Download or read book Microrheology and Microstructure of Poly vinyl Alcohol based Physical Gels written by Nan Yang and published by . This book was released on 2011 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: We study the microrheology and microstructure of physically cross-linked poly(vinyl alcohol) (PVA) gels using atomic force microscopy, dynamic light scattering and particle tracking. We compare the microscopic rheological properties with the bulk properties measured using conventional shear rheometry, and correlate the rheological properties to the structure of the materials. We develop a new technique for investigating the viscoelastic properties of soft materials using the atomic force microscope. The electronic feedback of an atomic force microscope is modi ed by adding a small oscillatory voltage to the de ection signal, and the amplitude and phase of the motion of the sample stage is monitored by a lock-in ampli er to determine the viscous and elastic moduli of the sample. We apply this method to PVA hydrogels and suspended PVA nano bers. We find the moduli of both the bers and the hydrogels to show a signi cant frequency dependence. We perform rheological and dynamic light scattering measurements on PVA/poly(ethylene glycol) (PEG) blends during aging. The properties of the blends change much faster with age than those of the pure PVA solution, and the blends undergo phase separation and gel over time. From dynamic light scattering experiments, we observe changes of the relaxation times in the blends as they age. We determine the gel point on the microscopic scale from the depression of the intensity autocorrelation function of the scattered light. We nd that gelation of the PVA/PEG blends is induced by the growth of aggregates in the blends. By comparing the gel point determined by light scattering to that from the rheometry, we nd that the macroscopic gel point is earlier than the microscopic one, indicating that the gel transition is length-scale dependent. Particle tracking microrheology is used to investigate the microrheology and microstructure of these PVA/PEG blends as a function of PEG concentration and aging time. Dynamic light scattering probes the ensemble averaged motion of all tracer particles in the scattering volume, while particle tracking tracks the motion of many individual tracers. The local viscoelastic moduli are determined from the measurements using the generalized Stokes- Einstein relation. We nd that addition of PEG to the PVA solutions in uences the micro environment signi cantly, and that phase separation happens before gelation as the blends age. We again nd that the microscopic gel point occurs later than the macroscopic one, con rming the above results. The experimental results are consistent with a model in which the PVA/PEG blends consist of PVA-poor pores within a continuous PVA-rich domain which gels.
Download or read book Dynamic Light Scattering written by Bruce J. Berne and published by Courier Corporation. This book was released on 2013-07-24 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers play an increasingly important role in a variety of detection techniques, making inelastic light scattering a tool of growing value in the investigation of dynamic and structural problems in chemistry, biology, and physics. Until the initial publication of this work, however, no monograph treated the principles behind current developments in the field.This volume presents a comprehensive introduction to the principles underlying laser light scattering, focusing on the time dependence of fluctuations in fluid systems; it also serves as an introduction to the theory of time correlation functions, with chapters on projection operator techniques in statistical mechanics. The first half comprises most of the material necessary for an elementary understanding of the applications to the study of macromolecules, or comparable sized particles in fluids, and to the motility of microorganisms. The study of collective (or many particle) effects constitutes the second half, including more sophisticated treatments of macromolecules in solution and most of the applications of light scattering to the study of fluids containing small molecules.With its wide-ranging discussions of the many applications of light scattering, this text will be of interest to research chemists, physicists, biologists, medical and fluid mechanics researchers, engineers, and graduate students in these areas.
Download or read book Polymeric Cryogels written by Oguz Okay and published by Springer. This book was released on 2014-06-02 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Brief History of Polymeric Cryogels Vladmir I. Lozinsky Basic Principles of Cryotropic Gelation Vladimir I. Lozinsky, Oguz Okay Synthesis, Structure-Property Relationships of Cryogels Oguz Okay, Vladimir I. Lozinsky Kinetic Analysis of Cryotropic Gelation of Poly(vinyl alcohol)/water Solutions by Small-Angle Neutron Scattering Claudio De Rosa, Finizia Auriemma, Rocco Di Girolamo Cryogels via UV Irradiation Technique Petar D. Petrov, Christo B. Tsvetanov Inorganic Cryogels Oleg A. Shlyakhtin Cryogels for Biotechnological Applications Bo Mattiasson Poly(vinyl alcohol) Cryogels for Biomedical Applications Wankei Wan, A. Dawn Bannerman, Lifang Yang, Helium Mak.
Download or read book Microscale Diagnostic Techniques written by Kenny Breuer and published by Springer Science & Business Media. This book was released on 2005-12-06 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microscale Diagnostic Techniques highlights the most innovative and powerful developments in microscale diagnostics. It provides a resource for scientists and researchers interested in learning about the techniques themselves, including their capabilities and limitations. The fields of Micro- and Nanotechnology have emerged over the past decade as a major focus of modern scientific and engineering research and technology. Driven by advances in microfabrication, the investigation, manipulation and engineering of systems characterized by micrometer and, more recently, nanometer scales have become commonplace throughout all technical disciplines. With these developments, an entirely new collection of experimental techniques has been developed to explore and characterize such systems.
Download or read book Polymer Colloids written by Rodney Priestley and published by Royal Society of Chemistry. This book was released on 2019-12-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Academic and industrial research around polymer-based colloids is huge, driven both by the development of mature technologies, e.g. latexes for coatings, as well as the advancement of new materials and applications, such as building blocks for 2D/3D structures and medicine. Edited by two world-renowned leaders in polymer science and engineering, this is a fundamental text for the field. Based on a specialised course by the editors, this book provides the reader with an invaluable single source of reference. The first section describes formation, explaining basic properties of emulsions and dispersion polymerization, microfluidic approaches to produce polymer-based colloids and formation via directed self-assembly. The next section details characterisation methodologies from microscopy and small angle scattering, to surface science and simulations. The final chapters close with applications, including Pickering emulsions and molecular engineering for materials development. A comprehensive guide to polymer colloids, with contributions by leaders in their respective areas, this book is a must-have for researchers and practitioners working across polymers, soft matter and chemical and molecular engineering.
Download or read book Introduction to Soft Matter written by Ian W. Hamley and published by John Wiley & Sons. This book was released on 2013-03-18 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to this exciting and relativelynew subject with chapters covering natural and synthetic polymers,colloids, surfactants and liquid crystals highlighting the many andvaried applications of these materials. Written by an expert in thefield, this book will be an essential reference for people workingin both industry and academia and will aid in understanding of thisincreasingly popular topic. Contains a new chapter on biological soft matter Newly edited and updated chapters including updated coverageof recent aspects of polymer science. Contain problems at the end of each chapter to facilitateunderstanding
Download or read book Additive Manufacturing written by Amit Bandyopadhyay and published by CRC Press. This book was released on 2015-09-08 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of additive manufacturing has seen explosive growth in recent years due largely in part to renewed interest from the manufacturing sector. Conceptually, additive manufacturing, or industrial 3D printing, is a way to build parts without using any part-specific tooling or dies from the computer-aided design (CAD) file of the part. Today, mo
Download or read book Frontiers in the Science and Technology of Polymer Recycling written by Güneri Akovali and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers, main components of plastics and rubbers, are being discarded in increasing quantities. But this waste can also be considered as `plastic gold'. Public concern, coupled with the inherent value of the material, means that recycling is imperative. The present book presents a survey of current knowledge in the form of case studies, including current legal and educational issues. Topics covered also include regulation and practice in NATO countries, the economics of recycling, the reprocessing of single polymers and mixtures, and future prospects and strategies. Audience: Vital reading for all polymer scientists, technicians and engineers.
Download or read book Carbohydrates in Food written by Ann-Charlotte Eliasson and published by CRC Press. This book was released on 1996-01-02 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work offers comprehensive coverage of the chemical analysis, structure, functional properties and nutritional relevance of monosaccharides, disaccharides and polysaccharides used in food. It presents current information on the significance of carbohydrates in diet, and furnishes both chemical and biochemical methods for carbohydrate analysis.
Download or read book The Delivery of Nanoparticles written by Abbass A. Hashim and published by BoD – Books on Demand. This book was released on 2012-05-16 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoparticle is a general challenge for today's technology and the near future observations of science. Nanoparticles cover mostly all types of sciences and manufacturing technologies. The properties of this particle are flying over today scientific barriers and have passed the limitations of conventional sciences. This is the reason why nanoparticles have been evaluated for the use in many fields. InTech publisher and the contributing authors of this book in nanoparticles are all overconfident to invite all scientists to read this new book. The book's potential was held until it was approached by the art of exploring the most advanced research in the field of nano-scale particles, preparation techniques and the way of reaching their destination. 25 reputable chapters were framed in this book and there were alienated into four altered sections; Toxic Nanoparticles, Drug Nanoparticles, Biological Activities and Nano-Technology.
Download or read book Biomaterials written by S.V. Bhat and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: As biomaterials are used in medical devices, meeting needs in such diverse surgical disciplines as ophthalmology, cardiology, neuromuscular surgery, orthopaedics, dentistry, etc., they must have intimate contact with patient's tissue or body fluids, providing a real physical interface which seriously restricts developments. This book is written for those who would like to advance their knowledge of biomaterials. The subject matter of the book is divided into twelve chapters dealing with the structure and relationship of biological and man-made biomaterials. The application of these materials for various medical devices, and recent developments in tissue engineering, are also discussed.
Download or read book Microgel Suspensions written by Alberto Fernandez-Nieves and published by John Wiley & Sons. This book was released on 2011-01-11 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a vital link between chemistry and physics on the nanoscale, this book offers concise coverage of the entire topic in five major sections, beginning with synthesis of microgel particles and continuing with their physical properties. The phase behavior and dynamics of resulting microgel suspensions feature in the third section, followed by their mechanical properties. It concludes with detailed accounts of numerous industrial, commercial and medical applications. Edited by David Weitz, Professor at Harvard and one of the world's pre-eminent experts in the field.
Download or read book Nanotechnology Characterization Tools for Tissue Engineering and Medical Therapy written by Challa S.S.R. Kumar and published by Springer Nature. This book was released on 2019-11-22 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ninth volume of a 40 volume series on nanoscience and nanotechnology, edited by the renowned scientist Challa S.S.R. Kumar. This handbook gives a comprehensive overview about Nanotechnology Characterization Tools for Tissue Engineering and Medical Therapy. Modern applications and state-of-the-art techniques are covered and make this volume an essential reading for research scientists in academia and industry.
Download or read book 3D Printed Microfluidic Devices written by Savas Tasoglu and published by MDPI. This book was released on 2019-01-10 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "3D Printed Microfluidic Devices" that was published in Micromachines
Download or read book Hybrid Organic Inorganic Interfaces written by Marie Helene Delville and published by John Wiley & Sons. This book was released on 2018-04-09 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: Das erste Handbuch und gut zugängliche Referenzwerk zu diesem zunehmend wichtigen Thema erläutert in einem anwendungsorientierten Ansatz Synthese, Design, Charakterisierung und Simulation von Grenzflächen bei hybriden organisch-anorganischen Materialien.
Download or read book Polymer Blends Handbook written by L. A. Utracki and published by . This book was released on 2014-01-31 with total page 1800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an international group of highly respected contributors, this fundamental reference work covers all aspects of polymer blends: science, engineering, technology and applications.
Download or read book Agricultural Biomass Based Potential Materials written by Khalid Rehman Hakeem and published by Springer. This book was released on 2015-04-01 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agricultural biomass is abundant worldwide and it can be considered as alternative source of renewable and sustainable materials which can be used as potential materials for different applications. Despite this enormous production of agricultural biomass, only a small fraction of the total biomass is utilized for different applications. Industry must be prepared to take advantage of the situation and utilize the available biomass in the best possible manner. Agricultural biomass such as natural fibres has been successfully investigated as a great potential to be used as a renewable and sustainable materials for the production of composite materials. Natural fibres offer excellent specific properties and have potential as outstanding reinforcing fillers in the matrix and can be used as an alternative material for biocomposites, hybrid composites, pulp, and paper industries. Natural fibre based polymer composites made of jute, oil palm, flex, hemp, kenaf have a low market cost, attractive with respect to global sustainability and find increasing commercial use in different applications. Agricultural biomass based composites find applications in a number of fields viz., automotive industry and construction industry. Future research on agricultural biomass-natural fibre based composites should not only be limited to its automotive applications but can be explored for its application in aircraft components, construction industry, rural housing and biomedical applications. In this book we will cover the chemical, physical, thermal, electrical, and biodegradability properties of agricultural biomass based composite materials and its different potential applications. The main goal of this volume is to familiarize researchers, scientists and engineers with the unique research opportunities and potentials of agricultural biomass based materials. Up-to-date information on alternative biomass utilization Academic and industry leaders discuss unique properties of biomass based composite materials Direct application of agricultural biomass materials as sustainable and renewable alternatives
