Download or read book Microstructural Evolution during Forging of Ti 6Al 4V Alloy written by and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Microstructural Evolution of Commercial Purity Ti and Superplasticity of Ti 6Al 4V Alloy Processed by Equal Channel Angular Extrusion written by and published by . This book was released on 2006 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project focused on deformation processing, microstructural development, and mechanical properties of Ti and Ti-6Al-4V alloys. Specific tasks included: (1) Study superplastic deformation of a Ti-6Al-4V alloy that have been processed by equal channel angular extrusion and relate the deformation mechanism to the enhancement of superplasticity, and (2) Examine the effect of strain path for Ti fabricated by equal channel angular extrusion and uniaxial compression, with a special focus on the improved mechanical properties of the deformed Ti. As a part of the report, two papers were published in Materials Science and Engineering A (vol. A410-411, 2005, 156-159) and Metallurgical and Materials Transactions A (vol.37, 2006, 381-391). The work was begun under AOARD 034023, "Microstructure development of ultrafine grained Ti and superplasticity of Ti-6Al-4V alloy." Most of that effort was devoted to Ti-6Al-4V alloy. Much progress has been made over the more than two years of effort. We propose to complete our studies by studying, in detail, deformation mechanisms for the enhanced superplasticity in the ultrafine grained Ti-6Al-4V alloy with a special focus on the role of non-equilibrium grain boundaries.
Download or read book Forging Property Processing Map and Mesoscale Microstructural Evolution Modeling of a Ti 17 Alloy with a Lamellar Starting Microstructure written by and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 13th World Conference on Titanium written by Vasisht Venkatesh and published by John Wiley & Sons. This book was released on 2016-04-26 with total page 4024 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings of the 13th World Conference on Titanium.
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Hot Working Guide written by Y. V. R. K. Prasad and published by ASM International. This book was released on 1997-01-01 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique source book with flow stress data for hot working, processing maps with metallurgical interpretation and optimum processing conditions for metals, alloys, intermetallics, and metal matrix composites. The use of this book replaces the expensive and time consuming trial and error methods in process design and product development.
Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.
Download or read book Microstructure Evolution in Metal Forming Processes written by J Lin and published by Elsevier. This book was released on 2012-07-09 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monitoring and control of microstructure evolution in metal processing is essential in developing the right properties in a metal. Microstructure evolution in metal forming processes summarises the wealth of recent research on the mechanisms, modelling and control of microstructure evolution during metal forming processes.Part one reviews the general principles involved in understanding and controlling microstructure evolution in metal forming. Techniques for modelling microstructure and optimising processes are explored, along with recrystallisation, grain growth, and severe plastic deformation. Microstructure evolution in the processing of steel is the focus of part two, which reviews the modelling of phase transformations in steel, unified constitutive equations and work hardening in microalloyed steels. Part three examines microstructure evolution in the processing of other metals, including ageing behaviour in the processing of aluminium and microstructure control in processing nickel, titanium and other special alloys.With its distinguished editors and international team of expert contributors, Microstructure evolution in metal forming processes is an invaluable reference tool for metal processors and those using steels and other metals, as well as an essential guide for academics and students involved in fundamental metal research. - Summarises the wealth of recent research on the mechanisms, modelling and control of microstructure evolution during metal forming processes - Comprehensively discusses microstructure evolution in the processing of steel and reviews the modelling of phase transformations in steel, unified constitutive equations and work hardening in microalloyed steels - Examines microstructure evolution in the processing of other materials, including ageing behaviour in the processing of aluminium
Download or read book The Science Technology and Application of Titanium written by R. I. Jaffee and published by Elsevier. This book was released on 2013-09-24 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science, Technology and Application of Titanium contains the proceedings of an International Conference organized by the Institute of Metals, The Metallurgical Society of AIME, and the American Society for Metals in association with the Japan Institute of Metals and the Academy of Sciences of the USSR and held at the Royal Festival Hall in London, on May 21-24, 1968. The papers explore scientific and technological developments as well as applications of titanium and cover topics ranging from processing of titanium to its chemical and environmental behavior, physics, thermodynamics, and kinetics. Deformation and fracture, phase transformations and heat treatment, and alloying are also discussed. This book is comprised of 114 chapters and begins with an overview of the titanium industry in Europe and the United States. The reader is then introduced to primary and secondary fabrication of titanium; corrosion and oxidation; physical properties of titanium alloys; interaction of titanium with elements of the periodic system; and elastic interactions between dislocations and twin and grain boundaries in titanium. The crystallography of deformation twinning in titanium is also examined, along with superplasticity and transformation plasticity in titanium. The remaining chapters focus on interstitial strengthening of titanium alloys; mechanism of martensitic transformation in titanium and its alloys; phase relationships in titanium-oxygen alloys; strengthening of titanium alloys by shock deformation; and titanium hot forming. This monograph will be of interest to chemists and metallurgists.
Download or read book TMS 2018 147th Annual Meeting Exhibition Supplemental Proceedings written by The Minerals, Metals & Materials Society and published by Springer. This book was released on 2018-02-03 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection features papers presented at the 147th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.
Download or read book Tribology in Materials and Manufacturing written by Amar Patnaik and published by BoD – Books on Demand. This book was released on 2021-02-03 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology in Materials and Manufacturing - Wear, Friction and Lubrication brings an interdisciplinary perspective to accomplish a more detailed understanding of tribological assessments, friction, lubrication, and wear in advanced manufacturing. Chapters cover such topics as ionic liquids, non-textured and textured surfaces, green tribology, lubricants, tribolayers, and simulation of wear.
Download or read book Titanium Alloys written by W Sha and published by Elsevier. This book was released on 2009-04-29 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given their growing importance in the aerospace, automotive, sports and medical sectors, modelling the microstructure and properties of titanium and its alloys is a vital part of research into the development of new applications. This is the first time a book has been dedicated to modelling techniques for titanium.Part one discusses experimental techniques such as microscopy, synchrotron radiation X-ray diffraction and differential scanning calorimetry. Part two reviews physical modelling methods including thermodynamic modelling, the Johnson-Mehl-Avrami method, finite element modelling, the phase-field method, the cellular automata method, crystallographic and fracture behaviour of titanium aluminide and atomistic simulations of interfaces and dislocations relevant to TiAl. Part three covers neural network models and Part four examines surface engineering products. These include surface nitriding: phase composition, microstructure, mechanical properties, morphology and corrosion; nitriding: modelling of hardness profiles and kinetics; and aluminising: fabrication of Ti coatings by mechanical alloying.With its distinguished authors, Titanium alloys: Modelling of microstructure, properties and applications is a standard reference for industry and researchers concerned with titanium modelling, as well as users of titanium, titanium alloys and titanium aluminide in the aerospace, automotive, sports and medical implant sectors. - Comprehensively assesses modelling techniques for titanium, including experimental techniques such as microscopy and differential scanning calorimetry - Reviews physical modelling methods including thermodynamic modelling and finite element modelling - Examines surface engineering products with specific chapters focused on surface nitriding and aluminising
Download or read book Microstructural Evolution of Friction Stir Processed Ti 6Al 4V written by Paul Andrew Pavka and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: Friction stir welding has been developed over the past ten years to permit joining of high strength alloys that cannot be fusion welded. More recently friction stir processing (FSP) has been shown to alter the surface microstructure of a material by essentially in situ thermo mechanical processing. In this study we have used FSP to alter the surface microstructure of Ti-6Al-4V. In all trials, the friction stir processing (FSP) applied to the surface of cast +H.I.P. slabs has resulted in changing the coarse lamellae to small equiaxed [alpha] grains that are about 1 in diameter. This process leaves the coarse lamellar microstructure in the bulk of the material. These findings are believed to produce a microstructure that will have better fatigue strength than what was previously available from the cast + H.I.P. coarse microstructure. Orientation imaging microscopy (OIM) of the fine-grained, equiaxed process zone has shown that there is no preferred grain orientation. A new technique for locally measuring yield strength using small, in-situ compressive cylinders (pillars) has been used to determine the strength change between the fine grain and as-cast structure. Pillars made from focused ion beam milling (FIB) have demonstrated that the fine-grained stirred material is about 30% stronger than the as-cast material. Definition of the mechanism that controls the conversion from the lamellar structure to the equiaxed structure is still being developed, but several observations suggest that the -transus has not been exceeded. More work is being done to verify the fatigue strength of the new microstructure, and to develop a better understanding of the mechanism that controls the conversion process. This work is ongoing but the microstructure changes associated with FSP are described in here.
Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.
Download or read book Additive Manufacturing of Metals The Technology Materials Design and Production written by Li Yang and published by Springer. This book was released on 2017-05-11 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a unique guide to the three-dimensional (3D) printing of metals. It covers various aspects of additive, subtractive, and joining processes used to form three-dimensional parts with applications ranging from prototyping to production. Examining a variety of manufacturing technologies and their ability to produce both prototypes and functional production-quality parts, the individual chapters address metal components and discuss some of the important research challenges associated with the use of these technologies. As well as exploring the latest technologies currently under development, the book features unique sections on electron beam melting technology, material lifting, and the importance this science has in the engineering context. Presenting unique real-life case studies from industry, this book is also the first to offer the perspective of engineers who work in the field of aerospace and transportation systems, and who design components and manufacturing networks. Written by the leading experts in this field at universities and in industry, it provides a comprehensive textbook for students and an invaluable guide for practitioners
Download or read book Additive Manufacturing of Titanium Alloys written by Bhaskar Dutta and published by Butterworth-Heinemann. This book was released on 2016-06-17 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of Titanium Alloys: State of the Art, Challenges and Opportunities provides alternative methods to the conventional approach for the fabrication of the majority of titanium components produced via the cast and wrought technique, a process which involves a considerable amount of expensive machining. In contrast, the Additive Manufacturing (AM) approach allows very close to final part configuration to be directly fabricated minimizing machining cost, while achieving mechanical properties at least at cast and wrought levels. In addition, the book offers the benefit of significant savings through better material utilization for parts with high buy-to-fly ratios (ratio of initial stock mass to final part mass before and after manufacturing). As titanium additive manufacturing has attracted considerable attention from both academicians and technologists, and has already led to many applications in aerospace and terrestrial systems, as well as in the medical industry, this book explores the unique shape making capabilities and attractive mechanical properties which make titanium an ideal material for the additive manufacturing industry. - Includes coverage of the fundamentals of microstructural evolution in titanium alloys - Introduces readers to the various Additive Manufacturing Technologies, such as Powder Bed Fusion (PBF) and Directed Energy Deposition (DED) - Looks at the future of Titanium Additive Manufacturing - Provides a complete review of the science, technology, and applications of Titanium Additive Manufacturing (AM)
