Download or read book Microstructure and Properties of Refractories written by J.P. Singh and published by Trans Tech Publications Ltd. This book was released on 1993-08-20 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: While iron and steel industries are the major users of refractory materials, applications in other areas such as power plants and waste incinerators are of growing importance. The appropriate use and maximum performance of the refractories cannot be achieved unless their interaction with the service environment is properly understood. The correlations between the microstructure of these materials and their thermochemical as well as thermomechanical properties greatly enhances this understanding.
Download or read book Ceramic Microstructures written by W.E. Lee and published by Springer Science & Business Media. This book was released on 1994-10-31 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text deals with the effect of processing on the microstructure and properties of advanced structural and electroceramic materials. It fulfils the need for a well illustrated book explaining the relation between microstructure and properties in structural ceramics, featuring high quality micrographs and characterization techniques.
Download or read book Refractory Materials written by Christopher Bryant and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Refractory materials are used in several industries involving very aggressive environments, thus the number of chemical, thermal and physical properties required for a refractory material are high and diverse. In Refractory Materials: Characteristics, Properties and Uses, the authors suggest that the determination of the mineralogical phases amounts is an essential parameter for the design of new refractories matrix to have command over the desired properties and quality of the final product. The subsequent chapter may serve as a guide to the composition- and microstructure-based interpretation of experimental findings in refractory materials. Based on the concepts and refractory materials data provided in this book, taking into account the general issues concerning strength measurements, the reader should be able to realistically assess even such complex quantities as thermal shock resistance parameters. Next, a systematic joint study of the temperature dependences of the isobaric molar heat capacity CP(T) and the volume coefficient of thermal expansion β(T) of polyatomic solids was carried out on the example of refractory oxide ceramics: periclase, MgO, and corundum, Al2O3. Both ceramics have the widest practical applications and are considered as reference substances, which justifies their choice for research. In the closing chapter, the B-model is applied to a joint study of temperature dependences of the principal thermodynamic functions of the selected refractory oxide ceramics, namely, periclase, MgO, and corundum, Al2O3. Primarily, the isobaric molar heat capacity CP(T), the volume coefficient of thermal expansion β(T), and their correlation, β(CP), were investigated between T = 0 and the melting point Tm. Under the B-model control, mutually consistent calorimetric (change in the molar enthalpy, the molar entropy, the reduced thermodynamic potential) and dilatometric (the molar volume, the volume coefficient of thermal expansion) data were obtained and tabulated in the entire solid state range of the ceramics.
Download or read book Fundamental Design of Steelmaking Refractories written by Debasish Sarkar and published by John Wiley & Sons. This book was released on 2023-05-09 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental Design of Steelmaking Refractories Comprehensive up-to-date resource organizing fundamental aspects for the design and performance of steelmaking refractories Fundamental Design of Steelmaking Refractories provides a fundamental understanding in the design of steelmaking refractories, in detail and all in one source, enabling readers to understand various issues including how heat and mass transfer occurs throughout the refractory, how matrix impurity or their contact affects the phases, and how invisible defects form during refractory manufacturing that eventually facilitates to analyze wear, corrosion, and performance of different refractory linings for primary and secondary steelmaking vessels, tundish, and continuous casting refractories. Other specific sample topics covered in Fundamental Design of Steelmaking Refractories include: Phase formations and correlation with impurity effects and refractory processing shortcomings Stress, wear, and corrosion to design refractories and performance statistics of steelmaking refractories Equilibrium and non-equilibrium phases, packing, stress and defects in compaction, and degree of ceramic bonding Thermal and mechanical behavior, flow control mechanisms, continuous casting refractories, and premature refractory damage Precast and purging system, consistent supply and time management, and preventive maintenance in operation With its complete coverage of the subject, Fundamental Design of Steelmaking Refractories fulfills the academic demand of undergraduate, postgraduate, and research scholars of ceramic engineering; metallurgical engineers and mechanical engineering outlets that want to nurture in the refractory and steel sectors will also find value in the text.
Download or read book Proceedings of the Unified International Technical Conference on Refractories UNITECR 2013 written by Dana Goski and published by John Wiley & Sons. This book was released on 2014-03-18 with total page 1404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings containing 231 manuscripts that were submitted and approved for the 13th biennial worldwide refractories congress recognized as the Unified International Technical Conference on Refractories(UNITECR), held September 10-13, 2013.
Download or read book Refractories Handbook written by Charles Schacht and published by CRC Press. This book was released on 2004-08-11 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference details the technical, chemical, and mechanical aspects of high-temperature refractory composite materials for step-by-step guidance on the selection of the most appropriate system for specific manufacturing processes. The book surveys a wide range of lining system geometries and material combinations and covers a broad
Download or read book Refractory Technology written by Ritwik Sarkar and published by CRC Press. This book was released on 2023-08-11 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the refractories from different fundamental aspects, even with the support of phase diagrams, and also details the prominent applications of these industrial materials. The initial chapters cover fundamentals of refractories, classifications, properties, and testing, while later chapters describe different common shaped and unshaped refractories in detail and special refractories in a concise manner. The second edition includes new classifications, microstructures, the effect of impurities with binary and ternary phase diagrams, and recent trends in refractories including homework problems and an updated bibliography. Features: Provides exclusive material on refractories Discusses detailed descriptions of different shaped and unshaped refractories Covers concepts like environmental issues, recycling, and nanotechnology Explores details on testing and specifications including thermochemical and corrosion behavior Includes a separate chapter on trends of refractories and other issues This book is aimed at junior/senior undergraduate students and researchers of ceramics, metallurgical engineering, and refractories.
Download or read book Proceedings of the Unified International Technical Conference on Refractories UNITECR 2013 written by Dana Goski and published by John Wiley & Sons. This book was released on 2014-02-10 with total page 1404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings containing 231 manuscripts that were submitted and approved for the 13th biennial worldwide refractories congress recognized as the Unified International Technical Conference on Refractories(UNITECR), held September 10-13, 2013.
Download or read book Refractories for the Cement Industry written by Prasunjit Sengupta and published by Springer Nature. This book was released on 2019-08-26 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides process engineers with all of the information necessary for installation, maintenance and management of refractory in a cement industry. It describes how to characterize the refractory material and select refractories for various equipments in the cement plant. The author explains refractory installation, in general, and the rotary kiln specifically, as it is distinct from static furnaces used in metallurgical or process industries. It also details the chemical and physical factors that influence refractory performance and has discussed the mechanism of degradation of refractories with special emphasis on thermo-chemical and thermo-mechanical aspects. The heat transfer calculation and energy loss from the equipment surfaces has been addressed. A chapter in the book is dedicated for the management of refractory quality and the installation quality at the site. Maximizes reader understanding of the operating conditions in different equipments and how those are related to selection of refractories; Details the process variables and their influences on the performance of the refractories; Elucidates subtle points of refractory installation to ensure optimal performance; Presents heat transfer calculations and quality management protocols of refractory installation. Reinforces the concepts with many illustrations and tables.
Download or read book Monolithic Refractories written by Subrata Banerjee and published by John Wiley & Sons. This book was released on 1998-09-01 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This valuable handbook details the various monolithic refractories currently in use, and pays particular attention to their chemical and physical behaviors during manufacturing, installation, and the duty cycle. It addresses, from the practitioner's point of view, the critical aspects of reactions involved with the refractory body as it approaches the used temperature with the processing environment. To ensure optimum performance, it describes the application, installation, and design of refractory components. The handbook includes suitable tables and figures, and provides an historical perspective on the evolution of the refractory industry. Practicing ceramic engineers, scientists, raw material suppliers, and research and development personnel in the refractory manufacturing industry will find this book invaluable. Also suitable as a reference for courses in ceramic engineering specializing in refractories.
Download or read book Mechanical Properties of Ceramics written by John B. Wachtman and published by John Wiley & Sons. This book was released on 2009-08-13 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive and Self-Contained Treatment of the Theory and Practical Applications of Ceramic Materials When failure occurs in ceramic materials, it is often catastrophic, instantaneous, and total. Now in its Second Edition, this important book arms readers with a thorough and accurate understanding of the causes of these failures and how to design ceramics for failure avoidance. It systematically covers: Stress and strain Types of mechanical behavior Strength of defect-free solids Linear elastic fracture mechanics Measurements of elasticity, strength, and fracture toughness Subcritical crack propagation Toughening mechanisms in ceramics Effects of microstructure on toughness and strength Cyclic fatigue of ceramics Thermal stress and thermal shock in ceramics Fractography Dislocation and plastic deformation in ceramics Creep and superplasticity of ceramics Creep rupture at high temperatures and safe life design Hardness and wear And more While maintaining the first edition's reputation for being an indispensable professional resource, this new edition has been updated with sketches, explanations, figures, tables, summaries, and problem sets to make it more student-friendly as a textbook in undergraduate and graduate courses on the mechanical properties of ceramics.
Download or read book An Introduction to Applied Anisotropic Elasticity written by R. F. S. Hearmon and published by . This book was released on 1961 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Ceramics and Refractories written by A. O. Surendranathan and published by CRC Press. This book was released on 2014-12-10 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: All Refractories Are Ceramics but Not All Ceramics Are Refractories Ceramics and refractories cover a wide range of fields and applications, and their relevance can be traced as far back as 24,000 BC to the first man-made piece of earthenware, and as recently as the late 1900s when ceramics and ceramic matrix composites were developed to withstand ultra-high temperatures. Beginning with a detailed history of ceramics, An Introduction to Ceramics and Refractories examines every aspect of ceramics and refractories, and explores the connection between them. The book establishes refractories as a class of ceramics with high fusion points, introduces the fundamentals of refractories and ceramics, and also addresses several applications for each. Understand Ceramic Properties and Refractory Behavior The book details applications for natural and synthetic ceramics, as well as traditional and engineering applications. It focuses on the various thermal and thermo-mechanical properties of ceramics, classifies refractories, describes the principles of thermodynamics as applied to refractories, and highlights new developments and applications in the ceramic and refractory fields. It also presents end-of-chapter problems and a relevant case study. Divided into three sections, this text: Introduces and details the applications of ceramics and refractories Discusses the selection of materials and the two stages in selection Describes the phase equilibriums in ceramic and refractory systems Outlines the three important systems: unary, binary, and ternary Considers corrosion of ceramics and refractories, failures in ceramics and refractories, and the design aspects Addresses bonding, structures of ceramics, defects in ceramics, and ceramics’ microstructures Covers the production of ceramic powders starting from the raw materials Explains four forming methods Highlights three types of thermal treatments Defines mechanical properties, and thermal and thermo-mechanical properties Classifies materials and designates classes Addressing topics that include corrosion, applications, thermal properties, and types of refractories, An Introduction to Ceramics and Refractories provides you with a basic knowledge of the fundamentals of refractories and ceramics, and presents a clear connection between refractory behavior and ceramic properties to the practicing engineer.
Download or read book Refractory Technology written by Ritwik Sarkar and published by CRC Press. This book was released on 2023-08-11 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the refractories from different fundamental aspects, even with the support of phase diagrams, and also details the prominent applications of these industrial materials. The initial chapters cover fundamentals of refractories, classifications, properties, and testing, while later chapters describe different common shaped and unshaped refractories in detail and special refractories in a concise manner. The second edition includes new classifications, microstructures, the effect of impurities with binary and ternary phase diagrams, and recent trends in refractories including homework problems and an updated bibliography. Features: Provides exclusive material on refractories Discusses detailed descriptions of different shaped and unshaped refractories Covers concepts like environmental issues, recycling, and nanotechnology Explores details on testing and specifications including thermochemical and corrosion behavior Includes a separate chapter on trends of refractories and other issues This book is aimed at junior/senior undergraduate students and researchers of ceramics, metallurgical engineering, and refractories.
Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.
Download or read book Ceramic and Glass Materials written by James F. Shackelford and published by Springer Science & Business Media. This book was released on 2008-04-12 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a concise, up-to-date book that covers a wide range of important ceramic materials used in modern technology. Chapters provide essential information on the nature of these key ceramic raw materials including their structure, properties, processing methods and applications in engineering and technology. Treatment is provided on materials such as alumina, aluminates, Andalusite, kyanite, and sillimanite. The chapter authors are leading experts in the field of ceramic materials. An ideal text for graduate students and practising engineers in ceramic engineering, metallurgy, and materials science and engineering.
Download or read book refractories and furnaces new options and new values written by and published by Allied Publishers. This book was released on with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
