest loaded voltage. Further, pulse discharge tests show a significant resistance decrease during the initial discharge coincident with the formation of Ag metal. Thus, the magnitude of the resistance decrease observed during pulse tests depends on the Ag2VO2PO4 crystallite size, with the largest resistance decrease observed for the smallest crystallite size. Additional electrochemical measurements indicate a quasi-reversible redox reaction involving Li+ insertion/deinsertion, with capacity fade due to structural changes associated with the discharge/charge process. In summary, this work demonstrates a faster synthetic approach for bimetallic polyanionic materials which also provides the opportunity for tuning of electrochemical properties through control of material physical properties such as crystallite size.
Download or read book Rate Dependency of Silver Vanadium Phosphorous Oxide Reduction written by Po-Jen Cheng and published by . This book was released on 2011 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: The silver vanadium phosphorus oxide (Ag2VO2PO4) is a high-capacity and good-compatibility material for the cathode in the battery. Due to their innovative properties, they are used as cathode in lithium batteries. Therefore, when the lithium batteries begin to discharge, the anodes of the cell perform an electrochemical oxidation and release electrons. In the mean time, the cathodes in the cells perform the electrochemical reduction and catch the electrons. For reduction of Ag2VO2PO4, two silver ions (Ag+) catch two electrons to form silver particles, and the vanadium ions (V5+) catch two electrons to form V3+. It means that four electrons will be released by lithium anode. We call this four electrons discharge as 100% discharge. In my most of the projects, the Ag2VO2PO4 material is tested by differential scanning calorimetry (DSC) to check purity. My study is based on the discharge of batteries, and I focus on the morphology and the intensity of silver particles on the cathode after discharge. Depending on different adjustment of factors, such as discharge time, discharge rate, storage time, storage temperature, I try to investigate the silver intensity, conductivity as a function of DOD (Depth of Discharge). The silver particles could be examined by optical microscope, and scanning electron microscope (SEM). Moreover, I do some x-ray diffraction analysis to quantify the silver particles after discharge. Also, I perform magnetic susceptibility measurement to check the mechanism of the reduction of vanadium ions. Under the research on silver ions and vanadium ions, I will know a big frame of reduction process on silver vanadium phosphorous oxide and the time effect on this cathode material.
Download or read book Microwave assisted Synthesis and Electrochemical Evaluation of VO2 B Nanostructures written by and published by . This book was released on 2015 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding how intercalation materials change during electrochemical operation is paramount to optimising their behaviour and function and in situ characterisation methods allow us to observe these changes without sample destruction. Here, we first report the improved intercalation properties of bronze phase vanadium dioxide VO2 (B) prepared by a microwave assisted route which exhibits a larger electrochemical capacity (232 mAh g-1) compared to VO2 (B) prepared by a solvothermal route (197 mAh g-1). These electrochemical differences have also been followed using in situ X-ray absorption spectroscopy allowing us to follow oxidation state changes as they occur during battery operation.
Download or read book Green Sustainable Process for Chemical and Environmental Engineering and Science written by Rajender Boddula and published by Elsevier. This book was released on 2021-11-17 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green Sustainable Process for Chemical and Environmental Engineering and Science: Switchable Solvents explores the preparation, properties, chemical processes and applications of this class of green solvents. The book provides an in-depth overview on the area of switchable solvents in various industrial applications, focusing on the purification and extraction of chemical compounds utilizing green chemistry protocols that include liquid-liquid, solid-liquid, liquid-gas and lipids separation technologies. In addition, it includes recent advances in greener extraction and separation processes. This book will be an invaluable guide to students, professors, scientists and R&D industrial specialists working in the field of sustainable chemistry, organic, analytical, chemical engineering, environmental and pharmaceutical sciences. - Provides a broad overview of switchable solvents in sustainable chemical processes - Compares the use of switchable solvents as greener solvents over conventional solvents - Outlines eco-friendly organic synthesis and chemical processes using switchable solvents - Lists various industrial separations/extraction processes using switchable solvents
Download or read book Battery Energy Technology General written by J. Weidner and published by The Electrochemical Society. This book was released on 2008-10 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers included in this issue of ECS Transactions were originally presented in the symposium ¿Battery/Energy Technology Joint General Session¿, held during the 212th meeting of The Electrochemical Society, in Washington, DC, from October 7 to 12, 2007.
Download or read book Inorganic Nanostructures written by Petra Reinke and published by John Wiley & Sons. This book was released on 2012-02-29 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph for young researchers and professionals looking for a comprehensive reference offers an advanced treatment of the topic that extends beyond an introductory work. As such, it systematically covers the inorganic nanostructures in the breadth needed, while presenting them together with the surface science tools used to characterize them, such as electron spectroscopy and scanning probe techniques. The unique challenges in the fabrication of nanostructures are illustrated, and set into context of controlling structure, dimensionality and electronic properties.
Download or read book Handbook of Isotopes in the Cosmos written by Donald D. Clayton and published by Cambridge University Press. This book was released on 2003-09-11 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: An information resource about the isotopes and their place in the cosmos.
Download or read book Metal Oxide Nanoparticles 2 Volume Set written by Oliver Diwald and published by John Wiley & Sons. This book was released on 2021-09-14 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles A complete nanoparticle resource for chemists and industry professionals Metal oxide nanoparticles are integral to a wide range of natural and technological processes—from mineral transformation to electronics. Additionally, the fields of engineering, electronics, energy technology, and electronics all utilize metal oxide nanoparticle powders. Metal Oxide Nanoparticles: Formation, Functional Properties, and Interfaces presents readers with the most relevant synthesis and formulation approaches for using metal oxide nanoparticles as functional materials. It covers common processing routes and the assessment of physical and chemical particle properties through comprehensive and complementary characterization methods. This book will serve as an introduction to nanoparticle formulation, their interface chemistry and functional properties at the nanoscale. It will also act as an in-depth resource, sharing detailed information on advanced approaches to the physical, chemical, surface, and interface characterization of metal oxide nanoparticle powders and dispersions. Addresses the application of metal oxide nanoparticles and its economic impact Examines particle synthesis, including the principles of selected bottom-up strategies Explores nanoparticle formulation—a selection of processing and application routes Discusses the significance of particle surfaces and interfaces on structure formation, stability and functional materials properties Covers metal oxide nanoparticle characterization at different length scales With this valuable resource, academic researchers, industrial chemists, and PhD students can all gain insight into the synthesis, properties, and applications of metal oxide nanoparticles.
Download or read book Intercalation Chemistry written by Stanley M Whittingha and published by Elsevier. This book was released on 2012-12-02 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intercalation Chemistry introduces the specialist reader to the breadth of intercalation chemistry and the newcomer to the diverse research opportunities and challenges available in synthetic and reaction chemistry and also in the controlled modification of physical properties. Topics covered range from graphite chemistry to sheet silicate intercalates, diffusion and shape-selective catalysis in zeolites, organic and organometallic intercalation compounds of the transition metal dichalcogenides, and solvated intercalation compounds of layered chalcogenide and oxide bronzes. This book is comprised of 18 chapters and begins with an introduction to intercalation chemistry. The discussions that follow focus on the intercalation chemistry of graphite and of complex oxides with both two (clays and acid phosphates)- and three (zeolites)-dimensional structures, along with organic conversions that have been discovered using essentially smectite (i.e., montmorillonite- and hectorite-based) intercalates. The next chapters focus on ß-aluminas, acid salts of tetravalent metals with layered structure, and layered chalcogenides and halides with simple and hydrated cations as well as organic and organometallic ions. The book also considers the chemistry, thermodynamics, and applications of intermetallic compounds that incorporate hydrogen, intercalation in the context of biological systems, crystallographic shear structures, and intercalation reactions of oxides and chalcogenides of vanadium, molybdenum, and tungsten. The final chapter touches on the physical properties of some intercalation compounds of the dichalcogenides. This book is intended for researchers in the various materials science disciplines.
Download or read book Vanadium written by Alan S. Tracey and published by CRC Press. This book was released on 2007-03-19 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive resource on the chemistry of vanadium, Vanadium: Chemistry, Biochemistry, Pharmacology, and Practical Applications has evolved from over a quarter century of research that concentrated on delineating the aqueous coordination reactions that characterize the vanadium(V) oxidation state. The authors distill information o
Download or read book Impact of Textile Dyes on Public Health and the Environment written by Wani, Khursheed Ahmad and published by IGI Global. This book was released on 2019-11-22 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: As society has become increasingly concerned with the protection and preservation of the environment, many industries have been pushed to comply with new policies and social demands for more environmentally-friendly and sustainable practices and products. However, the textile dyeing industry remains a significant source of complex environmental issues with legislative requirements that often vary in detail and severity concerning the exposure and hazards of potentially harmful chemicals and other associated materials. It is vital that the industry sector involved in the application of dyes continues to be sensitive to potential adverse effects on the environment in its widest sense and respond accordingly. Impact of Textile Dyes on Public Health and the Environment is an essential reference source that focuses on the environmental impact and social responsibility of the dyeing industry. While highlighting topics such as toxicology, bleaching, and greenhouse gases, this publication is ideally designed for chemists, industrialists, non-governmental organization members, environmentalists, fashion designers, clothes manufacturers, scientists, academicians, researchers, students, and practitioners seeking current research on dyeing’s potentially adverse effects on the environment and strategic, effective responses.
Download or read book Proceedings of the Symposium on Microscopic Models of Electrode Electrolyte Interfaces written by Electrochemical Society. Corrosion Division and published by The Electrochemical Society. This book was released on 1993 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrochemical Materials Science written by John Bockris and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is now time for a comprehensive treatise to look at the whole field of electrochemistry. The present treatise was conceived in 1974, and the earliest invitations to authors for contributions were made in 1975. The completion of the early been delayed by various factors. volumes has There has been no attempt to make each article emphasize the most recent situation at the expense of an overall statement of the modern view. This treatise is not a collection of articles from Recent Advances in Electrochemistry or Modern Aspects of Electrochemistry. It is an attempt at making a mature statement about the present position in the vast area of what is best looked at as a new interdisciplinary field. Texas A & M University J. O'M. Bockris University of Ottawa B. E. Conway Case Western Reserve University Ernest Yeager Texas A & M University Ralph E. White Preface to Volume 4 The science of degradation of materials involves a vast area of science and technology, the economic importance of which rivals that of any other clearly defined area affecting the standard of life. The basis of the corrosion process is the electrochemical charge-transfer reaction, and the center of the subject of the degradation of materials is electrochemical material science.
Download or read book Luminescence and Display Materials written by U. Happek and published by The Electrochemical Society. This book was released on 2011-04 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers included in this issue of ECS Transactions were originally presented in the symposia ¿Tutorials in Nanotechnology: Focus on Luminescence and Display Materials¿, ¿Luminescence and Energy Efficiency¿, and ¿ Physics and Chemistry of Luminescence and Display Materials¿ held during the 218th meeting of The Electrochemical Society, in Las Vegas, Nevada, from October 10 to 15, 2010.
Download or read book X Ray Nanoimaging written by and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Chemistries written by Jean-Marie Tarascon and published by Wiley-ISTE. This book was released on 2015-04-06 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrochemical Engineering written by Thomas F. Fuller and published by John Wiley & Sons. This book was released on 2018-03-20 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive Reference for Electrochemical Engineering Theory and Application From chemical and electronics manufacturing, to hybrid vehicles, energy storage, and beyond, electrochemical engineering touches many industries—any many lives—every day. As energy conservation becomes of central importance, so too does the science that helps us reduce consumption, reduce waste, and lessen our impact on the planet. Electrochemical Engineering provides a reference for scientists and engineers working with electrochemical processes, and a rigorous, thorough text for graduate students and upper-division undergraduates. Merging theoretical concepts with widespread application, this book is designed to provide critical knowledge in a real-world context. Beginning with the fundamental principles underpinning the field, the discussion moves into industrial and manufacturing processes that blend central ideas to provide an advanced understanding while explaining observable results. Fully-worked illustrations simplify complex processes, and end-of chapter questions help reinforce essential knowledge. With in-depth coverage of both the practical and theoretical, this book is both a thorough introduction to and a useful reference for the field. Rigorous in depth, yet grounded in relevance, Electrochemical Engineering: Introduces basic principles from the standpoint of practical application Explores the kinetics of electrochemical reactions with discussion on thermodynamics, reaction fundamentals, and transport Covers battery and fuel cell characteristics, mechanisms, and system design Delves into the design and mechanics of hybrid and electric vehicles, including regenerative braking, start-stop hybrids, and fuel cell systems Examines electrodeposition, redox-flow batteries, electrolysis, regenerative fuel cells, semiconductors, and other applications of electrochemical engineering principles Overlapping chemical engineering, chemistry, material science, mechanical engineering, and electrical engineering, electrochemical engineering covers a diverse array of phenomena explained by some of the important scientific discoveries of our time. Electrochemical Engineering provides the critical understanding required to work effectively with these processes as they become increasingly central to global sustainability.
