Download or read book Microwave and Wireless Communications Technology written by Joseph Carr and published by Newnes. This book was released on 1997-01-02 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text offers a practical, device-based approach to the study of microwave and wireless communications. Student objectives, questions and problems, and end-of-chapter summaries are used to reinforce the points made

Download or read book Microwave wireless communications technology written by Joseph J. Carr and published by . This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microwave Wireless Communications written by Antonio Raffo and published by Academic Press. This book was released on 2016-03-01 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: To design and develop fast and effective microwave wireless systems today involves addressing the three different ‘levels’: Device, circuit, and system. This book presents the links and interactions between the three different levels rather than providing just a comprehensive coverage of one specific level. With the aim of overcoming the sectional knowledge of microwave engineers, this will be the first book focused on explaining how the three different levels interact by taking the reader on a journey through the different levels going from the theoretical background to the practical applications. Explains the links and interactions between the three different design levels of wireless communication transmitters: device, circuit, and system Presents state-of-the-art, challenges, and future trends in the field of wireless communication systems Covers all aspects of both mature and cutting-edge technologies for semiconductor devices for wireless communication applications Many circuit designs outlining the limitations derived from the available transistor technologies and system requirements Explains how new microwave measurement techniques can represent an essential tool for microwave modellers and designers

Download or read book RF and Microwave Engineering written by Frank Gustrau and published by John Wiley & Sons. This book was released on 2012-06-22 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a fundamental and practical introduction to radio frequency and microwave engineering and physical aspects of wireless communication In this book, the author addresses a wide range of radio-frequency and microwave topics with emphasis on physical aspects including EM and voltage waves, transmission lines, passive circuits, antennas, radio wave propagation. Up-to-date RF design tools like RF circuit simulation, EM simulation and computerized smith charts, are used in various examples to demonstrate how these methods can be applied effectively in RF engineering practice. Design rules and working examples illustrate the theoretical parts. The examples are close to real world problems, so the reader can directly transfer the methods within the context of their own work. At the end of each chapter a list of problems is given in order to deepen the reader’s understanding of the chapter material and practice the new competences. Solutions are available on the author’s website. Key Features: Presents a wide range of RF topics with emphasis on physical aspects e.g. EM and voltage waves, transmission lines, passive circuits, antennas Uses various examples of modern RF tools that show how the methods can be applied productively in RF engineering practice Incorporates various design examples using circuit and electromagnetic (EM) simulation software Discusses the propagation of waves: their representation, their effects, and their utilization in passive circuits and antenna structures Provides a list of problems at the end of each chapter Includes an accompanying website containing solutions to the problems (http:\\www.fh-dortmund.de\gustrau_rf_textbook) This will be an invaluable textbook for bachelor and masters students on electrical engineering courses (microwave engineering, basic circuit theory and electromagnetic fields, wireless communications). Early-stage RF practitioners, engineers (e.g. application engineer) working in this area will also find this book of interest.

Download or read book Microwave and Millimetre Wave Design for Wireless Communications written by Ian Robertson and published by John Wiley & Sons. This book was released on 2016-06-20 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a full range of contemporary techniques for the design of transmitters and receivers for communications systems operating in the range from 1 through to 300 GHz. In this frequency range there is a wide range of technologies that need to be employed, with silicon ICs at the core but, compared with other electronics systems, a much greater use of more specialist devices and components for high performance – for example, high Q-factor/low loss and good power efficiency. Many text books do, of course, cover these topics but what makes this book timely is the rapid adoption of millimetre-waves (frequencies from 30 to 300 GHz) for a wide range of consumer applications such as wireless high definition TV, “5G” Gigabit mobile internet systems and automotive radars. It has taken many years to develop low-cost technologies for suitable transmitters and receivers, so previously these frequencies have been employed only in expensive military and space applications. The book will cover these modern technologies, with the follow topics covered; transmitters and receivers, lumped element filters, tranmission lines and S-parameters, RF MEMS, RFICs and MMICs, and many others. In addition, the book includes extensive line diagrams to illustrate circuit diagrams and block diagrams of systems, including diagrams and photographs showing how circuits are implemented practically. Furthermore, case studies are also included to explain the salient features of a range of important wireless communications systems. The book is accompanied with suitable design examples and exercises based on the Advanced Design System – the industry leading CAD tool for wireless design. More importantly, the authors have been working with Keysight Technologies on a learning & teaching initiative which is designed to promote access to industry-standard EDA tools such as ADS. Through its University Educational Support Program, Keysight offers students the opportunity to request a student license, backed up with extensive classroom materials and support resources. This culminates with students having the chance to demonstrate their RF/MW design and measurement expertise through the Keysight RF & Microwave Industry-Ready Student Certification Program. www.keysight.com/find/eesof-university www.keysight.com/find/eesof-student-certification

Download or read book History of Wireless written by T. K. Sarkar and published by John Wiley & Sons. This book was released on 2006-01-17 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: Important new insights into how various components and systems evolved Premised on the idea that one cannot know a science without knowing its history, History of Wireless offers a lively new treatment that introduces previously unacknowledged pioneers and developments, setting a new standard for understanding the evolution of this important technology. Starting with the background-magnetism, electricity, light, and Maxwell's Electromagnetic Theory-this book offers new insights into the initial theory and experimental exploration of wireless. In addition to the well-known contributions of Maxwell, Hertz, and Marconi, it examines work done by Heaviside, Tesla, and passionate amateurs such as the Kentucky melon farmer Nathan Stubblefield and the unsung hero Antonio Meucci. Looking at the story from mathematical, physics, technical, and other perspectives, the clearly written text describes the development of wireless within a vivid scientific milieu. History of Wireless also goes into other key areas, including: The work of J. C. Bose and J. A. Fleming German, Japanese, and Soviet contributions to physics and applications of electromagnetic oscillations and waves Wireless telegraphic and telephonic development and attempts to achieve transatlantic wireless communications Wireless telegraphy in South Africa in the early twentieth century Antenna development in Japan: past and present Soviet quasi-optics at near-mm and sub-mm wavelengths The evolution of electromagnetic waveguides The history of phased array antennas Augmenting the typical, Marconi-centered approach, History of Wireless fills in the conventionally accepted story with attention to more specific, less-known discoveries and individuals, and challenges traditional assumptions about the origins and growth of wireless. This allows for a more comprehensive understanding of how various components and systems evolved. Written in a clear tone with a broad scientific audience in mind, this exciting and thorough treatment is sure to become a classic in the field.

Download or read book Digital Microwave Communication written by George Kizer and published by John Wiley & Sons. This book was released on 2013-06-24 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to cover all engineering aspects of microwave communication path design for the digital age Fixed point-to-point microwave systems provide moderate-capacity digital transmission between well-defined locations. Most popular in situations where fiber optics or satellite communication is impractical, it is commonly used for cellular or PCS site interconnectivity where digital connectivity is needed but not economically available from other sources, and in private networks where reliability is most important. Until now, no book has adequately treated all engineering aspects of microwave communications in the digital age. This important new work provides readers with the depth of knowledge necessary for all the system engineering details associated with fixed point-to-point microwave radio path design: the why, what, and how of microwave transmission; design objectives; engineering methodologies; and design philosophy (in the bid, design, and acceptance phase of the project). Written in an easily accessible format, Digital Microwave Communication features an appendix of specialized engineering details and formulas, and offers up chapter coverage of: A Brief History of Microwave Radio Microwave Radio Overview System Components Hypothetical Reference Circuits Multipath Fading Rain Fading Reflections and Obstructions Network Reliability Calculations Regulation of Microwave Radio Networks Radio Network Performance Objectives Designing and Operating Microwave Systems Antennas Radio Diversity Ducting and Obstruction Fading Digital Receiver Interference Path Performance Calculations Digital Microwave Communication: Engineering Point-to-Point Microwave Systems will be of great interest to engineers and managers who specify, design, or evaluate fixed point-to-point microwave systems associated with communications systems and equipment manufacturers, independent and university research organizations, government agencies, telecommunications services, and other users.

Download or read book Microwave and Millimetre Wave Design for Wireless Communications written by Ian Robertson and published by John Wiley & Sons. This book was released on 2016-08-29 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a full range of contemporary techniques for the design of transmitters and receivers for communications systems operating in the range from 1 through to 300 GHz. In this frequency range there is a wide range of technologies that need to be employed, with silicon ICs at the core but, compared with other electronics systems, a much greater use of more specialist devices and components for high performance – for example, high Q-factor/low loss and good power efficiency. Many text books do, of course, cover these topics but what makes this book timely is the rapid adoption of millimetre-waves (frequencies from 30 to 300 GHz) for a wide range of consumer applications such as wireless high definition TV, '5G' Gigabit mobile internet systems and automotive radars. It has taken many years to develop low-cost technologies for suitable transmitters and receivers, so previously these frequencies have been employed only in expensive military and space applications. The book will cover these modern technologies, with the follow topics covered; transmitters and receivers, lumped element filters, tranmission lines and S-parameters, RF MEMS, RFICs and MMICs, and many others. In addition, the book includes extensive line diagrams to illustrate circuit diagrams and block diagrams of systems, including diagrams and photographs showing how circuits are implemented practically. Furthermore, case studies are also included to explain the salient features of a range of important wireless communications systems. The book is accompanied with suitable design examples and exercises based on the Advanced Design System – the industry leading CAD tool for wireless design. More importantly, the authors have been working with Keysight Technologies on a learning & teaching initiative which is designed to promote access to industry-standard EDA tools such as ADS. Through its University Educational Support Program, Keysight offers students the opportunity to request a student license, backed up with extensive classroom materials and support resources. This culminates with students having the chance to demonstrate their RF/MW design and measurement expertise through the Keysight RF & Microwave Industry-Ready Student Certification Program. www.keysight.com/find/eesof-university www.keysight.com/find/eesof-student-certification

Download or read book RF Technologies for Low Power Wireless Communications written by Tatsuo Itoh and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: A survey of microwave technology tailored for professionals in wireless communications RF Technologies for Low Power Wireless Communications updates recent developments in wireless communications from a hardware design standpoint and offers specialized coverage of microwave technology with a focus on the low power wireless units required in modern wireless systems. It explores results of recent research that focused on a holistic, integrated approach to the topics of materials, devices, circuits, modulation, and architectures rather than the more traditional approach of research into isolated topical areas. Twelve chapters deal with various fundamental research aspects of low power wireless electronics written by world-class experts in each field. The first chapter offers an overview of wireless architecture and performance, followed by detailed coverage of: Advanced GaAs-based HBT designs InP-based devices and circuits Si/SiGe HBT technology Noise in GaN devices Power amplifier architectures and nonlinearities Planar-oriented components MEMS and micromachined components Resonators, filters, and low-noise oscillators Antennas Transceiver front-end architectures With a clear focus and expert contributors, RF Technologies for Low Power Wireless Communications will be of interest to a wide range of electrical engineering disciplines working in wireless technologies.

Download or read book Handbook of Research on Advanced Trends in Microwave and Communication Engineering written by El Oualkadi, Ahmed and published by IGI Global. This book was released on 2016-08-25 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless communications have become invaluable in the modern world. The market is going through a revolutionary transformation as new technologies and standards endeavor to keep up with demand for integrated and low-cost mobile and wireless devices. Due to their ubiquity, there is also a need for a simplification of the design of wireless systems and networks. The Handbook of Research on Advanced Trends in Microwave and Communication Engineering showcases the current trends and approaches in the design and analysis of reconfigurable microwave devices, antennas for wireless applications, and wireless communication technologies. Outlining both theoretical and experimental approaches, this publication brings to light the unique design issues of this emerging research, making it an ideal reference source for engineers, researchers, graduate students, and IT professionals.

Download or read book Microwave Mobile Communications An IEEE Press Classic Reissue written by William C. Jakes and published by Wiley-IEEE Press. This book was released on 1994-05-16 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an IEEE classic reissue of the book published by John Wiley & Sons in 1974.This definitive text and reference covers all aspects of microwave mobile systems design. Encompassing ten years of advanced research in the field, it reviews basic microwave theory, explains how cellular systems work and presents useful techniques for effective systems development. Key features include: complete coverage of microwave propagation techniques to design successful cellular systems, extensive chapters covering the broad fundamentals of microwave usage in mobile radio propagation and the functions of mobile radio antennas, comprehensive treatment of modulation methods, interference, noise, layout and control of high-capacity systems, and more! The return of this classic volume should be welcomed by all those seeking an authoritative and complete source of information on this emerging technology.

Download or read book 5G Mobile and Wireless Communications Technology written by Afif Osseiran and published by Cambridge University Press. This book was released on 2016-06-02 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the 5G landscape covering technology options, most likely use cases and potential system architectures.

Download or read book Envelope Tracking Power Amplifiers for Wireless Communications written by Zhancang Wang and published by Artech House. This book was released on 2014-06-01 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Envelope tracking technology is seen as the most promising efficiency enhancement technology for RF power amplifiers for 4G and beyond wireless communications. More and more organizations are investing and researching on this topic with huge potential in academic and commercial areas. This is the first book on the market to offer complete introduction, theory, and design considerations on envelope tracking for wireless communications. This resource presents you with a full introduction to the subject and covers underlying theory and practical design considerations.

Download or read book RF and Microwave Circuit Design for Wireless Communications written by Lawrence E. Larson and published by Artech House Publishers. This book was released on 1997 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF and Microwave Circuit Design for Wireless Communications addresses the complicated modulation schemes and higher frequencies required of today's wireless communications circuits. Covering cutting-edge developments in mixer circuits, frequency synthesizers, amplifier design, noise, and the future of wireless communication, it helps you design applications for digital cellular telephony, wireless LANs, PCS, GaAs and high-speed silicon bipolar IC technology, and low-power RF circuit technology.

Download or read book Wireless Communication Systems written by Ke-Lin Du and published by Cambridge University Press. This book was released on 2010-04-15 with total page 1020 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practically-oriented, all-inclusive guide covers all the major enabling techniques for current and next-generation cellular communications and wireless networking systems. Technologies covered include CDMA, OFDM, UWB, turbo and LDPC coding, smart antennas, wireless ad hoc and sensor networks, MIMO, and cognitive radios, providing readers with everything they need to master wireless systems design in a single volume. Uniquely, a detailed introduction to the properties, design, and selection of RF subsystems and antennas is provided, giving readers a clear overview of the whole wireless system. It is also the first textbook to include a complete introduction to speech coders and video coders used in wireless systems. Richly illustrated with over 400 figures, and with a unique emphasis on practical and state-of-the-art techniques in system design, rather than on the mathematical foundations, this book is ideal for graduate students and researchers in wireless communications, as well as for wireless and telecom engineers.

Download or read book Fundamentals of Wireless Communication written by David Tse and published by Cambridge University Press. This book was released on 2005-05-26 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook takes a unified view of the fundamentals of wireless communication and explains cutting-edge concepts in a simple and intuitive way. An abundant supply of exercises make it ideal for graduate courses in electrical and computer engineering and it will also be of great interest to practising engineers.

Download or read book Wireless Communications written by Theodore S. Rappaport and published by Cambridge University Press. This book was released on 2024-02-08 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now reissued by Cambridge University Press, the updated second edition of this definitive textbook provides an unrivaled introduction to the theoretical and practical fundamentals of wireless communications. Key technical concepts are developed from first principles, and demonstrated to students using over 50 carefully curated worked examples. Over 200 end-of-chapter problems, based on real-world industry scenarios, help cement student understanding. The book provides a thorough coverage of foundational wireless technologies, including wireless local area networks (WLAN), 3G systems, and Bluetooth along with refreshed summaries of recent cellular standards leading to 4G and 5G, insights into the new areas of mobile satellite communications and fixed wireless access, and extra homework problems. Supported online by a solutions manual and lecture slides for instructors, this is the ideal foundation for senior undergraduate and graduate courses in wireless communications.