Download or read book Microstructural Development of Titanium Modified Austenitic Stainless Steel Under Neutron Irradiation in HFIR Up to 57 Dpa written by S. Hamada and published by . This book was released on 1990 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Japanese prime candidate alloy (JPCA). a titanium-modified austenitic stainless steel, has shown good performance after irradiation in the high flux isotope reactor (HFIR) up to 34 dpa at 300 to 600°C, but considerable void swelling develops in solution annealed (SA) JPCA after irradiation to 57 dpa at 500°C. However, cold worked (CW) or cold worked and aged (CW + A) JPCA still demonstrates good performance after similar irradiation. Swelling resistance appears to depend strongly on the behavior of fine titanium-rich MC precipitates. This paper describes the microstructural evolution process observed in the JPCA steel during HFIR irradiation. The onset of rapid void swelling was related to MC precipitate dissolution, and the instability of the MC was interpreted in terms of a model involving the build and subsequent effects of a solute segregation zone in the matrix surrounding the precipitate particle.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effects of Radiation on Materials written by N. H. Packan and published by ASTM International. This book was released on 1990 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Effects of Radiation on Materials: Fourteenth International Symposium was presented at Andover, MA, June 1988. The symposium was sponsored by ASTM Committee E-10 on Nuclear Technology and Applications. The papers from the first three days of the symposium appear in the two volumes of this publication. Volume I encompasses radiation damage- induced microstructures; point defect, solute, and gas atom effects; atomic-level measurement techniques; and applications of theory. Volume II includes mechanical behavior, all papers dealing with pressure-vessel steels, breeder reactor components, dosimetry, and nuclear fuels. The fourth day of the symposium was devoted to the single topic of reduced-activation materials (see TK9204). The two volumes are separately sold at $127 and $128 respectively; each is independently indexed. Annotation copyrighted by Book News, Inc., Portland, OR.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1989 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Research Abstracts written by and published by . This book was released on 1989 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ASTM Special Technical Publication written by and published by . This book was released on 1990 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Government Reports Annual Index written by and published by . This book was released on 1989 with total page 1372 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Comprehensive Nuclear Materials written by and published by Elsevier. This book was released on 2020-07-22 with total page 4871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials in a nuclear environment are exposed to extreme conditions of radiation, temperature and/or corrosion, and in many cases the combination of these makes the material behavior very different from conventional materials. This is evident for the four major technological challenges the nuclear technology domain is facing currently: (i) long-term operation of existing Generation II nuclear power plants, (ii) the design of the next generation reactors (Generation IV), (iii) the construction of the ITER fusion reactor in Cadarache (France), (iv) and the intermediate and final disposal of nuclear waste. In order to address these challenges, engineers and designers need to know the properties of a wide variety of materials under these conditions and to understand the underlying processes affecting changes in their behavior, in order to assess their performance and to determine the limits of operation. Comprehensive Nuclear Materials, Second Edition, Seven Volume Set provides broad ranging, validated summaries of all the major topics in the field of nuclear material research for fission as well as fusion reactor systems. Attention is given to the fundamental scientific aspects of nuclear materials: fuel and structural materials for fission reactors, waste materials, and materials for fusion reactors. The articles are written at a level that allows undergraduate students to understand the material, while providing active researchers with a ready reference resource of information. Most of the chapters from the first Edition have been revised and updated and a significant number of new topics are covered in completely new material. During the ten years between the two editions, the challenge for applications of nuclear materials has been significantly impacted by world events, public awareness, and technological innovation. Materials play a key role as enablers of new technologies, and we trust that this new edition of Comprehensive Nuclear Materials has captured the key recent developments. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environments Comprehensive resource for up-to-date and authoritative information which is not always available elsewhere, even in journals Provides an in-depth treatment of materials modeling and simulation, with a specific focus on nuclear issues Serves as an excellent entry point for students and researchers new to the field

Download or read book Physics Briefs written by and published by . This book was released on 1991 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metals Abstracts written by and published by . This book was released on 1993 with total page 1218 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metals Abstracts Index written by and published by . This book was released on 1984 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1989 with total page 1106 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fusion Energy Update written by and published by . This book was released on 1985 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effects of Nickel on Microstructural Development and Microchemical Changes in Neutron Irradiated Fe Cr Mn Based Steels written by H. Takahashi and published by . This book was released on 1992 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructural changes and solute segregation in austenitic Fe-Cr-Mn-Ni alloys have been studied after neutron irradiation to 25 dpa (maximum) in FFTF/MOTA. Voids were nucleated in all of the specimens in the temperature range of 420 to 650°C, and a swelling peak was observed to form at 550°C. The void suppression effect of nickel additions did not occur in these alloys. Precipitates were formed in the matrix and/or on grain boundaries and were mostly identified as M23C6. The composition in the grain boundary area changed, and the chromium (Cr) concentration near the precipitates became higher. On the other hand, manganese and chromium were depleted, and nickel was enriched in the grain boundary area, but without precipitation. Other phases such as ferrite and sigma could not be recognized. Thus, it was revealed that the addition of nickel to Fe-Cr-Mn alloy stabilizes the austenite even in the grain boundary area where segregation is marked.

Download or read book Magnetic Fusion Energy Materials Technology Program Annual Progress Report for Period Ending June 30 1976 written by Oak Ridge National Laboratory. Metals and Ceramics Division and published by . This book was released on 1976 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book INIS Atomindex written by and published by . This book was released on 1988 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Influence of Silicon Or Titanium on the Microstructural Evolution of Fe Cr 35Ni Alloys Irradiated with Neutrons Or Self Ions written by H. Watanabe and published by . This book was released on 2000 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: A series of Fe-Cr-35Ni alloys was irradiated to doses ranging from 12 to 36 dpa with fast neutrons at 375-600°C and to 59-117 dpa at 675°C with Ni+ ions. The primary purpose of this study was to examine the effect of silicon and titanium on both microstructural evolution and the tendency of Fe-Cr-35Ni alloys to spinodally decompose during irradiation. As expected, the addition of these solutes suppresses void swelling and alters the microstructural evolution. They do not appear, however, to suppress the tendency toward spinodal-like decomposition, but only to change somewhat the microstructural consequences of the decomposition.