Download or read book Electron Microprobe Analysis and Scanning Electron Microscopy in Geology written by S. J. B. Reed and published by Cambridge University Press. This book was released on 2005-08-25 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 2005, this book covers the closely related techniques of electron microprobe analysis (EMPA) and scanning electron microscopy (SEM) specifically from a geological viewpoint. Topics discussed include: principles of electron-target interactions, electron beam instrumentation, X-ray spectrometry, general principles of SEM image formation, production of X-ray 'maps' showing elemental distributions, procedures for qualitative and quantitative X-ray analysis (both energy-dispersive and wavelength-dispersive), the use of both 'true' electron microprobes and SEMs fitted with X-ray spectrometers, and practical matters such as sample preparation and treatment of results. Throughout, there is an emphasis on geological aspects not mentioned in similar books aimed at a more general readership. The book avoids unnecessary technical detail in order to be easily accessible, and forms a comprehensive text on EMPA and SEM for geological postgraduate and postdoctoral researchers, as well as those working in industrial laboratories.
Download or read book Practical Scanning Electron Microscopy written by Joseph Goldstein and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the spring of 1963, a well-known research institute made a market survey to assess how many scanning electron microscopes might be sold in the United States. They predicted that three to five might be sold in the first year a commercial SEM was available, and that ten instruments would saturate the marketplace. In 1964, the Cambridge Instruments Stereoscan was introduced into the United States and, in the following decade, over 1200 scanning electron microscopes were sold in the U. S. alone, representing an investment conservatively estimated at $50,000- $100,000 each. Why were the market surveyers wrongil Perhaps because they asked the wrong persons, such as electron microscopists who were using the highly developed transmission electron microscopes of the day, with resolutions from 5-10 A. These scientists could see little application for a microscope that was useful for looking at surfaces with a resolution of only (then) about 200 A. Since that time, many scientists have learned to appreciate that information content in an image may be of more importance than resolution per se. The SEM, with its large depth of field and easily that often require little or no sample prepara interpreted images of samples tion for viewing, is capable of providing significant information about rough samples at magnifications ranging from 50 X to 100,000 X. This range overlaps considerably with the light microscope at the low end, and with the electron microscope at the high end.
Download or read book Biomedical Applications of Microprobe Analysis written by Peter Ingram and published by Academic Press. This book was released on 1999-10-29 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomedical Applications of Microprobe Analysis is a combination reference/laboratory manual for the use of microprobe analysis in both clinical diagnostic and research settings. Also called microchemical microscopy, microprobe analysis uses high-energy bombardment of cells and tissue, in combination with high resolution EM or confocal microscopy to provide a profile of the ion, metal, and mineral concentrations present in a sample. This allows insight into the physiology and pathophysiology of a wide variety of cells and tissues.This book describes methods for obtaining detailed information about the identity and composition of particles too small to be seen with the naked eye and describes how this information can be useful in diagnostic and biomedical research. - Up-to-date review of electron microprobe analysis - Detailed descriptions of sample preparation techniques - Recent technologies including confocal microscopy, infrared microspectroscopy, and laser raman spectroscopy - Over 100 illustrations with numerous specific applications - Contributions by world-renowned experts in the field - Brief summary of highlights precedes each chapter
Download or read book Electron Microprobe Analysis written by S. J. B. Reed and published by . This book was released on 1993-01-28 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1993 paperback of successful physics monograph on electron microprobe analysis, a widely used technique.
Download or read book Absorption Correction Tables for Microprobe Analysis written by J. W. Colby and published by . This book was released on 1964 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electron Probe Quantitation written by K.F.J. Heinrich and published by Springer Science & Business Media. This book was released on 1991-06-30 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1968, the National Bureau of Standards (NBS) published Special Publication 298 "Quantitative Electron Probe Microanalysis," which contained proceedings of a seminar held on the subject at NBS in the summer of 1967. This publication received wide interest that continued through the years far beyond expectations. The present volume, also the result of a gathering of international experts, in 1988, at NBS (now the National Institute of Standards and Technology, NIST), is intended to fulfill the same purpose. After years of substantial agreement on the procedures of analysis and data evaluation, several sharply differentiated approaches have developed. These are described in this publi cation with all the details required for practical application. Neither the editors nor NIST wish to endorse any single approach. Rather, we hope that their exposition will stimulate the dialogue which is a prerequisite for technical progress. Additionally, it is expected that those active in research in electron probe microanalysis will appreciate more clearly the areas in which further investigations are warranted.
Download or read book Electron Probe Microanalysis written by A. J. Tousimis and published by . This book was released on 1969 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microprobe Techniques in the Earth Sciences written by Philip J. Potts and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: 30% discount for members of The Mineralogical Society of Britain and Ireland This text covers the range of microanalytical techniques available for the analysis of geological samples, principally in research applications. Each chapter is written in a clear, informative style and has a tutorial element, designed to introduce each technique for the beginning and experienced researcher alike.
Download or read book Applications of Microanalytical Techniques to Understanding Mineralizing Processes written by Michael A. McKibben and published by . This book was released on 1998 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Compendium of Surface and Interface Analysis written by The Surface Science Society of Japan and published by Springer. This book was released on 2018-02-19 with total page 807 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concisely illustrates the techniques of major surface analysis and their applications to a few key examples. Surfaces play crucial roles in various interfacial processes, and their electronic/geometric structures rule the physical/chemical properties. In the last several decades, various techniques for surface analysis have been developed in conjunction with advances in optics, electronics, and quantum beams. This book provides a useful resource for a wide range of scientists and engineers from students to professionals in understanding the main points of each technique, such as principles, capabilities and requirements, at a glance. It is a contemporary encyclopedia for selecting the appropriate method depending on the reader's purpose.
Download or read book Electron Probe Microanalysis written by Karl Zierold and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of electron probe microanalysis of biological systems is to identify, localize, and quantify elements, mass, and water in cells and tissues. The method is based on the idea that all electrons and photons emerging from an electron beam irradiated specimen contain information on its structure and composition. In particular, energy spectroscopy of X-rays and electrons after interaction of the electron beam with the specimen is used for this purpose. However, the application of this method in biology and medicine has to overcome three specific problems: 1. The principle constituent of most cell samples is water. Since liquid water is not compatible with vacuum conditions in the electron microscope, specimens have to be prepared without disturbing the other components, in parti cular diffusible ions (elements). 2. Electron probe microanaly sis provides physical data on either dry specimens or fully hydrated, frozen specimens. This data usually has to be con verted into quantitative data meaningful to the cell biologist or physiologist. 3. Cells and tissues are not static but dynamic systems. Thus, for example, microanalysis of physiolo gical processes requires sampling techniques which are adapted to address specific biological or medical questions. During recent years, remarkable progress has been made to overcome these problems. Cryopreparation, image analysis, and electron energy loss spectroscopy are key areas which have solved some problems and offer promise for future improvements.
Download or read book A Handbook of Silicate Rock Analysis written by P.J. Potts and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: without an appreciation of what happens in between. The techniques available for the chemical analysis of silicate rocks have undergone a revolution over the last 30 years. However, to use an analytical technique most effectively, No longer is the analytical balance the only instrument used it is essential to understand its analytical characteristics, in for quantitative measurement, as it was in the days of classi particular the excitation mechanism and the response of the cal gravimetric procedures. A wide variety of instrumental signal detection system. In this book, these characteristics techniques is now commonly used for silicate rock analysis, have been described within a framework of practical ana lytical aplications, especially for the routine multi-element including some that incorporate excitation sources and detec tion systems that have been developed only in the last few analysis of silicate rocks. All analytical techniques available years. These instrumental developments now permit a wide for routine silicate rock analysis are discussed, including range of trace elements to be determined on a routine basis. some more specialized procedures. Sufficient detail is In parallel with these exciting advances, users have tended included to provide practitioners of geochemistry with a firm to become more remote from the data production process. base from which to assess current performance, and in some This is, in part, an inevitable result of the widespread intro cases, future developments.
Download or read book Microprobe Analysis in Medicine written by Peter Ingram and published by . This book was released on 1989 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: A work reviewing the applications of new microprobe analysis techniques in medicine. Authoritative chapters illustrate a variety of techniques and demonstrate appropriate applications to specific diseases. Key coverage includes pulmonary pathology and asbestoses.
Download or read book Scanning Electron Microscopy and X Ray Microanalysis written by Joseph Goldstein and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has evolved by processes of selection and expansion from its predecessor, Practical Scanning Electron Microscopy (PSEM), published by Plenum Press in 1975. The interaction of the authors with students at the Short Course on Scanning Electron Microscopy and X-Ray Microanalysis held annually at Lehigh University has helped greatly in developing this textbook. The material has been chosen to provide a student with a general introduction to the techniques of scanning electron microscopy and x-ray microanalysis suitable for application in such fields as biology, geology, solid state physics, and materials science. Following the format of PSEM, this book gives the student a basic knowledge of (1) the user-controlled functions of the electron optics of the scanning electron microscope and electron microprobe, (2) the characteristics of electron-beam-sample inter actions, (3) image formation and interpretation, (4) x-ray spectrometry, and (5) quantitative x-ray microanalysis. Each of these topics has been updated and in most cases expanded over the material presented in PSEM in order to give the reader sufficient coverage to understand these topics and apply the information in the laboratory. Throughout the text, we have attempted to emphasize practical aspects of the techniques, describing those instru ment parameters which the microscopist can and must manipulate to obtain optimum information from the specimen. Certain areas in particular have been expanded in response to their increasing importance in the SEM field. Thus energy-dispersive x-ray spectrometry, which has undergone a tremendous surge in growth, is treated in substantial detail.
Download or read book Combined Electron Microscope Electron Diffraction and Electron Microprobe Analysis of Identical Microstructures in the Debond Area of a Dissimilar Metal Joint written by L. G. Bostwick and published by . This book was released on 1971 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Social Life of Pots written by Judith A. Habicht-Mauche and published by University of Arizona Press. This book was released on 2022-09-06 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demographic upheavals that altered the social landscape of the Southwest from the thirteenth through the seventeenth centuries forced peoples from diverse backgrounds to literally remake their worlds—transformations in community, identity, and power that are only beginning to be understood through innovations in decorated ceramics. In addition to aesthetic changes that included new color schemes, new painting techniques, alterations in design, and a greater emphasis on iconographic imagery, some of the wares reflect a new production efficiency resulting from more specialized household and community-based industries. Also, they were traded over longer distances and were used more often in public ceremonies than earlier ceramic types. Through the study of glaze-painted pottery, archaeologists are beginning to understand that pots had “social lives” in this changing world and that careful reconstruction of the social lives of pots can help us understand the social lives of Puebloan peoples. In this book, fifteen contributors apply a wide range of technological and stylistic analysis techniques to pottery of the Rio Grande and Western Pueblo areas to show what it reveals about inter- and intra-community dynamics, work groups, migration, trade, and ideology in the precontact and early postcontact Puebloan world. The contributors report on research conducted throughout the glaze producing areas of the Southwest and cover the full historical range of glaze ware production. Utilizing a variety of techniques—continued typological analyses, optical petrography, instrumental neutron activation analysis, X-ray microprobe analysis, and inductively coupled plasma mass spectroscopy—they develop broader frameworks for examining the changing role of these ceramics in social dynamics. By tracing the circulation and exchange of specialized knowledge, raw materials, and the pots themselves via social networks of varying size, they show how glaze ware technology, production, exchange, and reflected a variety of dynamic historical and social processes. Through this material evidence, the contributors reveal that technological and aesthetic innovations were deliberately manipulated and disseminated to actively construct “communities of practice” that cut across language and settlement groups. The Social Life of Pots offers a wealth of new data from this crucial period of prehistory and is an important baseline for future work in this area. Contributors Patricia Capone Linda S. Cordell Suzanne L. Eckert Thomas R. Fenn Judith A. Habicht-Mauche Cynthia L Herhahn Maren Hopkins Deborah L. Huntley Toni S. Laumbach Kathryn Leonard Barbara J. Mills Kit Nelson Gregson Schachner Miriam T. Stark Scott Van Keuren
Download or read book Synchrotron Radiation Research written by Herman Winick and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has grown out of our shared experience in the development of the Stanford Synchrotron Radiation Laboratory (SSRL), based on the electron-positron storage ring SPEAR at the Stanford Linear Accelerator Center (SLAC) starting in Summer, 1973. The immense potential of the photon beam from SPEAR became obvious as soon as experiments using the beam started to run in May, 1974. The rapid growth of interest in using the beam since that time and the growth of other facilities using high-energy storage rings (see Chapters 1 and 3) demonstrates how the users of this source of radiation are finding applications in an increasingly wide variety of fields of science and technology. In assembling the list of authors for this book, we have tried to cover as many of the applications of synchrotron radiation, both realized already or in the process of realization, as we can. Inevitably, there are omissions both through lack of space and because many projects are at an early stage. We thank the authors for their efforts and cooperation in producing what we believe is the most comprehensive treatment of synchrotron radiation research to date.
