Download or read book Microturbine Generator Handbook written by Stephanie Hamilton and published by PennWell Books. This book was released on 2003 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors use a variety of photos to illustrate lessons, allowing readers to size up the structure or conditions depicted and answer questions based on their observations of the photos. The format includes true and false, multiple choice, fill in the blank, and scenario questions.
Download or read book Handbook of Distributed Generation written by Ramesh Bansal and published by Springer. This book was released on 2017-03-07 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features extensive coverage of all Distributed Energy Generation technologies, highlighting the technical, environmental and economic aspects of distributed resource integration, such as line loss reduction, protection, control, storage, power electronics, reliability improvement, and voltage profile optimization. It explains how electric power system planners, developers, operators, designers, regulators and policy makers can derive many benefits with increased penetration of distributed generation units into smart distribution networks. It further demonstrates how to best realize these benefits via skillful integration of distributed energy sources, based upon an understanding of the characteristics of loads and network configuration.
Download or read book Small Scale Cogeneration Handbook Fourth Edition written by Bernard F. Kolanowski and published by CRC Press. This book was released on 2021-01-08 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cogeneration can now turn up to 90% of the fuel burned into usable energy — compared to just 52% of the fuel typically burned in the local power plant and in a separate existing hot water heating system. The fully updated fourth edition of this comprehensive, bestselling reference provides a wealth of information to assist you in evaluating the feasibility and potential benefits of cogeneration for your facility. Covered in detail are recent regulatory developments and their impact, system selection and sizing, permitting requirements, operation and maintenance, financing, technology basics, micro turbines, absorption chillers, distributed generation, and case histories.
Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. - Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers - A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field - The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems
Download or read book The Electric Power Engineering Handbook Five Volume Set written by Leonard L. Grigsby and published by CRC Press. This book was released on 2018-12-14 with total page 3036 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Electric Power Engineering Handbook, Third Edition updates coverage of recent developments and rapid technological growth in crucial aspects of power systems, including protection, dynamics and stability, operation, and control. With contributions from worldwide field leaders—edited by L.L. Grigsby, one of the world’s most respected, accomplished authorities in power engineering—this reference includes chapters on: Nonconventional Power Generation Conventional Power Generation Transmission Systems Distribution Systems Electric Power Utilization Power Quality Power System Analysis and Simulation Power System Transients Power System Planning (Reliability) Power Electronics Power System Protection Power System Dynamics and Stability Power System Operation and Control Content includes a simplified overview of advances in international standards, practices, and technologies, such as small-signal stability and power system oscillations, power system stability controls, and dynamic modeling of power systems. Each book in this popular series supplies a high level of detail and, more importantly, a tutorial style of writing and use of photographs and graphics to help the reader understand the material. This resource will help readers achieve safe, economical, high-quality power delivery in a dynamic and demanding environment. Volumes in the set: K12642 Electric Power Generation, Transmission, and Distribution, Third Edition (ISBN: 9781439856284) K12648 Power Systems, Third Edition (ISBN: 9781439856338) K13917 Power System Stability and Control, Third Edition (9781439883204) K12650 Electric Power Substations Engineering, Third Edition (9781439856383) K12643 Electric Power Transformer Engineering, Third Edition (9781439856291)
Download or read book The Gas Turbine Handbook written by Tony Giampaolo and published by The Fairmont Press, Inc.. This book was released on 2003 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a bestseller, this comprehensive reference provides the fundamental information required to understand both the operation and proper application of all types of gas turbines. The completely updated second edition adds a new section on use of inlet cooling for power augmentation and NOx control. It explores the full spectrum of gas turbines hardware, typical application scenarios, and operating parameters, controls, inlet treatments, inspection, trouble-shooting, and more. The author discusses strategies that can help readers avoid problems before they occur and provides tips that enable diagnosis of problems in their early stages and analysis of failures to prevent their recurrence.
Download or read book Handbook of Power Quality written by Angelo Baggini and published by John Wiley & Sons. This book was released on 2008-07-31 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the complexity of power systems combined with other factors such as increasing susceptibility of equipment, power quality (PQ) is apt to waver. With electricity in growing demand, low PQ is on the rise and becoming notoriously difficult to remedy. It is an issue that confronts professionals on a daily basis, but few have the required knowledge to diagnose and solve these problems. Handbook of Power Quality examines of the full panorama of PQ disturbances, with background theory and guidelines on measurement procedures and problem solving. It uses the perspectives of both power suppliers and electricity users, with contributions from experts in all aspects of PQ supplying a vital balance of scientific and practical information on the following: frequency variations; the characteristics of voltage, including dips, fluctuations and flicker; the continuity and reliability of electricity supply, its structure, appliances and equipment; the relationship of PQ with power systems, distributed generation, and the electricity market; the monitoring and cost of poor PQ; rational use of energy. An accompanying website hosts case studies for each chapter, demonstrating PQ practice; how problems are identified, analysed and resolved. The website also includes extensive appendices listing the current standards, mathematical formulas, and principles of electrical circuits that are critical for the optimization of solutions. This comprehensive handbook explains PQ methodology with a hands-on approach that makes it essential for all practising power systems engineers and researchers. It simultaneously acts as a reference for electrical engineers and technical managers who meet with power quality issues and would like to further their knowledge in this area.
Download or read book Small scale Cogeneration Handbook written by Bernard F. Kolanowski and published by CRC Press. This book was released on 2022-02-17 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cogeneration can now turn up to 90% of the fuel burned into usable energy – compared to just 52% of the fuel typically burned in a local power plant and in a separate existing hot water heating system. The fifth edition of this comprehensive reference provides a wealth of information to assist you in evaluating the feasibility and potential benefits of cogeneration for your facility. Covered are recent regulatory developments and their impact, system selection and sizing, permitting requirements, operation and maintenance, financing, technology basics, micro turbines, absorption chillers, distributed generation, and numerous case histories. This new edition is updated with new material and comes with access to a useful program that can help determine the economic value of applying cogeneration for your clients’ benefit.
Download or read book Gas Turbine Handbook written by Tony Giampaolo and published by The Fairmont Press, Inc.. This book was released on 2009 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micro turbine Generators written by M. J. Moore and published by John Wiley & Sons. This book was released on 2005-04-22 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, modern precision manufacturing techniques and design methods have substantially improved the performance of micro-turbine generators (MTG). Compared to conventional generators, micro-turbine power sources are much smaller and portable. Microturbine generators are also proving to be more efficient, easier to maintain, and more environmentally friendly with fewer emissions. Although power generators running on microturbines can use various types of energy sources, Micro-turbine Generators brings together a wide range of engineering experience to describe the emergence of micro-turbine technology, its viability and its future potential. COMPLETE CONTENTS: Foreword An introduction to micro-turbine generators Micro-turbine generators – next generation Analysis of micro- and mini-turbine competitive and supply markets in Europe Future potential developments of micro-turbine generators – hybrid cycles and tri-generation Design reliability of micro-turbines Field experience with micro-turbines in Canada Design problems in micro-turbine generators Tip-leakage flow: A comparison between axial and radial turbines
Download or read book Handbook of Renewable Energy Technology written by Ahmed F. Zobaa and published by World Scientific. This book was released on 2011 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, consisting a series of papers written by experts in their respective fields of specialization, will provide a comprehensive coverage of renewable energy technologies, such as wind, wave and solar thermal energy. Other industrial terms like photovoltaic systems, biomass, distributed generations and small hydro power systems are also discussed and further elaborated upon. The Handbook of Renewable Energy Technology will be of great practical benefit to professionals, scientists and researchers in the relevant industries, and will be of interest to those of the general public wanting to know more about renewable energy technologies.
Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Gulf Professional Publishing. This book was released on 2002 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: The gas turbine is a power plant which produces a great amount of energy for its size and weight. This is a comprehensive treatment of gas turbines. The author discusses the design, fabrication, installation, operation and maintenance of gas turbines. He presents the necessary data, along with suggestions to assist engineers in obtaining optimum performance for any gas turbine, under all conditions. The intent of the work is to serve as a reference text after it has accomplished its primary objective of introducing the reader to the broad subject of gas turbines.
Download or read book Handbook of Large Turbo Generator Operation and Maintenance written by Geoff Klempner and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers the complete scope of information regarding operation and maintenance of all types of turbine-driven generators built in the world. The information presented is designed to inform the reader about actual machine operational problems and failure modes that occur in generating stations and other types of facilities.
Download or read book Springer Handbook of Power Systems written by Konstantin O. Papailiou and published by Springer Nature. This book was released on 2021-04-12 with total page 1283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook offers a comprehensive source for electrical power professionals. It covers all elementary topics related to the design, development, operation and management of power systems, and provides an insight from worldwide key players in the electrical power systems industry. Edited by a renowned leader and expert in Power Systems, the book highlights international professionals’ longstanding experiences and addresses the requirements of practitioners but also of newcomers in this field in finding a solution for their problems. The structure of the book follows the physical structure of the power system from the fundamentals through components and equipment to the overall system. In addition the handbook covers certain horizontal matters, for example "Energy fundamentals", "High voltage engineering", and "High current and contact technology" and thus intends to become the major one-stop reference for all issues related to the electrical power system.
Download or read book Power Electronics Handbook written by Muhammad H. Rashid and published by Elsevier. This book was released on 2011-01-13 with total page 1409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power electronics, which is a rapidly growing area in terms of research and applications, uses modern electronics technology to convert electric power from one form to another, such as ac-dc, dc-dc, dc-ac, and ac-ac with a variable output magnitude and frequency. It has many applications in our every day life such as air-conditioners, electric cars, sub-way trains, motor drives, renewable energy sources and power supplies for computers. This book covers all aspects of switching devices, converter circuit topologies, control techniques, analytical methods and some examples of their applications. Designed to appeal to a new generation of engineering professionals, Power Electronics Handbook, 3rd Edition features four new chapters covering renewable energy, energy transmission, energy storage, as well as an introduction to Distributed and Cogeneration (DCG) technology, including gas turbines, gensets, microturbines, wind turbines, variable speed generators, photovoltaics and fuel cells, has been gaining momentum for quite some time now.smart grid technology. With this book readers should be able to provide technical design leadership on assigned power electronics design projects and lead the design from the concept to production involving significant scope and complexity. - Contains 45 chapters covering all aspects of power electronics and its applications - Three new chapters now including coverage Energy Sources, Energy Storage and Electric Power Transmission - Contributions from more than fifty leading experts spanning twelve different countries
Download or read book Essentials of Natural Gas Microturbines written by Valentin A. Boicea and published by CRC Press. This book was released on 2013-12-12 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing a field which, until now, has not been sufficiently investigated, Essentials of Natural Gas Microturbines thoroughly examines several natural gas microturbine technologies suitable not only for distributed generation but also for the automotive industry. An invaluable resource for power systems, electrical, and computer science engineers
Download or read book Fuel Cell Handbook Sixth Edition written by and published by DIANE Publishing. This book was released on with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt:
