Download or read book Microstructural Chemical and Mechanical Characterization of Polymer Derived Hi Nicalon Fibers with Surface Coatings written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-05 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Room temperature tensile strengths of as-received Hi-Nicalon fibers and those having BN/SiC, p-BN/SiC, and p-B(Si)N/SiC surface coatings, deposited by chemical vapor deposition, were measured using an average fiber diameter of 13.5 microns. The Weibull statistical parameters were determined for each fiber. The average tensile strength of uncoated Hi-Nicalon on was 3.19 +/- 0.73 GPa with a Weibull modulus of 5.41. Strength of fibers coated with BN/SiC did not change. However, coat with p-BN/SiC and p-B(Si)N/SiC surface layers showed strength loss of approx. 10 and 35 percent, respectively, compared with as-received fibers. The elemental compositions of the fibers and the coatings were analyzed using scanning Auger microprobe and energy dispersive x-ray spectroscopy. The BN coating was contaminated with a large concentration of carbon and some oxygen. In contrast, p-BN, p-B(Si)N, and SiC coatings did not show any contamination. Microstructural analyses of the fibers and the coatings were done by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and selected area electron diffraction. Hi-Nicalon fiber consists of the P-SIC nanocrystals ranging in size from 1 to 30 nm embedded in an amorphous matrix. TEM analysis of the BN coating revealed four distinct layers with turbostatic structure. The p-BN layer was turbostratic and showed considerable preferred orientation. The p-B(Si)N was glassy and the silicon and boron were uniformly distributed. The silicon carbide coating was polycrystalline with a columnar structure along the growth direction. The p-B(Si)N/SiC coatings were more uniform, less defective and of better quality than the BN/SiC or the p-BN/SiC coatings. Bansal, Narottam P. and Chen, Yuan L. Glenn Research Center RTOP 523-21-31...
Download or read book Microstructural Chemical and Mechanical Characterization of Polymer Derived Hi Nicalon Fibers with Surface Coatings written by Narottam P. Bansal and published by . This book was released on 1998 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 2000 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Fibers and Coatings written by Committee on Advanced Fibers for High-Temperature Ceramic Composites and published by National Academies Press. This book was released on 1998-05-05 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature ceramic fibers are the key components of ceramic matrix composites (CMCs). Ceramic fiber properties (strength, temperature and creep resistance, for example)-along with the debonding characteristics of their coatings-determine the properties of CMCs. This report outlines the state of the art in high-temperature ceramic fibers and coatings, assesses fibers and coatings in terms of future needs, and recommends promising avenues of research. CMCs are also discussed in this report to provide a context for discussing high-temperature ceramic fibers and coatings.
Download or read book Mechanical Chemical and Microstructural Characterization of Monazite Coated Silicon Carbide Fibers written by Narottam P. Bansal and published by . This book was released on 2000 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensile strengths of as-received Hi-Nicalon and Sylramic fibers and those having monazite surface coatings, deposited by atmospheric pressure chemical vapor deposition, were measured at room temperature and the Weibull statistical parameters determined. The average tensile strengths of uncoated Hi-Nicalon and Sylramic fibers were 3.19 +/- 0.73 and 2.78 +/- 0.53 GPa with a Weibull modulus of 5.41 and 5.52, respectively. The monazite-coated Hi-Nicalon and Sylramic fibers showed strength loss of approx. 10 and 15 percent, respectively, compared with the as-received fibers. The elemental compositions of the fibers and the coatings were analyzed using scanning Auger microprobe and energy dispersive X-ray spectroscopy. The LaPO4 coating on Hi-Nicalon fibers was approximately stoichiometric and about 50 nm thick. The coating on the Sylramic fibers extended to a depth of about 100 to 150 nm. The coating may have been stoichiometric LaPO4 in the first 30 to 40 nm of the layer. However, the surface roughness of Sylramic fiber made this profile somewhat difficult to interpret. Microstructural analyses of the fibers and the coatings were done by scanning electron microscopy, transmission electron microscopy, and selected area electron diffraction.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Abstracts written by and published by . This book was released on 1999 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1994-02 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Experimentation written by K. A. Brownlee and published by Gadow Press. This book was released on 2007-03 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: PREFACE. THE Author of this very practical treatise on Scotch Loch - Fishing desires clearly that it may be of use to all who had it. He does not pretend to have written anything new, but to have attempted to put what he has to say in as readable a form as possible. Everything in the way of the history and habits of fish has been studiously avoided, and technicalities have been used as sparingly as possible. The writing of this book has afforded him pleasure in his leisure moments, and that pleasure would be much increased if he knew that the perusal of it would create any bond of sympathy between himself and the angling community in general. This section is interleaved with blank shects for the readers notes. The Author need hardly say that any suggestions addressed to the case of the publishers, will meet with consideration in a future edition. We do not pretend to write or enlarge upon a new subject. Much has been said and written-and well said and written too on the art of fishing but loch-fishing has been rather looked upon as a second-rate performance, and to dispel this idea is one of the objects for which this present treatise has been written. Far be it from us to say anything against fishing, lawfully practised in any form but many pent up in our large towns will bear us out when me say that, on the whole, a days loch-fishing is the most convenient. One great matter is, that the loch-fisher is depend- ent on nothing but enough wind to curl the water, -and on a large loch it is very seldom that a dead calm prevails all day, -and can make his arrangements for a day, weeks beforehand whereas the stream- fisher is dependent for a good take on the state of the water and however pleasant and easy it may be for one living near the banks of a good trout stream or river, it is quite another matter to arrange for a days river-fishing, if one is looking forward to a holiday at a date some weeks ahead. Providence may favour the expectant angler with a good day, and the water in order but experience has taught most of us that the good days are in the minority, and that, as is the case with our rapid running streams, -such as many of our northern streams are, -the water is either too large or too small, unless, as previously remarked, you live near at hand, and can catch it at its best. A common belief in regard to loch-fishing is, that the tyro and the experienced angler have nearly the same chance in fishing, -the one from the stern and the other from the bow of the same boat. Of all the absurd beliefs as to loch-fishing, this is one of the most absurd. Try it. Give the tyro either end of the boat he likes give him a cast of ally flies he may fancy, or even a cast similar to those which a crack may be using and if he catches one for every three the other has, he may consider himself very lucky. Of course there are lochs where the fish are not abundant, and a beginner may come across as many as an older fisher but we speak of lochs where there are fish to be caught, and where each has a fair chance. Again, it is said that the boatman has as much to do with catching trout in a loch as the angler. Well, we dont deny that. In an untried loch it is necessary to have the guidance of a good boatman but the same argument holds good as to stream-fishing...
Download or read book Thermal Stability of Hi Nicalon SiC Fiber in Nitrogen and Silicon Environments written by Ramakrishna T. Bhatt and published by . This book was released on 1995 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Meeting Abstracts written by American Ceramic Society. Meeting and published by . This book was released on 1998 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extended Abstracts written by Electrochemical Society and published by . This book was released on 1989 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Ceramic Composites written by Narottam P. Bansal and published by Springer Science & Business Media. This book was released on 2006-08-25 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This valuable handbook has been compiled by internationally renowned researchers in the field. Each chapter is focused on a specific composite system or a class of composites, presenting a detailed description of processing, properties, and applications.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1990 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Fiber Matrix Interface and Its Composition on Mechanical Properties of Hi Nicalon Celsian Composites written by Narottam P. Bansal and published by . This book was released on 1999 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ECASIA 93 written by D. Briggs and published by . This book was released on 1994 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renowned experts and academics in the field describe the use of surface and interface analytical methods to solve numerous technological and industrial problems. Features new developments in these methods as well as related microanalytical approaches. Includes advances in data analysis, interpretation and such problems as radiation effects, calibration and quantification.
