Download or read book Handbook of Sample Preparation for Scanning Electron Microscopy and X Ray Microanalysis written by Patrick Echlin and published by Springer Science & Business Media. This book was released on 2011-04-14 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning electr on microscopy (SEM) and x-ray microanalysis can produce magnified images and in situ chemical information from virtually any type of specimen. The two instruments generally operate in a high vacuum and a very dry environment in order to produce the high energy beam of electrons needed for imaging and analysis. With a few notable exceptions, most specimens destined for study in the SEM are poor conductors and composed of beam sensitive light elements containing variable amounts of water. In the SEM, the imaging system depends on the specimen being sufficiently electrically conductive to ensure that the bulk of the incoming electrons go to ground. The formation of the image depends on collecting the different signals that are scattered as a consequence of the high energy beam interacting with the sample. Backscattered electrons and secondary electrons are generated within the primary beam-sample interactive volume and are the two principal signals used to form images. The backscattered electron coefficient ( ? ) increases with increasing atomic number of the specimen, whereas the secondary electron coefficient ( ? ) is relatively insensitive to atomic number. This fundamental diff- ence in the two signals can have an important effect on the way samples may need to be prepared. The analytical system depends on collecting the x-ray photons that are generated within the sample as a consequence of interaction with the same high energy beam of primary electrons used to produce images.
Download or read book Electron Microprobe Analysis and Scanning Electron Microscopy in Geology written by S. J. B. Reed and published by Cambridge University Press. This book was released on 2005-08-25 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 2005, this book covers the closely related techniques of electron microprobe analysis (EMPA) and scanning electron microscopy (SEM) specifically from a geological viewpoint. Topics discussed include: principles of electron-target interactions, electron beam instrumentation, X-ray spectrometry, general principles of SEM image formation, production of X-ray 'maps' showing elemental distributions, procedures for qualitative and quantitative X-ray analysis (both energy-dispersive and wavelength-dispersive), the use of both 'true' electron microprobes and SEMs fitted with X-ray spectrometers, and practical matters such as sample preparation and treatment of results. Throughout, there is an emphasis on geological aspects not mentioned in similar books aimed at a more general readership. The book avoids unnecessary technical detail in order to be easily accessible, and forms a comprehensive text on EMPA and SEM for geological postgraduate and postdoctoral researchers, as well as those working in industrial laboratories.
Download or read book Nanoscience Volume 1 written by Paul O'Brien and published by Royal Society of Chemistry. This book was released on 2012 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of nanoscience continues to grow at an impressive rate, with over 10,000 new articles a year contributing to a literature of more than half a million citations. Such a vast landscape of material requires careful searching to discover the most important discoveries. The newest edition to the Specialist Periodical Reports, presents a digest of the last twelve months of literature across the field. The volume editor, Professor Paul O'Brien (University of Manchester, UK) has drawn on some of the most active researchers to present critical and comprehensive reviews of the hottest topics in the field. Chapters include "Nanomaterials for solar energy", "Magnetic hyperthermia" and "Graphene and graphene-based nanocomposites". There is also a special chapter on "Nanoscience in India". Anyone practicing in any nano-allied field, or wishing to enter the nano-world will benefit from the comprehensive resource, which will be published annually.
Download or read book Microscopy and Microanalysis for Lithium Ion Batteries written by Cai Shen and published by CRC Press. This book was released on 2023-05-26 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past three decades have witnessed the great success of lithium-ion batteries, especially in the areas of 3C products, electrical vehicles, and smart grid applications. However, further optimization of the energy/power density, coulombic efficiency, cycle life, charge speed, and environmental adaptability are still needed. To address these issues, a thorough understanding of the reaction inside a battery or dynamic evolution of each component is required. Microscopy and Microanalysis for Lithium-Ion Batteries discusses advanced analytical techniques that offer the capability of resolving the structure and chemistry at an atomic resolution to further drive lithium-ion battery research and development. • Provides comprehensive techniques that probe the fundamentals of Li-ion batteries. • Covers the basic principles of the techniques involved as well as its application in battery research. • Describes details of experimental setups and procedure for successful experiments. This reference is aimed at researchers, engineers, and scientists studying lithium-ion batteries including chemical, materials, and electrical engineers, as well as chemists and physicists.
Download or read book Aerosol Measurement written by Pramod Kulkarni and published by John Wiley & Sons. This book was released on 2011-07-12 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerosol Measurement: Principles, Techniques, and Applications Third Edition is the most detailed treatment available of the latest aerosol measurement methods. Drawing on the know-how of numerous expert contributors; it provides a solid grasp of measurement fundamentals and practices a wide variety of aerosol applications. This new edition is updated to address new and developing applications of aerosol measurement, including applications in environmental health, atmospheric science, climate change, air pollution, public health, nanotechnology, particle and powder technology, pharmaceutical research and development, clean room technology (integrated circuit manufacture), and nuclear waste management.
Download or read book 4D Electron Microscopy written by Ahmed H. Zewail and published by World Scientific. This book was released on 2010 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural phase transitions, mechanical deformations, and the embryonic stages of melting and crystallization are examples of phenomena that can now be imaged in unprecedented structural detail with high spatial resolution, and ten orders of magnitude as fast as hitherto. No monograph in existence attempts to cover the revolutionary dimensions that EM in its various modes of operation nowadays makes possible. The authors of this book chart these developments, and also compare the merits of coherent electron waves with those of synchrotron radiation. They judge it prudent to recall some important basic procedural and theoretical aspects of imaging and diffraction so that the reader may better comprehend the significance of the new vistas and applications now afoot. This book is not a vade mecum - numerous other texts are available for the practitioner for that purpose.
Download or read book Transmission Electron Microscopy written by C. Barry Carter and published by Springer. This book was released on 2016-08-24 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a companion volume to Transmission Electron Microscopy: A Textbook for Materials Science by Williams and Carter. The aim is to extend the discussion of certain topics that are either rapidly changing at this time or that would benefit from more detailed discussion than space allowed in the primary text. World-renowned researchers have contributed chapters in their area of expertise, and the editors have carefully prepared these chapters to provide a uniform tone and treatment for this exciting material. The book features an unparalleled collection of color figures showcasing the quality and variety of chemical data that can be obtained from today’s instruments, as well as key pitfalls to avoid. As with the previous TEM text, each chapter contains two sets of questions, one for self assessment and a second more suitable for homework assignments. Throughout the book, the style follows that of Williams & Carter even when the subject matter becomes challenging—the aim is always to make the topic understandable by first-year graduate students and others who are working in the field of Materials Science Topics covered include sources, in-situ experiments, electron diffraction, Digital Micrograph, waves and holography, focal-series reconstruction and direct methods, STEM and tomography, energy-filtered TEM (EFTEM) imaging, and spectrum imaging. The range and depth of material makes this companion volume essential reading for the budding microscopist and a key reference for practicing researchers using these and related techniques.
Download or read book Field Emission Scanning Electron Microscopy written by Nicolas Brodusch and published by Springer. This book was released on 2017-09-25 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights what is now achievable in terms of materials characterization with the new generation of cold-field emission scanning electron microscopes applied to real materials at high spatial resolution. It discusses advanced scanning electron microscopes/scanning- transmission electron microscopes (SEM/STEM), simulation and post-processing techniques at high spatial resolution in the fields of nanomaterials, metallurgy, geology, and more. These microscopes now offer improved performance at very low landing voltage and high -beam probe current stability, combined with a routine transmission mode capability that can compete with the (scanning-) transmission electron microscopes (STEM/-TEM) historically run at higher beam accelerating voltage
Download or read book Advances in Imaging and Electron Physics written by and published by Academic Press. This book was released on 2015-06-09 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Imaging and Electron Physics merges two long-running serials—Advances in Electronics and Electron Physics and Advances in Optical and Electron Microscopy. The series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains. - Contributions from leading authorities - Informs and updates on all the latest developments in the field
Download or read book Advances in Imaging and Electron Physics written by Peter W. Hawkes and published by Academic Press. This book was released on 2011-08-08 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Imaging and Electron Physics merges two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical and Electron Microscopy. This series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains. Contributions from leading international scholars and industry experts Discusses hot topic areas and presents current and future research trends Invaluable reference and guide for physicists, engineers and mathematicians
Download or read book Transmission Electron Microscopy written by David B. Williams and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electron microscopy has revolutionized our understanding the extraordinary intellectual demands required of the mi of materials by completing the processing-structure-prop croscopist in order to do the job properly: crystallography, erties links down to atomistic levels. It now is even possible diffraction, image contrast, inelastic scattering events, and to tailor the microstructure (and meso structure ) of materials spectroscopy. Remember, these used to be fields in them to achieve specific sets of properties; the extraordinary abili selves. Today, one has to understand the fundamentals ties of modem transmission electron microscopy-TEM of all of these areas before one can hope to tackle signifi instruments to provide almost all of the structural, phase, cant problems in materials science. TEM is a technique of and crystallographic data allow us to accomplish this feat. characterizing materials down to the atomic limits. It must Therefore, it is obvious that any curriculum in modem mate be used with care and attention, in many cases involving rials education must include suitable courses in electron mi teams of experts from different venues. The fundamentals croscopy. It is also essential that suitable texts be available are, of course, based in physics, so aspiring materials sci for the preparation of the students and researchers who must entists would be well advised to have prior exposure to, for carry out electron microscopy properly and quantitatively.
Download or read book Scanning Transmission Electron Microscopy written by Stephen J. Pennycook and published by Springer Science & Business Media. This book was released on 2011-03-24 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning transmission electron microscopy has become a mainstream technique for imaging and analysis at atomic resolution and sensitivity, and the authors of this book are widely credited with bringing the field to its present popularity. Scanning Transmission Electron Microscopy(STEM): Imaging and Analysis will provide a comprehensive explanation of the theory and practice of STEM from introductory to advanced levels, covering the instrument, image formation and scattering theory, and definition and measurement of resolution for both imaging and analysis. The authors will present examples of the use of combined imaging and spectroscopy for solving materials problems in a variety of fields, including condensed matter physics, materials science, catalysis, biology, and nanoscience. Therefore this will be a comprehensive reference for those working in applied fields wishing to use the technique, for graduate students learning microscopy for the first time, and for specialists in other fields of microscopy.
Download or read book Electron Nano imaging written by Nobuo Tanaka and published by Springer Nature. This book was released on with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Material Characterization Techniques and Applications written by Euth Ortiz Ortega and published by Springer Nature. This book was released on 2022-02-12 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents commonly applied characterization techniques in material science, their brief history and origins, mechanism of operation, advantages and disadvantages, their biosensing applications, and troubleshooting for each technique, while addressing the challenges researchers face when working with these techniques. The book dedicates its focus to identifying physicochemical and electrochemical nature of materials including analyses of morphology, mass spectrometry, and topography, as well as the characterization of elemental, structural, thermal, wettability, electrochemical, and chromatography properties. Additionally, the main features and benefits of using coupled characterization techniques are discussed in this book.
Download or read book Microscopy and Analysis written by and published by . This book was released on 2005 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Picoscience written by Klaus D. Sattler and published by CRC Press. This book was released on 2013-09-26 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now ubiquitous in public discussions about cutting-edge science and technology, nanoscience has generated many advances and inventions, from the development of new quantum mechanical methods to far-reaching applications in electronics and medical diagnostics. Ushering in the next technological era, Fundamentals of Picoscience focuses on the instrumentation and experiments emerging at the picometer scale. One picometer is the length of a trillionth of a meter. Compared to a human cell of typically ten microns, this is roughly ten million times smaller. In this state-of-the-art book, international scientists and researchers at the forefront of the field present the materials and methods used at the picoscale. They address the key challenges in developing new instrumentation and techniques to visualize and measure structures at this sub-nanometer level. With numerous figures, the book will help you: Understand how picoscience is an extension of nanoscience Determine which experimental technique to use in your research Connect basic studies to the development of next-generation picoelectronic devices The book covers various approaches for detecting, characterizing, and imaging at the picoscale. It then presents picoscale methods ranging from scanning tunneling microscopy (STM) to spectroscopic approaches at sub-nanometer spatial and energy resolutions. It also covers novel picoscale structures and picometer positioning systems. The book concludes with picoscale device applications, including single molecule electronics and optical computers. Introductions in each chapter explain basic concepts, define technical terms, and give context to the main material.
Download or read book Super Resolution Imaging in Biomedicine written by Alberto Diaspro and published by CRC Press. This book was released on 2016-11-03 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book encompasses the full breadth of the super-resolution imaging field, representing modern techniques that exceed the traditional diffraction limit, thereby opening up new applications in biomedicine. It shows readers how to use the new tools to increase resolution in sub-nanometer-scale images of living cells and tissue, which leads to new information about molecules, pathways and dynamics. The book highlights the advantages and disadvantages of the techniques, and gives state-of-the-art examples of applications using microscopes currently available on the market. It covers key techniques such as stimulated emission depletion (STED), structured illumination microscopy (SSIM), photoactivated localization microscopy (PALM), and stochastic optical reconstruction microscopy (STORM). It will be a useful reference for biomedical researchers who want to work with super-resolution imaging, learn the proper technique for their application, and simultaneously obtain a solid footing in other techniques.
