Download or read book Microstructural Characterization of Laser Surface Melted Fe TiC Alloys written by David A. Gilbert and published by . This book was released on 1979 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of Microstructure and Strengthening Mechanisms in Laser Surface Alloyed Fe Cr and Fe C Cr Alloy Systems written by W. E. Wood and published by . This book was released on 1983 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effects of rapid melting and subsequent quenching on the solidification behavior and solid state transformation structures of laser surface alloyed Fe-Cr, Fe-Ni, Fe-Cr-Ni and Fe-C-Cr systems were investigated as functions of composition (0-50%Cr, 0-20%Ni, 0-20%Cr/Ni, 0-1C%) and cooling rate. The microstructures were characterized by optical, scanning and thin foil transmission electron microscopy. The effects of laser parameters (laser power, beam size and scan rate) and coating variables (composition, thickness and morphology) on the penetration depth and melt width were also evaluated. The microstructures of Fe-Cr alloys were ferritic in nature, irrespective of the composition (0-50%Cr) and cooling rate. The transformation structures of Fe-5%Ni and Fe-6%Cr-2%Ni alloys exhibited a mixture of martensite and ferrite. The transformation structures of Fe-C-Cr alloys were studied as functions of the carbon (0.2-1.0%C) and chromium contents (0-40%Cr). The rapid solidification effects including the retention of supersaturated austenite, lack of carbide precipitation and the morphology of phases are discussed as functions of alloy content and cooling rate.
Download or read book Microstructural Characterization of Laser Surface Alloyed Iron written by P. A. Molian and published by . This book was released on 1980 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Surface Engineering written by Jonathan R. Lawrence and published by Elsevier. This book was released on 2014-10-02 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers can alter the surface composition and properties of materials in a highly controllable way, which makes them efficient and cost-effective tools for surface engineering. This book provides an overview of the different techniques, the laser-material interactions and the advantages and disadvantages for different applications. Part one looks at laser heat treatment, part two covers laser additive manufacturing such as laser-enhanced electroplating, and part three discusses laser micromachining, structuring and surface modification. Chemical and biological applications of laser surface engineering are explored in part four, including ways to improve the surface corrosion properties of metals. Provides an overview of thermal surface treatments using lasers, including the treatment of steels, light metal alloys, polycrystalline silicon and technical ceramics Addresses the development of new metallic materials, innovations in laser cladding and direct metal deposition, and the fabrication of tuneable micro- and nano-scale surface structures Chapters also cover laser structuring, surface modification, and the chemical and biological applications of laser surface engineering
Download or read book Selective Laser Melting written by Prashanth Konda Gokuldoss and published by MDPI. This book was released on 2020-04-03 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) is one of the manufacturing processes that warrants the attention of industrialists, researchers, and scientists. AM has the ability to fabricate materials to produce parts with complex shapes without any theoretical restrictions combined with added functionalities. Selective laser melting (SLM), also known as laser-based powder bed processing (LPBF), is one of the main AM process that can be used to fabricate wide variety of materials that are Al-, Ti-, Fe-, Ni-, Co-, W-, Ag-, and Au-based, etc. However, several challenges need to be addressed systematically, such as development of new materials that suit the SLM process conditions so the process capabilities can be fully used to produce new properties in these materials. Other issues in the field are the lack of microstructure–property correlations, premature failure, etc. Accordingly, this Special Issue (book) focuses mainly on the microstructure-correlation in three different alloys: AlSi10Mg, Ti6Al4V, and 304L stainless steel, where six articles are presented. Hence, this Special Issue outlines microstructure–property correlations in the SLM processed materials and provides a value addition to the field of AM.
Download or read book Laser Processing Surface Treatment and Film Deposition written by J. Mazumder and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis of nonequilibrium metallic phases has been an area of great interest to the materials processing community since early 1960. Inherent rapid cooling rates in laser processing are being used to engineer non-equilibrium microstructures which cannot be rivaled by other processes. This lecture will discuss the phenomena involved and its application in designing materials with tailored properties. What is non-equilibrium Synthesis? This is a synthesis method to produce binary or higher order materials where kinetics of the pro cess affects the transport of the constituent elements during phase transformation resulting in a composition or crystallographic configuration which is different from what is observed when the elements arranges themselves with the lowest possible Gibbs Free energy, which is the equilibrium condition. Figure 1 illustrates the phenomena. Phase diagram under equilibrium condition is illustrated by the solid line whereas the no-equilibrium phase diagram is represented by the dotted line. One can observe the shrinkage of the phase field under non-equilibrium condition. Any alloy composition between the solidus lines of the equilibrium and non-equilibrium phase diagram will be a non equilibrium alloys with extended solid solution.
Download or read book Surface Hardening by Laser Skin Melting written by Peter R. Strutt and published by . This book was released on 1979 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: A basic study has been initiated on the microstructural characterization of rapid quenched iron-base alloys produced by electron beam-glazing and laser-glazing. The quantitative effect of processing parameters (i. e., beam velocity, power, etc.) on melt zone geometry have been determined using M2 tool steel as a reference material. The conditions range from superficial surface melting with correspondingly high cooling rates (similar to 1/1000000 degrees centigrade) to the deep penetration mode, with a cooling rate of similar to 1/1000 degrees centigrade. The comparison of electron beam and laser-glazing was particularly striking, since the power efficiency in surface melting was ten times greater using an electron beam. Furthermore, electron beam-glazing produced (1) a uniform and smooth surface, (2) a constant depth of melting, and (3) a homogeneous microstructure. These highly desirable features were not achieved to the same degree in the laser-glazing experiments.
Download or read book Sintering Applications written by Burcu Ertug and published by BoD – Books on Demand. This book was released on 2013-02-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering is one of the final stages of ceramics fabrication and is used to increase the strength of the compacted material. In the Sintering of Ceramics section, the fabrication of electronic ceramics and glass-ceramics were presented. Especially dielectric properties were focused on. In other chapters, sintering behaviour of ceramic tiles and nano-alumina were investigated. Apart from oxides, the sintering of non-oxide ceramics was examined. Sintering the metals in a controlled atmosphere furnace aims to bond the particles together metallurgically. In the Sintering of Metals section, two sections dealt with copper containing structures. The sintering of titanium alloys is another topic focused in this section. The chapter on lead and zinc covers the sintering in the field of extractive metallurgy. Finally two more chapter focus on the basics of sintering,i.e viscous flow and spark plasma sintering.
Download or read book Heat Transfer written by Salim Newaz Kazi and published by BoD – Books on Demand. This book was released on 2023-02 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the fundamentals, enhancements, applications, and modeling of heat transfer phenomena. Topics covered include heat transfer equations and applications in the estimation of heat energy transportation, heat transfer in specific applications, microchannel flow, condensation of refrigerants in modified heat exchanger tubes, alteration of tube surface texture for augmentation of heat transfer, boiling, etc. Also considered are fouling mitigation approaches to prolong heat exchanger operation, as well as tube coatings, heat exchanger digital twins, and various surface alteration techniques. Double-pass solar air heating and phenomena including heat transfer through thin liquid film and surface texture alteration for boiling heat transfer are discussed.
Download or read book Laser Processing of Engineering Materials written by John Ion and published by Elsevier. This book was released on 2005-03-22 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complete guide to understanding and using lasers in material processing!Lasers are now an integral part of modern society, providing extraordinary opportunities for innovation in an ever-widening range of material processing and manufacturing applications. The study of laser material processing is a core element of many materials and manufacturing courses at undergraduate and postgraduate level. As a consequence, there is now a vast amount of research on the theory and application of lasers to be absorbed by students, industrial researchers, practising engineers and production managers. Written by an acknowledged expert in the field with over twenty years' experience in laser processing, John Ion distils cutting-edge information and research into a single key text. Essential for anyone studying or working with lasers, Laser Processing of Engineering Materials provides a clear explanation of the underlying principles, including physics, chemistry and materials science, along with a framework of available laser processes and their distinguishing features and variables. This book delivers the knowledge needed to understand and apply lasers to the processing of engineering materials, and is highly recommended as a valuable guide to this revolutionary manufacturing technology. The first single volume text that treats this core engineering subject in a systematic manner Covers the principles, practice and application of lasers in all contemporary industrial processes; packed with examples, materials data and analysis, and modelling techniques
Download or read book Tribology and Surface Engineering written by Aleksander Lisiecki and published by MDPI. This book was released on 2020-01-15 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers very important issues, not only scientific in nature but, ultimately, for industry and the economy. Wear and deterioration of surface properties during operation is a natural and unavoidable phenomenon. However, minimizing the degree of wear is of great importance for the entire economy, as illustrated by the example of the US economy, for which the loss of natural resources as a direct cause of friction and wear exceeds 6% of the Gross National Product. This book showcases the valuable knowledge revealed from both theoretical and practical research results in the field of advanced technologies of coatings and surface modification, as well as wear and tribological characteristics of advanced materials and surface layers. Therefore, it is hoped that this book will be a valuable resource and helpful tool for scientists, engineers, and students in the field of surface engineering, materials science, and manufacturing engineering.
Download or read book Laser based Technologies for Sustainable Manufacturing written by Avinash Kumar and published by CRC Press. This book was released on 2023-07-26 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides scientific and technological insights on novel techniques of design and manufacturing using laser technologies. It showcases applications of laser micromachining in the biomedical industry, laser-based manufacturing processes in aerospace engineering, and high-precision laser-cutting in the home appliance sector. Features: Each chapter discusses a specific engineering problem and showcases its numerical, and experimental solution Provides scientific and technological insights on novel routes of design and manufacturing using laser technologies Synergizes exploration related to the various properties and functionalities through extensive theoretical and numerical modeling Highlights current issues, developments, and constraints in additive manufacturing Discusses applications of laser cutting machines in the manufacturing industry and laser micromachining for the biomedical industry The text discusses optical, and laser-based green manufacturing technologies and their application in diverse engineering fields including mechanical, electrical, biomedical, and computer. It further covers sustainability issues in laser-based manufacturing technologies and the development of laser-based ultra-precision manufacturing techniques. The text also discusses the use of artificial intelligence and machine learning in laser-based manufacturing techniques. It will serve as an ideal reference text for senior undergraduate, graduate students, and researchers in fields including mechanical engineering, aerospace engineering, manufacturing engineering, and production engineering.
Download or read book Proceedings of DAE BRNS National Laser Symposium written by and published by Allied Publishers. This book was released on 2002 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer. This book was released on 1982-02-01 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing. house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 25 (thesis year 1980) a total of 10,308 theses titles from 27 Canadian and 214 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 25 reports theses submitted in 1980, on occasion, certain universities do report theses submitted in previous years but not reported at the time.
Download or read book Laser Surface Modification of Alloys for Corrosion and Erosion Resistance written by C T Kwok and published by Elsevier. This book was released on 2012-03-20 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and erosion processes often occur synergistically to cause serious damage to metal alloys. Laser surface modification techniques such as laser surface melting or alloying are being increasingly used to treat surfaces to prevent corrosion or repair corroded or damaged components. Laser surface modification of alloys for corrosion and erosion resistance reviews the wealth of recent research on these important techniques and their applications. After an introductory overview, part one reviews the use of laser surface melting and other techniques to improve the corrosion resistance of stainless and other steels as well as nickel-titanium and a range of other alloys. Part two covers the use of laser surface modification to prevent different types of erosion, including liquid impingement, slurry (solid particle) and electrical erosion as well as laser remanufacturing of damaged components. With its distinguished editor and international team of contributors, Laser surface modification of alloys for corrosion and erosion resistance is a standard reference for all those concerned with preventing corrosion and erosion damage in metallic components in sectors as diverse as energy production and electrical engineering. Reviews recent research on the use of laser surface modification techniques, including the prevention of corrosion and repair of corroded or damaged components Discusses the techniques for improving the corrosion resistance of steels, nickel-titanium and a range of alloys Analyses the use of laser surface modification to prevent different types of erosion, including liquid impingement and laser remanufacturing of damaged components
Download or read book Microstructure Characterizing and Mechanical Properties of Selective Laser Melted Ti 6AL 4V Alloys written by Dang Khoa Do and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 1572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
