Download or read book Microsystem Technology and Microrobotics written by Sergej Fatikow and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microsystem technology (MST) integrates very small (up to a few nanometers) mechanical, electronic, optical, and other components on a substrate to construct functional devices. These devices are used as intelligent sensors, actuators, and controllers for medical, automotive, household and many other purposes. This book is a basic introduction to MST for students, engineers, and scientists. It is the first of its kind to cover MST in its entirety. It gives a comprehensive treatment of all important parts of MST such as microfabrication technologies, microactuators, microsensors, development and testing of microsystems, and information processing in microsystems. It surveys products built to date and experimental products and gives a comprehensive view of all developments leading to MST devices and robots.
Download or read book Introduction to Microsystem Technology written by Gerald Gerlach and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over half a century after the discovery of the piezoresistive effect, microsystem technology has experienced considerable developments. Expanding the opportunities of microelectronics to non-electronic systems, its number of application fields continues to increase. Microsensors are one of the most important fields, used in medical applications and micromechanics. Microfluidic systems are also a significant area, most commonly used in ink-jet printer heads. This textbook focuses on the essentials of microsystems technology, providing a knowledgeable grounding and a clear path through this well-established scientific dicipline. With a methodical, student-orientated approach, Introduction to Microsystem Technology covers the following: microsystem materials (including silicon, polymers and thin films), and the scaling effects of going micro; fabrication techniques based on different material properties, descriptions of their limitations and functional and shape elements produced by these techniques; sensors and actuators based on elements such as mechanical, fluidic, and thermal (yaw rate sensor components are described); the influence of technology parameters on microsystem properties, asking, for example, when is the function of a microsystem device robust and safe? The book presents problems at the end of each chapter so that you may test your understanding of the key concepts (full solutions for these are given on an accompanying website). Practical examples are included also, as well as case studies that enable a better understanding of the technology as a whole. With its extensive treatment on the fundamentals of microsystem technology, this book also serves as a compendium for engineers and technicians working with microsystem technology.
Download or read book Microsystem Technology written by Wolfgang Menz and published by John Wiley & Sons. This book was released on 2001-03-13 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise introduction to microsystems technology includes the latest trends in this emerging scientific discipline. Completely revised, this edition has expanded chapters on silicium and LIGA technology as well as new topics.
Download or read book Advanced Topics in Microsystem Technology written by Johana Kuncová-Kallio and published by . This book was released on 2007 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micro Manufacturing Technologies and Their Applications written by Irene Fassi and published by Springer. This book was released on 2017-01-31 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth theoretical and practical information on recent advances in micro-manufacturing technologies and processes, covering such topics as micro-injection moulding, micro-cutting, micro-EDM, micro-assembly, micro-additive manufacturing, moulded interconnected devices, and microscale metrology. It is designed to provide complementary material for the related e-learning platform on micro-manufacturing developed within the framework of the Leonardo da Vinci project 2013-3748/542424: MIMAN-T: Micro-Manufacturing Training System for SMEs. The book is mainly addressed to technicians and prospective professionals in the sector and will serve as an easily usable tool to facilitate the translation of micro-manufacturing technologies into tangible industrial benefits. Numerous examples are included to assist readers in learning and implementing the described technologies. In addition, an individual chapter is devoted to technological foresight, addressing market analysis and business models for micro-manufacturers.
Download or read book Micro and Nano Techniques for the Handling of Biological Samples written by Jaime Castillo-León and published by CRC Press. This book was released on 2011-08-25 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several micro- and nanomanipulation techniques have emerged in recent decades thanks to advances in micro- and nanofabrication. For instance, the atomic force microscope (AFM) uses a nano-sized tip to image, push, pull, cut, and indent biological material in air, liquid, or vacuum. Using micro- and nanofabrication techniques, scientists can make manipulation tools, such as microgrippers and nanotweezers, on the same length scale as the biological samples. Micro and Nano Techniques for the Handling of Biological Samples reviews the different techniques available to manipulate and integrate biological materials in a controlled manner, either by sliding them along a surface (2-D manipulation), or by gripping and moving them to a new position (3-D manipulation). The advantages and drawbacks are mentioned together with examples that reflect the state-of-the-art in manipulation techniques for biological samples. Thanks to the advances in micro- and nanomanipulation techniques, the integration of biomaterials with physical transducers has been possible, giving rise to new and highly sensitive biosensing devices. Although great progress has been made, challenges are still present. To understand the complex interactions between and inside biological samples, scientists will always be working on improving technologies to manipulate, transport, sort, and integrate samples in different environments. Balanced between simplicity for the beginner and hardcore theory for the more advanced readers, this book is the ideal launching point for sharpening the scientific tools required to address these challenges.
Download or read book Japan written by Alfons Botthof and published by . This book was released on 1997 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book MEMS written by Mohamed Gad-el-Hak and published by CRC Press. This book was released on 2005-11-29 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: As our knowledge of microelectromechanical systems (MEMS) continues to grow, so does The MEMS Handbook. The field has changed so much that this Second Edition is now available in three volumes. Individually, each volume provides focused, authoritative treatment of specific areas of interest. Together, they comprise the most comprehensive collection
Download or read book Mobile Microrobotics written by Metin Sitti and published by MIT Press. This book was released on 2017-06-16 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first textbook on micron-scale mobile robotics, introducing the fundamentals of design, analysis, fabrication, and control, and drawing on case studies of existing approaches. Progress in micro- and nano-scale science and technology has created a demand for new microsystems for high-impact applications in healthcare, biotechnology, manufacturing, and mobile sensor networks. The new robotics field of microrobotics has emerged to extend our interactions and explorations to sub-millimeter scales. This is the first textbook on micron-scale mobile robotics, introducing the fundamentals of design, analysis, fabrication, and control, and drawing on case studies of existing approaches. The book covers the scaling laws that can be used to determine the dominant forces and effects at the micron scale; models forces acting on microrobots, including surface forces, friction, and viscous drag; and describes such possible microfabrication techniques as photo-lithography, bulk micromachining, and deep reactive ion etching. It presents on-board and remote sensing methods, noting that remote sensors are currently more feasible; studies possible on-board microactuators; discusses self-propulsion methods that use self-generated local gradients and fields or biological cells in liquid environments; and describes remote microrobot actuation methods for use in limited spaces such as inside the human body. It covers possible on-board powering methods, indispensable in future medical and other applications; locomotion methods for robots on surfaces, in liquids, in air, and on fluid-air interfaces; and the challenges of microrobot localization and control, in particular multi-robot control methods for magnetic microrobots. Finally, the book addresses current and future applications, including noninvasive medical diagnosis and treatment, environmental remediation, and scientific tools.
Download or read book Fundamentals of Modern Manufacturing written by Mikell P. Groover and published by John Wiley & Sons. This book was released on 2010-01-07 with total page 1027 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers rely on Groover because of the book’s quantitative and engineering-oriented approach that provides more equations and numerical problem exercises. The fourth edition introduces more modern topics, including new materials, processes and systems. End of chapter problems are also thoroughly revised to make the material more relevant. Several figures have been enhanced to significantly improve the quality of artwork. All of these changes will help engineers better understand the topic and how to apply it in the field.
Download or read book Microrobotics and Microsystem Fabrication written by Armin Sulzmann and published by SPIE-International Society for Optical Engineering. This book was released on 1998 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress on Advanced Manufacture for Micro nano Technology 2005 written by and published by . This book was released on 2006 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The MEMS Handbook written by Mohamed Gad-el-Hak and published by CRC Press. This book was released on 2001-09-27 with total page 1386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revolution is well underway. Our understanding and utilization of microelectromechanical systems (MEMS) are growing at an explosive rate with a worldwide market approaching billions of dollars. In time, microdevices will fill the niches of our lives as pervasively as electronics do right now. But if these miniature devices are to fulfill their mammoth potential, today's engineers need a thorough grounding in the underlying physics, modeling techniques, fabrication methods, and materials of MEMS. The MEMS Handbook delivers all of this and more. Its team of authors-unsurpassed in their experience and standing in the scientific community- explore various aspects of MEMS: their design, fabrication, and applications as well as the physical modeling of their operations. Designed for maximum readability without compromising rigor, it provides a current and essential overview of this fledgling discipline.
Download or read book Microbiorobotics written by Minjun Kim and published by William Andrew. This book was released on 2017-03-18 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbiorobotics: Biologically Inspired Microscale Robotic Systems, Second Edition presents information on a new engineering discipline that takes a multidisciplinary approach to accomplish precise manipulation of microscale spaces. Microorganisms have evolved various mechanisms to thrive in microscale environments and are therefore a useful tool for use in many applications, ranging from micromanufacturing techniques, to cellular manipulation. In the context of microrobotics, biological microrobots can directly harness the microorganisms for propulsive and sensing power and synthetic microrobots can mimic the microorganisms’ motions for effective locomotion. This second edition covers new advances and insights that have emerged in recent years. Several new chapters have been added on important new research areas, with existing chapters thoroughly revised. In particular, increased coverage is given to fluid dynamics of microswimmers in nature. Gives the reader an understanding of the fundamental changes in dynamics and fabrication techniques in the microenvironment Offers a unique two-pronged approach to microrobotics from a biological perspective, i.e. bioinspired engineering design of biological systems to accomplish engineering tasks Introduces an interdisciplinary readership to the toolkit that micro-organisms offer to micro-engineering
Download or read book Automated Nanohandling by Microrobots written by Sergej Fatikow and published by Springer Science & Business Media. This book was released on 2008 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to robot-based nanohandling. It presents work on the development of a versatile microrobot-based nanohandling robot station inside a scanning electron microscope (SEM). Those unfamiliar with the subject will find the text, which is complemented throughout by the extensive use of illustrations, clear and simple to understand. The author has published two books and numerous papers in the field, and holds more than 50 patents.
Download or read book Micromanufacturing Engineering and Technology written by Yi Qin and published by William Andrew. This book was released on 2010-07-02 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing Engineering and Technology presents applicable knowledge of technology, equipment and applications, and the core economic issues of micromanufacturing for anyone with a basic understanding of manufacturing, material, or product engineering. It explains micro-engineering issues (design, systems, materials, market and industrial development), technologies, facilities, organization, competitiveness, and innovation with an analysis of future potential. The machining, forming, and joining of miniature / micro-products are all covered in depth, covering: grinding/milling, laser applications, and photo chemical etching; embossing (hot & UV), injection molding and forming (bulk, sheet, hydro, laser); mechanical assembly, laser joining, soldering, and packaging. Presents case studies, material and design considerations, working principles, process configurations, and information on tools, equipment, parameters and control Explains the many facets of recently emerging additive / hybrid technologies and systems, incl: photo-electric-forming, liga, surface treatment, and thin film fabrication Outlines system engineering issues pertaining to handling, metrology, testing, integration and software Explains widely used micro parts in bio / medical industry, information technology and automotive engineering Covers technologies in high demand, such as: micro-mechanical-cutting, lasermachining, micro-forming, micro-EDM, micro-joining, photo-chemical-etching, photo-electro-forming, and micro-packaging
Download or read book Micro Mechanical Systems written by T. Fukuda and published by Elsevier. This book was released on 1998-07-24 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: In ten sections this book describes the principles and technology of Micro Mechanical Systems. Section one is a general introduction to the historical background and the parallels to microelectronics, reviewing the motivation for microsystems, and discussing microphysics and design and the evolution from microcomponents to microsystems. Section two covers the areas of photolithographic microfabrication, basic concepts of planar processing, materials, and processes. Section three looks at micromachining by machine tools, its history, basic principles and preparation methods. Section four discusses tribological aspects of microsystems. Section five covers fabrication, performance and examples of silicon microsensors. Section six looks at electric and magnetic micro-actuators for micro-robots. Section seven covers energy source and power supply methods. Section eight covers controlling principles and methods of micro mechanical systems and section nine gives examples of microsystems and micromachines. The final section discusses the future problems and outlook of micro mechanical systems.
