Download or read book Microscale Surface Tension and Its Applications written by Pierre Lambert and published by MDPI. This book was released on 2019-10-21 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on advances in miniaturization and soft matter, surface tension effects are a major key to the development of soft/fluidic microrobotics. Benefiting from scaling laws, surface tension and capillary effects can enable sensing, actuation, adhesion, confinement, compliance, and other structural and functional properties necessary in micro- and nanosystems. Various applications are under development: microfluidic and lab-on-chip devices, soft gripping and manipulation of particles, colloidal and interfacial assemblies, fluidic/droplet mechatronics. The capillary action is ubiquitous in drops, bubbles and menisci, opening a broad spectrum of technological solutions and scientific investigations. Identified grand challenges to the establishment of fluidic microrobotics include mastering the dynamics of capillary effects, controlling the hysteresis arising from wetting and evaporation, improving the dispensing and handling of tiny droplets, and developing a mechatronic approach for the control and programming of surface tension effects. In this Special Issue of Micromachines, we invite contributions covering all aspects of microscale engineering relying on surface tension. Particularly, we welcome contributions on fundamentals or applications related to: Drop-botics: fluidic or surface tension-based micro/nanorobotics: capillary manipulation, gripping, and actuation, sensing, folding, propulsion and bio-inspired solutions; Control of surface tension effects: surface tension gradients, active surfactants, thermocapillarity, electrowetting, elastocapillarity; Handling of droplets, bubbles and liquid bridges: dispensing, confinement, displacement, stretching, rupture, evaporation; Capillary forces: modelling, measurement, simulation; Interfacial engineering: smart liquids, surface treatments; Interfacial fluidic and capillary assembly of colloids and devices; Biological applications of surface tension, including lab-on-chip and organ-on-chip systems.

Download or read book Microscale Surface Tension and Its Applications written by Massimo Mastrangeli and published by . This book was released on 2019 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on advances in miniaturization and soft matter, surface tension effects are a major key to the development of soft/fluidic microrobotics. Benefiting from scaling laws, surface tension and capillary effects can enable sensing, actuation, adhesion, confinement, compliance, and other structural and functional properties necessary in micro- and nanosystems. Various applications are under development: microfluidic and lab-on-chip devices, soft gripping and manipulation of particles, colloidal and interfacial assemblies, fluidic/droplet mechatronics. The capillary action is ubiquitous in drops, bubbles and menisci, opening a broad spectrum of technological solutions and scientific investigations. Identified grand challenges to the establishment of fluidic microrobotics include mastering the dynamics of capillary effects, controlling the hysteresis arising from wetting and evaporation, improving the dispensing and handling of tiny droplets, and developing a mechatronic approach for the control and programming of surface tension effects. In this Special Issue of Micromachines, we invite contributions covering all aspects of microscale engineering relying on surface tension. Particularly, we welcome contributions on fundamentals or applications related to: Drop-botics: fluidic or surface tension-based micro/nanorobotics: capillary manipulation, gripping, and actuation, sensing, folding, propulsion and bio-inspired solutions; Control of surface tension effects: surface tension gradients, active surfactants, thermocapillarity, electrowetting, elastocapillarity; Handling of droplets, bubbles and liquid bridges: dispensing, confinement, displacement, stretching, rupture, evaporation; Capillary forces: modelling, measurement, simulation; Interfacial engineering: smart liquids, surface treatments; Interfacial fluidic and capillary assembly of colloids and devices; Biological applications of surface tension, including lab-on-chip and organ-on-chip systems. We expect novel as well as review contributions on all aspects of surface tension-based micro/nanoengineering. In line with Micromachines' policy, we also invite research proposals that introduce ideas for new applications, devices, or technologies.

Download or read book Microscale Heat Transfer Fundamentals and Applications written by S. Kakaç and published by Springer Science & Business Media. This book was released on 2006-05-20 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains an archival record of the NATO Advanced Institute on Microscale Heat Transfer – Fundamental and Applications in Biological and Microelectromechanical Systems held in Çesme – Izmir, Turkey, July 18–30, 2004. The ASIs are intended to be high-level teaching activity in scientific and technical areas of current concern. In this volume, the reader may find interesting chapters and various Microscale Heat Transfer Fundamental and Applications. The growing use of electronics, in both military and civilian applications has led to the widespread recognition for need of thermal packaging and management. The use of higher densities and frequencies in microelectronic circuits for computers are increasing day by day. They require effective cooling due to heat generated that is to be dissipated from a relatively low surface area. Hence, the development of efficient cooling techniques for integrated circuit chips is one of the important contemporary applications of Microscale Heat Transfer which has received much attention for cooling of high power electronics and applications in biomechanical and aerospace industries. Microelectromechanical systems are subject of increasing active research in a widening field of discipline. These topics and others are the main themeof this Institute.

Download or read book Moving Particle Semi implicit Method written by Seiichi Koshizuka and published by Academic Press. This book was released on 2018-06-01 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Moving Particle Semi-implicit Method: A Meshfree Particle Method for Fluid Dynamics begins by familiarizing the reader with basic theory that supports their journey through sections on advanced MPH methods. The unique insights that this method provides include fluid-structure interaction, non-Newtonian flow, and cavitation, making it relevant to a wide range of applications in the mechanical, structural, and nuclear industries, and in bioengineering. Co-authored by the originator of the MPS method, this book is the most authoritative guide available. It will be of great value to students, academics and researchers in industry. Presents the differences between MPH and SPH, helping readers choose between methods for different purposes Provides pieces of computer code that readers can use in their own simulations Includes the full, extended algorithms Explores the use of MPS in a range of industries and applications, including practical advice

Download or read book Microscale and Nanoscale Heat Transfer written by C.B. Sobhan and published by CRC Press. This book was released on 2008-06-12 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through analyses, experimental results, and worked-out numerical examples, Microscale and Nanoscale Heat Transfer: Fundamentals and Engineering Applications explores the methods and observations of thermophysical phenomena in size-affected domains. Compiling the most relevant findings from the literature, along with results from their own re

Download or read book Selected Topics in Micro Nano robotics for Biomedical Applications written by Yi Guo and published by Springer Science & Business Media. This book was released on 2012-09-26 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro/Nano-robotics for Biomedical Applications features a system approach and incorporates modern methodologies in autonomous mobile robots for programmable and controllable micro/nano-robots aiming at biomedical applications. The book provides chapters of instructional materials in micro/nanorobotics for biomedical applications. The book features lecture units on micro/nanorobot components and techniques, including sensors, actuator, power supply, and micro/nano-fabrication and assembly. It also contains case studies on using micro/nano-robots in biomedical environments and in biomedicine, as well as a design example to conceptually develop a Vitamin-pill sized robot to enter human’s gastrointestinal tract. Laboratory modules to teach robot navigation and cooperation methods suitable to biomedical applications will be also provided based on existing simulation and robot platforms.

Download or read book Microfluidics and Microscale Transport Processes written by Suman Chakraborty and published by CRC Press. This book was released on 2012-10-04 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advancements in micro- and nano-fabrication techniques, especially in the last couple of decades, have led research communities, over the world, to invest unprecedented levels of attention on the science and technology of micro- and nano-scale devices and the concerned applications. With an intense focus on micro- and nanotechnology from a flui

Download or read book The Near Surface Layer of the Ocean written by Alexander Soloviev and published by Springer Science & Business Media. This book was released on 2006-03-13 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until the 1980s, a tacit agreement among many physical oceanographers was that nothing deserving attention could be found in the upper few meters of the ocean. The lack of adequete knowledge about the near-surface layer of the ocean was mainly due to the fact that the widely used oceanographic instruments (such as bathythermographs, CTDs, current meters, etc.) were practically useless in the upper few meters of the ocean. Interest in the ne- surface layer of the ocean rapidly increased along with the development of remote sensing techniques. The interpretation of ocean surface signals sensed from satellites demanded thorough knowledge of upper ocean processes and their connection to the ocean interior. Despite its accessibility to the investigator, the near-surface layer of the ocean is not a simple subject of experimental study. Random, sometimes huge, vertical motions of the ocean surface due to surface waves are a serious complication for collecting quality data close to the ocean surface. The supposedly minor problem of avoiding disturbances from ships’ wakes has frustrated several generations of oceanographers attempting to take reliable data from the upper few meters of the ocean. Important practical applications nevertheless demanded action, and as a result several pioneering works in the 1970s and 1980s laid the foundation for the new subject of oceanography – the near-surface layer of the ocean.

Download or read book Micro Electro Mechanical System Design written by James J. Allen and published by CRC Press. This book was released on 2005-07-08 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is challenging at best to find a resource that provides the breadth of information necessary to develop a successful micro electro mechanical system (MEMS) design. Micro Electro Mechanical System Design is that resource. It is a comprehensive, single-source guide that explains the design process by illustrating the full range of issues involved,

Download or read book Micro Nano Chip Electrokinetics Volume III written by Xiangchun Xuan and published by MDPI. This book was released on 2021-02-24 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro/nanofluidics-based lab-on-a-chip devices have found extensive applications in the analysis of chemical and biological samples over the past two decades. Electrokinetics is the method of choice in these micro/nano-chips for transporting, manipulating, and sensing various analyte species (e.g., ions, molecules, fluids, and particles). This book aims to highlight the recent developments in the field of micro/nano-chip electrokinetics, ranging from the fundamentals of electrokinetics to the applications of electrokinetics to both chemo- and bio-sample handling.

Download or read book Impedance Spectroscopy and its Application in Biological Detection written by Geeta Bhatt and published by CRC Press. This book was released on 2023-12-07 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes basics of impedance spectroscopy technology, substrate compatibility issues, integration capabilities, and several applications in the detection of different analytes. It helps explore the importance of this technique in biological detection, related micro/nanofabricated platforms and respective integration, biological synthesis schemes to carry out the detection, associated challenges, and related future directions. The various qualitative/quantitative findings of several modules are summarized in the form of the detailed descriptions, schematics, and tables. Features: Serves as a single source for exploring underlying fundamental principles and the various biological applications through impedance spectroscopy. Includes chapters based on nonbiological applications of impedance spectroscopy and IoT-enabled impedance spectroscopy-based methods for detection. Discusses derivations, substrates, applications, and several integrations. Describes micro/nanofabrication of impedance-based biological sensors. Reviews updated integrations like digital manufacturing and IoT. This book is aimed at researchers and graduate students in material science, impedance spectroscopy, and biosensing.

Download or read book Springer Handbook of Nanotechnology written by Bharat Bhushan and published by Springer. This book was released on 2017-11-05 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook has become the definitive reference work in the field of nanoscience and nanotechnology, and this 4th edition incorporates a number of recent new developments. It integrates nanofabrication, nanomaterials, nanodevices, nanomechanics, nanotribology, materials science, and reliability engineering knowledge in just one volume. Furthermore, it discusses various nanostructures; micro/nanofabrication; micro/nanodevices and biomicro/nanodevices, as well as scanning probe microscopy; nanotribology and nanomechanics; molecularly thick films; industrial applications and nanodevice reliability; societal, environmental, health and safety issues; and nanotechnology education. In this new edition, written by an international team of over 140 distinguished experts and put together by an experienced editor with a comprehensive understanding of the field, almost all the chapters are either new or substantially revised and expanded, with new topics of interest added. It is an essential resource for anyone working in the rapidly evolving field of key technology, including mechanical and electrical engineers, materials scientists, physicists, and chemists.

Download or read book Advances in Biomedical Engineering Research and Application 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-06-21 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Biomedical Engineering Research and Application: 2013 Edition is a ScholarlyBrief™ that delivers timely, authoritative, comprehensive, and specialized information about ZZZAdditional Research in a concise format. The editors have built Advances in Biomedical Engineering Research and Application: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about ZZZAdditional Research in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Advances in Biomedical Engineering Research and Application: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Micromixers written by Nam-Trung Nguyen and published by William Andrew. This book was released on 2011-09-17 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability to mix minute quantities of fluids is critical in a range of recent and emerging techniques in engineering, chemistry and life sciences, with applications as diverse as inkjet printing, pharmaceutical manufacturing, specialty and hazardous chemical manufacturing, DNA analysis and disease diagnosis. The multidisciplinary nature of this field – intersecting engineering, physics, chemistry, biology, microtechnology and biotechnology – means that the community of engineers and scientists now engaged in developing microfluidic devices has entered the field from a variety of different backgrounds. Micromixers is uniquely comprehensive, in that it deals not only with the problems that are directly related to fluidics as a discipline (aspects such as mass transport, molecular diffusion, electrokinetic phenomena, flow instabilities, etc.) but also with the practical issues of fabricating micomixers and building them into microsystems and lab-on-chip assemblies.With practical applications to the design of systems vital in modern communications, medicine and industry this book has already established itself as a key reference in an emerging and important field. The 2e includes coverage of a broader range of fabrication techniques, additional examples of fully realized devices for each type of micromixer and a substantially extended section on industrial applications, including recent and emerging applications. Introduces the design and applications of micromixers for a broad audience across chemical engineering, electronics and the life sciences, and applications as diverse as lab-on-a-chip, ink jet printing, pharmaceutical manufacturing and DNA analysis Helps engineers and scientists to unlock the potential of micromixers by explaining both the scientific (microfluidics) aspects and the engineering involved in building and using successful microscale systems and devices with micromixers The author's applied approach combines experience-based discussion of the challenges and pitfalls of using micromixers, with proposals for how to overcome them

Download or read book Micromanufacturing Engineering and Technology written by Yi Qin and published by William Andrew. This book was released on 2015-05-08 with total page 859 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing Engineering and Technology, Second Edition, covers the major topics of micro-manufacturing. The book not only covers theory and manufacturing processes, but it uniquely focuses on a broader range of practical aspects of micro-manufacturing engineering and utilization by also covering materials, tools and equipment, manufacturing system issues, control aspects and case studies. By explaining material selection, design considerations and economic aspects, the book empowers engineers in choosing among competing technologies. With a focus on low-cost and high-volume micro-manufacturing processes, the updated title covers technologies such as micro-mechanical-cutting, laser-machining, micro-forming, micro-EDM, micro-ECM, hot-embossing, micro-injection molding, laser micro-sintering, thin film fabrication, inkjet technology, micro-joining, multiple processes machines, and more. Edited by one of the few world-experts in this relatively new, but rapidly-expanding area and presenting chapters written by a 40-strong team of leading industry specialists, this book is an invaluable source of information for engineers, R&D researchers and academics. Covers key micro-manufacturing technologies, processes and equipment with high-volume production capabilities, enabling large companies as well as SMEs to introduce those technologies in production and business and reduce production costs Outlines micro-manufacturing system engineering and practical issues pertaining to material, design, handling, metrology, inspection, testing, sensors, control, system integration and software, and micro-factories Enables manufacturing practitioners to choose the right technology suitable for a particular product-manufacture

Download or read book Carbon for Micro and Nano Devices written by Swati Sharma and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-03-18 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro and nano devices are an integral part of modern technology. To address the requirements of the state-of-the-art technology, topics are selected from both chip-based and flexible electronics. A wide range of carbon materials including graphene, carbon nanotube, glass-like carbon, porous carbon, carbon black, graphite, carbon nanofiber, laser-patterned carbon and heteroatom containing carbon are covered. This goal is to elucidate fundamental carbon material science along with compatible micro- and nanofabrication techniques. Real-life example of sensors, energy storage and generation devices, MEMS, NEMS and implantable bioelectronics enable visualization of the outcome of described processes. Students will also benefit from the attractive aspects of carbon science explained in simple terms. Hybridization, allotrope classification and microstructural models are presented with a whole new outlook. Discussions on less-studied, hypothetical and undiscovered carbon forms render the contents futuristic and highly appealing.

Download or read book Microscale and Nanoscale Heat Transfer written by Mourad Rebay and published by CRC Press. This book was released on 2016-01-06 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microscale and Nanoscale Heat Transfer: Analysis, Design, and Applications features contributions from prominent researchers in the field of micro- and nanoscale heat transfer and associated technologies and offers a complete understanding of thermal transport in nano-materials and devices. Nanofluids can be used as working fluids in thermal system