Download or read book Microstructure and Tensile Properties of BN SiC Coated Hi Nicalon and Sylramic SiC Fiber Preforms written by and published by . This book was released on 2001 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microstructure and Tensile Properties of BN SiC Coated Hi Nicalon and Sylramic SiC Fiber Preforms Revised written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-19 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Batch to batch and within batch variations, and the influence of fiber architecture on room temperature physical and tensile properties of BN/SiC coated Hi-Nicalon and Sylramic SiC fiber preform specimens were determined. The three fiber architectures studied were plain weave (PW), 5-harness satin (5HS), and 8-harness satin (8HS). Results indicate that the physical properties vary up to 10 percent within a batch, and up to 20 percent between batches of preforms. Load-reload (Hysteresis) and acoustic emission methods were used to analyze damage accumulation occurring during tensile loading. Early acoustic emission activity, before observable hysteretic behavior, indicates that the damage starts with the formation of nonbridged tunnel cracks. These cracks then propagate and intersect the load bearing "0 deg" fibers giving rise to hysteretic behavior. For the Hi-Nicalon preform specimens, the onset of "0 deg" bundle cracking stress and strain appeared to be independent of the fiber architecture. Also, the "0 deg" fiber bundle cracking strain remained nearly the same for the preform specimens of both fiber types. TEM analysis indicates that the CVI BN interface coating is mostly amorphous and contains carbon and oxygen impurities, and the CVI SiC coating is crystalline. No reaction exists between the CVI BN and SiC coating. Bhatt, Ramakrishna T. and Chen, Yuan L. and Morscher, Gregory N. Glenn Research Center NASA/TM-2001-210695/REV1, E-12626-1/REV1, NAS 1.15:210695/REV1
Download or read book Microstructure and Tensile Properties of BN SiC Coated Hi Nicalon and Sylramic SiC Fiber Preforms written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-19 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Batch to batch and within batch variations, and the influence of fiber architecture on room temperature physical and tensile properties of BN/SiC coated Hi-Nicalon and Sylramic SiC fiber preform specimens were determined. The three fiber architectures studied were plain weave (PW), 5-harness satin (5HS) and 8-harness satin (8HS) Results indicate that the physical properties vary up to 10 percent within a batch, and up to 20 percent between batches of preforms. Load-reload (Hysteresis) and acoustic emission methods were used to analyze damage accumulation occurring during tensile loading. Early acoustic emission activity, before observable hysteretic behavior, indicates that the damage starts with the formation of nonbridged tunnel cracks. These cracks then propagate and intersect the load bearing "0" fibers giving rise to hysteretic behavior, For the Hi-Nicalon preform specimens, the onset of "0" bundle cracking stress and strain appeared to be independent of the fiber architecture. Also, the "0" fiber bundle cracking strain remained nearly the same for the preform specimens of both fiber types. Transmission Electron Microscope (TEM) analysis indicates that the Chemical Vapor Infiltration (CVI) Boron Nitride (BN) interface coating is mostly amorphous and contains carbon and oxygen impurities, and the CVI SiC coating is crystalline. No reaction exists between the CVI BN and SiC coating. Bhatt, Ramakrishna T. and Chen, Yuan L. and Morscher, Gregory N. Glenn Research Center NASA/TM-2001-210695, NAS 1.15:210695, E-12626
Download or read book Effects of High Temperature Argon Heat Treatment on Tensile Strength and Microstructure of BN SiC Coated SiC Fiber Preforms written by and published by . This book was released on 1999 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preforms of BN/SiC coated Hi-Nicalon and Sylramic SiC fibers were heat treated under 0.1 MPa argon pressure between 1000 deg to 1800 deg C for 1 and 100h. The effects of high temperature exposure on physical dimensions, weight, room temperature tensile strength, and microstructure of preforms have been studied. Both preforms showed shrinkage and weight loss, and microstructural changes beyond 1000 deg C. After 100 hr exposure, the Hi-Nicalon preforms showed strength degradation beyond 1200 deg C. The mechanisms of the strength degradation appear to be grain growth of the SiC fibers and crystallization of the BN coating. After 100 hr, the Sylramic preforms heat treated to 1000 deg C retained their as-produced strength while some of those heat-treated between 1000 deg and 1800 deg C showed strength degradation and others did not. At 1800 deg C, the ultimate tensile strength decreased with increasing time of exposure. Reasons for strength degradation of Sylramic preforms are being investigated.
Download or read book TMS 2013 142nd Annual Meeting and Exhibition written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2013-02-22 with total page 1238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting papers from the 2013 annual meeting of The Minerals, Metals & Materials Society (TMS), this volume covers developments in all aspects of high temperature electrochemistry, from the fundamental to the empirical and from the theoretical to the applied.
Download or read book Tensile Properties and Microstructural Characterization of Hi Nicalon SiC RBSN Composites written by and published by . This book was released on 1998 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 2003 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Ceramic Matrix Composites written by Walter Krenkel and published by Wiley-VCH. This book was released on 2001 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extreme high temperature stability and damage tolerance of materials and components required for space, terrestrial, energetic and many other applications can only be achieved by ceramic materials. All over the world research is going on to develop ceramics with quasiductile behaviour. The materials with the highest potential for high temperature applications are fibre reinforced ceramic matrix composites (CMC). The international conference HT-CMC 4 in Munich will continue the tradition of its successful predecessor meetings held in Bordeaux (France, 1993), Santa Barbara (USA, 1995) and Osaka (Japan, 1998). This conference series has been recognized as the central meeting event in high temperature CMC science and technology and demonstrates the great interest in research and development on reinforced ceramics. The Proceedings of this conference will therefore be a valuable reference for every materials scientist or engineer involved in this field of high-tech materials development.
Download or read book Handbook of Ceramic Composites written by Narottam P. Bansal and published by Springer Science & Business Media. This book was released on 2006-08-25 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This valuable handbook has been compiled by internationally renowned researchers in the field. Each chapter is focused on a specific composite system or a class of composites, presenting a detailed description of processing, properties, and applications.
Download or read book Annual Meeting Abstracts written by American Ceramic Society. Meeting and published by . This book was released on 1999 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the ASME Turbo Expo 2002 Presented at the 2002 ASME Turbo Expo June 3 6 2002 Amsterdam the Netherlands written by and published by . This book was released on 2002 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This is Volume 1 of five volumes that comprise the proceedings of the June 2002 conference, sponsored by the International Gas Turbine Institute (IGTI), a technical institute of the American Society of Mechanical Engineers. The purpose of the conference was to facilitate international exchange and development of educational and technical information related to the design, application, manufacture, operation, maintenance, and environmental impact of all types of gas engines. With an emphasis upon the need for more efficient, cleaner, and more reliable gas turbines, the approximately 130 articles cover various technical aspects of aircraft engines; coal, biomass, and alternative fuels; combustion and fuels; education; electric power; and vehicular and small turbomachines. There is no subject index. Annotation c. Book News, Inc., Portland, OR (booknews.com).
Download or read book The Journal of the Acoustical Society of America written by Acoustical Society of America and published by . This book was released on 2003 with total page 1678 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Abstracts written by and published by . This book was released on 1999 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal and Ceramic Matrix Composites written by Brian Cantor and published by CRC Press. This book was released on 2003-11-01 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from leading experts in their respective fields, Metal and Ceramic Matrix Composites provides a comprehensive overview of topics on specific materials and trends. It is a subject regularly included as a final year option in materials science courses and is also of much industrial and academic interest. The book begins wit
Download or read book Ceramic Matrix Composites written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2014-10-27 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive source of information on various aspects of ceramic matrix composites (CMC). It covers ceramic and carbon fibers; the fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration and joining. Each chapter in the book is written by specialists and internationally renowned researchers in the field. This book will provide state-of-the-art information on different aspects of CMCs. The book will be directed to researchers working in industry, academia, and national laboratories with interest and professional competence on CMCs. The book will also be useful to senior year and graduate students pursuing degrees in ceramic science and engineering, materials science and engineering, aeronautical, mechanical, and civil or aerospace engineering. Presents recent advances, new approaches and discusses new issues in the field, such as foreign object damage, life predictions, multiscale modeling based on probabilistic approaches, etc. Caters to the increasing interest in the application of ceramic matrix composites (CMC) materials in areas as diverse as aerospace, transport, energy, nuclear, and environment. CMCs are considered ans enabling technology for advanced aeropropulsion, space propulsion, space power, aerospace vehicles, space structures, as well as nuclear and chemical industries. Offers detailed descriptions of ceramic and carbon fibers; fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration/joining.
Download or read book Structural Composite Materials written by F. C. Campbell and published by ASM International. This book was released on 2010-01-01 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with all aspects of advanced composite materials; what they are, where they are used, how they are made, their properties, how they are designed and analyzed, and how they perform in-service. It covers both continuous and discontinuous fiber composites fabricated from polymer, metal, and ceramic matrices, with an emphasis on continuous fiber polymer matrix composites.