Download or read book Microrobotics for Micromanipulation written by Nicolas Chaillet and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microrobotics is an emerging and booming area with many and various applications, including in fields such as industrial/manufacturing robotics, medical robotics, and laboratory instrumentation. Microrobotics for Micromanipulation presents for the first time, in detail, a treatment of the field of robotics dedicated to handling objects of micrometer dimensions. At these dimensions, the behavior of objects is significantly different from the better known, larger scales, which leads to implementation techniques that can be radically different from the more commonly used solutions. This book details the behaviors of objects at the micrometer scale and provides robotics solutions that are suitable, in terms of actuators, grippers, manipulators, environmental perception, and microtechnology. Worked examples are included in the book - enabling engineers, students and researchers to familiarize themselves with this emerging area and to contribute to its development.
Download or read book Microrobotics and Micromanipulation written by Bradley J. Nelson and published by SPIE-International Society for Optical Engineering. This book was released on 1998 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cooperative Control of Multiple Untethered Magnetic Microrobots for Precision Micromanipulation written by Nahum Arenas Torres and published by . This book was released on 2019 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of untethered microrobotics has emerged within the last two decades for its applications potential in military surveillance, micro and nano manufacturing, as well as in health care for minimal invasive surgery and drug delivery. Microrobots need to be fast and precise in order to be useful as a tool for manufacturing applications. It is well understood that at this size scale numerous challenges prevail such as stiction between microrobot and environment, providing power, locomotion control, and intelligence to microrobots and motion measurement. In order to accelerate the research in this field, I participated in the Mobile Microrobotics Challenge (MMC). MMC is an annual event organized by the Institute of Electrical and Electronics Engineers Robotics and Automation Society (IEEE RAS) since 2013 and designed to encourage researchers around the world to solve pressing challenges in microrobotics. The challenge is composed of three events: 1) the autonomous mobility and accuracy challenge, 2) the microassembly challenge and 3) the MMC showcase and poster session. These challenges simulate common tasks that are found in medical applications, involving high speed closed-loop positioning, and in microassembly applications involving precision motion control and the later and the showcase and poster challenge tests your communication skills. This thesis investigates and provides methods to mitigate the problems of stiction, locomotion control, and motion measurement for microrobots. In addition, we discuss novel methods for providing cooperative behavior to multiple microrobots and to estimate and mitigate spatial uncertainty estimation for modular serial link robotic platforms. In this dissertation I describe novel methods to enhance the performance of magnetic microrobots, reduce environmental forces via inexpensive anti-friction coatings, and increase their velocities via novel mechanical amplifiers. Such methods generate swarming motions, with a leader and formation following behavior, and cooperative planar motions compatible with micromanipulation tasks such as grasping. Moreover, I provide a possible application scenario using such cooperative behavior to assemble optical elements.The cooperative grasping behavior is produced by the magnetic field gradient controlled by a modular multi-degree of freedom serial link robot used to position the conical permanent magnet with respect to the robots' workspace. In the course of this research it was necessary to precisely characterize and compensate for the spatial uncertainty of the robot. Spatial uncertainty is an inherent feature of multiple-link robots due to misalignment of joints, link length, resolution of the actuator, the type of joint, the path of motion and the atmosphere of operation. Such uncertainties can be detrimental for robots used in assembly tasks where precision is essential. In order to overcome this fundamental challenge with flexible or modular assembly and packaging systems, I presents a novel precision evaluation and control technique to estimate and track the end-effector position errors in a robotic manipulation system resulting from the kinematic configuration as well as the dynamic parameters for each specific task; thereby, allowing the automation application to compensate for these errors in run-time.
Download or read book Vision based Force Measurement for Micromanipulation and Microrobotics written by Michael Allen Greminger and published by . This book was released on 2002 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automated Nanohandling by Microrobots written by Sergej Fatikow and published by Springer Science & Business Media. This book was released on 2008 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to robot-based nanohandling. It presents work on the development of a versatile microrobot-based nanohandling robot station inside a scanning electron microscope (SEM). Those unfamiliar with the subject will find the text, which is complemented throughout by the extensive use of illustrations, clear and simple to understand. The author has published two books and numerous papers in the field, and holds more than 50 patents.
Download or read book Robotic Microassembly written by Michael Gauthier and published by John Wiley & Sons. This book was released on 2011-01-14 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the latest models and methods for robotic microassembly from around the world This book presents and analyzes new and emerging models and methods developed around the world for robotic microassembly, a new and innovative way to produce better microsystems. By exploring everything from the physics of micromanipulation to microassembly to microhandling, it provides the first complete overview and review of this rapidly growing field. Robotic Microassembly is divided into three parts: Part One: Modeling of the Microworld Part Two: Handling Strategies Part Three: Robotic and Microassembly Together, these three parts feature eight chapters contributed by eight different authors. The authors, internationally recognized experts in the field of robotic microassembly, represent research laboratories in Asia, Europe, and North America. As a result, readers get a remarkable perspective on different approaches to robotic microassembly from around the world. Examples provided throughout the chapters help readers better understand how these different approaches work in practice. References at the end of each chapter lead to the primary literature for further investigation of individual topics. Robotic microassembly offers a new, improved way to manufacture high-performance microelectro-mechanical systems (MEMS). Therefore, any professional or student involved in microrobotics, micromechatronics, self-assembly or MEMS will find plenty of novel ideas and methods in this book that set the stage for new approaches to design and build the next generation of MEMS and microproducts.
Download or read book Microrobotics and Microassembly written by and published by . This book was released on 2001 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Mechatronics and MEMS Devices II written by Dan Zhang and published by Springer. This book was released on 2016-10-18 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the state-of-the-art technologies in mechatronics, robotics, and MEMS devices in order to improve their methodologies. It provides a follow-up to "Advanced Mechatronics and MEMS Devices" (2013) with an exploration of the most up-to-date technologies and their applications, shown through examples that give readers insights and lessons learned from actual projects. Researchers on mechatronics, robotics, and MEMS as well as graduate students in mechanical engineering will find chapters on: Fundamental design and working principles on MEMS accelerometers Innovative mobile technologies Force/tactile sensors development Control schemes for reconfigurable robotic systems Inertial microfluidics Piezoelectric force sensors and dynamic calibration techniques ...And more. Authors explore applications in the areas of agriculture, biomedicine, advanced manufacturing, and space. Micro-assembly for current and future industries is also considered, as well as the design and development of micro and intelligent manufacturing.
Download or read book Micromachines for Biological Micromanipulation written by Qingsong Xu and published by Springer. This book was released on 2018-02-01 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the noteworthy developments in the field of micromachining, with a specific focus on microinjection systems used for biological micromanipulation. The author also explores the design, development, and fabrication of new mechanical designs for micromachines, with plenty of examples that elucidate their modeling and control. The design and fabrication of a piezoelectric microinjector, constant force microinjector, constant force microgripper, PDVF microforce sensor, and a piezoelectric microsyringe are presented as examples of new technology for microinjection systems. This book is appropriate for both researchers and advanced students in bioengineering.
Download or read book Microsystem Technology and Microrobotics written by Sergej Fatikow and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microsystem technology (MST) integrates very small (up to a few nanometers) mechanical, electronic, optical, and other components on a substrate to construct functional devices. These devices are used as intelligent sensors, actuators, and controllers for medical, automotive, household and many other purposes. This book is a basic introduction to MST for students, engineers, and scientists. It is the first of its kind to cover MST in its entirety. It gives a comprehensive treatment of all important parts of MST such as microfabrication technologies, microactuators, microsensors, development and testing of microsystems, and information processing in microsystems. It surveys products built to date and experimental products and gives a comprehensive view of all developments leading to MST devices and robots.
Download or read book Untethered Magnetic and Acoustic Micromanipulation for Microrobotic Assembly in Dry Workspace written by Omid Youssefi and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Untethered robotic micromanipulators are devices that physically interact with components on the microscale (sizes less than a few millimeters), and usually within a remote workspace, that enhance the precision and accuracy of manipulation by an unaided hand. Addressing the low levels of dexterity, precise kinematics and dynamics, and versatility are the current limitations that have been the focus of recent studies. The two novel methods presented in this thesis use magnetic and acoustic fields to achieve dexterous and precise micromanipulation characteristics to tackle the current gaps. A magneto-acoustic system is developed for magnetic actuation, with sub-body-length precision, of magnetic microrobots for dry surface and levitated contactless micromanipulations and the performances of each method are characterized. The capabilities of both methods are shown by real-world microassembly demonstration for assembly of microscale-sized optical components. For the first time, a permanent magnet sphere was levitated open-loop with small magnetic and acoustic field magnitudes.
Download or read book Mobile Microrobotics written by Metin Sitti and published by MIT Press. This book was released on 2017-06-16 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first textbook on micron-scale mobile robotics, introducing the fundamentals of design, analysis, fabrication, and control, and drawing on case studies of existing approaches. Progress in micro- and nano-scale science and technology has created a demand for new microsystems for high-impact applications in healthcare, biotechnology, manufacturing, and mobile sensor networks. The new robotics field of microrobotics has emerged to extend our interactions and explorations to sub-millimeter scales. This is the first textbook on micron-scale mobile robotics, introducing the fundamentals of design, analysis, fabrication, and control, and drawing on case studies of existing approaches. The book covers the scaling laws that can be used to determine the dominant forces and effects at the micron scale; models forces acting on microrobots, including surface forces, friction, and viscous drag; and describes such possible microfabrication techniques as photo-lithography, bulk micromachining, and deep reactive ion etching. It presents on-board and remote sensing methods, noting that remote sensors are currently more feasible; studies possible on-board microactuators; discusses self-propulsion methods that use self-generated local gradients and fields or biological cells in liquid environments; and describes remote microrobot actuation methods for use in limited spaces such as inside the human body. It covers possible on-board powering methods, indispensable in future medical and other applications; locomotion methods for robots on surfaces, in liquids, in air, and on fluid-air interfaces; and the challenges of microrobot localization and control, in particular multi-robot control methods for magnetic microrobots. Finally, the book addresses current and future applications, including noninvasive medical diagnosis and treatment, environmental remediation, and scientific tools.
Download or read book Flexible Robotics written by Mathieu Grossard and published by John Wiley & Sons. This book was released on 2013-08-05 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to provide those interested in the field of flexible robotics with an overview of several scientific and technological advances in the practical field of robotic manipulation. The different chapters examine various stages that involve a number of robotic devices, particularly those designed for manipulation tasks characterized by mechanical flexibility. Chapter 1 deals with the general context surrounding the design of functionally integrated microgripping systems. Chapter 2 focuses on the dual notations of modal commandability and observability, which play a significant role in the control authority of vibratory modes that are significant for control issues. Chapter 3 presents different modeling tools that allow the simultaneous use of energy and system structuring notations. Chapter 4 discusses two sensorless methods that could be used for manipulation in confined or congested environments. Chapter 5 analyzes several appropriate approaches for responding to the specific needs required by versatile prehension tasks and dexterous manipulation. After a classification of compliant tactile sensors focusing on dexterous manipulation, Chapter 6 discusses the development of a complying triaxial force sensor based on piezoresistive technology. Chapter 7 deals with the constraints imposed by submicrometric precision in robotic manipulation. Chapter 8 presents the essential stages of the modeling, identification and analysis of control laws in the context of serial manipulator robots with flexible articulations. Chapter 9 provides an overview of models for deformable body manipulators. Finally, Chapter 10 presents a set of contributions that have been made with regard to the development of methodologies for identification and control of flexible manipulators based on experimental data. Contents 1. Design of Integrated Flexible Structures for Micromanipulation, Mathieu Grossard, Mehdi Boukallel, Stéphane Régnier and Nicolas Chaillet. 2. Flexible Structures’ Representation and Notable Properties in Control, Mathieu Grossard, Arnaud Hubert, Stéphane Régnier and Nicolas Chaillet. 3. Structured Energy Approach for the Modeling of Flexible Structures, Nandish R. Calchand, Arnaud Hubert, Yann Le Gorrec and Hector Ramirez Estay. 4. Open-Loop Control Approaches to Compliant Micromanipulators, Yassine Haddab, Vincent Chalvet and Micky Rakotondrabe. 5. Mechanical Flexibility and the Design of Versatile and Dexterous Grippers, Javier Martin Amezaga and Mathieu Grossard. 6. Flexible Tactile Sensors for Multidigital Dexterous In-hand Manipulation, Mehdi Boukallel, Hanna Yousef, Christelle Godin and Caroline Coutier. 7. Flexures for High-Precision Manipulation Robots, Reymond Clavel, Simon Henein and Murielle Richard. 8. Modeling and Motion Control of Serial Robots with Flexible Joints, Maria Makarov and Mathieu Grossard. 9. Dynamic Modeling of Deformable Manipulators, Frédéric Boyer and Ayman Belkhiri. 10. Robust Control of Robotic Manipulators with Structural Flexibilities, Houssem Halalchi, Loïc Cuvillon, Guillaume Mercère and Edouard Laroche. About the Authors Mathieu Grossard, CEA LIST, Gif-sur-Yvette, France. Nicolas Chaillet, FEMTO-ST, Besançon, France. Stéphane Régnier, ISIR, UPMC, Paris, France.
Download or read book Microrobotics and Microsystem Fabrication written by Armin Sulzmann and published by SPIE-International Society for Optical Engineering. This book was released on 1998 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microrobotics written by Society of Photo-optical Instrumentation Engineers and published by SPIE-International Society for Optical Engineering. This book was released on 1996 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micro Manufacturing Technologies and Their Applications written by Irene Fassi and published by Springer. This book was released on 2017-01-31 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth theoretical and practical information on recent advances in micro-manufacturing technologies and processes, covering such topics as micro-injection moulding, micro-cutting, micro-EDM, micro-assembly, micro-additive manufacturing, moulded interconnected devices, and microscale metrology. It is designed to provide complementary material for the related e-learning platform on micro-manufacturing developed within the framework of the Leonardo da Vinci project 2013-3748/542424: MIMAN-T: Micro-Manufacturing Training System for SMEs. The book is mainly addressed to technicians and prospective professionals in the sector and will serve as an easily usable tool to facilitate the translation of micro-manufacturing technologies into tangible industrial benefits. Numerous examples are included to assist readers in learning and implementing the described technologies. In addition, an individual chapter is devoted to technological foresight, addressing market analysis and business models for micro-manufacturers.
Download or read book Micro Nanorobotic Manipulation Systems and Their Applications written by Toshio Fukuda and published by Springer Science & Business Media. This book was released on 2013-02-28 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro/Nano Robotics and Automation technologies have rapidly grown associated with the growth of Micro and Nanotechnologies. This book presents a summary of fundamentals in micro-nano scale engineering and the current state of the art of these technologies. “Micro-Nanorobotic Manipulation Systems and their Applications” introduces these advanced technologies from the basics and applications aspects of Micro/Nano-Robotics and Automation from the prospective micro/nano-scale manipulation. The book is organized in 9 chapters including an overview chapter of Micro/Nanorobotics and Automation technology from the historical view and important related research works. Further chapters are devoted to the physics of micro-nano fields as well as to material and science, microscopes, fabrication technology, importance of biological cell, and control techniques. Furthermore important examples, applications and a concise summary of Micro-Nanorobotics and Automation technologies are given.
