Download or read book Microwave and RF Semiconductor Control Device Modeling written by Robert H. Caverly and published by Artech House. This book was released on 2016-02-01 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive new resource presents a detailed look at the modeling and simulation of microwave semiconductor control devices and circuits. Fundamental PIN, MOSFET, and MESFET nonlinear device modeling are discussed, including the analysis of transient and harmonic behavior. Considering various control circuit topologies, the book analyzes a wide range of models, from simple approximations, to sophisticated analytical approaches. Readers find clear examples that provide guidance in how to use specific modeling techniques for their challenging projects in the field. Numerous illustrations help practitioners better understand important device and circuit behavior, revealing the relationship between key parameters and results. This authoritative volume covers basic and complex mathematical models for the most common semiconductor control elements used in today’s microwave and RF circuits and systems.

Download or read book Modeling and Characterization of RF and Microwave Power FETs written by Peter Aaen and published by Cambridge University Press. This book was released on 2007-06-25 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive exposition of FET modeling, and is a must-have resource for seasoned professionals and new graduates in the RF and microwave power amplifier design and modeling community. In it, you will find descriptions of characterization and measurement techniques, analysis methods, and the simulator implementation, model verification and validation procedures that are needed to produce a transistor model that can be used with confidence by the circuit designer. Written by semiconductor industry professionals with many years' device modeling experience in LDMOS and III-V technologies, this was the first book to address the modeling requirements specific to high-power RF transistors. A technology-independent approach is described, addressing thermal effects, scaling issues, nonlinear modeling, and in-package matching networks. These are illustrated using the current market-leading high-power RF technology, LDMOS, as well as with III-V power devices.

Download or read book RF and Microwave Semiconductor Device Handbook written by Mike Golio and published by CRC Press. This book was released on 2017-12-19 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a single volume reference for high frequency semiconductor devices, this handbook covers basic material characteristics, system level concerns and constraints, simulation and modeling of devices, and packaging. Individual chapters detail the properties and characteristics of each semiconductor device type, including: Varactors, Schottky diodes, transit-time devices, BJTs, HBTs, MOSFETs, MESFETs, and HEMTs. Written by leading researchers in the field, the RF and Microwave Semiconductor Device Handbook provides an excellent starting point for programs involving development, technology comparison, or acquisition of RF and wireless semiconductor devices.

Download or read book RF and Microwave Modeling and Measurement Techniques for Field Effect Transistors written by Jianjun Gao and published by IET. This book was released on 2010-06-30 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to introduce engineers and students to modern RF and microwave semiconductor device modelling and measurement techniques used in RF and microwave integrated circuit computer aided design (CAD).

Download or read book CMOS RF Modeling Characterization and Applications written by M. Jamal Deen and published by World Scientific. This book was released on 2002 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS technology has now reached a state of evolution, in terms of both frequency and noise, where it is becoming a serious contender for radio frequency (RF) applications in the GHz range. Cutoff frequencies of about 50 GHz have been reported for 0.18 æm CMOS technology, and are expected to reach about 100 GHz when the feature size shrinks to 100 nm within a few years. This translates into CMOS circuit operating frequencies well into the GHz range, which covers the frequency range of many of today's popular wireless products, such as cell phones, GPS (Global Positioning System) and Bluetooth. Of course, the great interest in RF CMOS comes from the obvious advantages of CMOS technology in terms of production cost, high-level integration, and the ability to combine digital, analog and RF circuits on the same chip. This book discusses many of the challenges facing the CMOS RF circuit designer in terms of device modeling and characterization, which are crucial issues in circuit simulation and design.

Download or read book Microwave and RF Engineering written by Roberto Sorrentino and published by John Wiley & Sons. This book was released on 2010-04-30 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential text for both students and professionals, combining detailed theory with clear practical guidance This outstanding book explores a large spectrum of topics within microwave and radio frequency (RF) engineering, encompassing electromagnetic theory, microwave circuits and components. It provides thorough descriptions of the most common microwave test instruments and advises on semiconductor device modelling. With examples taken from the authors' own experience, this book also covers: network and signal theory; electronic technology with guided electromagnetic propagation; microwave circuits such as linear and non-linear circuits, resonant circuits and cavities, monolithic microwave circuits (MMICs), wireless architectures and integrated circuits; passive microwave components, control components; microwave filters and matching networks. Simulation files are included in a CD Rom, found inside the book. Microwave and RF Engineering presents up-to-date research and applications at different levels of difficulty, creating a useful tool for a first approach to the subject as well as for subsequent in-depth study. It is therefore indispensable reading for advanced professionals and designers who operate at high frequencies as well as senior students who are first approaching the subject.

Download or read book RF Circuits and Applications for Practicing Engineers written by Mouqun Dong and published by Artech House. This book was released on 2020-10-31 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive resource explains the theory of RF circuits and systems and the practice of designing them. The fundamentals for linear and low noise amplifier designs, including the S and noise parameters and their applications in amplifier designs and matching network designs using the Smith chart are covered. Theories of RF power amplifiers and high efficiency power amplifiers are also explained. The underpinnings of wireless communications systems as well as passive components commonly used in RF circuits and measurements are discussed. RF measurement techniques and RF switches are also presented. The book explores stability criteria and the invariant property of lossless networks and includes detailed theoretical treatments. The basic concepts and techniques covered in this book are routinely used in today's engineering practice, especially from the perspective of printed circuit board (PCB) based RF circuit design and system integration. Intended for practicing engineers and circuit designers, this book focuses on practical topics in circuit design and measurement techniques. It bridges the gap between academic materials and real circuit designs using real circuit examples and practical tips. Readers develop a numerical feel for RF problems as well as awareness of the concepts of design for cost and design for manufacturing, which is a critical skill set for today's engineers working in an environment of commercial product development.

Download or read book Lumped Elements for RF and Microwave Circuits Second Edition written by Inder J. Bahl and published by Artech House. This book was released on 2022-12-31 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully updated and including entirely new chapters, this Second Edition provides in-depth coverage of the different types of RF and microwave circuit elements, including inductors, capacitors, resistors, transformers, via holes, airbridges, and crossovers. Featuring extensive formulas for lumped elements, design trade-offs, and an updated and current list of references, the book helps you understand the value and usefulness of lumped elements in the design of RF, microwave and millimeter wave components and circuits. You’ll find a balanced treatment between standalone lumped elements and their circuits using MICs, MMICs and RFICs technologies. You’ll also find detailed information on a broader range RFICs that was not available when the popular first edition was published. The book captures – in one consolidated volume -- the fundamentals, equations, modeling, examples, references and overall procedures to design, test and produce microwave components that are indispensable in industry and academia today. With its superb organization and expanded coverage of the subject, this is a must-have, go-to resource for practicing engineers and researchers in industry, government and university and microwave engineers working in the antenna area. Students will also find it a useful reference with its clear explanations, many examples and practical modeling guidelines.

Download or read book Nonlinear Design FETs and HEMTs written by Peter H. Ladbrooke and published by Artech House. This book was released on 2021-11-30 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite its continuing popularity, the so-called standard circuit model of compound semiconductor field-effect transistors (FETs) and high electron mobility transistors (HEMTs) is shown to have a limitation for nonlinear analysis and design: it is valid only in the static limit. When the voltages and currents are time-varying, as they must be for these devices to have any practical use, the model progressively fails for higher specification circuits. This book shows how to reform the standard model to render it fully compliant with the way FETs and HEMTs actually function, thus rendering it valid dynamically. Proof-of-principle is demonstrated for several practical circuits, including a frequency doubler and amplifiers with demanding performance criteria. Methods for extracting both the reformulated model and the standard model are described, including a scheme for re-constructing from S-parameters the bias-dependent dynamic (or RF) I(V) characteristics along which devices work in real-world applications, and as needed for the design of nonlinear circuits using harmonic-balance and time-domain simulators. The book includes a historical review of how variations on the standard model theme evolved, leading up to one of the most widely used—the Angelov (or Chalmers) model.

Download or read book Millimeter Wave GaN Power Amplifier Design written by Edmar Camargo and published by Artech House. This book was released on 2022-05-31 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives you – in one comprehensive and practical resource -- everything you need to successfully design modern and sophisticated power amplifiers at mmWave frequencies. The book provides an in-depth treatment of the design methodology for MMIC power amplifiers, then brings you step by step through the various phases of design, from the selection of technology and preliminary architecture considerations, to the effective design of the matching circuits and conversion of electrical-to-electromagnetic models. Detailed figures and numerous practical applications are included to help you gain valuable insights into these technologies and learn to identify the best path to a successful design. You’ll be guided through a range of new mmWave power applications that show particular promise to support new 5G systems, while mastering the use of GaN technology that continues to dominate the power mmWave applications due to its high power, gain, and efficiency. This is a valuable resource for power amplifier design engineers, technicians, industry R&D staff, and anyone getting into the area of power MMICs who wants to learn how to design at mmWave frequencies.

Download or read book Control Components Using Si GaAs and GaN Technologies written by Inder J. Bahl and published by Artech House. This book was released on 2014-09-01 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control circuits are important parts of RF and microwave systems. Their compact size, high performance, and low cost have played a vital role in the development of cost effective solutions and new applications during the past quarter century. This book provides a comprehensive treatment of such circuits, including device operation and their models, basic circuit theory and designs, and applications. The unique features of this book include in-depth and comprehensive study of control circuits, extensive design equations and figures, treatment of practical aspect of circuits and description of fabrication technologies. It provides you with a broad view of solid state control circuits including various technologies and their comparison and up to date information.

Download or read book Vertical GaN and SiC Power Devices written by Kazuhiro Mochizuki and published by Artech House. This book was released on 2018-04-30 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique new resource provides a comparative introduction to vertical Gallium Nitride (GaN) and Silicon Carbide (SiC) power devices using real commercial device data, computer, and physical models. This book uses commercial examples from recent years and presents the design features of various GaN and SiC power components and devices. Vertical verses lateral power semiconductor devices are explored, including those based on wide bandgap materials. The abstract concepts of solid state physics as they relate to solid state devices are explained with particular emphasis on power solid state devices. Details about the effects of photon recycling are presented, including an explanation of the phenomenon of the family tree of photon-recycling. This book offers in-depth coverage of bulk crystal growth of GaN, including hydride vapor-phase epitaxial (HVPE) growth, high-pressure nitrogen solution growth, sodium-flux growth, ammonothermal growth, and sublimation growth of SiC. The fabrication process, including ion implantation, diffusion, oxidation, metallization, and passivation is explained. The book provides details about metal-semiconductor contact, unipolar power diodes, and metal-insulator-semiconductor (MIS) capacitors. Bipolar power diodes, power switching devices, and edge terminations are also covered in this resource.

Download or read book Microwave Power Amplifier Design with MMIC Modules written by Howard Hausman and published by Artech House. This book was released on 2018-06-30 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid state power amplifiers (SSPA) are a critical part of many microwave systems. Designing SSPAs with monolithic microwave integrated circuits (MMIC) has boosted device performance to much higher levels focused on PA modules. This cutting-edge book offers engineers practical guidance in selecting the best power amplifier module for a particular application and interfacing the selected module with other power amplifier modules in the system. It also explains how to identify and mitigate peripheral issues concerning the PA modules, SSPAs, and microwave systems. This authoritative volume presents the critical techniques and underpinnings of SSPA design, enabling professionals to optimize device and system performance. Engineers gain the knowledge they need to evaluate the optimum topologies for the design of a chain of microwave devices, including power amplifiers. Additionally, the book addresses the interface between the microwave subsystems and the primary DC power, the control and monitoring circuits, and the thermal and EMI paths. Packed with 240 illustrations and over 430 equations, this detailed book provides the practical tools engineers need for their challenging projects in the field.

Download or read book Principles and Applications of RF Microwave in Healthcare and Biosensing written by Changzhi Li and published by Academic Press. This book was released on 2016-10-05 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference, written by leading authorities in the field, gives basic theory, implementation details, advanced research, and applications of RF and microwave in healthcare and biosensing. It first provides a solid understanding of the fundamentals with coverage of the basics of microwave engineering and the interaction between electromagnetic waves and biomaterials. It then presents the state-of-the-art development in microwave biosensing, implantable devices -including applications of microwave technology for sensing biological tissues – and medical diagnosis, along with applications involving remote patient monitoring. this book is an ideal reference for RF and microwave engineer working on, or thinking of working on, the applications of RF and Microwave technology in medicine and biology. Learn: The fundamentals of RF and microwave engineering in healthcare and biosensing How to combine biological and medical aspects of the field with underlying engineering concepts How to implement microwave biosensing for material characterization and cancer diagnosis Applications and functioning of wireless implantable biomedical devices and microwave non-contact biomedical radars How to combine devices, systems, and methods for new practical applications The first book to review the fundamentals, latest developments, and future trends in this important emerging field with emphasis on engineering aspects of sensing, monitoring, and diagnosis using RF and Microwave Extensive coverage of biosensing applications are included Written by leaders in the field, including members of the Technical Coordinating Committee of the Biological Effects and Medical Applications of the IEEE Microwave Theory and Techniques Society

Download or read book Wideband Microwave Materials Characterization written by John W. Schultz and published by Artech House. This book was released on 2023-02-28 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a practical engineering guide to microwave material measurements for both laboratory and manufacturing/field environments, including nondestructive inspection (NDI) and nondestructive evaluation (NDE). The book covers proven methods for characterizing materials at microwave frequencies, including both resonant and wide-bandwidth techniques, and gives you the necessary theory and equations for implementing these methods. You’ll understand how to invert dielectric and/or magnetic material properties from free space transmission and reflection, and how to measure traveling wave attenuation. You’ll also know how to measure dielectric and/or magnetic material properties from transmission line fixtures, and learn how to use computational electromagnetic modeling with a measurement fixture. The book shows you how to build and use microwave NDE equipment for radomes and/or structural dielectric materials. This is an excellent resource for Engineers/scientists conducting or analyzing RF/Microwave/MMW material measurements for applications in electromagnetic materials, as well as those who are developing or applying microwave non-destructive evaluation (NDE) methods to their manufacturing problems.

Download or read book Frequency Measurement Technology written by Ignacio Llamas-Garro and published by Artech House. This book was released on 2017-12-31 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique first-of-its-kind resource provides practical coverage of the design and implementation of frequency measurement receivers, which aid in identifying unknown signals. The technologies used in frequency measurement interferometry-based on-delay lines and filters are explored in this book. Practitioners also find concrete examples of microwave photonics implementations. The designs and concepts that cover conventional photonic instantaneous frequency measurement (IFM) circuits are explained. This book provides details on new designs for microwave photonic circuits and reconfigurable frequency measurement (RFM) circuits using diodes and MicroElectroMechanical Systems (MEMS). This book explains the many diverse applications of frequency measurement that are used in defense, radar, and communications. The instrumentation used to perform frequency measurements is explained, including the use of block analysis for network and spectrum analyzers and calibration techniques. Readers learn the advantages of using frequency measurement based on microwave/RF techniques, including immunity to electromagnetic interference, low loss, compatibility with fiber signal distribution, and parallel processing signals. Moreover, readers gain insight into the future of frequency measurement receivers. The book examines both the underpinnings and the implementation of frequency measurement receivers using many diverse technological platforms.

Download or read book Electronics for Microwave Backhaul written by Vittorio Camarchia and published by Artech House. This book was released on 2016-03-31 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely new resource presents an overview of the electronics of mobile network backhaul. Infrastructure planning, architecture evolution, digital controls, and countermeasures are all presented highlighting the building blocks of specific backhaul features. Tx and Rx design and antenna requirements and covered while examining the overall construction of the microwave radio hardware blocks. Single blocks are explored: the antenna, the analog transmitter and receiver, and the modem, recalling the most important aspects of transport networks and microwave link dimensioning. Essential theory is provided for each hardware block with an emphasis on present solutions. Authored by academic and industrial experts in the field, development and design engineers will benefit from the practical guidance in solving realistic issues and providing useful tips throughout the design process. This book guides readers through the historical evolution of microwave radios and the components of the next generation of mobile networks.