Download or read book Micromechanics and Micromechanisms of Deformation and Fracture written by and published by . This book was released on 2001 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Special Issue Micromechanics and Micromechanisms of Deformation and Fracture written by M. C. Boyce and published by . This book was released on 2001 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micromechanisms of Fracture and Fatigue written by Jaroslav Pokluda and published by Springer Science & Business Media. This book was released on 2010-05-27 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromechanisms of Fracture and Fatigue forms the culmination of 20 years of research in the field of fatigue and fracture. It discusses a range of topics and comments on the state of the art for each. The first part is devoted to models of deformation and fracture of perfect crystals. Using various atomistic methods, the theoretical strength of solids under simple and complex loading is calculated for a wide range of elements and compounds, and compared with experimental data. The connection between the onset of local plasticity in nanoindentation tests and the ideal shear strength is analysed using a multi-scale approach. Moreover, the nature of intrinsic brittleness or ductility of perfect crystal lattices is demonstrated by the coupling of atomistic and mesoscopic approaches, and compared with brittle/ductile behaviour of engineering materials. The second part addresses extrinsic sources of fracture toughness of engineering materials, related to their microstructure and microstructurally-induced crack tortuosity. Micromechanisms of ductile fracture are also described, in relation to the fracture strain of materials. Results of multilevel modelling, including statistical aspects of microstructure, are used to explain remarkable phenomena discovered in experiments. In the third part of the book, basic micromechanisms of fatigue cracks propagation under uniaxial and multiaxial loading are discussed on the basis of the unified mesoscopic model of crack tip shielding and closure, taking both microstructure and statistical effects into account. Applications to failure analysis are also outlined, and an attempt is made to distinguish intrinsic and extrinsic sources of materials resistance to fracture. Micromechanisms of Fracture and Fatigue provides scientists, researchers and postgraduate students with not only a deep insight into basic micromechanisms of fracture behaviour of materials, but also a number of engineering applications.
Download or read book On Deformation and Fracture of Amorphous Polymer rubber Blends written by Alexander Cornelis Steenbrink and published by . This book was released on 1998 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture Mechanics written by Shantikumar Vasudevan Nair and published by . This book was released on 1989 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deformation and Fracture Mechanics of Engineering Materials written by Richard W. Hertzberg and published by John Wiley & Sons. This book was released on 2020-07-08 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deformation and Fracture Mechanics of Engineering Materials, Sixth Edition, provides a detailed examination of the mechanical behavior of metals, ceramics, polymers, and their composites. Offering an integrated macroscopic/microscopic approach to the subject, this comprehensive textbook features in-depth explanations, plentiful figures and illustrations, and a full array of student and instructor resources. Divided into two sections, the text first introduces the principles of elastic and plastic deformation, including the plastic deformation response of solids and concepts of stress, strain, and stiffness. The following section demonstrates the application of fracture mechanics and materials science principles in solids, including determining material stiffness, strength, toughness, and time-dependent mechanical response. Now offered as an interactive eBook, this fully-revised edition features a wealth of digital assets. More than three hours of high-quality video footage helps students understand the practical applications of key topics, supported by hundreds of PowerPoint slides highlighting important information while strengthening student comprehension. Numerous real-world examples and case studies of actual service failures illustrate the importance of applying fracture mechanics principles in failure analysis. Ideal for college-level courses in metallurgy and materials, mechanical engineering, and civil engineering, this popular is equally valuable for engineers looking to increase their knowledge of the mechanical properties of solids.
Download or read book Fracture Mechanics written by Dietmar Gross and published by Springer. This book was released on 2017-11-28 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: - self-contained and well illustrated - complete and comprehensive derivation of mechanical/mathematical results with enphasis on issues of practical importance - combines classical subjects of fracture mechanics with modern topics such as microheterogeneous materials, piezoelectric materials, thin films, damage - mechanically and mathematically clear and complete derivations of results
Download or read book Micromechanics of Fracture in Generalized Spaces written by Ihar Alaksandravich Miklashevich and published by Elsevier. This book was released on 2008-01-08 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: By the detailed analysis of the modern development of the mechanics of deformable media can be found the deep internal contradiction. From the one hand it is declared that the deformation and fracture are the hierarchical processes which are linked and unite several structural and scale levels. From the other hand the sequential investigation of the hierarchy of the deformation and destruction is not carried out. The book’s aim is filling this mentioned gap and investigates the hot topic of the fracture of non-ideal media. From the microscopic point of view in the book we study the hierarchy of the processes in fractured solid in the whole diapason of practically used scales. According the multilevel hierarchical system ideology under “microscopic we understand taking into account the processes on the level lower than relative present strata. From hierarchical point of view the conception of “microscopic fracture can be soundly applied to the traditionally macroscopic area, namely geomechanics or main crack propagation. At the same time microscopic fracture of the nanomaterials can be well-grounded too. This ground demands the investigation on the level of inter-atomic interaction and quantum mechanical description. The important feature of the book is the application of fibred manifolds and non-Euclidean spaces to the description of the processes of deformation and fracture in inhomogeneous and defected continua. The non-Euclidean spaces for the dislocations’ description were introduced by J.F. Nye, B.A. Bilby, E. Kröner, K. Kondo in fiftieth. In last decades this necessity was shown in geomechanics and theory of seismic signal propagation. The applications of non-Euclidean spaces to the plasticity allow us to construct the mathematically satisfying description of the processes. Taking into account this space expansion the media with microstructure are understood as Finsler space media. The bundle space technique is used for the description of the influence of microstructure on the continuum metrics. The crack propagation is studied as a process of movement in Finsler space. Reduction of the general description to the variational principle in engineering case is investigated and a new result for the crack trajectory in inhomogeneous media is obtained. Stability and stochastization of crack trajectory in layered composites is investigated. The gauge field is introduced on the basis of the structure representation of Lie group generated by defects without any additional assumption. Effective elastic and non-elastic media for nanomaterials and their geometrical description are discussed. The monograph provides the basis for more detailed and exact description of real processes in the material. The monograph will be interesting for the researchers in the field of fracture mechanics, solid state physics and geomechanics. It can be used as well by the last year students wishing to become more familiar with some modern approaches to the physics of fracture and continual theory of dislocations. In Supplement, written by V.V.Barkaline, quantum mechanical concept of physical body wholeness according to H. Primas is discussed with relation to fracture. Role of electronic subsystem in fracture dynamics in adiabatic and non-adiabatic approximations is clarified. Potential energy surface of ion subsystem accounting electron contribution is interpreted as master parameter of fracture dynamics. Its features and relation to non-euclidean metrics of defected solid body is discussed. Quantum mechanical criteria of fracture arising are proposed.
Download or read book Fracture micromechanics of polymer materials written by V.S. Kuksenko and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the last two decades fracture theory has been one of the most rapidly advancing fields of continuous media mechanics. Noteworthy suc cess has been achieved in linear fracture mechanics where the propagation of the macrocrack in elastic materials is under study. However, fracture of materials is by no means a simple process since it involves fracture of structural elements ranging from atomic sizes to macrocracks. To obtain all information about how and why materials fail, all stages of the process must be studied. For a long time both mechanical engineers and physicists have been concerned with the problem of the fracture of solids. Unfortunately, most of their work has been independent of the others. To solve the problem not only requires the minds and work of mechanical engineers and physicists but chemists and other specialists must be consulted as well. In this book we will consider some conclusions of the "physical" and "mechanical" schools acquired by the A. F. Joffe Physics-Technical Institute of the USSR Academy of Sciences in Leningrad and the Institute of Polymer Mechanics of Latvian SSR Academy of Sciences in Riga. The methods for studying the phenomena of fracture applied at both Institutes are different yet complimentary to one another; the materials tested are also sometimes different.
Download or read book Deformation and Fracture Mechanics of Engineering Materials written by Richard W. Hertzberg and published by . This book was released on 1996 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition comprehensively updates the field of fracture mechanics by including details of the latest research programmes. It contains new material on non-metals, design issues and statistical aspects. The application of fracture mechanics to different types of materials is stressed.
Download or read book Mechanics of Finite Deformation and Fracture written by Majid Aleyaasin and published by CRC Press. This book was released on 2016-01-05 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important work covers the fundamentals of finite deformation in solids and constitutive relations for different types of stresses in large deformation of solids. In addition, the book covers the fracture phenomena in brittle or quasi-brittle materials in which large deformation does not occur. The book provides a thorough understanding of frac
Download or read book Micromechanics and Nanosimulation of Metals and Composites written by Siegfried Schmauder and published by Springer Science & Business Media. This book was released on 2008-10-20 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The strength of metallic materials determines the usability and reliability of all the machines, tools and equipment around us. Yet, the question about which mechanisms control the strength and damage resistance of materials and how they can be optimised remains largely unanswered. How do real, heterogeneous ma- rials deform and fail? Why can a small modification of the microstructure increase the strength and damage resistance of materials manifold? How can the strength of heterogeneous materials be predicted? The purpose of this book is to present different experimental and computational analysis methods of micromechanics of damage and strength of materials and to demonstrate their applications to various micromechanical problems. This book summarizes at a glance some of the publications of the Computational Mechanics Group at the IMWF/MPA Stuttgart, dealing with atomistic, micro- and meso- chanical modelling and experimental analysis of strength and damage of metallic materials. In chapter 1, the micromechanisms of damage and fracture in different groups of materials are investigated experimentally, using direct observations and inverse analysis. The interaction of microstructural elements with the evolving damage is studied in these experiments. Chapter 2 presents different approaches to the - cromechanical simulation of composite materials: embedded unit cells, multiphase finite elements and multiparticle unit cells. Examples of the application of these models to the analysis of deformation and damage in different materials are given. Chapter 3 deals with the methods of numerical modelling of damage evolution and crack growth in heterogeneous materials.
Download or read book Mechanisms of Deformation and Fracture written by K. E. Easterling and published by Elsevier. This book was released on 2013-10-22 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanisms of Deformation and Fracture contains the proceedings of the Interdisciplinary Conference on the Mechanisms of Deformation and Fracture held at the University of Luleå in Sweden on September 20-22, 1978. The papers explore the mechanisms underlying deformation and fracture of materials such as pearlite, metals, quartz, soils, and rocks. Results of theoretical and experimental studies on topics ranging from electromagnetic detection of low-cycle fatigue to stress and strain distribution in two-phase systems are presented. This book is comprised of 37 chapters and begins with a discussion on the interrelationships among solid mechanics, earth sciences, and material sciences. Subsequent chapters focus on the low-cycle behavior of case hardened steel; deformation and shear of normally consolidated flocculated kaolin; analytical modeling in inelasticity; creep mechanisms in clay; and initiation of crack growth at full plasticity. Plastic flow mechanisms and the rheological properties of the Earth's mantle are also examined, along with the fracture of glassy thermoplastics. The final chapter presents a thermodynamic model of consolidation in cohesive soils. This monograph will be a valuable resource for students and practitioners of mechanical engineering, metallurgy, materials science, and earth sciences.
Download or read book Micromechanics of Fracture and Damage written by Luc Dormieux and published by John Wiley & Sons. This book was released on 2016-06-07 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the mechanics and physics of fractures at various scales. Based on advanced continuum mechanics of heterogeneous media, it develops a rigorous mathematical framework for single macrocrack problems as well as for the effective properties of microcracked materials. In both cases, two geometrical models of cracks are examined and discussed: the idealized representation of the crack as two parallel faces (the Griffith crack model), and the representation of a crack as a flat elliptic or ellipsoidal cavity (the Eshelby inhomogeneity problem). The book is composed of two parts: The first part deals with solutions to 2D and 3D problems involving a single crack in linear elasticity. Elementary solutions of cracks problems in the different modes are fully worked. Various mathematical techniques are presented, including Neuber-Papkovitch displacement potentials, complex analysis with conformal mapping and Eshelby-based solutions. The second part is devoted to continuum micromechanics approaches of microcracked materials in relation to methods and results presented in the first part. Various estimates and bounds of the effective elastic properties are presented. They are considered for the formulation and application of continuum micromechanics-based damage models.
Download or read book Fundamentals of Deformation and Fracture written by International Union of Theoretical and Applied Mechanics and published by Cambridge University Press. This book was released on 1985-02-07 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: An international survey of work in the field of deformation and fracture, first published in 1985.
Download or read book Fracture Mechanics written by Robert P. Wei and published by Cambridge University Press. This book was released on 2010-02-08 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture and 'slow' crack growth reflect the response of a material (i.e. its microstructure) to the conjoint actions of mechanical and chemical driving forces and are affected by temperature. There is therefore a need for quantitative understanding and modeling of the influences of chemical and thermal environments and of microstructure, in terms of the key internal and external variables, and for their incorporation into design and probabilistic implications. This text, which the author has used in a fracture mechanics course for advanced undergraduate and graduate students, is based on the work of the author's Lehigh University team whose integrative research combined fracture mechanics, surface and electrochemistry, materials science, and probability and statistics to address a range of fracture safety and durability issues on aluminum, ferrous, nickel, and titanium alloys and ceramics. Examples are included to highlight the approach and applicability of the findings in practical durability and reliability problems.
Download or read book Micromechanisms in Particle Hardened Alloys written by J. W. Martin and published by Cambridge University Press. This book was released on 1980-07-10 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was first published in 1980. A great number of metallic materials in practical use owe their strength to the presence in their microstructure of particles of a hard precipitated phase. The text emphasises the importance of scientific rather than empirical methods in attempting to develop particle-hardened alloys. The author progresses from an elementary knowledge of metallurgy to theories relating to the deformation and fracture of alloys of this type. He also discusses the use of such theories to describe observations on both model materials and practical metals. After a discussion of the microstructures of these alloys, how they form and how to describe them quantitatively, their deformation and fracture behaviour at both low and elevated temperatures are examined.
