Download or read book Microstructure and Mechanical Properties of Structural Metals and Alloys written by Andrey Belyakov and published by MDPI. This book was released on 2019-06-24 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers collected in this special issue clearly reflect the modern research trends in materials science. These fields of specific attention are high-Mn TWIP steels, high-Cr heat resistant steels, aluminum alloys, ultrafine grained materials including those developed by severe plastic deformation, and high-entropy alloys. The major portion of the collected papers is focused on the mechanisms of microstructure evolution and the mechanical properties of metallic materials subjected to various thermo-mechanical, deformation or heat treatments. Another large portion of the studies is aimed on the elaboration of alloying design of advanced steels and alloys. The changes in phase content, transformation and particle precipitation and their effect on the properties are also broadly presented in this collection, including the microstructure/property changes caused by irradiation.

Download or read book High chromium Ferritic and Martensitic Steels for Nuclear Applications written by R. L. Klueh and published by ASTM International. This book was released on 2001-01-01 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph reviews the development of high-chromium ferritic/martensitic steels for exposure to the high-energy neutron environment of a fission or fusion reactor, and considers their potential use as a component material. The basic properties of the steels under non-nuclear conditions are provi

Download or read book Fundamentals of Radiation Materials Science written by GARY S. WAS and published by Springer. This book was released on 2016-07-08 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised second edition of this established text offers readers a significantly expanded introduction to the effects of radiation on metals and alloys. It describes the various processes that occur when energetic particles strike a solid, inducing changes to the physical and mechanical properties of the material. Specifically it covers particle interaction with the metals and alloys used in nuclear reactor cores and hence subject to intense radiation fields. It describes the basics of particle-atom interaction for a range of particle types, the amount and spatial extent of the resulting radiation damage, the physical effects of irradiation and the changes in mechanical behavior of irradiated metals and alloys. Updated throughout, some major enhancements for the new edition include improved treatment of low- and intermediate-energy elastic collisions and stopping power, expanded sections on molecular dynamics and kinetic Monte Carlo methodologies describing collision cascade evolution, new treatment of the multi-frequency model of diffusion, numerous examples of RIS in austenitic and ferritic-martensitic alloys, expanded treatment of in-cascade defect clustering, cluster evolution, and cluster mobility, new discussion of void behavior near grain boundaries, a new section on ion beam assisted deposition, and reorganization of hardening, creep and fracture of irradiated materials (Chaps 12-14) to provide a smoother and more integrated transition between the topics. The book also contains two new chapters. Chapter 15 focuses on the fundamentals of corrosion and stress corrosion cracking, covering forms of corrosion, corrosion thermodynamics, corrosion kinetics, polarization theory, passivity, crevice corrosion, and stress corrosion cracking. Chapter 16 extends this treatment and considers the effects of irradiation on corrosion and environmentally assisted corrosion, including the effects of irradiation on water chemistry and the mechanisms of irradiation-induced stress corrosion cracking. The book maintains the previous style, concepts are developed systematically and quantitatively, supported by worked examples, references for further reading and end-of-chapter problem sets. Aimed primarily at students of materials sciences and nuclear engineering, the book will also provide a valuable resource for academic and industrial research professionals. Reviews of the first edition: "...nomenclature, problems and separate bibliography at the end of each chapter allow to the reader to reach a straightforward understanding of the subject, part by part. ... this book is very pleasant to read, well documented and can be seen as a very good introduction to the effects of irradiation on matter, or as a good references compilation for experimented readers." - Pauly Nicolas, Physicalia Magazine, Vol. 30 (1), 2008 “The text provides enough fundamental material to explain the science and theory behind radiation effects in solids, but is also written at a high enough level to be useful for professional scientists. Its organization suits a graduate level materials or nuclear science course... the text was written by a noted expert and active researcher in the field of radiation effects in metals, the selection and organization of the material is excellent... may well become a necessary reference for graduate students and researchers in radiation materials science.” - L.M. Dougherty, 07/11/2008, JOM, the Member Journal of The Minerals, Metals and Materials Society.

Download or read book Radiation induced Changes in Microstructure written by F. A. Garner and published by ASTM International. This book was released on 1987 with total page 919 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Materials for Generation IV Nuclear Reactors written by Pascal Yvon and published by Woodhead Publishing. This book was released on 2016-08-27 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operating at a high level of fuel efficiency, safety, proliferation-resistance, sustainability and cost, generation IV nuclear reactors promise enhanced features to an energy resource which is already seen as an outstanding source of reliable base load power. The performance and reliability of materials when subjected to the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors are essential areas of study, as key considerations for the successful development of generation IV reactors are suitable structural materials for both in-core and out-of-core applications. Structural Materials for Generation IV Nuclear Reactors explores the current state-of-the art in these areas. Part One reviews the materials, requirements and challenges in generation IV systems. Part Two presents the core materials with chapters on irradiation resistant austenitic steels, ODS/FM steels and refractory metals amongst others. Part Three looks at out-of-core materials. Structural Materials for Generation IV Nuclear Reactors is an essential reference text for professional scientists, engineers and postgraduate researchers involved in the development of generation IV nuclear reactors. - Introduces the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors and implications for structural materials - Contains chapters on the key core and out-of-core materials, from steels to advanced micro-laminates - Written by an expert in that particular area

Download or read book Structural Alloys for Nuclear Energy Applications written by Robert Odette and published by Newnes. This book was released on 2019-08-15 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-performance alloys that can withstand operation in hazardous nuclear environments are critical to presentday in-service reactor support and maintenance and are foundational for reactor concepts of the future. With commercial nuclear energy vendors and operators facing the retirement of staff during the coming decades, much of the scholarly knowledge of nuclear materials pursuant to appropriate, impactful, and safe usage is at risk. Led by the multi-award winning editorial team of G. Robert Odette (UCSB) and Steven J. Zinkle (UTK/ORNL) and with contributions from leaders of each alloy discipline, Structural Alloys for Nuclear Energy Applications aids the next generation of researchers and industry staff developing and maintaining steels, nickel-base alloys, zirconium alloys, and other structural alloys in nuclear energy applications. This authoritative reference is a critical acquisition for institutions and individuals seeking state-of-the-art knowledge aided by the editors' unique personal insight from decades of frontline research, engineering and management. - Focuses on in-service irradiation, thermal, mechanical, and chemical performance capabilities. - Covers the use of steels and other structural alloys in current fission technology, leading edge Generation-IV fission reactors, and future fusion power reactors. - Provides a critical and comprehensive review of the state-of-the-art experimental knowledge base of reactor materials, for applications ranging from engineering safety and lifetime assessments to supporting the development of advanced computational models.

Download or read book Radiation Damage in Materials written by Yongqiang Wang and published by MDPI. This book was released on 2020-12-28 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complexity of radiation damage effects in materials that are used in various irradiation environments stems from the fundamental particle–solid interactions and the subsequent damage recovery dynamics after the collision cascades, which involves multiple length and time scales. Adding to this complexity are the transmuted impurities that are unavoidable from accompanying nuclear processes. Helium is one such impurity that plays an important and unique role in controlling the microstructure and properties of materials used in fast fission reactors, plasma-facing and structural materials in fusion devices, spallation neutron target designs, actinides, tritium-containing materials, and nuclear waste. Their ultra-low solubility in virtually all solids forces He atoms to self-precipitate into small bubbles that become nucleation sites for further void growth under radiation-induced vacancy supersaturations, resulting in material swelling and high-temperature He embrittlement, as well as surface blistering under low-energy and high-flux He bombardment. This Special Issue, “Radiation Damage in Materials—Helium Effects”, contains review articles and full-length papers on new irradiation material research activities and novel material ideas using experimental and/or modeling approaches. These studies elucidate the interactions of helium with various extreme environments and tailored nanostructures, as well as their impact on microstructural evolution and material properties.

Download or read book Effects of Radiation on Materials written by N. H. Packan and published by ASTM International. This book was released on 1990 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Effects of Radiation on Materials: Fourteenth International Symposium was presented at Andover, MA, June 1988. The symposium was sponsored by ASTM Committee E-10 on Nuclear Technology and Applications. The papers from the first three days of the symposium appear in the two volumes of this publication. Volume I encompasses radiation damage- induced microstructures; point defect, solute, and gas atom effects; atomic-level measurement techniques; and applications of theory. Volume II includes mechanical behavior, all papers dealing with pressure-vessel steels, breeder reactor components, dosimetry, and nuclear fuels. The fourth day of the symposium was devoted to the single topic of reduced-activation materials (see TK9204). The two volumes are separately sold at $127 and $128 respectively; each is independently indexed. Annotation copyrighted by Book News, Inc., Portland, OR.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1102 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bainite and Martensite written by Carlos Garcia-Mateo and published by MDPI. This book was released on 2020-05-27 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: The microstructures of both martensite and bainite, although sharing some common features, depict a plethora of subtle differences that made them unique when studied in further detail. Tailoring the final properties of a microstructure based on one or the other as well as in combination with others and exploring more sophisticated concepts, such as Q&P and nanostructured bainite, are the topics which are the focus of research around the world. In understanding the key microstructural parameters controlling the final properties as well as definition of adequate process parameters to attain the desired microstructures requires that a proper understanding of the mechanism ruling their transformation and a detailed characterization first be acheived. The development of new and powerful scientific techniques and equipment (EBSD, APT, HRTEM, etc.) allow us to gain fundamental insights that help to establish some of the principles by which those microstructures are known. The developments accompanying such findings lead to further developments and intensive research providing the required metallurgical support.

Download or read book Comprehensive Nuclear Materials written by and published by Elsevier. This book was released on 2020-07-22 with total page 4871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials in a nuclear environment are exposed to extreme conditions of radiation, temperature and/or corrosion, and in many cases the combination of these makes the material behavior very different from conventional materials. This is evident for the four major technological challenges the nuclear technology domain is facing currently: (i) long-term operation of existing Generation II nuclear power plants, (ii) the design of the next generation reactors (Generation IV), (iii) the construction of the ITER fusion reactor in Cadarache (France), (iv) and the intermediate and final disposal of nuclear waste. In order to address these challenges, engineers and designers need to know the properties of a wide variety of materials under these conditions and to understand the underlying processes affecting changes in their behavior, in order to assess their performance and to determine the limits of operation. Comprehensive Nuclear Materials, Second Edition, Seven Volume Set provides broad ranging, validated summaries of all the major topics in the field of nuclear material research for fission as well as fusion reactor systems. Attention is given to the fundamental scientific aspects of nuclear materials: fuel and structural materials for fission reactors, waste materials, and materials for fusion reactors. The articles are written at a level that allows undergraduate students to understand the material, while providing active researchers with a ready reference resource of information. Most of the chapters from the first Edition have been revised and updated and a significant number of new topics are covered in completely new material. During the ten years between the two editions, the challenge for applications of nuclear materials has been significantly impacted by world events, public awareness, and technological innovation. Materials play a key role as enablers of new technologies, and we trust that this new edition of Comprehensive Nuclear Materials has captured the key recent developments. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environments Comprehensive resource for up-to-date and authoritative information which is not always available elsewhere, even in journals Provides an in-depth treatment of materials modeling and simulation, with a specific focus on nuclear issues Serves as an excellent entry point for students and researchers new to the field

Download or read book High Entropy Alloys written by Ghulam Yasin and published by Elsevier. This book was released on 2024-07-26 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Entropy Alloys: Design, Manufacturing, and Emerging Applications presents cutting-edge advances in the field of these materials, covering their mechanics, methods of manufacturing, and applications, all while emphasizing the link between their structure/microstructure and functional properties. The book starts with a section on the fundamentals of high-entropy alloys (HEAs), with chapters discussing their thermodynamics, subgroups (transition metal; refractory; ceramics; metallic glasses and more), physical metallurgy, and microstructural characterization. The next section features chapters which look at manufacturing processes of HEAs, such as liquid metallurgy synthesis, in-situ synthesis, additive manufacturing, machine learning, friction stir welding, and fabrication of coatings for HEAs. The final section of the book covers applications of these materials, including their use as irradiation-resistant structural materials, catalyst materials, electrode materials, HEAs for solid hydrogen storage, and more. The book is a key resource for academic researchers, grad students, and industry professionals working with HEAs across a range of disciplines and applications including aerospace, functional materials, catalyst materials, gas storage, sensing, super-conducting materials, biomedical, civil engineering, energy storage, and energy materials. - Covers the mechanics, manufacturing, and applications of functionally-oriented high-entropy alloys (HEAs) - Discusses the metallurgical composition of HEAs, their microstructural characterization, thermal stability, and how to manufacture them via powder metallurgy, additive manufacturing, and friction stir welding - Reviews applications of HEAs such as for irradiation-resistant structural materials, in biomedical settings, as catalyst materials, for solid hydrogen storage, and more

Download or read book Microstructural Processes in Irradiated Materials written by and published by . This book was released on 1998 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fusion Energy Update written by and published by . This book was released on 1979 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Physics Briefs written by and published by . This book was released on 1994 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effects of Radiation on Materials written by Stan T. Rosinski and published by ASTM International. This book was released on 2001 with total page 879 pages. Available in PDF, EPUB and Kindle. Book excerpt: