Download or read book Micromechanics in Practice written by Michal Šejnoha and published by WIT Press. This book was released on 2013 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book will concentrate on the application of micromechanics to the analysis of practical engineering problems. Both classical composites represented by carbon/carbon textile laminates and applications in Civil Engineering including asphalts and masonry structures will be considered. A common denominator of these considerably distinct material systems will be randomness of their internal structure. Also, owing to their complexity, all material systems will be studied on multiple scales. Since real engineering, rather than academic, problems are of the main interest, these scales will be treated independently from each other on the grounds of fully uncoupled multi-scale analysis. Attention will be limited to elastic and viscoelastic behaviour and to the linear heat transfer analysis. To achieve this, the book will address two different approaches to the homogenization of systems with random microstructures. In particular, classical averaging schemes based on the Eshelby solution of a solitary inclusion in an infinite medium represented by the Hashin-Shtrikman variational principles or by considerably simpler and more popular Mori-Tanaka method will be compared to detailed finite element simulations of a certain representative volume element (RVE) representing accommodated geometrical details of respective microstructures. These are derived by matching material statistics such as the one- and two-point probability functions of real and artificial microstructures. The latter one is termed the statistically equivalent periodic unit cell owing to the assumed periodic arrangement of reinforcements (carbon fibres, carbon fibre tows, stones or masonry bricks) in a certain matrix (carbon matrix, asphalt mastic, mortar). Other types of materials will be introduced in the form of exercises with emphases to the application of the Mori-Tanaka method in the framework of the previously mentioned uncoupled multi-scale analysis

Download or read book Practical Micromechanics of Composite Materials written by Jacob Aboudi and published by Butterworth-Heinemann. This book was released on 2021-08-31 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Micromechanics of Composite Materials provides an accessible treatment of micromechanical theories for the analysis and design of multi-phased composites. Written with both students and practitioners in mind and coupled with a fully functional MATLAB code to enable the solution of technologically relevant micromechanics problems, the book features an array of illustrative example problems and exercises highlighting key concepts and integrating the MATLAB code. The MATLAB scripts and functions empower readers to enhance and create new functionality tailored to their needs, and the book and code highly complement one another. The book presents classical lamination theory and then proceeds to describe how to obtain effective anisotropic properties of a unidirectional composite (ply) via micromechanics and multiscale analysis. Calculation of local fields via mechanical and thermal strain concentration tensors is presented in a unified way across several micromechanics theories. The importance of these local fields is demonstrated through the determination of consistent Margins of Safety (MoS) and failure envelopes for thermal and mechanical loading. Finally, micromechanics-based multiscale progressive damage is discussed and implemented in the accompanying MATLAB code. Emphasizes appropriate application of micromechanics theories to composite behavior Addresses multiple popular micromechanics theories, which are provided in MATLAB Discusses stresses and strains resulting from realistic thermal and mechanical loading Includes availability of solution manual for professors using the book in the classroom

Download or read book Micromechanics and Nanoscale Effects written by Vasyl Michael Harik and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume consists of the state-of-the-art reports on new developments in micromechanics and the modeling of nanoscale effects, and is a companion book to the recent Kluwer volume on nanomechanics and mul- scale modeling (it is entitled Trends in Nanoscale Mechanics). The two volumes grew out of a series of discussions held at NASA Langley Research Center (LaRC), lectures and other events shared by many researchers from the national research laboratories and academia. The key events include the 2001 Summer Series of Round-Table Discussions on Nanotechnology at ICASE Institute (NASA LaRC) organized by Drs. V. M. Harik and M. D. Salas and the 2002 NASA LaRC Workshop on Multi-scale Modeling. The goal of these interactions was to foster collaborations between academic researchers and the ICASE Institute (NASA LaRC), a universi- based institute, which has pioneered world-class computational, theoretical and experimental research in the disciplines that are important to NASA. Editors gratefully acknowledge help of Ms. E. Todd (ICASE, NASA LaRC), the ICASE Director M. D. Salas and all reviewers, in particular, Dr. B. Diskin (ICASE/NIA, NASA LaRC), Prof. R. Haftka (University of Florida), Dr. V. M. Harik (ICASE/Swales Aerospace, NASA LaRC), Prof.

Download or read book Introduction to Micromechanics and Nanomechanics written by Shaofan Li and published by World Scientific Publishing Company. This book was released on 2017-12-05 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a systematic treatise on micromechanics and nanomechanics, which encompasses many important research and development areas such as composite materials and homogenizations, mechanics of quantum dots, multiscale analysis and mechanics, defect mechanics of solids including fracture and dislocation mechanics, etc. In this second edition, some previous chapters are revised, and some new chapters added — crystal plasticity, multiscale crystal defect dynamics, quantum force and stress, micromechanics of metamaterials, and micromorphic theory. The book serves primarily as a graduate textbook and intended as a reference book for the next generation of scientists and engineers. It also has a unique pedagogical style that is specially suitable for self-study and self-learning for many researchers and professionals who do not have time attending classes and lectures.

Download or read book Continuum Micromechanics written by P. Suquet and published by Springer. This book was released on 2014-05-04 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent progress of fundamental nature made in the new developed field of micromechanics: transformation field analysis, variational bounds for nonlinear composites, higher-order gradients in micromechanical damage models, dynamics of composites, pattern based variational bounds.

Download or read book Micromechanics of Composites written by Volodymyr Kushch and published by Butterworth-Heinemann. This book was released on 2013-05-13 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromechanics of Composites: Multipole Expansion Approach is the first book to introduce micromechanics researchers to a more efficient and accurate alternative to computational micromechanics, which requires heavy computational effort and the need to extract meaningful data from a multitude of numbers produced by finite element software code. In this book Dr. Kushch demonstrates the development of the multipole expansion method, including recent new results in the theory of special functions and rigorous convergence proof of the obtained series solutions. The complete analytical solutions and accurate numerical data contained in the book have been obtained in a unified manner for a number of the multiple inclusion models of finite, semi- and infinite heterogeneous solids. Contemporary topics of micromechanics covered in the book include composites with imperfect and partially debonded interface, nanocomposites, cracked solids, statistics of the local fields, and brittle strength of disordered composites. Contains detailed analytical and numerical analyses of a variety of micromechanical multiple inclusion models, providing clear insight into the physical nature of the problems under study Provides researchers with a reliable theoretical framework for developing the micromechanical theories of a composite’s strength, brittle/fatigue damage development and other properties Includes a large amount of highly accurate numerical data and plots for a variety of model problems, serving as a benchmark for testing the applicability of existing approximate models and accuracy of numerical solutions

Download or read book Materials Characterisation VII written by C.A. Brebbia and published by WIT Press. This book was released on 2015-04-22 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing papers presented at the Seventh International Conference on Materials Characterisation, this book presents the latest advances in a rapidly developing field that requires the application of a combination of numerical and experimental methods. The work has been contributed by researchers who use computational methods, those who perform experiments, and those who combine both. Materials characterisation is important to ensuring that new products meet the needs of industry and consumers. The accurate characterisation of the physical and chemical properties of the materials requires the application of both experimental techniques and computer simulation methods. The wide range of materials now available, from metals to polymers and semiconductors to composites, necessitates a variety of experimental techniques and numerical methods. The papers in the book examine various combinations of techniques. The papers cover such topics as: Mechanical Characterisation and Testing; Micro and Macro Materials Characterisation; Cementitious Materials; Advances in Composites; Semiconductor Materials Characterisation; Computational Models and Experiments; Corrosion Problems.

Download or read book Macro and Micro Mechanics of High Velocity Deformation and Fracture written by Kozo Kawata and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUTAM Symposium on Macro- and Micro-Mechanics of High Velocity Deformation and Fracture (MMMHVDF) (August 12 - 15, 1985) was held at Science Council of Japan, under the sponsor ship of IUTAM, Science Council of Japan, Japan Society for the Promotion of Science, The Commemorative Association for the Japan World Exposition (1970), and The Japan Society for Aeronautical and Space Sciences. The proposal of the symposium was accepted by the General Assembly of IUTAM, and the scientists mentioned below were appointed by the Bureau of IUTAM to serve as member of the Scientific Committee. The main object of the Symposium was to make a general survey of recent developments in the re search of high velocity solid mechanics and to explore further new ideas for dealing with unsettled problems, of fundamental nature as well as of practical importance. The subjects covered theoretical, experimental, and numerical fields in macro- and micro-mechanics associated with high velocity de formatio~ and fracture in soldis, covering metals, ceramics, polymers, and composites.

Download or read book Introduction to Micromechanics written by Khanh Chau Le and published by . This book was released on 2020-02-19 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a clearly written introduction to micromechanics for graduate students of mechanical engineering and material science. The textbook contains the rigorous theoretical basis for mechanics of materials as well as a large number of examples, numerical simulations of practical importance, and exercises in phase transition, fracture mechanics, dislocations, homogenization, and plasticity.

Download or read book Surface Effects and Contact Mechanics including Tribology XII written by J.Th.M. De Hossen and published by WIT Press. This book was released on 2015-04-21 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains papers from the twelfth in a series of biennial conferences, first held in 1993, on the topics of contact mechanics and surface effects and their interaction. In general, structural components fail by wear, corrosion and fatigue, that is to say affected and initiated by surface conditions. Consequently, it is often appropriate to modify the surface layer of a base material or coat it, so as to provide an enhanced performance or longer life. However, in many cases it is the combined effect of wear and corrosion that is damaging, contributing to complexity in determining the proper approach. The surface treatment chosen should be suitably related to the problem to be solved. The necessary thickness of the coating depends largely on the applied loading and environmental conditions. The papers in the book address novel protective layers for advances in sliding wear and low friction. The contents cover topics such as: Experimental and Measurement Tests; Surface Modification; Surface Problems in Contact Mechanics; Thick and Thin Coatings; Tribomechanics; Computer Simulation.

Download or read book Micromechanics and Nanomechanics of Composite Solids written by Shaker A. Meguid and published by Springer. This book was released on 2017-07-19 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book elucidates the most recent and highly original developments in the fields of micro- and nanomechanics and the corresponding homogenization techniques that can be reliably adopted and applied in determining the local properties, as well as the linear and nonlinear effective properties of the final architecture of these complex composite structures. Specifically, this volume, divided into three main sections—Fundamentals, Modeling, and Applications—provides recent developments in the mathematical framework of micro- and nanomechanics, including Green’s function and Eshelby’s inclusion problem, molecular mechanics, molecular dynamics, atomistic based continuum, multiscale modeling, and highly localized phenomena such as microcracks and plasticity. It is a compilation of the most recent efforts by a group of the world’s most talented and respected researchers. Ideal for graduate students in aerospace, mechanical, civil, material science, life sciences, and biomedical engineering, researchers, practicing engineers, and consultants, the book provides a unified approach in compiling micro- and nano-scale phenomena. · Elucidates recent and highly original developments in the fields of micromechanics and nanomechanics and the corresponding homogenization techniques; · Includes several new topics that are not covered in the current literature, such as micromechanics of metamaterials, electrical conductivity of CNT and graphene nanocomposites, ferroelectrics, piezoelectric, and electromagnetic materials; · Addresses highly localized phenomena such as coupled field problems, microcracks, inelasticity, dispersion of CNTs, synthesis, characterization and a number of interesting applications; · Maximizes readers’ ability to apply theories of micromechanics and nanomechanics to heterogeneous solids; · Illustrates application of micro- and nanomechanical theory to design novel composite and nanocomposite materials.

Download or read book Micromechanics of Materials with Applications written by Mark Kachanov and published by Springer. This book was released on 2018-04-17 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on micromechanics explores both traditional aspects and the advances made in the last 10–15 years. The viewpoint it assumes is that the rapidly developing field of micromechanics, apart from being of fundamental scientific importance, is motivated by materials science applications. The introductory chapter provides the necessary background together with some less traditional material, examining e.g. approximate elastic symmetries, Rice’s technique of internal variables and multipole expansions. The remainder of the book is divided into the following parts: (A) classic results, which consist of Rift Valley Energy (RVE), Hill’s results, Eshelby’s results for ellipsoidal inhomogeneities, and approximate schemes for the effective properties; (B) results aimed at overcoming these limitations, such as volumes smaller than RVE, quantitative characterization of “irregular” microstructures, non-ellipsoidal inhomogeneities, and cross-property connections; (C) local fields and effects of interactions on them; and lastly (D) – the largest section – which explores applications to eight classes of materials that illustrate how to apply the micromechanics methodology to specific materials.

Download or read book Recent Developments in Micromechanics written by D.R. Axelrad and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the lectures presented at the mini-symposium on "Micromechanics" held in conjunction with the CSME Mechanical Engineer ing Forum 1990 between the 3rd and 8th June, 1990 at the University of Toronto, Canada. The expressed purpose of this symposium was to discuss some recent developments in the Micromechanics of Materials and how ad vances in this field now relate to the solution of practical engineer ing problems. Due to the time limit set for this section of the Engineer ing Forum as well as the restriction on the number of papers to be pre sented, it was not possible to cover a much wider range of topics. How ever, an attempt was made to include the most important advances asso ciated with the progress made in micromechanics in its application to material science and engineering over the past decade. Thus, the topics are concerned with: the fundamental aspects of the thermodynamics of structured solids (part I), - the micromechanical behaviour of alloys (part II), - the modelling of the material behaviour on the basis of continuum theory (part III), and finally the important new approach to the characterization of various mate rials and their responses to external agencies by the use of proba bilistic micromechanics (part IV). We would like to take this opportunity to thank the Chairman of the Organizing Committee, Prof. F. P. J. Rimrott, and the President of the CSME, Prof. T. S.

Download or read book Computational Approaches to Materials Design Theoretical and Practical Aspects written by Datta, Shubhabrata and published by IGI Global. This book was released on 2016-06-16 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of new and superior materials is beneficial within industrial settings, as well as a topic of academic interest. By using computational modeling techniques, the probable application and performance of these materials can be easily evaluated. Computational Approaches to Materials Design: Theoretical and Practical Aspects brings together empirical research, theoretical concepts, and the various approaches in the design and discovery of new materials. Highlighting optimization tools and soft computing methods, this publication is a comprehensive collection for researchers, both in academia and in industrial settings, and practitioners who are interested in the application of computational techniques in the field of materials engineering.

Download or read book Aluminium Alloy Corrosion of Aircraft Structures written by J. A. DeRose and published by WIT Press. This book was released on 2013 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the latest research, this book applies new modeling techniques to corrosion issues in aircraft structures. It describes complex numerical models and simulations from the microscale to the macroscale for corrosion of the aluminum (Al) alloys that are typically used for aircraft construction, such as AA2024. The approach is also applicable to a range of other types of structures, such as automobiles and other forms of ground vehicles. The main motivation for developing the corrosion models and simulations was to make significant technical advances in the fields of aircraft design (using current and new materials), surface protection systems (against corrosion and degradation) and maintenance. The corrosion models address pitting and intergranular corrosion (microscale) of Al alloys, crevice corrosion in occluded areas, such as joints (mesoscale), galvanic corrosion of aircraft structural elements (macroscale), as well as, the effect of surface protection methods (anodization, corrosion inhibitor release, clad layer, etc.). The book describes the electrochemical basis for the models, their numerical implementation, and experimental validation and how the corrosion rate of the Al alloys at the various scales is influenced by its material properties and the surface protection methods. It will be of interest to scientists and engineers interested in corrosion modeling, aircraft corrosion, corrosion of other types of vehicle structures such as automobiles and ground vehicles, electrochemistry of corrosion, galvanic corrosion, crevice corrosion, and intergranular corrosion.--

Download or read book Micromechanics of Defects in Solids written by T. Mura and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book stems from a course on Micromechanics that I started about fifteen years ago at Northwestern University. At that time, micromechanics was a rather unfamiliar subject. Although I repeated the course every year, I was never convinced that my notes have quite developed into a final manuscript because new topics emerged constantly requiring revisions, and additions. I finally came to realize that if this is continued, then I will never complete the book to my total satisfaction. Meanwhile, T. Mori and I had coauthored a book in Japanese, entitled Micromechanics, published by Baifu-kan, Tokyo, in 1975. It received an extremely favorable response from students and re searchers in Japan. This encouraged me to go ahead and publish my course notes in their latest version, as this book, which contains further development of the subject and is more comprehensive than the one published in Japanese. Micromechanics encompasses mechanics related to microstructures of materials. The method employed is a continuum theory of elasticity yet its applications cover a broad area relating to the mechanical behavior of materi als: plasticity, fracture and fatigue, constitutive equations, composite materi als, polycrystals, etc. These subjects are treated in this book by means of a powerful and unified method which is called the 'eigenstrain method. ' In particular, problems relating to inclusions and dislocations are most effectively analyzed by this method, and therefore, special emphasis is placed on these topics.

Download or read book Introduction to Micromechanics and Nanomechanics written by Shaofan Li and published by World Scientific Publishing Company. This book was released on 2008-07-28 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides both the theoretical foundation, as well as the authors' latest contributions to micromechanics and its applications in nanomechanics, nanocomposites, dislocation and thin film theories, and configurational mechanics theory. It serves primarily as a graduate level textbook, intended for first year graduate students in materials science, applied computational mechanics, nano-science and technology, and mechanical engineering. This book also serves as a research monograph by compiling recent developments in dislocation dynamics, numerical simulations of material failure, and homogenization theories.