Download or read book Microsystems and Nanotechnology written by Zhaoying Zhou and published by Springer Science & Business Media. This book was released on 2012-08-30 with total page 1011 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Microsystems and Nanotechnology” presents the latest science and engineering research and achievements in the fields of microsystems and nanotechnology, bringing together contributions by authoritative experts from the United States, Germany, Great Britain, Japan and China to discuss the latest advances in microelectromechanical systems (MEMS) technology and micro/nanotechnology. The book is divided into five parts – the fundamentals of microsystems and nanotechnology, microsystems technology, nanotechnology, application issues, and the developments and prospects – and is a valuable reference for students, teachers and engineers working with the involved technologies. Professor Zhaoying Zhou is a professor at the Department of Precision Instruments & Mechanology , Tsinghua University , and the Chairman of the MEMS & NEMS Society of China. Dr. Zhonglin Wang is the Director of the Center for Nanostructure Characterization, Georgia Tech, USA. Dr. Liwei Lin is a Professor at the Department of Mechanical Engineering, University of California at Berkeley, USA.
Download or read book Microelectronics Microsystems and Nanotechnology written by Androula G. Nassiopoulou and published by World Scientific. This book was released on 2001 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers on the following: CMOS devices and devices based on compound semiconductors; processing; silicon integrated technology and integrated circuit design; quantum physics; nanotechnology; nanodevices, sensors and microsystems. The latest news and future challenges in these fields are presented in invited papers. Contents: Nanotechnology and Quantum Devices: A New Strategy for In Situ Synthesis of Oligonucleotides Arrays for DNA Chip Technology (F Vinet et al.); Magnetotransport Properties of La-Ca-Mn-O Multilayers (C Christides); Charge Effects and Related Transport Phenomena in Nanosize Silicon/Insulator Structures (J A Berashevich et al.); Thermoelectric Properties of Composite Fermions (M Tsaousidou & G P Triberis); Design and Fabrication of Supported-Metal Catalysts Through Nanotechnology (I Zuburtikudis); Ground State Electronic Structure of Small Si Quantum Dots (C S Garoufalis et al.); Processing: Solid Interface Studies with Applications in Microelectronics (S Kennou et al.); Rapid Thermal Annealing of Arsenic Implanted Silicon for the Formation of Ultra Shallow n+p Junctions (N Georgoulas et al.); Simulation of the Formation and Characterization of Roughness in Photoresists (G P Patsis et al.); Development of a New Low Energy Electron Beam Lithography Simulation Tool (D Velessiotis et al.); CMOS Devices and Devices Based on Compound Semiconductors: Microhardness Characterization of Epitaxially Grown GaN Films. Effect of Light Ion Implantation (P Kavouras et al.); Multiple Quantum Well Solar Cells Under AM1 and Concentrated Sunlight (E Aperathitis et al.); The Influence of Silicon Interstitial Clustering on the Reverse Short Channel Effect (C Tsamis & D Tsoukalas); Noise Modeling of Interdigitated Gate CMOS Devices (E F Tsakas & A N Birbas); High Precision CMOS Euclidean Distance Computing Circuit (G Fikos & S Siskos); Microsystems: Alternative Signal Extraction Technique for Miniature Fluxgates (P D Dimitropoulos & J N Avaritsiotis); Silicon Capacitive Pressure Sensors and Pressure Switches Fabricated Using Silicon Fusion Bonding (S Koliopoulou et al.); Microsystems for Acoustical Signal Detection Applications (D K Fragoulis & J N Avaritsiotis); Capillary Format Bioanalytical Microsystems (K Misiakos et al.); Effectiveness of Local Thermal Isolation by Porous Silicon in a Silicon Thermal Sensor (D Pagonis et al.); Silicon Integrated Technology and Integrated Circuit Design: MOSFET Model Benchmarking Using a Novel CAD Tool (N A Nastos & Y Papananos); Power Amplifier Linearisation Techniques: An Overview (N Naskas & Y Papananos); The Design of a Ripple Carry Adiabatic Adder (V Pavlidis et al.); Maximum Power Estimation in CMOS VLSI Circuits (N E Evmorfopoulos et al.); Power Dissipation Considerations in Low-Voltage CMOS Circuits (A A Hatzopoulos); Microelectronics Networks/Technology Transfer and Exploitation: EURACCESS: A European Platform for Access to CMOS Processing (C L Claeys); MMN: Greek Network on Microelectronics, Microsystems and Nanotechnology (A G Nassiopoulou); Simulations of Molecular Electronics (S T Pantelides et al.); and other papers. Readership: Researchers, academics, industrialists and undergraduates in microelectronics, nanoscience, materials science, applied physics and condensed matter physics.
Download or read book Microelectronics Microsystems And Nanotechnology Papers Presented Of At Mmn 2000 written by Androula G Nassiopoulou and published by World Scientific. This book was released on 2001-10-19 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers on the following: CMOS devices and devices based on compound semiconductors; processing; silicon integrated technology and integrated circuit design; quantum physics; nanotechnology; nanodevices, sensors and microsystems. The latest news and future challenges in these fields are presented in invited papers.
Download or read book Semiconductors for Micro and Nanotechnology written by Jan G. Korvink and published by Wiley-VCH. This book was released on 2002-07-19 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductors play a major role in modern microtechnology, especially in microelectronics. Since the dimensions of new microelectronic components, e.g. computer chips, now reach nanometer size, semiconductor research moves from microtechnology to nanotechnology. An understanding of the semiconductor physics involved in this new technology is of great importance for every student in engineering, especially electrical engineering, microsystem technology and physics. This textbook emphasizes a system-oriented view of semiconductor physics for applications in microsystem technology. While existing books only cover electronic device physics and are mainly written for physics students, this text gives a more hands-on approach to semiconductor physics and so avoids overloading engineering students with mathematical formulas not essential for their studies.
Download or read book Commercializing Micro Nanotechnology Products written by David Tolfree and published by CRC Press. This book was released on 2007-11-19 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-nanotechnologies (MNT) are already making a profound impact on our daily lives. New applications are well underway in the US, Asia, and Europe. However, their potentially disruptive nature, along with the public's concerns, has produced a number of challenges. Commercializing Micro-Nanotechnology Products provides a snapshot of the cur
Download or read book Signal Measurement and Estimation Techniques for Micro and Nanotechnology written by Cédric Clévy and published by Springer Science & Business Media. This book was released on 2011-07-25 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Signal Measurement and Estimation Techniques for Micro and Nanotechnology discusses micro, nano and robotic cells and gives a state-of-the-art presentation of the different techniques and solutions to measure and estimate signals at the micro and nano scale. New technologies and applications such as micromanipulation (artificial components, biological objects), micro-assembly (MEMS, MOEMS, NEMS) and material and surface force characterization are covered. The importance of sensing at the micro and nano scale is presented as a key issue in control systems, as well as for understanding the physical phenomena of these systems. The book also: Explains issues that make signal measurement and estimation techniques difficult at the micro-nano-scale and offers solutions Discusses automated micro-assembly, and control of micro-nano robotic devices Presents and links signal measurement and estimation techniques for micro-nano scale systems with microfabrication methods, sensors integration and control schemes Signal Measurement and Estimation Techniques for Micro and Nanotechnology is a must-read for researchers and engineers working in MEMS and control systems.
Download or read book Nano and Microfabrication for Industrial and Biomedical Applications written by Regina Luttge and published by William Andrew. This book was released on 2016-06-12 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nano- and Microfabrication for Industrial and Biomedical Applications, Second Edition, focuses on the industrial perspective on micro- and nanofabrication methods, including large-scale manufacturing, the transfer of concepts from lab to factory, process tolerance, yield, robustness, and cost. The book gives a history of miniaturization and micro- and nanofabrication, and surveys industrial fields of application, illustrating fabrication processes of relevant micro and nano devices. In this second edition, a new focus area is nanoengineering as an important driver for the rise of novel applications by integrating bio-nanofabrication into microsystems. In addition, new material covers lithographic mould fabrication for soft-lithography, nanolithography techniques, corner lithography, advances in nanosensing, and the developing field of advanced functional materials. Luttge also explores the view that micro- and nanofabrication will be the key driver for a "tech-revolution" in biology and medical research that includes a new case study that covers the developing organ-on-chip concept. Presents an interdisciplinary approach that makes micro/nanofabrication accessible equally to engineers and those with a life science background, both in academic settings and commercial R&D Provides readers with guidelines for assessing the commercial potential of any new technology based on micro/nanofabrication, thus reducing the investment risk Updated edition presents nanoengineering as an important driver for the rise of novel applications by integrating bio-nanofabrication into microsystems
Download or read book From Micro to Nanotechnology written by Martin Riffelmacher and published by diplom.de. This book was released on 2003-03-25 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inhaltsangabe:Zusammenfassung: Ziel dieser Arbeit ist es, einen Überblick über den aktuellen Stand der Technologie und der Märkte auf dem Gebiet der Mikro- und Nanotechnologie zu geben. Mikro- und Nanotechnologie sind aufstrebende neue Technologien, die unsere Gesellschaft in den nächsten Jahren drastisch beeinflussen werden. Mikro- und Nanotechnologie sind definiert als das Erstellen, Verändern und Messen auf einem Niveau kleiner als 100 Nanometer (Molekularebene). Heutige und geplante Auswirkungen und Anwendungen umfassen die folgenden Gebiete: Automobilindustrie, Elektronik und IT-Branche, Umweltschutz, Industrie und Automatisierung, Werkstoffwissenschaften, Chemie, Materialeigenschaften, Medizin und Biomedizin, neue Fabrikationsmethoden, Feinwerktechnik und Optik sowie Telekommunikation. Dieser Bericht geht näher auf die folgenden Themengebiete ein: Forschungs- und Entwicklungserfolge der Vergangenheit sowie Anwendungsgebiete aktueller Mikrotechnologie-Produkte mit einem speziellen Blick auf den Healthcare Markt und Biotechnologie Produkte wie lab on a chip oder Mikroarrays . Es werden neue Fabrikationsmethoden einiger Anwendungen näher betrachtet. Die wichtigsten Marktteilnehmer werden vorgestellt: Universitäten, Firmen, Forschungsanstalten, Organisationen und wichtige Persönlichkeiten. Diese und ihre Arbeitsgebiete werden näher beschrieben. Aktuelle Forschungs- und Entwicklungsprojekte und die zugehörige Infrastruktur aus verschiedensten Ländern werden näher betrachtet. Zukünftige Anwendungen aus verschiedenen Gebieten der Nanotechnologie, der Folgetechnologie zur Mikrotechnik, werden diskutiert. Diese umfassen: Werkstoffwissenschaften, Medizin und Biotechnologie, Feinwerktechnik, Elektronik und IT, Automatisierungstechnik und neue Fabrikationsmethoden. Ein Überblick über die Investoren für die Forschungs- und Entwicklungsarbeit wird gegeben. Öffentliche Förderprogramme verschiedener Länder werden genauso betrachtet und untereinander verglichen wie private Unterstützung von Non-Profit Organisationen und Venture Kapital Gesellschaften. Das Potential der Nanotechnologie für die Zukunft wird zusammen mit einem Ausblick auf eine große Zukunft und hohe Wachstumsraten präsentiert. Verschiedene Marktszenarien für die Zukunft werden vorgestellt und diskutiert. Das Ende dieser Arbeit widmet sich dem Rose Hulman Institute of Technology und deren Gründerzentrum Rose Hulman Ventures. Deren Erfahrung und Methoden bei der Unterstützung von [...]
Download or read book Photonic Microsystems written by Olav Solgaard and published by Springer Science & Business Media. This book was released on 2009-04-05 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes Microelectromechanical systems (MEMS) technology and demonstrates how MEMS allow miniaturization, parallel fabrication, and efficient packaging of optics, as well as integration of optics and electronics. The book shows how the characteristics of MEMS enable practical implementations of a variety of applications, including projection displays, fiber switches, interferometers, and spectrometers. The authors conclude with an up-to-date discussion of the need for the combination of MEMS and Photonic crystals.
Download or read book Micro and Nanotechnology Enabled Applications for Portable Miniaturized Analytical Systems written by Sabu Thomas and published by Elsevier. This book was released on 2021-10-12 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro- and Nanotechnology Enabled Applications for Portable Miniaturized Analytical Systems outlines the basic principles of miniaturized analytical devices, such as spectrometric, separation, imaging and electrochemical miniaturized instruments. Concepts such as smartphone-enabled miniaturized detection systems and micro/nanomachines are also reviewed. Subsequent chapters explore the emerging application of these mobile devices for miniaturized analysis in various fields, including medicine and biomedicine, environmental chemistry, food chemistry, and forensic chemistry. This is an important reference source for materials scientists and engineers wanting to understand how miniaturization techniques are being used to create a range of efficient, sustainable electronic and optical devices. Miniaturization describes the concept of manufacturing increasingly smaller mechanical, optical, and electronic products and devices. These smaller instruments can be used to produce micro- and nanoscale components required for analytical procedures. A variety of micro/nanoscale materials have been synthesized and used in analytical procedures, such as sensing materials, sorbents, adsorbents, catalysts, and reactors. The miniaturization of analytical instruments can be applied to the different steps of analytical procedures, such as sample preparation, analytical separation, and detection, reducing the total cost of manufacturing the instruments and the needed reagents and organic solvents. Outlines how miniaturization techniques can be used to create new optical and electronic micro- and nanodevices Explores major application areas, including biomedicine, environmental science and security Assesses the major challenges of using miniaturization techniques
Download or read book Magnetoresistive and Thermoresistive Scanning Probe Microscopy with Applications in Micro and Nanotechnology written by Meier, Tobias and published by KIT Scientific Publishing. This book was released on 2014-10-02 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents approaches to extend limits of scanning probe microscopy techniques towards more versatile instruments using integrated sensor concepts. For structural surface analysis, magnetoresistive sensing is introduced and thermoresistive sensing is applied to study nanoscale phonon transport in chain-like molecules. Investigating with these techniques the properties of shape memory polymers, a fabrication method to design application-inspired micro- and nanostructures is introduced.
Download or read book The Nano Micro Interface written by Hans-Jörg Fecht and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two exciting worlds of science and technology - the nano and micro dimensions. The former is a booming new field of research, the latter the established size range for electronics, and for mutual technological benefit and future commercialization, suitable junctions need to be found. Functional nanostructures such as DNA computers, sensors, neural interfaces, nanooptics or molecular electronics need to be wired to their 'bigger' surroundings. Coming from the opposite direction, microelectronics have experienced an unprecedented miniaturization drive in the last decade, pushing ever further down through the micro size scale towards submicron circuitry. Bringing these two worlds together is a new interdisciplinary challenge for scientists and engineers alike - recognized and substantially funded by the European Commission and other major project initiators worldwide. This book offers a wide range of information from technologies to materials and devices as well as from research to administrative know-how collected by the editors from renowned key members of the nano/micro community.
Download or read book Micro and Nanotechnology for Space Systems written by Henry Helvajian and published by AIAA. This book was released on 1997 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microengineering and microelectromechanical systems (MEMS) are a subject of considerable current interest involving research and development throughout the world. This first volume of a series on this topic reviews and evaluates micro- and nanotechnologies applicable to U.S. Air Force and commercial space systems. It introduces the concept of application-specific integrated microinstrument (ASIM), an intelligent microinstrument.
Download or read book Microsystems for Bioelectronics written by Victor V. Zhirnov and published by William Andrew. This book was released on 2010-11-23 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microsystems for Bioelectronics is the ultimate guide in the biomedical application industry. It provides a physics-based assessment of the limitless potential of miniaturization technologies. This book goes far beyond the complete design of the final systems. It also discusses the developments of computation and communication subsystems. The future of this technology lies in understanding the scaling limits for the individual systems. This includes all of its components and the fundamental energy source that powers all autonomous microsystems. Rapid advances in microfabrication technologies are offering new opportunities and capabilities to develop systems for biomedical applications. These applications include the diagnostics community and those that are active in therapy services. Microsystems for Bioelectronics is one of the only books on the market today that goes into the comprehensive treatment of integrated microsystems. Discusses the diverse components that make up Microsystems Outlines the problems with miniaturization of energy sources Perfect reference for those in both the Engineering and Medical Profession
Download or read book Systems Engineering for Microscale and Nanoscale Technologies written by M. Ann Garrison Darrin and published by CRC Press. This book was released on 2016-04-19 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: To realize the full potential of micro- and nanoscale devices in system building, it is critical to develop systems engineering methodologies that successfully integrate stand-alone, small-scale technologies that can effectively interface with the macro world. So how do we accomplish this?Systems Engineering for Microscale and Nanoscale Technologie
Download or read book Microelectronics Microsystems and Nanotechnology written by Androula G. Nassiopoulou and published by World Scientific. This book was released on 2001 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers on the following: CMOS devices and devices based on compound semiconductors; processing; silicon integrated technology and integrated circuit design; quantum physics; nanotechnology; nanodevices, sensors and microsystems. The latest news and future challenges in these fields are presented in invited papers.
Download or read book MEMS and Microsystems written by Tai-Ran Hsu and published by John Wiley & Sons. This book was released on 2020-07-16 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology/Engineering/Mechanical A bestselling MEMS text...now better than ever. An engineering design approach to Microelectromechanical Systems, MEMS and Microsystems remains the only available text to cover both the electrical and the mechanical aspects of the technology. In the five years since the publication of the first edition, there have been significant changes in the science and technology of miniaturization, including microsystems technology and nanotechnology. In response to the increasing needs of engineers to acquire basic knowledge and experience in these areas, this popular text has been carefully updated, including an entirely new section on the introduction of nanoscale engineering. Following a brief introduction to the history and evolution of nanotechnology, the author covers the fundamentals in the engineering design of nanostructures, including fabrication techniques for producing nanoproducts, engineering design principles in molecular dynamics, and fluid flows and heat transmission in nanoscale substances. Other highlights of the Second Edition include: * Expanded coverage of microfabrication plus assembly and packaging technologies * The introduction of microgyroscopes, miniature microphones, and heat pipes * Design methodologies for thermally actuated multilayered device components * The use of popular SU-8 polymer material Supported by numerous examples, case studies, and applied problems to facilitate understanding and real-world application, the Second Edition will be of significant value for both professionals and senior-level mechanical or electrical engineering students.
